Linux version 2.6.22.3-router2 (rainbow@pentium) (gcc version 4.1.2) #3 Mon Aug 20 19:16:29 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000002000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 32MB LOWMEM available. Entering add_active_range(0, 0, 8192) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 8192 early_node_map[1] active PFN ranges 0: 0 -> 8192 On node 0 totalpages: 8192 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 32 pages used for memmap Normal zone: 4064 pages, LIFO batch:0 DMI not present or invalid. Allocating PCI resources starting at 10000000 (gap: 02000000:fdff0000) Built 1 zonelists. Total pages: 8128 Kernel command line: auto BOOT_IMAGE=Linux26223 ro root=821 Initializing CPU#0 PID hash table entries: 128 (order: 7, 512 bytes) Detected 133.130 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 29668k/32768k available (1594k kernel code, 2716k reserved, 537k data, 132k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffc000 - 0xfffff000 ( 12 kB) vmalloc : 0xc2800000 - 0xffffa000 ( 983 MB) lowmem : 0xc0000000 - 0xc2000000 ( 32 MB) .init : 0xc0318000 - 0xc0339000 ( 132 kB) .data : 0xc028e8de - 0xc03150dc ( 537 kB) .text : 0xc0100000 - 0xc028e8de (1594 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 266.63 BogoMIPS (lpj=1333176) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 Intel Pentium with F0 0F bug - workaround enabled. CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Intel Pentium MMX stepping 03 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfad90, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbaf0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbb18, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized libata version 2.21 loaded. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) pnp: 00:07: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:07: iomem range 0x0-0x9ffff could not be reserved pnp: 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved pnp: 00:07: iomem range 0x100000-0x1ffffff could not be reserved pnp: 00:09: ioport range 0x208-0x20f has been reserved NET: Registered protocol family 2 Time: tsc clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered Activating ISA DMA hang workarounds. Boot video device is 0000:00:08.0 isapnp: Scanning for PnP cards... isapnp: Card '3Com 3C509B EtherLink III' isapnp: 1 Plug & Play card detected total lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 ppdev: user-space parallel port driver Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc 00:0c: reported by Plug and Play BIOS parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). loop: module loaded 3c59x: Donald Becker and others. 0000:00:09.0: 3Com PCI 3c905C Tornado at c2800000. ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x300: 00 40 33 25 7b fa eth1: NE2000 found at 0x300, using IRQ 3. pnp: Device 01:01.00 activated. eth2: 3c5x9 found at 0x220, BNC port, address 00 a0 24 be 47 3f, IRQ 5. 3c509.c:1.19b 08Nov2002 becker@scyld.com sata_via 0000:00:0a.0: version 2.2 sata_via 0000:00:0a.0: routed to hard irq line 12 scsi0 : sata_via scsi1 : sata_via scsi2 : sata_via ata1: SATA max UDMA/133 cmd 0x00016300 ctl 0x0001630a bmdma 0x00016700 irq 12 ata2: SATA max UDMA/133 cmd 0x00016400 ctl 0x0001640a bmdma 0x00016708 irq 12 ata3: PATA max UDMA/133 cmd 0x00016500 ctl 0x0001650a bmdma 0x00016710 irq 12 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 310) ata3.00: ATA-7: ST3250823A, 3.03, max UDMA/100 ata3.00: 488397168 sectors, multi 16: LBA48 ata3.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Direct-Access ATA ST3250823A 3.03 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg1 type 0 pata_via 0000:00:07.1: version 0.3.1 scsi3 : pata_via scsi4 : pata_via ata4: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016000 irq 14 ata5: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016008 irq 15 ata4.00: ATA-0: WDC AC21000H, 21.15T71, max MWDMA2 ata4.00: 2116800 sectors, multi 16: LBA ata4.00: configured for MWDMA2 scsi 3:0:0:0: Direct-Access ATA WDC AC21000H 21.1 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdc] 2116800 512-byte hardware sectors (1084 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] 2116800 512-byte hardware sectors (1084 MB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sd 3:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg2 type 0 PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: PC Speaker as /class/input/input0 md: raid1 personality registered for level 1 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (256 buckets, 2048 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input1 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda2 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed Adding 124984k swap on /dev/sdc2. Priority:-1 extents:1 across:124984k EXT3 FS on sdc1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting Rx mode to 1 addresses. PM: Writing back config space on device 0000:00:09.0 at offset 1 (was 82100007, writing 2100007) eth1: setting full-duplex. ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:40:97:c6:87/00:01:16:00:00/e0 tag 0 cdb 0x0 data 163840 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/100 ata3: EH complete ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:df:d1:87/00:04:16:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:f0:6f:5a:88/00:03:16:00:00/e0 tag 0 cdb 0x0 data 516096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: limiting speed to UDMA/66:PIO4 ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:c7:0e:89/00:04:16:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:07:14:89/00:04:16:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:1f:dd:89/00:04:16:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:07:e5:89/00:04:16:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:87:fb:a6/00:04:19:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: cmd 35/00:00:e7:07:a7/00:04:19:00:00/e0 tag 0 cdb 0x0 data 524288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA