Config file read, 1765 bytes Welcome to yaboot version 1.3.13 Enter "help" to get some basic usage information boot: autobench Please wait, loading kernel... Elf64 kernel loaded... Loading ramdisk... ramdisk loaded at 01c00000, size: 4688 Kbytes OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020 command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1187786501 profile=2 memory layout at init: alloc_bottom : 0000000002094000 alloc_top : 0000000030000000 alloc_top_hi : 0000000280000000 rmo_top : 0000000030000000 ram_top : 0000000280000000 Looking for displays found display : /pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_A@0, opening ... done found display : /pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_B@1, opening ... done copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x0000000002495000 -> 0x000000000249664c Device tree struct 0x0000000002497000 -> 0x00000000024d0000 Calling quiesce ... returning from prom_init Hello World ! [ 0.000000] Starting Linux PPC64 #1 SMP Wed Aug 22 12:09:43 UTC 2007 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x200000000 [ 0.000000] ppc64_caches.dcache_line_size = 0x80 [ 0.000000] ppc64_caches.icache_line_size = 0x80 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Linux version 2.6.23-rc3-mm1-autokern1 (root@elm3b19) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 SMP Wed Aug 22 12:09:43 UTC 2007 CF000012 Setup Arch [ 0.000000] [boot]0012 Setup Arch [ 0.000000] vmemmap cf00000000000000 allocated at c000000003000000, physical 0000000003000000. [ 0.000000] vmemmap cf00000001000000 allocated at c000000004000000, physical 0000000004000000. [ 0.000000] vmemmap cf00000003000000 allocated at c000000005000000, physical 0000000005000000. [ 0.000000] vmemmap cf00000004000000 allocated at c000000006000000, physical 0000000006000000. [ 0.000000] vmemmap cf00000005000000 allocated at c000000007000000, physical 0000000007000000. [ 0.000000] vmemmap cf00000006000000 allocated at c000000008000000, physical 0000000008000000. [ 0.000000] vmemmap cf00000007000000 allocated at c000000009000000, physical 0000000009000000. [ 0.000000] vmemmap cf00000008000000 allocated at c00000000a000000, physical 000000000a000000. [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] via-pmu: Server Mode is enabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=708, gen1=709 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 2621440 [ 0.000000] Normal 2621440 -> 2621440 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 524288 [ 0.000000] 0: 1048576 -> 2621440 CF000015 Setup Done [ 0.000000] [boot]0015 Setup Done [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2061312 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1187786501 profile=2 [ 0.000000] kernel profiling enabled (shift: 2) [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.003214] Console: colour dummy device 80x25 [ 0.011743] console [tty0] enabled [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Found initrd at 0xc000000001c00000:0xc000000002094000 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0xb3 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] boot stdout isn't a display ! [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] console [udbg0] enabled [ 0.000000] Starting Linux PPC64 #1 SMP Wed Aug 22 12:09:43 UTC 2007 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x200000000 [ 0.000000] ppc64_caches.dcache_line_size = 0x80 [ 0.000000] ppc64_caches.icache_line_size = 0x80 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Linux version 2.6.23-rc3-mm1-autokern1 (root@elm3b19) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 SMP Wed Aug 22 12:09:43 UTC 2007 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] vmemmap cf00000000000000 allocated at c000000003000000, physical 0000000003000000. [ 0.000000] vmemmap cf00000001000000 allocated at c000000004000000, physical 0000000004000000. [ 0.000000] vmemmap cf00000003000000 allocated at c000000005000000, physical 0000000005000000. [ 0.000000] vmemmap cf00000004000000 allocated at c000000006000000, physical 0000000006000000. [ 0.000000] vmemmap cf00000005000000 allocated at c000000007000000, physical 0000000007000000. [ 0.000000] vmemmap cf00000006000000 allocated at c000000008000000, physical 0000000008000000. [ 0.000000] vmemmap cf00000007000000 allocated at c000000009000000, physical 0000000009000000. [ 0.000000] vmemmap cf00000008000000 allocated at c00000000a000000, physical 000000000a000000. [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] via-pmu: Server Mode is enabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=708, gen1=709 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 2621440 [ 0.000000] Normal 2621440 -> 2621440 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 524288 [ 0.000000] 0: 1048576 -> 2621440 [ 0.000000] [boot]0015 Setup Done [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2061312 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1187786501 profile=2 [ 0.000000] kernel profiling enabled (shift: 2) [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.003214] Console: colour dummy device 80x25 [ 0.011743] console [tty0] enabled [ 0.708611] console handover: boot [udbg0] -> real [ttyS0] [ 0.725250] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.748689] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.765422] freeing bootmem node 0 [ 0.921135] Memory: 8082052k/8388608k available (5048k kernel code, 306556k reserved, 832k data, 309k bss, 252k init) [ 1.028092] Security Framework initialized [ 1.035908] SELinux: Disabled at boot. [ 1.043570] Mount-cache hash table entries: 256 smp_core99_probe [ 1.057551] PowerMac SMP probe found 2 cpus [ 1.066010] KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000 [ 1.078888] channel 0 bus [ 1.086178] channel 1 bus [ 1.093491] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 [ 1.108578] channel 0 bus [ 1.115873] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c [ 1.129064] channel 1 bus [ 1.136355] channel 2 bus [ 1.143723] Processor timebase sync using Cypress i2c clock [ 1.154761] mpic: requesting IPIs ... smp_core99_kick_cpu smp_core99_kick_cpu done [ 1.171025] Processor 1 found. [ 1.215147] Brought up 2 CPUs core99_setup_cpu 0 done [ 1.225897] sysctl table check failed: /net/token-ring .3.14 procname does not match binary path procname [ 1.244890] NET: Registered protocol family 16 Linux ppc64 #1 SMP Wed Aug 22 12:09:43 UTC 2007 [ 1.262954] CPU Hotplug not supported by firmware - disabling. [ 1.309938] IOMMU table initialized, virtual merging disabled [ 1.331204] SCSI subsystem initialized [ 1.364955] NET: Registered protocol family 2 [ 1.432222] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.448896] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 1.480191] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.494591] TCP: Hash tables configured (established 524288 bind 65536) [ 1.507466] TCP reno registered [ 1.528272] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd [ 1.554215] Freeing initrd memory: 4688k freed [ 1.563108] sysctl table check failed: /kernel .1 Writable sysctl directory [ 1.576788] nvram_init: Could not find nvram partition for nvram buffered error logging. [ 1.593786] audit: initializing netlink socket (disabled) [ 1.604234] audit(1187786620.604:1): initialized [ 1.613795] Total HugeTLB memory allocated, 0 [ 1.622380] VFS: Disk quotas dquot_6.5.1 [ 1.629985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.643012] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.660471] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1.679805] SGI XFS Quota Management subsystem [ 1.688425] io scheduler noop registered [ 1.696130] io scheduler anticipatory registered [ 1.705329] io scheduler deadline registered [ 1.713862] io scheduler cfq registered (default) [ 1.922011] radeonfb: Found Open Firmware ROM Image [ 1.931401] radeonfb: Retrieved PLL infos from Open Firmware [ 1.942678] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=295.00 Mhz, System=365.00 MHz [ 1.959163] radeonfb: PLL min 12000 max 35000 [ 2.067770] i2c-adapter i2c-2: unable to read EDID block. [ 2.231767] i2c-adapter i2c-2: unable to read EDID block. [ 2.395767] i2c-adapter i2c-2: unable to read EDID block. [ 2.760995] radeonfb: Monitor 1 type CRT found [ 2.769507] radeonfb: Monitor 2 type no found [ 2.794350] Console: switching to colour frame buffer device 80x30 [ 2.812846] radeonfb (0000:f0:10.0): ATI Radeon AP [ 2.880571] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) [ 2.895079] ttyS0 at MMIO 0x80013020 mem 0xd0000800822e2020 (irq = 22) is a Z85c30 ESCC - Serial port [ 2.914992] ttyS1 at MMIO 0x80013000 mem 0xd0000800822e4000 (irq = 23) is a Z85c30 ESCC - Serial port [ 2.938517] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.958136] MacIO PCI driver attached to K2 chipset [ 2.971799] PowerMac G5 Thermal control driver 1.3 [ 2.983845] Detected fan controls: [ 2.992952] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN [ 3.007495] 1: RPM fan, id 2, location: DRIVE BAY [ 3.019860] 2: PWM fan, id 2, location: SLOT,PCI FAN [ 3.032822] 3: RPM fan, id 3, location: CPU A INTAKE [ 3.045859] 4: RPM fan, id 4, location: CPU A EXHAUST [ 3.059131] 5: RPM fan, id 5, location: CPU B INTAKE [ 3.072282] 6: RPM fan, id 6, location: CPU B EXHAUST [ 3.085771] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.101627] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.143997] ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39 [ 5.232368] hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive [ 5.248336] ide0 at 0xd0000800822fa000-0xd0000800822fa007,0xd0000800822fa160 on irq 39 [ 5.272976] mice: PS/2 mouse device common for all mice [ 5.288116] PowerMac i2c bus pmu 2 registered [ 5.301530] PowerMac i2c bus pmu 1 registered [ 5.314791] PowerMac i2c bus mac-io 0 registered [ 5.328493] PowerMac i2c bus u3 1 registered [ 5.341499] PowerMac i2c bus u3 0 registered [ 5.354201] TCP cubic registered [ 5.364880] input: PMU as /class/input/input0 [ 5.400152] RAMDISK: cramfs filesystem found at block 0 [ 5.414336] RAMDISK: Loading 4688KiB [1 disk] into ram disk...done. [ 5.533921] VFS: Mounted root (cramfs filesystem) readonly. [ 5.549385] Machine check in kernel mode. [ 5.560880] Caused by (from SRR1=9000000000009032): Transfer error ack signal [ 5.578607] Oops: Machine check, sig: 7 [#1] [ 5.590736] SMP NR_CPUS=32 NUMA PowerMac [ 5.602052] Modules linked in: [ 5.611551] NIP: c000000000279ee0 LR: c0000000000ab1c4 CTR: c000000000092cc8 [ 5.629323] REGS: c00000000dcdf040 TRAP: 0200 Not tainted (2.6.23-rc3-mm1-autokern1) [ 5.653218] MSR: 9000000000009032 CR: 24000022 XER: 00000000 [ 5.671260] TASK = c00000000e176000[774] 'linuxrc' THREAD: c00000000dcdc000 CPU: 0 [ 5.690056] GPR00: c00000000e207b08 c00000000dcdf2c0 c0000000005bfac0 c00000000e207848 [ 5.714493] GPR04: c00000000e10fb08 c00000000e207900 c00000000e2078f8 c00000000e2078f8 [ 5.739017] GPR08: 0000000000000000 c00000000e2078f8 c00000000e2078f8 0000000000000000 [ 5.763600] GPR12: c00000000e2078f8 c000000000505280 0000000010028230 0000000000000000 [ 5.788276] GPR16: 0000000000000002 0000000000000000 0000000000000000 0000000000000802 [ 5.813137] GPR20: 0000000000029000 0000000000000029 0000000000000000 0000000000000001 [ 5.838609] GPR24: 0000000000000000 c00000000e10fb00 c00000000e2078f8 c00000000e10fb08 [ 5.864713] GPR28: c00000000e207848 c00000000e207848 c00000000055af48 c00000000e207b08 [ 5.897143] NIP [c000000000279ee0] .rb_insert_color+0x5c/0x194 [ 5.914305] LR [c0000000000ab1c4] .__vma_link_rb+0x30/0x44 [ 5.930736] Call Trace: [ 5.941092] [c00000000dcdf2c0] [c00000000e004580] 0xc00000000e004580 (unreliable) [ 5.966930] [c00000000dcdf360] [c0000000000ab1c4] .__vma_link_rb+0x30/0x44 [ 5.986182] [c00000000dcdf3e0] [c0000000000ab230] .__vma_link+0x58/0x78 [ 6.004896] [c00000000dcdf460] [c0000000000ab79c] .vma_link+0x94/0x1b8 [ 6.023345] [c00000000dcdf510] [c0000000000ada44] .mmap_region+0x330/0x4d8 [ 6.042415] [c00000000dcdf620] [c000000000011fcc] .elf_map+0xb8/0x19c [ 6.060511] [c00000000dcdf6d0] [c000000000013064] .load_elf_binary+0xfb4/0x1a4c [ 6.085519] [c00000000dcdf830] [c0000000000d0c1c] .search_binary_handler+0x104/0x310 [ 6.111417] [c00000000dcdf8e0] [c000000000111cc0] .load_script+0x278/0x2b4 [ 6.130289] [c00000000dcdfa10] [c0000000000d0c1c] .search_binary_handler+0x104/0x310 [ 6.155961] [c00000000dcdfac0] [c0000000000d0fac] .do_execve+0x184/0x244 [ 6.174367] [c00000000dcdfb70] [c00000000000f278] .sys_execve+0x70/0xf4 [ 6.192490] [c00000000dcdfc10] [c00000000000852c] syscall_exit+0x0/0x40 [ 6.210486] --- Exception: c01 at .kernel_execve+0x8/0x14 [ 6.226093] LR = .do_linuxrc+0xa4/0xc0 [ 6.239060] [c00000000dcdff00] [c0000000004b31f4] .do_linuxrc+0x90/0xc0 (unreliable) [ 6.263900] [c00000000dcdff90] [c000000000023ef4] .kernel_thread+0x4c/0x68 [ 6.282270] Instruction dump: [ 6.292794] e97f0010 7fa95800 409e0070 e97f0008 2fab0000 419e0010 e80b0000 780807e1 [ 6.317509] 4182006c eba90008 7fbde000 409e0018 <7d234b78> 7f64db78 7d3c4b78 4bffff1d