| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6278d2220708020348k26ac2293v648442f2281eca70@mail.gmail.com>
Date: Thu, 2 Aug 2007 11:48:05 +0100
From: "Daniel J Blueman" <daniel.blueman@...il.com>
To: jgarzik@...ox.com, linux-ide@...r.kernel.org
Cc: "Linux Kernel" <linux-kernel@...r.kernel.org>
Subject: ICH8 CF timeout (regression)...
I'm experiencing timeouts with libata when reading from a compact
flash card connected to onboard IDE. Reproducible with 2.6.20, 2.6.22,
2.6.23-rc1, with both short cable and a on-mobo CF socket on a x86-64
Core2Duo.
Sometimes (~7%), we see some EH and the interface stablises, then the
system continues to work as expected [1] (35MB/s DMA from the CF), but
most of the time, it goes nowhere [2].
When running with legacy ATA support, the system consistently works
fine (but without DMA). CF [3] and controller [4] info supplied.
I'll grab kernel logs from the legacy ATA boot; what else can help
debug this issue? No problem testing patches too.
Daniel
--- [1]
[ 0.000000] Linux version 2.6.22-8-generic (buildd@...low) (gcc
version 4.1.3 20070629 (prerelease) (Ubuntu 4.1.2-13ubuntu2)) #1 SMP
Thu Jul 12 16:09:47 GMT 2007
...
[ 23.987509] ata_piix 0000:00:1f.2: version 2.11
[ 23.987514] ata_piix 0000:00:1f.2: MAP [ IDE IDE -- -- ]
[ 23.987835] scsi0 : ata_piix
[ 23.987903] scsi1 : ata_piix
[ 23.987960] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl
0x00000000000103f6 bmdma 0x000000000001f800 irq 14
[ 23.988015] ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl
0x0000000000010376 bmdma 0x000000000001f808 irq 15
[ 24.306364] ata2.00: CFA: SanDisk SDCFX-4096, HDX 4.04, max UDMA/66
[ 24.306408] ata2.00: 8027712 sectors, multi 0: LBA
[ 24.306446] ata2.00: applying bridge limits
[ 24.306971] ata2.00: configured for UDMA/66
[ 24.307086] scsi 1:0:0:0: Direct-Access ATA SanDisk
SDCFX-40 HDX PQ: 0 ANSI: 5
[ 24.311383] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 24.311435] sd 1:0:0:0: [sda] Write Protect is off
[ 24.311474] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.311487] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.311585] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 24.311634] sd 1:0:0:0: [sda] Write Protect is off
[ 24.311673] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.311685] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.311740] sda: sda1 sda2 sda3
[ 24.312962] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 24.316318] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 24.350048] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.350097] ata2.00: (BMDMA stat 0x24)
[ 24.350142] ata2.00: cmd c8/00:07:d2:b7:72/00:00:00:00:00/e0 tag 0
cdb 0x0 data 3584 in
[ 24.350144] res 51/84:00:d8:b7:72/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.350266] ata2: soft resetting port
[ 24.508020] ata2.00: configured for UDMA/66
[ 24.508068] ata2: EH complete
[ 24.509290] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 24.509572] sd 1:0:0:0: [sda] Write Protect is off
[ 24.509612] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.509974] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.539976] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.552259] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.552307] ata2.00: (BMDMA stat 0x24)
[ 24.552351] ata2.00: cmd c8/00:08:59:13:00/00:00:00:00:00/e0 tag 0
cdb 0x0 data 4096 in
[ 24.552354] res 51/84:00:60:13:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.552473] ata2: soft resetting port
[ 24.712647] ata2.00: configured for UDMA/66
[ 24.712687] ata2: EH complete
[ 24.713173] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 24.713462] sd 1:0:0:0: [sda] Write Protect is off
[ 24.713505] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.713769] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.726935] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.726983] ata2.00: (BMDMA stat 0x24)
[ 24.727028] ata2.00: cmd c8/00:20:01:c4:06/00:00:00:00:00/e0 tag 0
cdb 0x0 data 16384 in
[ 24.727031] res 51/84:00:20:c4:06/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.727151] ata2: soft resetting port
[ 24.881089] ata2.00: configured for UDMA/66
[ 24.881128] ata2: EH complete
[ 24.881944] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 24.882420] sd 1:0:0:0: [sda] Write Protect is off
[ 24.882463] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.884157] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.886454] ata2.00: limiting speed to UDMA/44:PIO4
[ 24.886497] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 24.886542] ata2.00: (BMDMA stat 0x24)
[ 24.886586] ata2.00: cmd c8/00:90:71:c4:06/00:00:00:00:00/e0 tag 0
cdb 0x0 data 73728 in
[ 24.886588] res 51/84:00:00:c5:06/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 24.886705] ata2: soft resetting port
[ 25.041843] ata2.00: configured for UDMA/44
[ 25.041882] ata2: EH complete
[ 25.044050] sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
[ 25.045202] sd 1:0:0:0: [sda] Write Protect is off
[ 25.045241] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.045880] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
<continues to boot and work fine from here>
--- [2]
Linux version 2.6.23-rc1-101 (root@x1) (gcc version 4.1.3 20070718
(prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 Wed Aug 1 23:03:47 BST 2007
...
ata_piix 0000:00:1f.2: MAP [ IDE IDE -- -- ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6
bmdma 0x000000000001f800 irq 14
ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376
bmdma 0x000000000001f808 irq 15
ata2.00: CFA: SanDisk SDCFX-4096, HDX 4.04, max UDMA/66
ata2.00: 8027712 sectors, multi 0: LBA
ata2.00: applying bridge limits
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA SanDisk SDCFX-40 HDX PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sda] 8027712 512-byte hardware sectors (4110 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sda:<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/66
ata2: EH complete
<repeats>
ata2.00: limiting speed to UDMA/44:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/44
ata2: EH complete
<epeats>
sd 1:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 1:0:0:0: [sda] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/44
ata2: EH complete
ata2.00: limiting speed to UDMA/33:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
--- [3]
# hdparm -i /dev/sda
/dev/sda:
Model=SanDisk SDCFX-4096 , FwRev=HDX 4.04,
SerialNo= 116802D2807J3335
Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
RawCHS=7964/16/63, TrkSize=0, SectSize=576, ECCbytes=4
BuffType=DualPort, BuffSize=1kB, MaxMultSect=4, MultSect=?0?
CurCHS=7964/16/63, CurSects=8027712, LBA=yes, LBAsects=8027712
IORDY=no, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 *udma3 udma4
AdvancedPM=no WriteCache=disabled
Drive conforms to: Unspecified: ATA/ATAPI-4
* signifies the current active mode
# hdparm -I /dev/sda
/dev/sda:
CompactFlash ATA device, with removable media
Model Number: SanDisk SDCFX-4096
Serial Number: 116802D2807J3335
Firmware Revision: HDX 4.04
Standards:
Supported: 4
Likely used: 4
Configuration:
Logical max current
cylinders 7964 7964
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 8027712
LBA user addressable sectors: 8027712
device size with M = 1024*1024: 3919 MBytes
device size with M = 1000*1000: 4110 MBytes (4 GB)
Capabilities:
LBA, IORDY(may be)(cannot be disabled)
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 4 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 *udma3 udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
Write cache
* CFA feature set
* CFA advanced modes: pio5 *pio6
--- [4]
# lspci -vvv
00:1f.2 IDE interface: Intel Corporation Mobile SATA IDE Controller
(rev 03) (prog-if 80 [Master])
Subsystem: Intel Corporation Mobile SATA IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f800 [size=16]
Region 5: I/O ports at f700 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Daniel J Blueman
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists