linux-kernel - Re: Linux 2.6.23-rc3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1187007793.5717.11.camel@zv.wilibox.com>
Date:	Mon, 13 Aug 2007 15:23:13 +0300
From:	Zilvinas Valinskas <zilvinas@...ibox.com>
To:	Linus Torvalds <torvalds@...ux-foundation.org>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: Linux 2.6.23-rc3

Hello lkml, 

Linux kernel v2.6.23-rc3 booted ok and so far everything is fine. I have
HP Compaq nx9420 laptop (Dual Core). 

Just a few things that I found interesting:

1. /sys/devices/system/clocksource/clocksource0/*

$ sudo grep . *
available_clocksource:hpet hpet acpi_pm jiffies tsc
                      ^^^^^^^^^ listed twice ;) not a big deal but still. 
current_clocksource:hpet
                    ^^^^ seems selected ;) although in dmesg there are

$ dmesg | grep -i hpet
$ dmesg | grep -i hpet
ACPI: HPET 7FFE59BC, 0038 (r1 HP     309F            1 HP          1)
ACPI: HPET id: 0x8086a201 base: 0xfed00000
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
hpet_resources: 0xfed00000 is busy
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ? strange.

Time: hpet clocksource has been installed.

2. ACPI related (?) - one fan is always on, even when system is idling.

It never stops ;)

$ acpi -bt
     Battery 1: charged, 98%
     Thermal 1: ok, 48.0 degrees C
     Thermal 2: ok, 38.0 degrees C
     Thermal 3: active[5], 47.0 degrees C
     Thermal 4: ok, 37.0 degrees C
     Thermal 5: ok, 32.0 degrees C
     Thermal 6: ok, 25.0 degrees C

In earlier kernel versions it was turned on when needed (mostly during
compilation ...) and then when system is cooled  enough fan was
automatically turned off.

3. the same messages are printed twice (2.6.23-rc2 was fine).

Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
^^^^^^^^^^^^^^^^^^^^^^^^ 1st time
ACPI: Interpreter enabled
ACPI: (supports S0 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
^^^^^^^^^^^^^^^^^^^^^^^^ 2nd time
ACPI: PCI Root Bridge [C003] (0000:00)

Otherwise I am happy with 2.6.23-rc3. Thank y'all ;)

Best regards,
Zilvinas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/