| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46C1DB4C.8020001@suse.de> Date: Tue, 14 Aug 2007 20:41:48 +0400 From: Alexey Starikovskiy <astarikovskiy@...e.de> To: Norbert Preining <preining@...ic.at> CC: Len Brown <lenb@...nel.org>, Sergey Dolgov <solkaa@...il.com>, Hugh Dickins <hugh@...itas.com>, Len Brown <len.brown@...el.com>, Linus Torvalds <torvalds@...ux-foundation.org>, Henrique de Moraes Holshuh <hmh@....eng.br>, Michal Piotrowski <michal.k.k.piotrowski@...il.com>, linux-kernel@...r.kernel.org Subject: Re: [Fwd: Re: 2.6.23-rc3 regression and bisection query] According to DSDT, it is expected behavior. _STA for BAT1 will return 0f (absent) until first _Q09 query from EC. So, we should get BAT1 absent at init time, and some time later it will appear (if queries are going through). Regards, Alex. Norbert Preining wrote: > Hi Len, > > On Die, 14 Aug 2007, Len Brown wrote: > >>> But there is still the strange thing that >>> ACPI: Battery Slot [BAT1] (battery absent) >>> is present in the dmesg, while >>> $ acpi >>> Battery 1: charging, 46%, 00:00:49 until charged >>> >> Does the system support more than 1 battery? >> > > At least not physically ... > > >> Can you show the full dmesg and the full contents of /proc/acpi/battery/*/*? >> > > dmesg I sent already, but attached here from > 2.6.23-rc3 + acpi-ec-fix-regression > > $ ls /proc/acpi/battery/ > BAT1 > $ ls /proc/acpi/battery/BAT1 > alarm info state > $ cat /proc/acpi/battery/BAT1/alarm > alarm: unsupported > $ cat /proc/acpi/battery/BAT1/info > present: yes > design capacity: 2000 mAh > last full capacity: 1649 mAh > battery technology: rechargeable > design voltage: 11100 mV > design capacity warning: 300 mAh > design capacity low: 65 mAh > capacity granularity 1: 32 mAh > capacity granularity 2: 32 mAh > model number: ZH01 > serial number: 40110 > battery type: LION > OEM info: SANYO > $ cat /proc/acpi/battery/BAT1/state > present: yes > capacity state: ok > charging state: charged > present rate: 0 mA > remaining capacity: 1649 mAh > present voltage: 12538 mV > > Best wishes > > Norbert > > ------------------------------------------------------------------------------- > Dr. Norbert Preining <preining@...ic.at> Vienna University of Technology > Debian Developer <preining@...ian.org> Debian TeX Group > gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094 > ------------------------------------------------------------------------------- > DULEEK (n.) > Sudden realisation, as you lie in bed waiting for the alarm to go off, > that it should have gone off an hour ago. > --- Douglas Adams, The Meaning of Liff > > ------------------------------------------------------------------------ > > Linux version 2.6.23-rc3 (root@...hrandir) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #7 SMP PREEMPT Tue Aug 14 08:59:17 CEST 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003f680000 (usable) > BIOS-e820: 000000003f680000 - 000000003f696000 (ACPI data) > BIOS-e820: 000000003f696000 - 000000003f700000 (ACPI NVS) > BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > 118MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000f69f0 > Entering add_active_range(0, 0, 259712) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 259712 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 259712 > On node 0 totalpages: 259712 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 237 pages used for memmap > HighMem zone: 30099 pages, LIFO batch:7 > Movable zone: 0 pages used for memmap > DMI present. > ACPI: RSDP 000F6920, 0014 (r0 PTLTD ) > ACPI: RSDT 3F68CF85, 0040 (r1 PTLTD RSDT 6040000 LTP 0) > ACPI: FACP 3F695E20, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A) > ACPI: DSDT 3F68D941, 84DF (r1 INTEL CALISTGA 6040000 MSFT 2000002) > ACPI: FACS 3F696FC0, 0040 > ACPI: APIC 3F695E94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) > ACPI: HPET 3F695EFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) > ACPI: MCFG 3F695F34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) > ACPI: APIC 3F695F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) > ACPI: BOOT 3F695FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) > ACPI: SSDT 3F68CFC5, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624) > ACPI: BIOS bug: multiple APIC/MADT found, using 0 > ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@...r.kernel.org > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 6:14 APIC version 20 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 6:14 APIC version 20 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) > swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 > swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 > swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 > Built 1 zonelists in Zone order. Total pages: 257683 > Kernel command line: root=/dev/sda6 ro resume=/dev/sda5 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1666.906 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1022248k/1038848k available (2325k kernel code, 15888k reserved, 1028k data, 200k init, 121344k highmem) > virtual kernel memory layout: > fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc044e000 - 0xc0480000 ( 200 kB) > .data : 0xc0345426 - 0xc04464a4 (1028 kB) > .text : 0xc0100000 - 0xc0345426 (2325 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > hpet0: 3 64-bit timers, 14318180 Hz > Calibrating delay using timer specific routine.. 3337.27 BogoMIPS (lpj=6674558) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20070126 > ACPI: Table DSDT replaced by host OS > ACPI: DSDT 00000000, 79B8 (r1 INTEL CALISTGA 6040000 INTL 20060912) > ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3333.62 BogoMIPS (lpj=6667256) > CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000 > monitor/mwait feature present. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 > Total of 2 processors activated (6670.90 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > PM: Adding info for No Bus:platform > NET: Registered protocol family 16 > PM: Adding info for No Bus:vtcon0 > ACPI: bus type pci registered > PM: Adding info for No Bus:id > PCI: Using MMCONFIG > Setting up standard PCI resources > ACPI: EC: Look up EC in DSDT > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > ACPI: System BIOS is requesting _OSI(Linux) > ACPI: If "acpi_osi=Linux" works better, > Please send dmidecode to linux-acpi@...r.kernel.org > ACPI: Interpreter enabled > ACPI: (supports S0 S3) > ACPI: Using IOAPIC for interrupt routing > PM: Adding info for acpi:LNXSYSTM:00 > PM: Adding info for acpi:LNXPWRBN:00 > PM: Adding info for acpi:ACPI0007:00 > PM: Adding info for acpi:ACPI0007:01 > PM: Adding info for acpi:device:00 > PM: Adding info for acpi:PNP0A08:00 > PM: Adding info for acpi:PNP0C02:00 > PM: Adding info for acpi:LNXVIDEO:00 > PM: Adding info for acpi:device:01 > PM: Adding info for acpi:device:02 > PM: Adding info for acpi:device:03 > PM: Adding info for acpi:device:04 > PM: Adding info for acpi:device:05 > PM: Adding info for acpi:device:06 > PM: Adding info for acpi:device:07 > PM: Adding info for acpi:device:08 > PM: Adding info for acpi:device:09 > PM: Adding info for acpi:device:0a > PM: Adding info for acpi:device:0b > PM: Adding info for acpi:device:0c > PM: Adding info for acpi:device:0d > PM: Adding info for acpi:device:0e > PM: Adding info for acpi:device:0f > PM: Adding info for acpi:device:10 > PM: Adding info for acpi:device:11 > PM: Adding info for acpi:device:12 > PM: Adding info for acpi:device:13 > PM: Adding info for acpi:device:14 > PM: Adding info for acpi:device:15 > PM: Adding info for acpi:device:16 > PM: Adding info for acpi:device:17 > PM: Adding info for acpi:device:18 > PM: Adding info for acpi:device:19 > PM: Adding info for acpi:device:1a > PM: Adding info for acpi:device:1b > PM: Adding info for acpi:PNP0C0F:00 > PM: Adding info for acpi:PNP0C0F:01 > PM: Adding info for acpi:PNP0C0F:02 > PM: Adding info for acpi:PNP0C0F:03 > PM: Adding info for acpi:PNP0C0F:04 > PM: Adding info for acpi:PNP0C0F:05 > PM: Adding info for acpi:PNP0C0F:06 > PM: Adding info for acpi:PNP0C0F:07 > PM: Adding info for acpi:PNP0C09:00 > PM: Adding info for acpi:PNP0200:00 > PM: Adding info for acpi:PNP0103:00 > PM: Adding info for acpi:PNP0000:00 > PM: Adding info for acpi:PNP0C04:00 > PM: Adding info for acpi:PNP0C02:01 > PM: Adding info for acpi:PNP0B00:00 > PM: Adding info for acpi:PNP0100:00 > PM: Adding info for acpi:PNP0A05:00 > PM: Adding info for acpi:NSC6001:00 > PM: Adding info for acpi:PNP0501:00 > PM: Adding info for acpi:PNP0401:00 > PM: Adding info for acpi:PNP0303:00 > PM: Adding info for acpi:SYN1003:00 > PM: Adding info for acpi:device:1c > PM: Adding info for acpi:device:1d > PM: Adding info for acpi:device:1e > PM: Adding info for acpi:device:1f > PM: Adding info for acpi:device:20 > PM: Adding info for acpi:device:21 > PM: Adding info for acpi:device:22 > PM: Adding info for acpi:device:23 > PM: Adding info for acpi:ACPI0003:00 > PM: Adding info for acpi:PNP0C0A:00 > PM: Adding info for acpi:PNP0C0D:00 > PM: Adding info for acpi:PNP0C0C:00 > PM: Adding info for acpi:PNP0C0E:00 > PM: Adding info for acpi:PNP0C14:00 > PM: Adding info for acpi:LNXTHERM:00 > PM: Adding info for acpi:LNXTHERM:01 > ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > ACPI: PCI Root Bridge [PCI0] (0000:00) > PM: Adding info for No Bus:pci0000:00 > PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 1180-11bf claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') > Please report the result to <bk@...e.de> to fix this permanently > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > PM: Adding info for pci:0000:00:00.0 > PM: Adding info for pci:0000:00:02.0 > PM: Adding info for pci:0000:00:02.1 > PM: Adding info for pci:0000:00:1b.0 > PM: Adding info for pci:0000:00:1c.0 > PM: Adding info for pci:0000:00:1c.1 > PM: Adding info for pci:0000:00:1c.2 > PM: Adding info for pci:0000:00:1c.3 > PM: Adding info for pci:0000:00:1d.0 > PM: Adding info for pci:0000:00:1d.1 > PM: Adding info for pci:0000:00:1d.2 > PM: Adding info for pci:0000:00:1d.3 > PM: Adding info for pci:0000:00:1d.7 > PM: Adding info for pci:0000:00:1e.0 > PM: Adding info for pci:0000:00:1f.0 > PM: Adding info for pci:0000:00:1f.2 > PM: Adding info for pci:0000:00:1f.3 > PM: Adding info for pci:0000:02:00.0 > PM: Adding info for pci:0000:03:00.0 > PM: Adding info for pci:0000:0a:09.0 > PM: Adding info for pci:0000:0a:09.1 > PM: Adding info for pci:0000:0a:09.2 > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > PM: Adding info for No Bus:pnp0 > ACPI: bus type pnp registered > PM: Adding info for pnp:00:00 > PM: Adding info for pnp:00:01 > PM: Adding info for pnp:00:02 > PM: Adding info for pnp:00:03 > PM: Adding info for pnp:00:04 > PM: Adding info for pnp:00:05 > PM: Adding info for pnp:00:06 > PM: Adding info for pnp:00:07 > PM: Adding info for pnp:00:08 > PM: Adding info for pnp:00:09 > PM: Adding info for pnp:00:0a > PM: Adding info for pnp:00:0b > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 2.21 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 > PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 > PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 > PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 > PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 > PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 > PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 > PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3 > Bluetooth: Core ver 2.11 > PM: Adding info for platform:bluetooth > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > ACPI: RTC can wake from S4 > Time: tsc clocksource has been installed. > Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 1 > pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved > pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved > pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved > pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved > pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved > PM: Adding info for No Bus:mem > PM: Adding info for No Bus:kmem > PM: Adding info for No Bus:null > PM: Adding info for No Bus:port > PM: Adding info for No Bus:zero > PM: Adding info for No Bus:full > PM: Adding info for No Bus:random > PM: Adding info for No Bus:urandom > PM: Adding info for No Bus:kmsg > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: 54000000-540fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: 54100000-541fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.2 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.3 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bus 11, cardbus bridge: 0000:0a:09.0 > IO window: 00002000-000020ff > IO window: 00002400-000024ff > PREFETCH window: 50000000-53ffffff > MEM window: 58000000-5bffffff > PCI: Bridge: 0000:00:1e.0 > IO window: 2000-2fff > MEM window: b0400000-b04fffff > PREFETCH window: 50000000-53ffffff > PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Enabling device 0000:00:1c.1 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 20 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 7, 786432 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 2979k freed > Simple Boot Flag at 0x3e set to 0x1 > Machine check exception polling timer started. > PM: Adding info for No Bus:msr0 > PM: Adding info for No Bus:msr1 > PM: Adding info for No Bus:cpu0 > PM: Adding info for No Bus:cpu1 > PM: Adding info for No Bus:microcode > PM: Adding info for platform:microcode > IA-32 Microcode Update Driver: v1.14a <tigran@...azian.fsnet.co.uk> > PM: Adding info for platform:pcspkr > PM: Adding info for No Bus:snapshot > highmem bounce pool size: 64 pages > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > Boot video device is 0000:00:02.0 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > PM: Adding info for pci_express:0000:00:1c.0:pcie00 > Allocate Port Service[0000:00:1c.0:pcie02] > PM: Adding info for pci_express:0000:00:1c.0:pcie02 > Allocate Port Service[0000:00:1c.0:pcie03] > PM: Adding info for pci_express:0000:00:1c.0:pcie03 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > PM: Adding info for pci_express:0000:00:1c.1:pcie00 > Allocate Port Service[0000:00:1c.1:pcie02] > PM: Adding info for pci_express:0000:00:1c.1:pcie02 > Allocate Port Service[0000:00:1c.1:pcie03] > PM: Adding info for pci_express:0000:00:1c.1:pcie03 > PCI: Setting latency timer of device 0000:00:1c.2 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.2:pcie00] > PM: Adding info for pci_express:0000:00:1c.2:pcie00 > Allocate Port Service[0000:00:1c.2:pcie02] > PM: Adding info for pci_express:0000:00:1c.2:pcie02 > Allocate Port Service[0000:00:1c.2:pcie03] > PM: Adding info for pci_express:0000:00:1c.2:pcie03 > PCI: Setting latency timer of device 0000:00:1c.3 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.3:pcie00] > PM: Adding info for pci_express:0000:00:1c.3:pcie00 > Allocate Port Service[0000:00:1c.3:pcie02] > PM: Adding info for pci_express:0000:00:1c.3:pcie02 > Allocate Port Service[0000:00:1c.3:pcie03] > PM: Adding info for pci_express:0000:00:1c.3:pcie03 > ACPI: AC Adapter [ACAD] (on-line) > ACPI: Battery Slot [BAT1] (battery absent) > PM: Adding info for No Bus:input0 > input: Power Button (FF) as /devices/virtual/input/input0 > ACPI: Power Button (FF) [PWRF] > PM: Adding info for No Bus:input1 > input: Lid Switch as /devices/virtual/input/input1 > ACPI: Lid Switch [LID] > PM: Adding info for No Bus:input2 > input: Power Button (CM) as /devices/virtual/input/input2 > ACPI: Power Button (CM) [PWRB] > PM: Adding info for No Bus:input3 > input: Sleep Button (CM) as /devices/virtual/input/input3 > ACPI: Sleep Button (CM) [SLPB] > ACPI: SSDT 3F68D710, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) > ACPI: SSDT 3F68D4BB, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050624) > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: SSDT 3F68D8B8, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624) > ACPI: SSDT 3F68D68B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) > ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU1] (supports 8 throttling states) > Marking TSC unstable due to: possible TSC halt in C2. > Time: hpet clocksource has been installed. > ACPI: Thermal Zone [THRM] (48 C) > PM: Adding info for No Bus:tty > PM: Adding info for No Bus:console > PM: Adding info for No Bus:ptmx > PM: Adding info for No Bus:tty0 > PM: Adding info for No Bus:vcs > PM: Adding info for No Bus:vcsa > PM: Adding info for No Bus:tty1 > PM: Adding info for No Bus:tty2 > PM: Adding info for No Bus:tty3 > PM: Adding info for No Bus:tty4 > PM: Adding info for No Bus:tty5 > PM: Adding info for No Bus:tty6 > PM: Adding info for No Bus:tty7 > PM: Adding info for No Bus:tty8 > PM: Adding info for No Bus:tty9 > PM: Adding info for No Bus:tty10 > PM: Adding info for No Bus:tty11 > PM: Adding info for No Bus:tty12 > PM: Adding info for No Bus:tty13 > PM: Adding info for No Bus:tty14 > PM: Adding info for No Bus:tty15 > PM: Adding info for No Bus:tty16 > PM: Adding info for No Bus:tty17 > PM: Adding info for No Bus:tty18 > PM: Adding info for No Bus:tty19 > PM: Adding info for No Bus:tty20 > PM: Adding info for No Bus:tty21 > PM: Adding info for No Bus:tty22 > PM: Adding info for No Bus:tty23 > PM: Adding info for No Bus:tty24 > PM: Adding info for No Bus:tty25 > PM: Adding info for No Bus:tty26 > PM: Adding info for No Bus:tty27 > PM: Adding info for No Bus:tty28 > PM: Adding info for No Bus:tty29 > PM: Adding info for No Bus:tty30 > PM: Adding info for No Bus:tty31 > PM: Adding info for No Bus:tty32 > PM: Adding info for No Bus:tty33 > PM: Adding info for No Bus:tty34 > PM: Adding info for No Bus:tty35 > PM: Adding info for No Bus:tty36 > PM: Adding info for No Bus:tty37 > PM: Adding info for No Bus:tty38 > PM: Adding info for No Bus:tty39 > PM: Adding info for No Bus:tty40 > PM: Adding info for No Bus:tty41 > PM: Adding info for No Bus:tty42 > PM: Adding info for No Bus:tty43 > PM: Adding info for No Bus:tty44 > PM: Adding info for No Bus:tty45 > PM: Adding info for No Bus:tty46 > PM: Adding info for No Bus:tty47 > PM: Adding info for No Bus:tty48 > PM: Adding info for No Bus:tty49 > PM: Adding info for No Bus:tty50 > PM: Adding info for No Bus:tty51 > PM: Adding info for No Bus:tty52 > PM: Adding info for No Bus:tty53 > PM: Adding info for No Bus:tty54 > PM: Adding info for No Bus:tty55 > PM: Adding info for No Bus:tty56 > PM: Adding info for No Bus:tty57 > PM: Adding info for No Bus:tty58 > PM: Adding info for No Bus:tty59 > PM: Adding info for No Bus:tty60 > PM: Adding info for No Bus:tty61 > PM: Adding info for No Bus:tty62 > PM: Adding info for No Bus:tty63 > PM: Adding info for No Bus:rtc > Real Time Clock Driver v1.12ac > PM: Adding info for No Bus:hpet > hpet_resources: 0xfed00000 is busy > intel_rng: FWH not detected > Linux agpgart interface v0.102 > agpgart: Detected an Intel 945GM Chipset. > agpgart: Detected 7932K stolen memory. > PM: Adding info for No Bus:agpgart > agpgart: AGP aperture is 256M @ 0xc0000000 > [drm] Initialized drm 1.1.0 20060810 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 > [drm] Initialized i915 1.6.0 20060119 on minor 0 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > tg3.c:v3.80 (August 2, 2007) > PCI: Enabling device 0000:03:00.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > PM: Adding info for No Bus:eth0 > eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:1e:27:ad > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[76180000] dma_mask[64-bit] > PM: Adding info for No Bus:lo > ata_piix 0000:00:1f.2: version 2.11 > ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > Clocksource tsc unstable (delta = -117952383 ns) > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi0 : ata_piix > PM: Adding info for No Bus:host0 > scsi1 : ata_piix > PM: Adding info for No Bus:host1 > ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 > ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 > ata1.00: ATA-7: ST9100824AS, 3.06, max UDMA/133 > ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata1.00: configured for UDMA/133 > PM: Adding info for No Bus:target0:0:0 > scsi 0:0:0:0: Direct-Access ATA ST9100824AS 3.06 PQ: 0 ANSI: 5 > PM: Adding info for scsi:0:0:0:0 > sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > sd 0:0:0:0: [sda] Attached SCSI disk > Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0098] > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66 > Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 > Socket status: 30000006 > Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e > pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff > pcmcia: parent PCI bridge Memory window: 0xb0400000 - 0xb04fffff > pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff > PM: Adding info for No Bus:pcmcia_socket0 > PM: Adding info for No Bus:usbmon0 > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > PM: Adding info for No Bus:usbmon1 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 21, io mem 0xb0004000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > PM: Adding info for usb:usb1 > PM: Adding info for No Bus:usbdev1.1_ep00 > usb usb1: configuration #1 chosen from 1 choice > PM: Adding info for usb:1-0:1.0 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > PM: Adding info for No Bus:usbdev1.1_ep81 > PM: Adding info for No Bus:usbdev1.1 > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > PM: Adding info for No Bus:usbmon2 > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001820 > PM: Adding info for usb:usb2 > PM: Adding info for No Bus:usbdev2.1_ep00 > usb usb2: configuration #1 chosen from 1 choice > PM: Adding info for usb:2-0:1.0 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PM: Adding info for No Bus:usbdev2.1_ep81 > PM: Adding info for No Bus:usbdev2.1 > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > PM: Adding info for No Bus:usbmon3 > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 > PM: Adding info for usb:usb3 > PM: Adding info for No Bus:usbdev3.1_ep00 > usb usb3: configuration #1 chosen from 1 choice > PM: Adding info for usb:3-0:1.0 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > PM: Adding info for No Bus:usbdev3.1_ep81 > PM: Adding info for No Bus:usbdev3.1 > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > PM: Adding info for No Bus:usbmon4 > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 > PM: Adding info for usb:usb4 > PM: Adding info for No Bus:usbdev4.1_ep00 > usb usb4: configuration #1 chosen from 1 choice > PM: Adding info for usb:4-0:1.0 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 1-8: new high speed USB device using ehci_hcd and address 2 > PM: Adding info for No Bus:usbdev4.1_ep81 > PM: Adding info for No Bus:usbdev4.1 > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > PM: Adding info for No Bus:usbmon5 > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 > PM: Adding info for usb:usb5 > PM: Adding info for No Bus:usbdev5.1_ep00 > usb usb5: configuration #1 chosen from 1 choice > PM: Adding info for usb:5-0:1.0 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > PM: Adding info for No Bus:usbdev5.1_ep81 > PM: Adding info for No Bus:usbdev5.1 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > PM: Adding info for platform:i8042 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > PM: Adding info for serio:serio0 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > PM: Adding info for serio:serio1 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > PM: Adding info for serio:serio2 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > PM: Adding info for serio:serio3 > PM: Adding info for No Bus:mice > PM: Adding info for serio:serio4 > PM: Adding info for No Bus:psaux > mice: PS/2 mouse device common for all mice > PM: Adding info for No Bus:event0 > PM: Adding info for No Bus:event1 > PM: Adding info for No Bus:event2 > PM: Adding info for No Bus:event3 > PM: Adding info for No Bus:input4 > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 > PM: Adding info for No Bus:event4 > PM: Adding info for usb:1-8 > PM: Adding info for No Bus:usbdev1.2_ep00 > usb 1-8: configuration #1 chosen from 1 choice > PM: Adding info for usb:1-8:1.0 > PM: Adding info for No Bus:usbdev1.2_ep81 > PM: Adding info for No Bus:usbdev1.2_ep82 > PM: Adding info for No Bus:usbdev1.2 > PM: Adding info for No Bus:rtc0 > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > PM: Removing info for No Bus:rtc0 > rtc_cmos: probe of 00:06 failed with error -16 > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 > PM: Adding info for No Bus:i2c-0 > Bluetooth: HCI USB driver ver 2.9 > usbcore: registered new interface driver hci_usb > Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). > PM: Adding info for No Bus:timer > PM: Adding info for No Bus:sequencer > PM: Adding info for No Bus:sequencer2 > request_module: runaway loop modprobe net-pf-1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:seq > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > PM: Adding info for No Bus:card0 > PM: Adding info for No Bus:pcmC0D2c > PM: Adding info for No Bus:pcmC0D0p > PM: Adding info for No Bus:pcmC0D0c > PM: Adding info for No Bus:dsp > PM: Adding info for No Bus:audio > PM: Adding info for No Bus:controlC0 > PM: Adding info for No Bus:mixer > ALSA device list: > #0: HDA Intel at 0xb0000000 irq 22 > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@...ux.intel.com> > ieee80211_crypt: registered algorithm 'NULL' > ieee80211_crypt: registered algorithm 'WEP' > Using IPI No-Shortcut mode > swsusp: Resume From Partition /dev/sda5 > PM: Checking swsusp image. > PM: Resume from disk failed. > drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > Freeing unused kernel memory: 200k freed > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x204000 > PM: Adding info for No Bus:input5 > input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 > PM: Adding info for No Bus:mouse0 > PM: Adding info for No Bus:event5 > Attempting manual resume > swsusp: Resume From Partition 8:5 > PM: Checking swsusp image. > PM: Resume from disk failed. > swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 > swsusp: Basic memory bitmaps created > swsusp: Basic memory bitmaps freed > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > NET: Registered protocol family 23 > iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8k > iwl3945: Copyright(c) 2003-2007 Intel Corporation > PCI: Enabling device 0000:02:00.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection > PM: Adding info for No Bus:0000:02:00.0 > PM: Removing info for No Bus:0000:02:00.0 > ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 20 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > PM: Adding info for platform:serial8250 > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > PM: Adding info for No Bus:ttyS0 > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A > PM: Adding info for No Bus:ttyS1 > PM: Adding info for No Bus:ttyS2 > PM: Adding info for No Bus:ttyS3 > PM: Removing info for No Bus:ttyS0 > 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > PM: Adding info for No Bus:ttyS0 > ACPI: PCI Interrupt 0000:0a:09.1[A] -> GSI 20 (level, low) -> IRQ 20 > nsc-ircc, chip->init > nsc-ircc, Found chip at base=0x164e > nsc-ircc, driver loaded (Dag Brattli) > PM: Adding info for No Bus:irda0 > IrDA: Registered device irda0 > nsc-ircc, Found dongle: Supports SIR Mode only > PM: Adding info for platform:nsc-ircc.0 > iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels > PM: Adding info for No Bus:phy0 > PM: Adding info for No Bus:wmaster0 > wmaster0: Selected rate control algorithm 'iwl-3945-rs' > PM: Adding info for No Bus:wlan0 > udev: renamed network interface wlan0 to wireless > firewire_ohci: Added fw-ohci device 0000:0a:09.1, OHCI version 1.10 > PM: Adding info for firewire:fw0 > firewire_core: created new fw device fw0 (0 config rom retries, S400) > Adding 971892k swap on /dev/sda5. Priority:-1 extents:1 across:971892k > EXT3 FS on sda6, internal journal > PM: Adding info for platform:coretemp.0 > PM: Adding info for platform:coretemp.1 > fuse init (API version 7.8) > PM: Adding info for No Bus:fuse > pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. > pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. > pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Removing info for No Bus:vcs2 > PM: Removing info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Removing info for No Bus:vcs3 > PM: Removing info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Removing info for No Bus:vcs4 > PM: Removing info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Removing info for No Bus:vcs5 > PM: Removing info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Removing info for No Bus:vcs2 > PM: Removing info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Removing info for No Bus:vcs3 > PM: Removing info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Removing info for No Bus:vcs4 > PM: Removing info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Removing info for No Bus:vcs5 > PM: Removing info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs6 > PM: Adding info for No Bus:vcsa6 > PM: Removing info for No Bus:vcs6 > PM: Removing info for No Bus:vcsa6 > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Removing info for No Bus:vcs2 > PM: Removing info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Removing info for No Bus:vcs2 > PM: Removing info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Removing info for No Bus:vcs2 > PM: Removing info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Removing info for No Bus:vcs3 > PM: Removing info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Removing info for No Bus:vcs3 > PM: Removing info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Removing info for No Bus:vcs3 > PM: Removing info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Removing info for No Bus:vcs4 > PM: Removing info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Removing info for No Bus:vcs4 > PM: Removing info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Removing info for No Bus:vcs4 > PM: Removing info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Removing info for No Bus:vcs5 > PM: Removing info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Removing info for No Bus:vcs5 > PM: Removing info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Removing info for No Bus:vcs5 > PM: Removing info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs6 > PM: Adding info for No Bus:vcsa6 > PM: Removing info for No Bus:vcs6 > PM: Removing info for No Bus:vcsa6 > PM: Adding info for No Bus:vcs6 > PM: Adding info for No Bus:vcsa6 > PM: Removing info for No Bus:vcs6 > PM: Removing info for No Bus:vcsa6 > PM: Adding info for No Bus:vcs6 > PM: Adding info for No Bus:vcsa6 > PM: Removing info for No Bus:vcs6 > PM: Removing info for No Bus:vcsa6 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > PM: Removing info for No Bus:vcs1 > PM: Removing info for No Bus:vcsa1 > PM: Adding info for No Bus:vcs1 > PM: Adding info for No Bus:vcsa1 > wireless: Initial auth_alg=0 > wireless: authenticate with AP 00:1b:2f:50:ac:26 > wireless: RX authentication from 00:1b:2f:50:ac:26 (alg=0 transaction=2 status=0) > wireless: authenticated > wireless: associate with AP 00:1b:2f:50:ac:26 > wireless: RX AssocResp from 00:1b:2f:50:ac:26 (capab=0x431 status=0 aid=1) > wireless: associated > wireless: CTS protection enabled (BSSID=00:1b:2f:50:ac:26) > wireless: CTS protection disabled (BSSID=00:1b:2f:50:ac:26) > wireless: CTS protection enabled (BSSID=00:1b:2f:50:ac:26) > PM: Adding info for No Bus:vcs7 > PM: Adding info for No Bus:vcsa7 > PM: Removing info for No Bus:vcs7 > PM: Removing info for No Bus:vcsa7 > PM: Adding info for No Bus:vcs7 > PM: Adding info for No Bus:vcsa7 > PM: Adding info for No Bus:vcs2 > PM: Adding info for No Bus:vcsa2 > PM: Adding info for No Bus:vcs3 > PM: Adding info for No Bus:vcsa3 > PM: Adding info for No Bus:vcs4 > PM: Adding info for No Bus:vcsa4 > PM: Adding info for No Bus:vcs5 > PM: Adding info for No Bus:vcsa5 > PM: Adding info for No Bus:vcs6 > PM: Adding info for No Bus:vcsa6 > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists