| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070815094456.GA17804@havoc.gtf.org>
Date: Wed, 15 Aug 2007 05:44:56 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c | 9 ++++++++-
drivers/ata/libata-core.c | 2 +-
drivers/ata/pata_artop.c | 19 ++++++++++++++-----
drivers/ata/pata_hpt37x.c | 20 +++++++++-----------
drivers/ata/pata_hpt3x2n.c | 8 +++++---
drivers/ata/pata_isapnp.c | 2 ++
drivers/ata/sata_mv.c | 3 +++
7 files changed, 42 insertions(+), 21 deletions(-)
Alan Cox (1):
sata_mv: PCI IDs for Hightpoint RocketRaid 1740/1742
Bartlomiej Zolnierkiewicz (1):
pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
Jeff Garzik (1):
[libata] pata_isapnp: replace missing module device table
Ryan Power (1):
libata: adjust libata to ignore errors after spinup
Sergei Shtylyov (2):
pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
pata_hpt{37x|3x2n}: fix clock reporting (take 2)
Tejun Heo (2):
ata_piix: update map 10b for ich8m
ata_piix: add TECRA M7 to broken suspend list
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a78832e..071d274 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -436,7 +436,7 @@ static const struct piix_map_db ich8_map_db = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
{ RV, RV, RV, RV },
- { IDE, IDE, NA, NA }, /* 10b (IDE mode) */
+ { P0, P2, IDE, IDE }, /* 10b (IDE mode) */
{ RV, RV, RV, RV },
},
};
@@ -901,6 +901,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "TECRA M7",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),
+ },
+ },
+ {
.ident = "Satellite U205",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 60e78be..99d4fbf 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1723,7 +1723,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
tf.protocol = ATA_PROT_NODATA;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
- if (err_mask) {
+ if (err_mask && id[2] != 0x738c) {
rc = -EIO;
reason = "SPINUP failed";
goto err_out;
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index ce589d9..b5352eb 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,6 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat <alan@...hat.com>
+ * (C) 2007 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@...ux-ide.org>
@@ -28,7 +29,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -430,7 +431,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA4,
.port_ops = &artop6260_ops,
};
- static const struct ata_port_info info_626x_fast = {
+ static const struct ata_port_info info_628x = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
@@ -438,6 +439,14 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA5,
.port_ops = &artop6260_ops,
};
+ static const struct ata_port_info info_628x_fast = {
+ .sht = &artop_sht,
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &artop6260_ops,
+ };
const struct ata_port_info *ppi[] = { NULL, NULL };
if (!printed_version++)
@@ -455,13 +464,13 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
}
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
- else if (id->driver_data == 2) { /* 6260 or 6260 + fast */
+ else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
u8 reg;
- ppi[0] = &info_626x;
+ ppi[0] = &info_628x;
if (inb(io) & 0x10)
- ppi[0] = &info_626x_fast;
+ ppi[0] = &info_628x_fast;
/* Mac systems come up with some registers not set as we
will need them */
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 84d9c55..c5ddd93 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,12 +8,10 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@...ux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2006 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
*
* TODO
- * PLL mode
- * Look into engine reset on timeout errors. Should not be
- * required.
+ * Look into engine reset on timeout errors. Should not be required.
*/
#include <linux/kernel.h>
@@ -26,7 +24,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.7"
+#define DRV_VERSION "0.6.9"
struct hpt_clock {
u8 xfer_speed;
@@ -1092,9 +1090,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
int dpll, adjust;
/* Compute DPLL */
- dpll = 2;
- if (port->udma_mask & 0xE0)
- dpll = 3;
+ dpll = (port->udma_mask & 0xC0) ? 3 : 2;
f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
@@ -1116,7 +1112,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
}
if (adjust == 8) {
- printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
+ printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
return -ENODEV;
}
if (dpll == 3)
@@ -1124,7 +1120,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
else
private_data = (void *)hpt37x_timings_50;
- printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]);
+ printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
+ MHz[clock_slot], MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
/*
@@ -1137,7 +1134,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
port = &info_hpt370_33;
if (clock_slot < 2 && port == &info_hpt370a)
port = &info_hpt370a_33;
- printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
+ printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
+ chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index aa29cde..f8f234b 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
* Copyright (C) 1999-2003 Andre Hedrick <andre@...ux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2006 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
*
*
* TODO
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -579,10 +579,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
if (adjust == 8) {
- printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+ printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
return -ENODEV;
}
+ printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
+ pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
port.private_data = NULL;
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 5525518..91a396f 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -139,6 +139,8 @@ static struct pnp_device_id isapnp_devices[] = {
{.id = ""}
};
+MODULE_DEVICE_TABLE(pnp, isapnp_devices);
+
static struct pnp_driver isapnp_driver = {
.name = DRV_NAME,
.id_table = isapnp_devices,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 8ec5208..3acf65e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -621,6 +621,9 @@ static const struct pci_device_id mv_pci_tbl[] = {
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
+ /* RocketRAID 1740/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1740), chip_508x },
+ { PCI_VDEVICE(TTI, 0x1742), chip_508x },
{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists