| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.62.0708102357470.24424@mail.bglans.net>
Date: Sat, 11 Aug 2007 00:31:30 +0300 (EEST)
From: ivaylo@...ans.net
To: linux-kernel@...r.kernel.org
cc: w@....eu
Subject: 2.4.XX ICH7 PATA UDMA Support
Hello,
I have ASUS P5LD2-VM mobo with Intel ICH7 PATA IDE. It works only
in PIO mode, so I changed piix driver in 2.4.35 to support UDMA modes -
patch is bellow.
I'm a little bit confused about the specifications of ICH7 PATA, from ASUS
say it is UDMA 100, but from Intel and in 2.6.XX kernel tree it is as UDMA
133. My confusion became stronger and from bios ide SATA/PATA options of
my mobo.
Anyway, the patch works for me and it should work for all mobos with 945
chipset, but need to be tested. If there are any volunteers to apply patch
and test it will be good.
Please report the results and play around with mobo bios SATA/PATA IDE
setings.
Best Regards,
Ivaylo Josifov
diff -ru a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
--- a/drivers/ide/pci/piix.c 2007-07-26 23:53:41.000000000 +0300
+++ b/drivers/ide/pci/piix.c 2007-08-10 20:08:13.000000000 +0300
@@ -155,6 +155,7 @@
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_2:
+ case PCI_DEVICE_ID_INTEL_ICH7_21:
p += sprintf(p, "PIIX4 Ultra 100 ");
break;
case PCI_DEVICE_ID_INTEL_82372FB_1:
@@ -294,6 +295,7 @@
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_2:
+ case PCI_DEVICE_ID_INTEL_ICH7_21:
mode = 3;
break;
/* UDMA 66 capable */
@@ -683,6 +685,7 @@
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_2:
+ case PCI_DEVICE_ID_INTEL_ICH7_21:
{
unsigned int extra = 0;
pci_read_config_dword(dev, 0x54, &extra);
@@ -882,6 +885,7 @@
#endif
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20},
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
{ 0, },
};
diff -ru a/drivers/ide/pci/piix.h b/drivers/ide/pci/piix.h
--- a/drivers/ide/pci/piix.h 2007-07-26 23:53:41.000000000 +0300
+++ b/drivers/ide/pci/piix.h 2007-08-10 20:21:02.000000000 +0300
@@ -333,6 +333,20 @@
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
.bootable = ON_BOARD,
.extra = 0,
+ },{ /* 21 */
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_ICH7_21,
+ .name = "ICH7",
+ .init_setup = init_setup_piix,
+ .init_chipset = init_chipset_piix,
+ .init_iops = NULL,
+ .init_hwif = init_hwif_piix,
+ .init_dma = init_dma_piix,
+ .channels = 1,
+ .autodma = AUTODMA,
+ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
+ .bootable = ON_BOARD,
+ .extra = 0,
},{
.vendor = 0,
.device = 0,
diff -ru a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h 2007-07-26 23:53:41.000000000 +0300
+++ b/include/linux/pci_ids.h 2007-08-10 20:11:13.000000000 +0300
@@ -1978,6 +1978,7 @@
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x266f
#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
+#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530
#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560
#define PCI_DEVICE_ID_INTEL_SMCH 0x3590
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists