linux-kernel - Re: [2.6.20.17 review 27/58] Include serial

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 22 Aug 2007 10:23:32 +0100
From:	Russell King <rmk+lkml@....linux.org.uk>
To:	Willy Tarreau <w@....eu>
Cc:	linux-kernel@...r.kernel.org, stable@...nel.org,
	Herton Ronaldo Krzesinski <herton@...driva.com.br>,
	Gustavo de Nardin <gustavodn@...driva.com.br>,
	David Woodhouse <dwmw2@...radead.org>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Greg Kroah-Hartman <gregkh@...e.de>
Subject: Re: [2.6.20.17 review 27/58] Include serial_reg.h with userspace headers

On Wed, Aug 22, 2007 at 11:39:11AM +0200, Willy Tarreau wrote:
> As reported by Gustavo de Nardin <gustavodn@...driva.com.br>, while trying to
> compile xosview (http://xosview.sourceforge.net/) with upstream kernel
> headers being used you get the following errors:
> serialmeter.cc:48:30: error: linux/serial_reg.h: No such file or directory
> serialmeter.cc: In member function 'virtual void
> SerialMeter::checkResources()':
> serialmeter.cc:71: error: 'UART_LSR' was not declared in this scope
> serialmeter.cc:71: error: 'UART_MSR' was not declared in this scope
> ..

It's probably a good thing to repeat what I said privately about this,
which is:

| It should be noted that reading the MSR or LSR of an active 8250 UART
| has side effects.  In the case of MSR, it clears the bits which indicate
| that the modem status signals have changed, and clears the associated
| interrupt.  This can result in loss of hardware flow control on the port.
| 
| For LSR, a read clears the error status reported in that register and
| clears the interrupt associated with the error status, resulting in
| errors being missed.
| 
| So, reading the LSR and MSR of an active port is Bad News(tm) and is
| something that userspace should absolutely avoid.  Instead, userspace
| should open the port in non-blocking mode and use the TIOCGICOUNT
| ioctl to retrieve the various activity counters and TIOCMGET to obtain
| the current modem status line state.
| 
| I would encourage xosview folk to switch to use these ioctls rather than
| reading the registers direct for the following reasons:
| 
| 1. It's supported by a wide variety of serial port implementations.
| 2. Avoids the mess associated with ioperm support noted in serialmeter.cc
|    revision 1.11
| 3. Avoids including kernel private kernel headers.
| 4. Avoids the buggy "autodetection" of serial IO base (which ignores the
|    IO type of the port, which may be MMIO.)
| 5. Avoids side effects associated with reading the ports registers.
| 
| For a tool which presumably is to assist diagnosing serial problems, it
| would seem to have the capability of causing further additional problems.

I leave it up to others to decide that keeping backwards compatibility
with userspace which is quite obviously broken is more important than
providing userspace with the persuasion to fix their broken code.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/