p: 00:03: ioport range 0x880-0x8bf has been reserved pnp: 00:03: ioport range 0x8c0-0x8df has been reserved pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved pnp: 00:04: iomem range 0xfa000000-0xfbffffff has been reserved pnp: 00:09: ioport range 0x900-0x91f has been reserved pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved pnp: 00:0e: ioport range 0xbf40-0xbf5f has been reserved pnp: 00:0f: iomem range 0xfebffc00-0xfebfffff has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fc000000-fdffffff PREFETCH window: d8000000-e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0000e000-0000e0ff IO window: 0000e400-0000e4ff PREFETCH window: 50000000-53ffffff MEM window: f4000000-f7ffffff PCI: Bus 7, cardbus bridge: 0000:02:01.1 IO window: 0000e800-0000e8ff IO window: 0000fc00-0000fcff PREFETCH window: 54000000-57ffffff MEM window: 5c000000-5fffffff PCI: Bridge: 0000:00:1e.0 IO window: e000-ffff MEM window: f4000000-fbffffff PREFETCH window: 50000000-59ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:02:01.1 (0000 -> 0003) ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages SGI XFS with no debug enabled io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 5120k, total 65536k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:f120 vesafb: pmi: set display start = c00cf165, set palette = c00cf1ea vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Battery Slot [BAT1] (battery present) input: Lid Switch as /class/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (35 C) Real Time Clock Driver v1.12ac Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. 0000:02:00.0: 3Com PCI 3c905C Tornado at f8808c00. ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. ata1.00: ATA-5: IC25T060ATCS05-0, CA8OA72A, max UDMA/100 ata1.00: 117210240 sectors, multi 8: LBA ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4240N, D110, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA IC25T060ATCS05-0 CA8O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N D110 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 input: PC Speaker as /class/input/input4 Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50475 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801CA-ICH3 with CS4205 at irq 5 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 176k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb eth0: setting half-duplex. Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d5] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64 usb 1-1: new low speed USB device using uhci_hcd and address 2 nvidia: module license 'NVIDIA' taints kernel. Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d5] Yenta: Using CSCINT to route CSC interrupts to PCI usb 1-1: configuration #1 chosen from 1 choice Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000020 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7184 Tue Aug 1 18:38:58 PDT 2006 ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 input: Logitech USB Optical Mouse as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver firewire_ohci: Added fw-ohci device 0000:02:01.2, OHCI version 1.0 firewire_core: created new fw device fw0 (0 config rom retries) pccard: CardBus card inserted into slot 1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:07:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:07:00.0 to 64 ohci_hcd 0000:07:00.0: OHCI Host Controller ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:07:00.0: irq 11, io mem 0x5c000000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected PCI: Enabling device 0000:07:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:07:00.1 to 64 ohci_hcd 0000:07:00.1: OHCI Host Controller ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:07:00.1: irq 11, io mem 0x5c001000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:07:00.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.2[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:07:00.2: EHCI Host Controller ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5 usb 3-2: new full speed USB device using ohci_hcd and address 2 ehci_hcd 0000:07:00.2: irq 11, io mem 0x5c002000 ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected usb 5-3: new high speed USB device using ehci_hcd and address 2 fuse init (API version 7.8) Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k usb 5-3: configuration #1 chosen from 1 choice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Clocksource tsc unstable (delta = -140889402 ns) ieee80211_crypt: registered algorithm 'NULL' Linux kernel driver for RTL8187 based WLAN cards Copyright (c) 2004-2005, Andrea Merello rtl8187: Initializing module rtl8187: Wireless extensions version 22 rtl8187: Initializing proc filesystem rtl8187: Enabling 14 channels. rtl8187: MAC chip version: 04 rtl8187: Card type: AD rtl8187: Reported EEPROM chip is a 93c46 (1Kbit) rtl8187: Card MAC address is 00:0e:2e:c6:07:53 rtl8187: RF Chip ID: 05 rtl8187: Card reports RF frontend Realtek 8225 rtl8187: WW:This driver has EXPERIMENTAL support for this chipset. rtl8187: WW:use it with care and at your own risk and rtl8187: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it rtl8187: This seems a new V2 radio rtl8187: PAPE from CONFIG2: 0 rtl8187: Driver probe completed usbcore: registered new interface driver rtl8187 ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' rtl8187: Card successfully reset rtl8187: RR:84 BRSR: a1ff enabling WPA GOT WX GET SCAN WX_SEM LOCKGOT WX GET SCAN WX_SEM LOCKenabling WPA Linking with "zipfy" rate: 11 MBit Linking with "zipfy" rate: 11 MBit Associated successfully Using 11 MBit GOT WX GET SCAN WX_SEM LOCKenabling WPA Linking with "zipfy" rate: 11 MBit Linking with "zipfy" rate: 11 MBit Associated successfully Using 11 MBit TKIP: replay detected: STA=00:17:9a:61:01:9d previous TSC 000000000000 received TSC 000000000000 rtl8187: RX process aborted due to explicit shutdown rtl8187: RX process aborted due to explicit shutdown rtl8187: RX process aborted due to explicit shutdown rtl8187: Card successfully reset rtl8187: RR:84 BRSR: f1ff Linking with "zipfy" rate: 11 MBit enabling WPA Associated successfully Using 11 MBit GOT WX GET SCAN WX_SEM LOCK<7>TKIP: replay detected: STA=00:17:9a:61:01:9d previous TSC 000000000000 received TSC 000000000000 rtl8187: RX process aborted due to explicit shutdown rtl8187: RX process aborted due to explicit shutdown rtl8187: RX process aborted due to explicit shutdown rtl8187: Card successfully reset rtl8187: RR:84 BRSR: f1ff Linking with "zipfy" rate: 11 MBit GOT WX GET SCAN WX_SEM LOCKenabling WPA Linking with "zipfy" rate: 11 MBit Linking with "zipfy" rate: 11 MBit ------------[ cut here ]------------ kernel BUG at include/linux/timer.h:153! invalid opcode: 0000 [#1] PREEMPT Modules linked in: michael_mic ieee80211_crypt_tkip_rtl ieee80211_crypt_ccmp_rtl r8187 ieee80211_rtl ieee80211_crypt_rtl speedstep_ich speedstep_lib dm_crypt dm_mod fuse firewire_sbp2 ehci_hcd ohci_hcd pcmcia firmware_class usbhid firewire_ohci firewire_core nvidia(P) yenta_socket rsrc_nonstatic pcmcia_core crc_itu_t uhci_hcd floppy usbcore CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010286 (2.6.22 #3) EIP is at ieee80211_associate_step1_rtl7+0x257/0x28d [ieee80211_rtl] eax: f2be5ae8 ebx: c045be90 ecx: f2be5cf8 edx: ffffffff esi: f2be53a0 edi: f741b380 ebp: 00000202 esp: f38a9f68 ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068 Process Ieee80211/0 (pid: 2635, ti=f38a8000 task=f38c8570 task.ti=f38a8000) Stack: ffffffff f2e9c210 f2be5b88 f2be53a0 f1bc11c0 f8f2600c f8f2606e f2be5b8c f2be5b88 c01276a6 001e8480 00000000 0000001d c0456198 f1bc11c8 f1bc11c0 c0127c55 00000000 c0127cf2 00000000 f38c8570 c012a784 f38a9fc0 f38a9fc0 Call Trace: [] ieee80211_associate_procedure_wq_rtl7+0x0/0x78 [ieee80211_rtl] [] ieee80211_associate_procedure_wq_rtl7+0x62/0x78 [ieee80211_rtl] [] run_workqueue+0x84/0x135 [] worker_thread+0x0/0xfb [] worker_thread+0x9d/0xfb [] autoremove_wake_function+0x0/0x37 [] worker_thread+0x0/0xfb [] kthread+0x33/0x54 [] kthread+0x0/0x54 [] kernel_thread_helper+0x7/0x18 ======================= Code: 43 c7 e9 5b ff ff ff 66 c7 86 c4 05 00 00 00 00 e9 2b ff ff ff 89 fa 89 f0 e8 b8 c3 ff ff eb c5 66 c7 86 c4 05 00 00 00 00 eb 9d <0f> 0b eb fe b9 fd 5c f2 f8 ba 1e 00 00 00 89 f8 e8 13 ca 3c c7 EIP: [] ieee80211_associate_step1_rtl7+0x257/0x28d [ieee80211_rtl] SS:ESP 0068:f38a9f68 usb 5-3: USB disconnect, address 2 rtl8187: EE:cannot submit RX command. URB_STATUS ffffff94