Initializing container subsys cpuset Linux version 2.6.22-rc6-mm1 (rob@newcastle.ss.shawcable.net) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #2 SMP Thu Jun 28 18:35:46 CST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 acpi_use_timer_override apic=verbose BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000F7C80, 0014 (r0 Nvidia) ACPI: RSDT 7FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 7FFF3180, 69D6 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF9C80, 01CA (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG 7FFF9EC0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7FFF9BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fff0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fff0000 sizeof(struct page) = 56 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524272 On node 0 totalpages: 524175 DMA zone: 56 pages used for memmap DMA zone: 1482 pages reserved DMA zone: 2461 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 513065 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fb000 ( fee00000) mapped IOAPIC to ffffffffff5fa000 (00000000fec00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41928 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515526 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi_use_timer_override apic=verbose Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.333 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ 620000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2058044k/2097088k available (2405k kernel code, 38656k reserved, 2067k data, 340k init) Calibrating delay using timer specific routine.. 4423.96 BogoMIPS (lpj=2211984) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0<7>IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) , 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. ... lapic delta = 1256244 ... PM timer delta = 357899 ... PM timer result ok ..... delta 1256244 ..... mult: 53963471 ..... calibration result: 200999 ..... CPU clock speed is 2210.0989 MHz. ..... host bus clock speed is 200.0999 MHz. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4421.89 BogoMIPS (lpj=2210948) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 1 0 0 0 0 1 1 33 04 003 1 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 1 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 1 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x4000-0x407f has been reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff has been reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: 00:01: iomem range 0x0-0x0 could not be reserved pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: a000-afff Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 MEM window: d4000000-d40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. Switched to high resolution mode on CPU 1 MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 9000-9fff MEM window: d0000000-d3ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3769k freed audit: initializing netlink socket (disabled) audit(1186143541.307:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] cpuidle: driver acpi_idle failed to attach to cpu 1 cpuidle: driver acpi_idle failed to attach to cpu 0 ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 340k freed Write protecting the kernel read-only data: 1708k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 IOAPIC[0]: Set routing entry (2-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xd4103000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22-rc6-mm1 ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 IOAPIC[0]: Set routing entry (2-22 -> 0x71 -> IRQ 22 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22-rc6-mm1 ehci_hcd usb usb2: SerialNumber: 0000:00:02.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 IOAPIC[0]: Set routing entry (2-21 -> 0x79 -> IRQ 21 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xffffc2000032c480 ctl 0xffffc2000032c4a0 bmdma 0x000000000001d800 irq 0 ata2: SATA max UDMA/133 cmd 0xffffc2000032c580 ctl 0xffffc2000032c5a0 bmdma 0x000000000001d808 irq 0 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 IOAPIC[0]: Set routing entry (2-20 -> 0x81 -> IRQ 20 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xffffc2000032e480 ctl 0xffffc2000032e4a0 bmdma 0x000000000001c400 irq 0 ata4: SATA max UDMA/133 cmd 0xffffc2000032e580 ctl 0xffffc2000032e5a0 bmdma 0x000000000001c408 irq 0 usb 2-2: new high speed USB device using ehci_hcd and address 3 usb 2-2: new device found, idVendor=0409, idProduct=0059 usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133 ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 usb 2-9: new high speed USB device using ehci_hcd and address 6 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-6: ST3160827AS, 3.42, max UDMA/133 ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>usb 2-9: new device found, idVendor=07cc, idProduct=0301 usb 2-9: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-9: Product: Winter Ver1.3 usb 2-9: Manufacturer: Ltd usb 2-9: SerialNumber: 972394281841 usb 2-9: configuration #1 chosen from 1 choice libusual: modprobe for usb-storage succeeded, but module is not present sda1 sd 2:0:0:0: [sda] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5 ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > sd 3:0:0:0: [sdb] Attached SCSI disk usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: new device found, idVendor=045e, idProduct=008c usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Microsoft Wireless Optical Mouse® 1.0A usb 1-1: Manufacturer: Microsoft usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input0 input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-1 usb 1-3: new full speed USB device using ohci_hcd and address 3 usb 1-3: new device found, idVendor=0451, idProduct=1446 usb 1-3: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected usb 1-4: new low speed USB device using ohci_hcd and address 4 usb 1-4: new device found, idVendor=051d, idProduct=0002 usb 1-4: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 1-4: Product: Back-UPS BR 800 FW:9.o2 .D USB FW:o2 usb 1-4: Manufacturer: American Power Conversion usb 1-4: SerialNumber: QB0419230426 usb 1-4: configuration #1 chosen from 1 choice hiddev96hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o2 .D USB FW:o2 ] on usb-0000:00:02.0-4 usb 2-2.1: new full speed USB device using ehci_hcd and address 7 usb 2-2.1: new device found, idVendor=046d, idProduct=092c usb 2-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2.1: Product: Camera usb 2-2.1: Manufacturer: usb 2-2.1: configuration #1 chosen from 1 choice usb 1-3.1: new low speed USB device using ohci_hcd and address 5 usb 1-3.1: new device found, idVendor=045e, idProduct=002b usb 1-3.1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3.1: Product: Microsoft Internet Keyboard Pro usb 1-3.1: configuration #1 chosen from 1 choice input: Microsoft Internet Keyboard Pro as /class/input/input1 input,hidraw2: USB HID v1.10 Keyboard [Microsoft Internet Keyboard Pro] on usb-0000:00:02.0-3.1 input: Microsoft Internet Keyboard Pro as /class/input/input2 input,hidraw3: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on usb-0000:00:02.0-3.1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: netlink: version 1.0.0 loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1186143547.307:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1829 types, 81 bools, 1 sens, 1024 cats security: 61 classes, 68575 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev revokefs, type revokefs), not configured for labeling SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1186143547.807:3): policy loaded auid=4294967295 audit(1186165152.271:4): avc: denied { sys_nice } for pid=639 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 audit(1186165152.271:5): avc: denied { sys_nice } for pid=596 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165152.271:6): avc: denied { sys_nice } for pid=649 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 audit(1186165152.771:7): avc: denied { sys_nice } for pid=896 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14 ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15 audit(1186165152.771:8): avc: denied { sys_nice } for pid=936 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165152.771:9): avc: denied { sys_nice } for pid=910 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. audit(1186165152.771:10): avc: denied { sys_nice } for pid=922 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata5.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS0E, max UDMA/66 ata5.00: limited to UDMA/33 due to 40-wire cable audit(1186165152.771:11): avc: denied { sys_nice } for pid=1048 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165152.771:12): avc: denied { sys_nice } for pid=936 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165152.771:13): avc: denied { sys_nice } for pid=914 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.271:14): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.271:15): avc: denied { sys_nice } for pid=922 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata5.00: configured for UDMA/33 audit(1186165153.271:16): avc: denied { sys_nice } for pid=1048 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.271:17): avc: denied { sys_nice } for pid=1048 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.271:18): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata6.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S09, max UDMA/33 audit(1186165153.271:19): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.771:20): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata6.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS0E PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg2 type 5 scsi 5:0:0:0: CD-ROM LITE-ON CD-RW SOHR-5238S 4S09 PQ: 0 ANSI: 5 scsi 5:0:0:0: Attached scsi generic sg3 type 5 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA audit(1186165153.771:21): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability nvidia: module license 'NVIDIA' taints kernel. audit(1186165153.771:22): avc: denied { sys_nice } for pid=1089 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165153.771:23): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set routing entry (2-16 -> 0x89 -> IRQ 16 Mode:1 Active:1) ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set routing entry (2-18 -> 0x91 -> IRQ 18 Mode:1 Active:1) ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007 audit(1186165154.270:24): avc: denied { sys_nice } for pid=910 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:25): avc: denied { sys_nice } for pid=936 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:26): avc: denied { sys_nice } for pid=896 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:27): avc: denied { sys_nice } for pid=1048 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:28): avc: denied { sys_nice } for pid=914 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:29): avc: denied { sys_nice } for pid=922 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:30): avc: denied { sys_nice } for pid=1089 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:31): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:32): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:33): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:34): avc: denied { sys_nice } for pid=1044 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.270:35): avc: denied { sys_nice } for pid=1148 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:36): avc: denied { sys_nice } for pid=1149 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray sr 5:0:0:0: Attached scsi CD-ROM sr1 audit(1186165154.770:37): avc: denied { sys_nice } for pid=1174 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:38): avc: denied { sys_nice } for pid=1185 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:39): avc: denied { sys_nice } for pid=1185 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability firewire_core: created new fw device fw0 (0 config rom retries, S400) firewire_core: created new fw device fw1 (0 config rom retries, S400) firewire_core: phy config: card 0, new root=ffc1, gap_count=5 audit(1186165154.770:40): avc: denied { sys_nice } for pid=1221 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:41): avc: denied { sys_nice } for pid=1221 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:42): avc: denied { sys_nice } for pid=1221 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165154.770:43): avc: denied { sys_nice } for pid=1252 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165154.770:44): avc: denied { sys_nice } for pid=1259 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165154.770:45): avc: denied { sys_nice } for pid=1259 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165154.770:46): avc: denied { sys_nice } for pid=1259 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165154.770:47): avc: denied { sys_nice } for pid=1259 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165154.770:48): avc: denied { sys_nice } for pid=1259 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set routing entry (2-17 -> 0x99 -> IRQ 17 Mode:1 Active:1) ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 ice1724: No matching model found for ID 0x581404a6 ice1724: Invalid EEPROM version 1 audit(1186165154.770:49): avc: denied { sys_nice } for pid=1221 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186165155.270:50): avc: denied { sys_nice } for pid=1302 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability loop: module loaded audit(1186165155.770:51): avc: denied { sys_nice } for pid=1324 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:52): avc: denied { sys_nice } for pid=1328 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:53): avc: denied { sys_nice } for pid=1333 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability lp: driver loaded but no devices found audit(1186165155.770:54): avc: denied { sys_nice } for pid=1328 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:55): avc: denied { sys_nice } for pid=1353 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:56): avc: denied { sys_nice } for pid=1357 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:57): avc: denied { sys_nice } for pid=1362 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability No dock devices found. audit(1186165155.770:58): avc: denied { sys_nice } for pid=1362 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:59): avc: denied { sys_nice } for pid=1362 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165155.770:60): avc: denied { sys_nice } for pid=1362 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:61): avc: denied { sys_nice } for pid=1375 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] audit(1186165156.270:62): avc: denied { sys_nice } for pid=1382 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:63): avc: denied { sys_nice } for pid=1395 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:64): avc: denied { sys_nice } for pid=1395 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:65): avc: denied { sys_nice } for pid=1395 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:66): avc: denied { sys_nice } for pid=1405 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165156.270:67): avc: denied { sys_nice } for pid=1405 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs audit(1186165157.270:68): avc: denied { sys_nice } for pid=1444 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NTFS driver 2.1.28 [Flags: R/W MODULE]. audit(1186165157.270:69): avc: denied { sys_nice } for pid=1449 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NTFS volume version 3.1. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts NTFS volume version 3.1. SELinux: initialized (dev sdb1, type ntfs), uses genfs_contexts audit(1186165157.770:70): avc: denied { sys_nice } for pid=1454 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165157.770:71): avc: denied { sys_nice } for pid=1454 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts audit(1186165161.269:72): avc: denied { sys_nice } for pid=1595 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186165162.769:73): avc: denied { sys_nice } for pid=1662 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NET: Registered protocol family 10 lo: Disabled Privacy Extensions audit(1186165171.768:74): audit_pid=2068 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) eth0: no IPv6 routers present SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts