| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1186179369.13852.36.camel@localhost>
Date: Fri, 03 Aug 2007 15:16:09 -0700
From: Joe Perches <joe@...ches.com>
To: Jean Delvare <khali@...ux-fr.org>, linux-kernel@...r.kernel.org
Cc: akpm@...ux-foundation.org, mm-commits@...r.kernel.org,
adaplas@....net, greg@...ah.com, jeff@...zik.org
Subject: Re: + remove-current-defines-and-uses-of-pr_err-add-pr_emerg.patch
added to -mm tree
On Fri, 2007-08-03 at 17:05 +0200, Jean Delvare wrote:
> Fine with me, but this first patch should still be correct per se.
Add new pr_<level> printk(KERN_<level> fmt "\n", ##arg) to kernel.h
pr_info and pr_debug are unchanged
Remove local pr_err #defines
Convert current uses of pr_err
Signed-off-by: Joe Perches <joe@...ches.com>
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 4300bb4..6447072 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -229,20 +229,24 @@ extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
void *buf, size_t len);
#define hex_asc(x) "0123456789abcdef"[x]
+#define pr_emerg(fmt, arg...) printk(KERN_EMERG fmt "\n", ##arg)
+#define pr_alert(fmt, arg...) printk(KERN_ALERT fmt "\n", ##arg)
+#define pr_crit(fmt, arg...) printk(KERN_CRIT fmt "\n", ##arg)
+#define pr_err(fmt, arg...) printk(KERN_ERR fmt "\n", ##arg)
+#define pr_warn(fmt, arg...) printk(KERN_WARNING fmt "\n", ##arg)
+#define pr_notice(fmt, arg...) printk(KERN_NOTICE fmt "\n", ##arg)
+#define pr_info(fmt, arg...) printk(KERN_INFO fmt, ##arg)
+
#ifdef DEBUG
/* If you are writing a driver, please use dev_dbg instead */
-#define pr_debug(fmt,arg...) \
- printk(KERN_DEBUG fmt,##arg)
+#define pr_debug(fmt, arg...) printk(KERN_DEBUG fmt, ##arg)
#else
-static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...)
+static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *fmt, ...)
{
return 0;
}
#endif
-#define pr_info(fmt,arg...) \
- printk(KERN_INFO fmt,##arg)
-
/*
* Display an IP address in readable format.
*/
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index 48a7e2f..055a7b4 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,8 +49,7 @@
#include <asm/arch/menelaus.h>
#define DRIVER_NAME "menelaus"
-
-#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
+#define PFX DRIVER_NAME ": "
#define MENELAUS_I2C_ADDRESS 0x72
@@ -156,7 +155,7 @@ static int menelaus_write_reg(int reg, u8 value)
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
if (val < 0) {
- pr_err("write error");
+ pr_err(PFX "write error");
return val;
}
@@ -168,7 +167,7 @@ static int menelaus_read_reg(int reg)
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
if (val < 0)
- pr_err("read error");
+ pr_err(PFX "read error");
return val;
}
@@ -1178,7 +1177,7 @@ static int menelaus_probe(struct i2c_client *client)
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
- pr_err("device not found");
+ pr_err(PFX "device not found");
err = -ENODEV;
goto fail1;
}
@@ -1259,7 +1258,7 @@ static int __init menelaus_init(void)
res = i2c_add_driver(&menelaus_i2c_driver);
if (res < 0) {
- pr_err("driver registration failed\n");
+ pr_err(PFX "driver registration failed");
return res;
}
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 590b12c..ce0417c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1238,14 +1238,14 @@ spider_net_decode_one_descr(struct spider_net_card *card)
if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
hwdescr->dmac_cmd_status);
- pr_err("buf_addr=x%08x\n", hw_buf_addr);
- pr_err("buf_size=x%08x\n", hwdescr->buf_size);
- pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
- pr_err("result_size=x%08x\n", hwdescr->result_size);
- pr_err("valid_size=x%08x\n", hwdescr->valid_size);
- pr_err("data_status=x%08x\n", hwdescr->data_status);
- pr_err("data_error=x%08x\n", hwdescr->data_error);
- pr_err("which=%ld\n", descr - card->rx_chain.ring);
+ pr_err("buf_addr=x%08x", hw_buf_addr);
+ pr_err("buf_size=x%08x", hwdescr->buf_size);
+ pr_err("next_descr_addr=x%08x", hwdescr->next_descr_addr);
+ pr_err("result_size=x%08x", hwdescr->result_size);
+ pr_err("valid_size=x%08x", hwdescr->valid_size);
+ pr_err("data_status=x%08x", hwdescr->data_status);
+ pr_err("data_error=x%08x", hwdescr->data_error);
+ pr_err("which=%ld", descr - card->rx_chain.ring);
card->spider_stats.rx_desc_error++;
goto bad_desc;
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index dbbdb8c..c67b11d 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -493,7 +493,4 @@ struct spider_net_card {
struct spider_net_descr darray[0];
};
-#define pr_err(fmt,arg...) \
- printk(KERN_ERR fmt ,##arg)
-
#endif
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 51807b4..c37b651 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -27,8 +27,7 @@
#include <asm/arch/omapfb.h>
#define MODULE_NAME "omapfb-lcd_h3"
-
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
+#define PFX MODULE_NAME ": "
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
@@ -48,7 +47,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
- pr_err("Unable to turn on LCD panel\n");
+ pr_err(PFX "Unable to turn on LCD panel");
return r;
}
@@ -62,7 +61,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
- pr_err("Unable to turn off LCD panel\n");
+ pr_err(PFX "Unable to turn off LCD panel");
}
static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 95604ca..562a30e 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -26,8 +26,7 @@
#include <asm/arch/omapfb.h>
#define MODULE_NAME "omapfb-lcd_h3"
-
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
+#define PFX MODULE_NAME ": "
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
@@ -35,12 +34,12 @@ static int innovator1610_panel_init(struct lcd_panel *panel,
int r = 0;
if (omap_request_gpio(14)) {
- pr_err("can't request GPIO 14\n");
+ pr_err(PFX "can't request GPIO 14");
r = -1;
goto exit;
}
if (omap_request_gpio(15)) {
- pr_err("can't request GPIO 15\n");
+ pr_err(PFX "can't request GPIO 15");
omap_free_gpio(14);
r = -1;
goto exit;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists