Initializing container subsys cpuset Linux version 2.6.22-rc6-mm1 (rob@newcastle.ss.shawcable.net) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #2 SMP Thu Jun 28 18:35:46 CST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 apic=verbose BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000F7C80, 0014 (r0 Nvidia) ACPI: RSDT 7FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 7FFF3180, 69D6 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF9C80, 01CA (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG 7FFF9EC0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7FFF9BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fff0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524272) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fff0000 sizeof(struct page) = 56 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524272 On node 0 totalpages: 524175 DMA zone: 56 pages used for memmap DMA zone: 1482 pages reserved DMA zone: 2461 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 513065 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fb000 ( fee00000) mapped IOAPIC to ffffffffff5fa000 (00000000fec00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41928 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515526 Policy zone: DMA32 Kernel command line: ro root=/dev/VolGroup00/LogVol00 apic=verbose Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.330 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ 620000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2058044k/2097088k available (2405k kernel code, 38656k reserved, 2067k data, 340k init) Calibrating delay using timer specific routine.. 4423.99 BogoMIPS (lpj=2211995) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x32 -> IRQ 2 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. Using local APIC timer interrupts. ... lapic delta = 1256247 ... PM timer delta = 357900 ... PM timer result ok ..... delta 1256247 ..... mult: 53963600 ..... calibration result: 200999 ..... CPU clock speed is 2210.0994 MHz. ..... host bus clock speed is 200.0999 MHz. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4421.89 BogoMIPS (lpj=2210946) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 1 0 0 0 0 0 0 30 01 003 0 0 0 0 0 1 1 31 02 003 1 0 0 0 0 1 1 32 03 003 1 0 0 0 0 1 1 33 04 003 1 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 1 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 1 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x4000-0x407f has been reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff has been reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: 00:01: iomem range 0x0-0x0 could not be reserved pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: d4000000-d40fffff Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 9000-9fff MEM window: d0000000-d3ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3769k freed audit: initializing netlink socket (disabled) audit(1186143314.411:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] cpuidle: driver acpi_idle failed to attach to cpu 1 cpuidle: driver acpi_idle failed to attach to cpu 0 ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 340k freed Write protecting the kernel read-only data: 1708k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 IOAPIC[0]: Set routing entry (2-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xd4103000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22-rc6-mm1 ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 IOAPIC[0]: Set routing entry (2-22 -> 0x71 -> IRQ 22 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22-rc6-mm1 ehci_hcd usb usb2: SerialNumber: 0000:00:02.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 IOAPIC[0]: Set routing entry (2-21 -> 0x79 -> IRQ 21 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xffffc2000032c480 ctl 0xffffc2000032c4a0 bmdma 0x000000000001d800 irq 0 ata2: SATA max UDMA/133 cmd 0xffffc2000032c580 ctl 0xffffc2000032c5a0 bmdma 0x000000000001d808 irq 0 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 IOAPIC[0]: Set routing entry (2-20 -> 0x81 -> IRQ 20 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xffffc2000032e480 ctl 0xffffc2000032e4a0 bmdma 0x000000000001c400 irq 0 ata4: SATA max UDMA/133 cmd 0xffffc2000032e580 ctl 0xffffc2000032e5a0 bmdma 0x000000000001c408 irq 0 usb 2-2: new high speed USB device using ehci_hcd and address 3 usb 2-2: new device found, idVendor=0409, idProduct=0059 usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133 ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 usb 2-9: new high speed USB device using ehci_hcd and address 6 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-6: ST3160827AS, 3.42, max UDMA/133 ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 2:0:0:0: [sda] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5 ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 <<6>usb 2-9: new device found, idVendor=07cc, idProduct=0301 usb 2-9: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-9: Product: Winter Ver1.3 usb 2-9: Manufacturer: Ltd usb 2-9: SerialNumber: 972394281841 usb 2-9: configuration #1 chosen from 1 choice libusual: modprobe for usb-storage succeeded, but module is not present sdb5 > sd 3:0:0:0: [sdb] Attached SCSI disk usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: new device found, idVendor=045e, idProduct=008c usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Microsoft Wireless Optical Mouse® 1.0A usb 1-1: Manufacturer: Microsoft usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input0 input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-1 usb 1-3: new full speed USB device using ohci_hcd and address 3 usb 1-3: new device found, idVendor=0451, idProduct=1446 usb 1-3: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected usb 1-4: new low speed USB device using ohci_hcd and address 4 usb 1-4: new device found, idVendor=051d, idProduct=0002 usb 1-4: new device strings: Mfr=3, Product=1, SerialNumber=2 usb 1-4: Product: Back-UPS BR 800 FW:9.o2 .D USB FW:o2 usb 1-4: Manufacturer: American Power Conversion usb 1-4: SerialNumber: QB0419230426 usb 1-4: configuration #1 chosen from 1 choice hiddev96hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o2 .D USB FW:o2 ] on usb-0000:00:02.0-4 usb 2-2.1: new full speed USB device using ehci_hcd and address 7 usb 2-2.1: new device found, idVendor=046d, idProduct=092c usb 2-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2.1: Product: Camera usb 2-2.1: Manufacturer: usb 2-2.1: configuration #1 chosen from 1 choice usb 1-3.1: new low speed USB device using ohci_hcd and address 5 usb 1-3.1: new device found, idVendor=045e, idProduct=002b usb 1-3.1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3.1: Product: Microsoft Internet Keyboard Pro usb 1-3.1: configuration #1 chosen from 1 choice input: Microsoft Internet Keyboard Pro as /class/input/input1 input,hidraw2: USB HID v1.10 Keyboard [Microsoft Internet Keyboard Pro] on usb-0000:00:02.0-3.1 input: Microsoft Internet Keyboard Pro as /class/input/input2 input,hidraw3: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on usb-0000:00:02.0-3.1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: netlink: version 1.0.0 loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1186143320.411:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1829 types, 81 bools, 1 sens, 1024 cats security: 61 classes, 68575 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev revokefs, type revokefs), not configured for labeling SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1186143320.411:3): policy loaded auid=4294967295 audit(1186164925.218:4): avc: denied { sys_nice } for pid=638 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 audit(1186164925.718:5): avc: denied { sys_nice } for pid=596 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164925.718:6): avc: denied { sys_nice } for pid=874 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164925.718:7): avc: denied { sys_nice } for pid=653 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 audit(1186164925.718:8): avc: denied { sys_nice } for pid=874 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 audit(1186164925.718:9): avc: denied { sys_nice } for pid=895 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14 ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15 audit(1186164925.718:10): avc: denied { sys_nice } for pid=972 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164925.718:11): avc: denied { sys_nice } for pid=905 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. audit(1186164926.218:12): avc: denied { sys_nice } for pid=929 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.218:13): avc: denied { sys_nice } for pid=908 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.218:14): avc: denied { sys_nice } for pid=929 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.218:15): avc: denied { sys_nice } for pid=972 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.218:16): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata5.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS0E, max UDMA/66 ata5.00: limited to UDMA/33 due to 40-wire cable audit(1186164926.218:17): avc: denied { sys_nice } for pid=972 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata5.00: configured for UDMA/33 audit(1186164926.218:18): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.718:19): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164926.718:20): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata6.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S09, max UDMA/33 audit(1186164926.718:21): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ata6.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS0E PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg2 type 5 scsi 5:0:0:0: CD-ROM LITE-ON CD-RW SOHR-5238S 4S09 PQ: 0 ANSI: 5 scsi 5:0:0:0: Attached scsi generic sg3 type 5 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA nvidia: module license 'NVIDIA' taints kernel. audit(1186164927.218:22): avc: denied { sys_nice } for pid=1092 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:23): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:24): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:25): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:26): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:27): avc: denied { sys_nice } for pid=969 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 audit(1186164927.218:28): avc: denied { sys_nice } for pid=905 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set routing entry (2-16 -> 0x89 -> IRQ 16 Mode:1 Active:1) ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 audit(1186164927.218:29): avc: denied { sys_nice } for pid=929 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:30): avc: denied { sys_nice } for pid=1142 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 audit(1186164927.218:31): avc: denied { sys_nice } for pid=908 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set routing entry (2-18 -> 0x91 -> IRQ 18 Mode:1 Active:1) ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007 audit(1186164927.218:32): avc: denied { sys_nice } for pid=895 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:33): avc: denied { sys_nice } for pid=972 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:34): avc: denied { sys_nice } for pid=1092 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.218:35): avc: denied { sys_nice } for pid=1150 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:36): avc: denied { sys_nice } for pid=1150 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:37): avc: denied { sys_nice } for pid=1169 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:38): avc: denied { sys_nice } for pid=1168 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray sr 5:0:0:0: Attached scsi CD-ROM sr1 audit(1186164927.718:39): avc: denied { sys_nice } for pid=1184 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:40): avc: denied { sys_nice } for pid=1184 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:41): avc: denied { sys_nice } for pid=1184 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164927.718:42): avc: denied { sys_nice } for pid=1203 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164927.718:43): avc: denied { sys_nice } for pid=1229 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164927.718:44): avc: denied { sys_nice } for pid=1229 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164927.718:45): avc: denied { sys_nice } for pid=1229 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164927.718:46): avc: denied { sys_nice } for pid=1229 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability firewire_core: created new fw device fw0 (0 config rom retries, S400) audit(1186164927.718:47): avc: denied { sys_nice } for pid=1229 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set routing entry (2-17 -> 0x99 -> IRQ 17 Mode:1 Active:1) ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 ice1724: No matching model found for ID 0x581404a6 ice1724: Invalid EEPROM version 1 firewire_core: created new fw device fw1 (0 config rom retries, S400) firewire_core: phy config: card 0, new root=ffc1, gap_count=5 audit(1186164928.218:48): avc: denied { sys_nice } for pid=1184 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=capability audit(1186164928.218:49): avc: denied { sys_nice } for pid=1300 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability loop: module loaded audit(1186164928.717:50): avc: denied { sys_nice } for pid=1322 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164928.717:51): avc: denied { sys_nice } for pid=1326 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164928.717:52): avc: denied { sys_nice } for pid=1331 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability lp: driver loaded but no devices found audit(1186164928.717:53): avc: denied { sys_nice } for pid=1326 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164928.717:54): avc: denied { sys_nice } for pid=1352 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:55): avc: denied { sys_nice } for pid=1356 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:56): avc: denied { sys_nice } for pid=1361 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability No dock devices found. audit(1186164929.217:57): avc: denied { sys_nice } for pid=1361 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:58): avc: denied { sys_nice } for pid=1361 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:59): avc: denied { sys_nice } for pid=1361 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:60): avc: denied { sys_nice } for pid=1374 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] audit(1186164929.217:61): avc: denied { sys_nice } for pid=1381 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:62): avc: denied { sys_nice } for pid=1394 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:63): avc: denied { sys_nice } for pid=1394 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:64): avc: denied { sys_nice } for pid=1394 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:65): avc: denied { sys_nice } for pid=1404 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164929.217:66): avc: denied { sys_nice } for pid=1404 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs audit(1186164930.717:67): avc: denied { sys_nice } for pid=1443 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NTFS driver 2.1.28 [Flags: R/W MODULE]. audit(1186164930.717:68): avc: denied { sys_nice } for pid=1448 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NTFS volume version 3.1. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts NTFS volume version 3.1. SELinux: initialized (dev sdb1, type ntfs), uses genfs_contexts audit(1186164930.717:69): avc: denied { sys_nice } for pid=1453 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164930.717:70): avc: denied { sys_nice } for pid=1453 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability SELinux: initialized (dev sdb2, type vfat), uses genfs_contexts Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts audit(1186164934.217:71): avc: denied { sys_nice } for pid=1594 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability audit(1186164935.716:72): avc: denied { sys_nice } for pid=1661 comm="modprobe" capability=23 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:system_r:insmod_t:s0 tclass=capability NET: Registered protocol family 10 lo: Disabled Privacy Extensions audit(1186164944.715:73): audit_pid=2067 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 eth0: no IPv6 routers present it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts