6896k available (1556k kernel code, 24352k reserved, 545k data, 168k init, 1179392k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffaf000 - 0xfffff000   ( 320 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0310000 - 0xc033a000   ( 168 kB)
      .data : 0xc0285011 - 0xc030d70c   ( 545 kB)
      .text : 0xc0100000 - 0xc0285011   (1556 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4824.67 BogoMIPS (lpj=2412339)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011d
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011d
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 01
Checking 'hlt' instruction... OK.
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:08.0
PCI: Using IRQ router default [10de/0441] at 0000:00:01.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:07.0[B] -> IRQ 11
PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 5
PCI->APIC IRQ transform: 0000:01:08.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 11
PCI: Bridge: 0000:00:08.0
  IO window: d000-dfff
  MEM window: dbf00000-dbffffff
Time: tsc clocksource has been installed.
  PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: e000-efff
  MEM window: dc000000-dfffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4591k freed
highmem bounce pool size: 64 pages
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:04:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
3c59x: Donald Becker and others.
0000:01:08.0: 3Com PCI 3c905B Cyclone 100baseTx at f8800c00.
ahci 0000:00:0a.0: version 2.2
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit led clo pmp pio 
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf8804100 ctl 0x00000000 bmdma 0x00000000 irq 5
ata2: SATA max UDMA/133 cmd 0xf8804180 ctl 0x00000000 bmdma 0x00000000 irq 5
ata3: SATA max UDMA/133 cmd 0xf8804200 ctl 0x00000000 bmdma 0x00000000 irq 5
ata4: SATA max UDMA/133 cmd 0xf8804280 ctl 0x00000000 bmdma 0x00000000 irq 5
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
ata2.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     ATA      WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 156250000 512-byte hardware sectors (80000 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 156250000 512-byte hardware sectors (80000 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
pata_amd 0000:00:09.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata5.00: ATAPI: LITE-ON COMBO SOHC-5232K, NK0H, max UDMA/44
ata5.00: configured for UDMA/44
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM            LITE-ON  COMBO SOHC-5232K NK0H PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 19
input: PS/2 Logitech Mouse as /class/input/input2
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 168k freed