| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070816091641.GC11373@elf.ucw.cz> Date: Thu, 16 Aug 2007 11:16:41 +0200 From: Pavel Machek <pavel@....cz> To: Andrew Morton <akpm@...l.org>, kernel list <linux-kernel@...r.kernel.org> Subject: [patch] s2ram: kill old debugging junk This removes old debugging stuff, that should be no longer neccessary. It accessed VGA hardware (which may not be ready at this point), and used LEDs at port 80 for debugging. Signed-off-by: Pavel Machek <pavel@...e.cz> diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index ed0a0f2..9cebef7 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -11,7 +11,7 @@ # Do we need to deal with A20? It is oka # # If physical address of wakeup_code is 0x12345, BIOS should call us with # cs = 0x1234, eip = 0x05 -# +# #define BEEP \ inb $97, %al; \ @@ -52,7 +52,6 @@ wakeup_code: BEEP 1: mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board - movw $0x0e00 + 'S', %fs:(0x12) pushl $0 # Kill any dangerous flags popfl @@ -90,9 +89,6 @@ wakeup_code: # make sure %cr4 is set correctly (features, etc) movl real_save_cr4 - wakeup_code, %eax movl %eax, %cr4 - movw $0xb800, %ax - movw %ax,%fs - movw $0x0e00 + 'i', %fs:(0x12) # need a gdt -- use lgdtl to force 32-bit operands, in case # the GDT is located past 16 megabytes. @@ -102,8 +98,6 @@ wakeup_code: movl %eax, %cr0 jmp 1f 1: - movw $0x0e00 + 'n', %fs:(0x14) - movl real_magic - wakeup_code, %eax cmpl $0x12345678, %eax jne bogus_real_magic @@ -122,13 +116,11 @@ real_save_cr4: .long 0 real_magic: .long 0 video_mode: .long 0 realmode_flags: .long 0 -beep_flags: .long 0 real_efer_save_restore: .long 0 real_save_efer_edx: .long 0 real_save_efer_eax: .long 0 bogus_real_magic: - movw $0x0e00 + 'B', %fs:(0x12) jmp bogus_real_magic /* This code uses an extended set of video mode numbers. These include: @@ -153,29 +145,9 @@ #define VIDEO_FIRST_V7 0x0900 # Setting of user mode (AX=mode ID) => CF=success mode_set: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif cmpb $VIDEO_FIRST_VESA>>8, %ah jnc check_vesa -#if 0 - orb %ah, %ah - jz setmenu -#endif decb %ah # jz setbios Add bios modes later @@ -215,7 +187,6 @@ wakeup_pmode_return: movw %ax, %es movw %ax, %fs movw %ax, %gs - movw $0x0e00 + 'u', 0xb8016 # reload the gdt, as we need the full 32 bit address lgdt saved_gdt @@ -239,7 +210,6 @@ wakeup_pmode_return: jmp *%eax bogus_magic: - movw $0x0e00 + 'B', 0xb8018 jmp bogus_magic diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S index 13f1480..fd09434 100644 --- a/arch/x86_64/kernel/acpi/wakeup.S +++ b/arch/x86_64/kernel/acpi/wakeup.S @@ -41,7 +41,6 @@ wakeup_code: # Running in *copy* of this code, somewhere in low 1MB. - movb $0xa1, %al ; outb %al, $0x80 cli cld # setup data segment @@ -65,11 +64,6 @@ # Running in *copy* of this code, somewh cmpl $0x12345678, %eax jne bogus_real_magic - call verify_cpu # Verify the cpu supports long - # mode - testl %eax, %eax - jnz no_longmode - testl $1, realmode_flags - wakeup_code jz 1f lcall $0xc000,$3 @@ -84,12 +78,6 @@ # Running in *copy* of this code, somewh call mode_seta 1: - movw $0xb800, %ax - movw %ax,%fs - movw $0x0e00 + 'L', %fs:(0x10) - - movb $0xa2, %al ; outb %al, $0x80 - mov %ds, %ax # Find 32bit wakeup_code addr movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) shll $4, %esi @@ -117,14 +105,10 @@ wakeup_32_vector: .code32 wakeup_32: # Running in this code, but at low address; paging is not yet turned on. - movb $0xa5, %al ; outb %al, $0x80 movl $__KERNEL_DS, %eax movl %eax, %ds - movw $0x0e00 + 'i', %ds:(0xb8012) - movb $0xa8, %al ; outb %al, $0x80; - /* * Prepare for entering 64bits mode */ @@ -200,16 +184,11 @@ wakeup_long64: */ lgdt cpu_gdt_descr - movw $0x0e00 + 'n', %ds:(0xb8014) - movb $0xa9, %al ; outb %al, $0x80 - movq saved_magic, %rax movq $0x123456789abcdef0, %rdx cmpq %rdx, %rax jne bogus_64_magic - movw $0x0e00 + 'u', %ds:(0xb8016) - nop nop movw $__KERNEL_DS, %ax @@ -220,13 +199,11 @@ wakeup_long64: movw %ax, %gs movq saved_rsp, %rsp - movw $0x0e00 + 'x', %ds:(0xb8018) movq saved_rbx, %rbx movq saved_rdi, %rdi movq saved_rsi, %rsi movq saved_rbp, %rbp - movw $0x0e00 + '!', %ds:(0xb801a) movq saved_rip, %rax jmp *%rax @@ -256,20 +233,12 @@ realmode_flags: .quad 0 .code16 bogus_real_magic: - movb $0xba,%al ; outb %al,$0x80 jmp bogus_real_magic .code64 bogus_64_magic: - movb $0xb3,%al ; outb %al,$0x80 jmp bogus_64_magic -.code16 -no_longmode: - movb $0xbc,%al ; outb %al,$0x80 - jmp no_longmode - -#include "../verify_cpu.S" /* This code uses an extended set of video mode numbers. These include: * Aliases for standard modes @@ -294,29 +263,9 @@ # Setting of user mode (AX=mode ID) => C .code16 mode_seta: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif cmpb $VIDEO_FIRST_VESA>>8, %ah jnc check_vesaa -#if 0 - orb %ah, %ah - jz setmenu -#endif decb %ah # jz setbios Add bios modes later -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists