Inspecting /boot/System.map-2.6.23-rc1mb1-g1e4dcd22 Loaded 29120 symbols from /boot/System.map-2.6.23-rc1mb1-g1e4dcd22. Symbols match kernel version 2.6.23. No module symbols loaded - kernel modules not enabled. [ 0.000000] Linux version 2.6.23-rc1mb1-g1e4dcd22 (grant@trillian) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #9 SMP PREEMPT Sat Jul 28 12:04:36 MDT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e0f4000 (usable) [ 0.000000] BIOS-e820: 000000003e0f4000 - 000000003e2f5000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e2f5000 - 000000003eebe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 96MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 254196) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 254196 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 254196 [ 0.000000] On node 0 totalpages: 254196 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 193 pages used for memmap [ 0.000000] HighMem zone: 24627 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309) [ 0.000000] ACPI: FACS 3EEC0000, 0040 [ 0.000000] ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order. Total pages: 252211 [ 0.000000] Kernel command line: root=/dev/sda6 ro [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=c04c0000 soft=c04be000 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.262 MHz processor. [ 47.324283] Console: colour VGA+ 80x25 [ 47.324287] console [tty0] enabled [ 47.329080] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 47.329500] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 47.356221] Memory: 1003100k/1016784k available (2465k kernel code, 13036k reserved, 1090k data, 244k init, 99280k highmem) [ 47.356315] virtual kernel memory layout: [ 47.356316] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) [ 47.356317] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 47.356318] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 47.356319] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 47.356320] .init : 0xc047e000 - 0xc04bb000 ( 244 kB) [ 47.356321] .data : 0xc0368565 - 0xc0478f64 (1090 kB) [ 47.356322] .text : 0xc0100000 - 0xc0368565 (2465 kB) [ 47.356839] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 47.356993] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 47.357196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 47.357436] hpet0: 3 64-bit timers, 14318180 Hz [ 47.438473] Calibrating delay using timer specific routine.. 3994.64 BogoMIPS (lpj=7989282) [ 47.438617] Security Framework v1.0.0 initialized [ 47.438695] Mount-cache hash table entries: 512 [ 47.438871] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 47.438878] monitor/mwait feature present. [ 47.438942] using mwait in idle threads. [ 47.439007] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.439115] CPU: L2 cache: 4096K [ 47.439177] CPU: Physical Processor ID: 0 [ 47.439240] CPU: Processor Core ID: 0 [ 47.439303] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 47.439311] Compat vDSO mapped to ffffe000. [ 47.439383] Checking 'hlt' instruction... OK. [ 47.454930] SMP alternatives: switching to UP code [ 47.455993] ACPI: Core revision 20070126 [ 47.458211] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 47.458381] SMP alternatives: switching to SMP code [ 47.459443] Booting processor 1/1 eip 3000 [ 47.459507] CPU 1 irqstacks, hard=c04c1000 soft=c04bf000 [ 47.470044] Initializing CPU#1 [ 47.550408] Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980123) [ 47.550414] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 47.550419] monitor/mwait feature present. [ 47.550422] CPU: L1 I cache: 32K, L1 D cache: 32K [ 47.550424] CPU: L2 cache: 4096K [ 47.550426] CPU: Physical Processor ID: 0 [ 47.550427] CPU: Processor Core ID: 1 [ 47.550428] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 47.551169] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 [ 47.551784] Total of 2 processors activated (7984.70 BogoMIPS). [ 47.552044] ENABLING IO-APIC IRQs [ 47.552302] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 47.698432] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 47.718551] Brought up 2 CPUs [ 47.718926] Time: 4:26:19 Date: 06/29/107 [ 47.719008] NET: Registered protocol family 16 [ 47.719235] ACPI: bus type pci registered [ 47.719381] PCI: Using MMCONFIG [ 47.720175] Setting up standard PCI resources [ 47.722674] ACPI: EC: EC description table is found, configuring boot EC [ 47.724318] ACPI: System BIOS is requesting _OSI(Linux) [ 47.724385] ACPI: If "acpi_osi=Linux" works better, [ 47.724386] Please send dmidecode to linux-acpi@vger.kernel.org [ 47.724899] ACPI: Interpreter enabled [ 47.724963] ACPI: (supports S0 S3 S4 S5) [ 47.725256] ACPI: Using IOAPIC for interrupt routing [ 47.731327] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00) [ 47.732075] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 47.732145] PCI quirk: region 0500-053f claimed by ICH6 GPIO [ 47.732852] PCI: Transparent bridge - 0000:00:1e.0 [ 47.732965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 47.733265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 47.733381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 47.733506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 47.740287] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 47.741014] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 47.741681] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 47.742410] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 47.743079] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 47.743848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 47.744617] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 47.745285] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 47.745963] Linux Plug and Play Support v0.97 (c) Adam Belay [ 47.746057] pnp: PnP ACPI init [ 47.746125] ACPI: bus type pnp registered [ 47.747964] pnp: PnP ACPI: found 9 devices [ 47.748028] ACPI: ACPI bus type pnp unregistered [ 47.748258] SCSI subsystem initialized [ 47.748358] libata version 2.21 loaded. [ 47.748480] usbcore: registered new interface driver usbfs [ 47.748597] usbcore: registered new interface driver hub [ 47.748700] usbcore: registered new device driver usb [ 47.748957] PCI: Using ACPI for IRQ routing [ 47.749021] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 47.766294] Time: tsc clocksource has been installed. [ 47.778544] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 47.778627] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 47.778709] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 47.778792] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 47.778879] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 47.809285] PCI: Bridge: 0000:00:1c.0 [ 47.809350] IO window: 1000-1fff [ 47.809416] MEM window: 50200000-502fffff [ 47.809481] PREFETCH window: 50500000-505fffff [ 47.809549] PCI: Bridge: 0000:00:1c.1 [ 47.809611] IO window: disabled. [ 47.809676] MEM window: 50100000-501fffff [ 47.809742] PREFETCH window: disabled. [ 47.809808] PCI: Bridge: 0000:00:1e.0 [ 47.809870] IO window: disabled. [ 47.809936] MEM window: 50000000-500fffff [ 47.810001] PREFETCH window: disabled. [ 47.810087] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 47.810216] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 47.810236] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 [ 47.811137] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 47.811148] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 47.811158] NET: Registered protocol family 2 [ 47.850489] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 47.850622] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 47.851467] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 47.851865] TCP: Hash tables configured (established 131072 bind 65536) [ 47.851934] TCP reno registered [ 47.863121] audit: initializing netlink socket (disabled) [ 47.863196] audit(1185683179.380:1): initialized [ 47.863357] highmem bounce pool size: 64 pages [ 47.865979] VFS: Disk quotas dquot_6.5.1 [ 47.866100] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 47.866432] io scheduler noop registered [ 47.866507] io scheduler cfq registered (default) [ 47.866579] Boot video device is 0000:00:02.0 [ 47.866861] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 47.866909] assign_interrupt_mode Found MSI capability [ 47.867012] Allocate Port Service[0000:00:1c.0:pcie00] [ 47.867048] Allocate Port Service[0000:00:1c.0:pcie02] [ 47.867083] Allocate Port Service[0000:00:1c.0:pcie03] [ 47.867173] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 47.867221] assign_interrupt_mode Found MSI capability [ 47.867320] Allocate Port Service[0000:00:1c.1:pcie00] [ 47.867357] Allocate Port Service[0000:00:1c.1:pcie02] [ 47.867391] Allocate Port Service[0000:00:1c.1:pcie03] [ 47.867642] ACPI: AC Adapter [ADP1] (on-line) [ 47.868106] ACPI: Battery Slot [BAT0] (battery present) [ 47.868283] input: Power Button (FF) as /class/input/input0 [ 47.868351] ACPI: Power Button (FF) [PWRF] [ 47.868477] input: Lid Switch as /class/input/input1 [ 47.868547] ACPI: Lid Switch [LID0] [ 47.868668] input: Power Button (CM) as /class/input/input2 [ 47.868734] ACPI: Power Button (CM) [PWRB] [ 47.868856] input: Sleep Button (CM) as /class/input/input3 [ 47.868923] ACPI: Sleep Button (CM) [SLPB] [ 47.869378] ACPI: SSDT 3EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 47.869736] ACPI: SSDT 3EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 47.870144] Monitor-Mwait will be used to enter C-1 state [ 47.870147] Monitor-Mwait will be used to enter C-2 state [ 47.870149] Monitor-Mwait will be used to enter C-3 state [ 47.870167] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 47.870408] ACPI: Processor [CPU0] (supports 8 throttling states) [ 47.870791] ACPI: SSDT 3EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 47.871135] ACPI: SSDT 3EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 47.871574] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 47.871815] ACPI: Processor [CPU1] (supports 8 throttling states) [ 47.873724] Marking TSC unstable due to: possible TSC halt in C2. [ 47.874171] Time: hpet clocksource has been installed. [ 47.874247] Switched to high resolution mode on CPU 0 [ 47.874267] Switched to high resolution mode on CPU 1 [ 47.908604] Real Time Clock Driver v1.12ac [ 47.908916] hpet_resources: 0xfed00000 is busy [ 47.908942] Linux agpgart interface v0.102 [ 47.909065] agpgart: Detected an Intel 945GM Chipset. [ 47.910591] agpgart: Detected 16124K stolen memory. [ 47.926048] agpgart: AGP aperture is 256M @ 0x40000000 [ 47.926233] ipmi message handler version 39.1 [ 47.926301] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets [ 47.926388] intelfb: Version 0.9.4 [ 47.926548] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 47.926679] intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 16124kB [ 47.928867] intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. [ 47.929047] intelfb: Video mode must be programmed at boot time. [ 47.931869] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 47.932555] loop: module loaded [ 47.932718] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 47.932850] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 47.932877] sky2 0000:01:00.0: v1.16 addr 0x50200000 irq 17 Yukon-EC (0xb6) rev 2 [ 47.933234] sky2 eth0: addr 00:17:f2:f5:aa:1f [ 47.933485] input: Macintosh mouse button emulation as /class/input/input4 [ 47.934000] ata_piix 0000:00:1f.1: version 2.11 [ 47.934012] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 47.934163] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 47.934275] scsi0 : ata_piix [ 47.934470] scsi1 : ata_piix [ 47.934604] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14 [ 47.934688] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15 [ 47.940081] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KBV9, max UDMA/66 [ 47.942079] ata1.00: configured for UDMA/66 [ 47.943783] Clocksource tsc unstable (delta = -493154665 ns) [ 47.957073] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KBV9 PQ: 0 ANSI: 5 [ 47.957370] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 47.960897] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 47.961066] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 47.961165] scsi2 : ata_piix [ 47.961367] scsi3 : ata_piix [ 47.961502] ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma 0x000120a0 irq 19 [ 47.961586] ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma 0x000120a8 irq 19 [ 47.993949] ata3.01: ATA-7: TOSHIBA MK1234GSX, AH008B, max UDMA/100 [ 47.994023] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/8) [ 47.995255] ata3.01: configured for UDMA/100 [ 48.007285] scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 [ 48.007544] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 48.007625] sd 2:0:1:0: [sda] Write Protect is off [ 48.007690] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 48.007707] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 48.007831] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 48.007907] sd 2:0:1:0: [sda] Write Protect is off [ 48.007989] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 48.008005] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 48.008092] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 48.072777] sd 2:0:1:0: [sda] Attached SCSI disk [ 48.073256] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 20 [ 48.073388] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 48.073391] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 48.073622] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 48.073733] ehci_hcd 0000:00:1d.7: debug port 1 [ 48.073801] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 48.073810] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x50445400 [ 48.077747] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 48.078106] usb usb1: configuration #1 chosen from 1 choice [ 48.078254] hub 1-0:1.0: USB hub found [ 48.078322] hub 1-0:1.0: 8 ports detected [ 48.082483] USB Universal Host Controller Interface driver v3.0 [ 48.082616] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 48.082745] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 48.082748] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 48.082947] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 48.083054] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080 [ 48.083352] usb usb2: configuration #1 chosen from 1 choice [ 48.083480] hub 2-0:1.0: USB hub found [ 48.083548] hub 2-0:1.0: 2 ports detected [ 48.093712] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 48.093842] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 48.093845] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 48.094033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 48.094139] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 [ 48.094431] usb usb3: configuration #1 chosen from 1 choice [ 48.094562] hub 3-0:1.0: USB hub found [ 48.094629] hub 3-0:1.0: 2 ports detected [ 48.104939] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 48.105068] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 48.105071] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 48.105258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 48.105367] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 [ 48.105653] usb usb4: configuration #1 chosen from 1 choice [ 48.105781] hub 4-0:1.0: USB hub found [ 48.105848] hub 4-0:1.0: 2 ports detected [ 48.114783] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 48.127945] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 [ 48.128074] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 48.128077] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 48.128267] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 48.128377] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00002020 [ 48.128660] usb usb5: configuration #1 chosen from 1 choice [ 48.128789] hub 5-0:1.0: USB hub found [ 48.128858] hub 5-0:1.0: 2 ports detected [ 48.158977] usb 1-1: configuration #1 chosen from 1 choice [ 48.159226] hub 1-1:1.0: USB hub found [ 48.159392] hub 1-1:1.0: 2 ports detected [ 48.653835] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 48.786290] usb 1-4: configuration #1 chosen from 1 choice [ 49.633237] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 49.819551] usb 2-2: configuration #1 chosen from 1 choice [ 50.196898] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 50.379023] usb 4-2: configuration #1 chosen from 1 choice [ 50.620634] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 50.801782] usb 5-1: configuration #1 chosen from 1 choice [ 51.004471] usb 1-1.1: new high speed USB device using ehci_hcd and address 7 [ 51.096893] usb 1-1.1: configuration #1 chosen from 1 choice [ 51.097105] hub 1-1.1:1.0: USB hub found [ 51.097304] hub 1-1.1:1.0: 4 ports detected [ 51.400241] usb 1-1.2: new full speed USB device using ehci_hcd and address 8 [ 51.495590] usb 1-1.2: configuration #1 chosen from 1 choice [ 51.495909] hub 1-1.2:1.0: USB hub found [ 51.496312] hub 1-1.2:1.0: 3 ports detected [ 51.800041] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 9 [ 51.979190] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 52.179832] usb 1-1.1.2: new full speed USB device using ehci_hcd and address 10 [ 52.367661] usb 1-1.1.2: configuration #3 chosen from 1 choice [ 52.575608] usb 1-1.1.4: new full speed USB device using ehci_hcd and address 11 [ 52.673977] usb 1-1.1.4: configuration #1 chosen from 1 choice [ 52.875574] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 12 [ 52.972818] usb 1-1.2.2: configuration #1 chosen from 1 choice [ 53.171408] usb 1-1.2.3: new full speed USB device using ehci_hcd and address 13 [ 53.270216] usb 1-1.2.3: configuration #1 chosen from 1 choice [ 53.271512] usbcore: registered new interface driver libusual [ 53.271870] PNP: No PS/2 controller found. Probing ports directly. [ 53.272807] i8042.c: No controller found. [ 53.273088] mice: PS/2 mouse device common for all mice [ 53.273232] applesmc: Apple MacBook detected: [ 53.273300] applesmc: - Model with accelerometer [ 53.273366] applesmc: - Model without light sensors and backlight [ 53.273435] applesmc: - Model with 12 temperature sensors [ 53.327566] applesmc: device successfully initialized (0xe0, 0x00). [ 53.327568] applesmc: device successfully initialized. [ 53.328727] applesmc: 1 fans found. [ 53.330200] input: applesmc as /class/input/input5 [ 53.330345] applesmc: driver successfully loaded. [ 53.330515] usbcore: registered new interface driver hiddev [ 53.380649] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 53.380737] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 53.383417] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7 [ 53.383514] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 53.499334] input: HID 05ac:1000 as /class/input/input8 [ 53.499402] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 53.517320] input: HID 05ac:1000 as /class/input/input9 [ 53.517422] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 53.519326] input: Logitech Logitech USB Headset as /class/input/input10 [ 53.519441] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-1.1.4 [ 53.522243] input: Logitech USB-PS/2 Optical Mouse as /class/input/input11 [ 53.522350] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2 [ 53.525902] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input12 [ 53.526008] input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.7-1.2.3 [ 53.530563] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input13 [ 53.530698] input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.7-1.2.3 [ 53.530925] usbcore: registered new interface driver usbhid [ 53.530993] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 53.531152] TCP cubic registered [ 53.531222] NET: Registered protocol family 1 [ 53.532006] Starting balanced_irq [ 53.532096] Using IPI No-Shortcut mode [ 53.532264] Magic number: 15:979:414 [ 53.559168] EXT3-fs: INFO: recovery required on readonly filesystem. [ 53.559242] EXT3-fs: write access will be enabled during recovery. [ 58.040447] kjournald starting. Commit interval 5 seconds [ 58.040462] EXT3-fs: sda6: orphan cleanup on readonly fs [ 58.040469] ext3_orphan_cleanup: deleting unreferenced inode 133091 [ 58.061384] EXT3-fs: sda6: 1 orphan inode deleted [ 58.061448] EXT3-fs: recovery complete. [ 58.101247] EXT3-fs: mounted filesystem with ordered data mode. [ 58.101336] VFS: Mounted root (ext3 filesystem) readonly. [ 58.101559] Freeing unused kernel memory: 244k freed [ 66.439114] sky2 eth0: enabling interface [ 66.454470] sky2 eth0: ram buffer 48K [ 67.387008] iTCO_vendor_support: vendor-support=0 [ 67.402414] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 67.402555] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) [ 67.402656] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 67.492412] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 67.492505] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 67.515137] ath_hal: module license 'Proprietary' taints kernel. [ 67.515906] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) [ 67.691675] wlan: 0.8.4.2 (svn r2592) [ 67.724798] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray [ 67.724877] Uniform CD-ROM driver Revision: 3.20 [ 67.725021] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 67.739371] appletouch Geyser 3 inited. [ 67.739488] input: appletouch as /class/input/input14 [ 67.739610] usbcore: registered new interface driver appletouch [ 67.847317] cdc_acm 1-1.1.2:3.1: ttyACM0: USB ACM device [ 67.850691] cdc_acm 1-1.1.2:3.3: ttyACM1: USB ACM device [ 67.853011] usbcore: registered new interface driver cdc_acm [ 67.853086] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters [ 67.870766] ath_pci: 0.9.4.5 (svn r2592) [ 67.870882] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 67.871023] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 67.926701] intel_rng: FWH not detected [ 67.951267] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 67.967966] NET: Registered protocol family 17 [ 68.000119] ath_pci: switching rfkill capability off [ 68.009362] usb0: register 'cdc_ether' at usb-0000:00:1d.7-1.1.2, CDC Ethernet Device, 02:80:37:0b:03:00 [ 68.009470] usbcore: registered new interface driver cdc_ether [ 68.039165] ath_rate_sample: 1.2 (svn r2592) [ 68.039650] ath_pci: switching per-packet transmit power control off [ 68.039833] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 68.040329] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 68.040614] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 68.041278] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 68.041754] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 68.042227] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 68.042508] wifi0: mac 12.10 phy 8.1 radio 12.0 [ 68.042661] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 68.042728] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 68.042792] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 68.042856] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 68.042921] wifi0: Use hw queue 8 for CAB traffic [ 68.042999] wifi0: Use hw queue 9 for beacons [ 68.101828] wifi0: Atheros 5418: mem=0x50100000, irq=16 [ 68.101957] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 68.173937] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0 [ 68.414301] usbcore: registered new interface driver snd-usb-audio [ 68.463085] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 68.463235] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 68.495128] hda_codec: STAC922x, Apple subsys_id=106b2200 [ 68.673733] firewire_core: created new fw device fw0 (0 config rom retries, S400) [ 68.678021] lp: driver loaded but no devices found [ 68.746082] Adding 4690972k swap on /dev/disk/by-uuid/a6ee3880-aa0d-43a9-859d-1ae554926afe. Priority:-1 extents:1 across:4690972k [ 68.814898] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 68.883999] EXT3 FS on sda6, internal journal [ 73.870467] NET: Registered protocol family 10 [ 73.870539] lo: Disabled Privacy Extensions [ 75.016593] kjournald starting. Commit interval 5 seconds [ 75.016962] EXT3 FS on sda5, internal journal [ 75.016970] EXT3-fs: mounted filesystem with ordered data mode. [ 75.035944] kjournald starting. Commit interval 5 seconds [ 75.036382] EXT3 FS on sda7, internal journal [ 75.036388] EXT3-fs: mounted filesystem with ordered data mode. [ 77.788559] Capability LSM initialized [ 78.534540] ppdev: user-space parallel port driver [ 80.738151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 80.900427] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 80.915235] NFSD: starting 90-second grace period [ 82.339528] [drm] Initialized drm 1.1.0 20060810 [ 82.367815] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 83.895647] Bluetooth: Core ver 2.11 [ 83.895803] NET: Registered protocol family 31 [ 83.896060] Bluetooth: HCI device and connection manager initialized [ 83.896417] Bluetooth: HCI socket layer initialized [ 83.937903] Bluetooth: L2CAP ver 2.8 [ 83.937907] Bluetooth: L2CAP socket layer initialized [ 84.128681] Bluetooth: RFCOMM socket layer initialized [ 84.128756] Bluetooth: RFCOMM TTY layer initialized [ 84.128760] Bluetooth: RFCOMM ver 1.8 [ 84.352169] usb 5-1: USB disconnect, address 2 [ 84.591927] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 84.790385] usb 5-1: configuration #1 chosen from 1 choice [ 84.858873] Bluetooth: HCI USB driver ver 2.9 [ 84.862029] usbcore: registered new interface driver hci_usb [ 94.218585] eth0: no IPv6 routers present [ 165.489630] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 165.658623] ISO 9660 Extensions: RRIP_1991A [31789.433005] usb 1-1.2.2: USB disconnect, address 12 [31794.362660] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 15 [31794.460418] usb 1-1.2.2: configuration #1 chosen from 1 choice [31794.464251] input: Logitech USB-PS/2 Optical Mouse as /class/input/input15 [31794.465100] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2 [32596.458613] keyboard.c: can't emulate rawmode for keycode 240 [32596.570530] keyboard.c: can't emulate rawmode for keycode 240 [32597.801877] keyboard.c: can't emulate rawmode for keycode 240 [32598.025726] keyboard.c: can't emulate rawmode for keycode 240 [32598.217642] keyboard.c: can't emulate rawmode for keycode 240 [32598.714939] keyboard.c: can't emulate rawmode for keycode 240 [32598.750935] keyboard.c: can't emulate rawmode for keycode 240 [32598.786909] keyboard.c: can't emulate rawmode for keycode 240 [32598.822872] keyboard.c: can't emulate rawmode for keycode 240 [32598.858866] keyboard.c: can't emulate rawmode for keycode 240 [32622.484216] printk: 3 messages suppressed. [32622.484224] keyboard.c: can't emulate rawmode for keycode 240 [32622.516213] keyboard.c: can't emulate rawmode for keycode 240 [32622.516225] keyboard.c: can't emulate rawmode for keycode 240 [32622.548176] keyboard.c: can't emulate rawmode for keycode 240 [32622.548191] keyboard.c: can't emulate rawmode for keycode 240 [32628.137737] usb 1-1.2.2: USB disconnect, address 15 [32629.742112] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 16 [32629.839998] usb 1-1.2.2: configuration #1 chosen from 1 choice [32629.843714] input: Logitech USB-PS/2 Optical Mouse as /class/input/input16 [32629.844152] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2 [32634.229727] drivers/hid/usbhid/hid-core.c: input irq status -75 received