lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20070805155915.GM2761@avontuur.org>
Date:	Sun, 5 Aug 2007 17:59:16 +0200
From:	Bram <bram@...ux.kernel.as.avontuur.org>
To:	linux-kernel@...r.kernel.org
Subject: Possible bug in realtek 8169 ethernet driver

Hello,

On my system running linux kernel 2.6.21.5, I can't get my ethernet card
to work. When loading the r8169 module, it will claim to be detected as
eth0, but it will show up as eth2 in ifconfig. There are no eth0 or eth1
devices though. It doesn't work as eth2 either. 

The router attached to it indicates a 100mbit link. But that's about it.
I cannot get any data over it. I can manually configure it to have an IP
address and netmask, but it won't see anything on the local net. DHCP
doesn't work either. Nothing out of the ordinary is logged in dmesg or
anywhere else. An usb ethernet dongle on the system works just fine,
ruling out (absent anyway) firewall or similar trouble.  The device works
well in windows XP.

Relevant system specs:
-Gigabyte GA-G33m-DS2R motherboard, with the integrated realtec nic
-intel c2d CPU

I've included output of several programs below, hope this helps.

Please CC: to my email address, as I have not subscribed myself to the kernel list.

dmesg output:

r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: RTL8168b/8111b at 0xf8854000, 00:1a:4d:44:a1:1f, IRQ 18
...
r8169: eth2: link up
r8169: eth2: link up

ifconfig output:

eth2      Link encap:Ethernet  HWaddr 00:1A:4D:44:A1:1F  
          inet addr:192.168.3.10  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: 2001:610:1108:5203::2/64 Scope:Global
          inet6 addr: 2001:610:1108:5203:21a:4dff:fe44:a11f/64 Scope:Global
          inet6 addr: fe80::21a:4dff:fe44:a11f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:296529 errors:0 dropped:0 overruns:0 frame:0
          TX packets:221678 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:438053177 (417.7 MiB)  TX bytes:14156999 (13.5 MiB)
          Interrupt:18 Base address:0x4000 

lspci output:

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
        Subsystem: Giga-byte Technology Unknown device e000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at c000 [size=256]
        Region 2: Memory at ec000000 (64-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at ed200000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [60] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s unlimited, L1 unlimited
                Device: AtnBtn+ AtnInd+ PwrInd+
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
                Link: Latency L0s unlimited, L1 unlimited
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [84] Vendor Specific Information
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [12c] Virtual Channel
        Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-25
        Capabilities: [154] Power Budgeting


Best regards,
Bram
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ