| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070827212953.GK26410@stusta.de>
Date: Mon, 27 Aug 2007 23:29:53 +0200
From: Adrian Bunk <bunk@...nel.org>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Kumar Gala <galak@...escale.com>,
David Gibson <david@...son.dropbear.id.au>,
Paul Mackerras <paulus@...ba.org>, linuxppc-dev@...abs.org,
linux-kernel@...r.kernel.org, linux-m68k@...r.kernel.org
Subject: [2.6 patch] ppc: remove APUS support
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years
This patch therefore removes the remaining parts of APUS support.
Signed-off-by: Adrian Bunk <bunk@...sta.de>
---
This patch has been sent on:
- 29 Jul 2007
- 1 Jul 2007
Due to a charset problem that might corrupt the patch (a comment
contains a non UTF-8 character) the same patch is also attached
compressed.
arch/m68k/amiga/chipram.c | 2
arch/powerpc/kernel/setup_32.c | 1
arch/ppc/Kconfig | 148 ----
arch/ppc/Makefile | 1
arch/ppc/amiga/Makefile | 8
arch/ppc/amiga/amiga_ksyms.c | 1
arch/ppc/amiga/amiints.c | 322 ---------
arch/ppc/amiga/amisound.c | 1
arch/ppc/amiga/bootinfo.c | 78 --
arch/ppc/amiga/chipram.c | 1
arch/ppc/amiga/cia.c | 176 -----
arch/ppc/amiga/config.c | 953 ----------------------------
arch/ppc/amiga/ints.c | 158 ----
arch/ppc/amiga/pcmcia.c | 1
arch/ppc/amiga/time.c | 57 -
arch/ppc/configs/apus_defconfig | 920 ---------------------------
arch/ppc/kernel/head.S | 117 ---
arch/ppc/kernel/ppc_ksyms.c | 3
arch/ppc/kernel/setup.c | 1
arch/ppc/mm/pgtable.c | 38 -
arch/ppc/platforms/Makefile | 4
arch/ppc/platforms/apus_pci.c | 207 ------
arch/ppc/platforms/apus_pci.h | 34
arch/ppc/platforms/apus_setup.c | 798 -----------------------
drivers/ide/ide-probe.c | 8
drivers/isdn/hisax/avm_pci.c | 8
drivers/scsi/a2091.c | 3
drivers/scsi/a3000.c | 3
drivers/scsi/gvp11.c | 3
drivers/scsi/oktagon_esp.c | 2
drivers/scsi/oktagon_io.S | 72 --
drivers/video/console/fbcon.c | 2
drivers/video/console/fonts.c | 4
include/asm-m68k/pgtable.h | 2
include/asm-powerpc/ide.h | 2
include/asm-powerpc/reg.h | 4
include/asm-ppc/amigahw.h | 16
include/asm-ppc/amigaints.h | 133 ---
include/asm-ppc/amigappc.h | 85 --
include/asm-ppc/bootinfo.h | 5
include/asm-ppc/io.h | 48 -
include/asm-ppc/machdep.h | 4
include/asm-ppc/page.h | 44 -
include/asm-ppc/pgtable.h | 8
sound/oss/dmasound/Kconfig | 2
sound/oss/dmasound/dmasound_paula.c | 4
46 files changed, 24 insertions(+), 4468 deletions(-)
--- linux-2.6.22-rc6-mm1/arch/ppc/Kconfig.old 2007-06-30 00:50:49.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/Kconfig 2007-06-30 01:37:18.000000000 +0200
@@ -573,24 +573,9 @@ choice
Select PReP if configuring for a PReP machine.
- Select Gemini if configuring for a Synergy Microsystems' Gemini
- series Single Board Computer. More information is available at:
- <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
- Select APUS if configuring for a PowerUP Amiga. More information is
- available at: <http://linux-apus.sourceforge.net/>.
-
config PPC_PREP
bool "PReP"
-config APUS
- bool "Amiga-APUS"
- depends on BROKEN
- help
- Select APUS if configuring for a PowerUP Amiga.
- More information is available at:
- <http://linux-apus.sourceforge.net/>.
-
config KATANA
bool "Artesyn-Katana"
help
@@ -1027,132 +1012,6 @@ config CMDLINE
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
-config AMIGA
- bool
- depends on APUS
- default y
- help
- This option enables support for the Amiga series of computers.
-
-config ZORRO
- bool
- depends on APUS
- default y
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
-
-config ABSTRACT_CONSOLE
- bool
- depends on APUS
- default y
-
-config APUS_FAST_EXCEPT
- bool
- depends on APUS
- default y
-
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support"
- depends on APUS && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on APUS
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on APUS
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on APUS
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config A2232
- tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && APUS
- ---help---
- This option supports the 2232 7-port serial card shipped with the
- Amiga 2000 and other Zorro-bus machines, dating from 1989. At
- a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
- each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
- ports were connected with 8 pin DIN connectors on the card bracket,
- for which 8 pin to DB25 adapters were supplied. The card also had
- jumpers internally to toggle various pinning configurations.
-
- This driver can be built as a module; but then "generic_serial"
- will also be built as a module. This has to be loaded before
- "ser_a2232". If you want to do this, answer M here.
-
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the
- module will be called apne.
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat"
- depends on APUS
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-config PROC_HARDWARE
- bool "/proc/hardware support"
- depends on APUS
-
-source "drivers/zorro/Kconfig"
-
if !44x || BROKEN
source kernel/power/Kconfig
endif
@@ -1227,8 +1086,7 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
- default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+ default y if !40x && !CPM2 && !8xx && !83xx && !85xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
@@ -1282,10 +1140,6 @@ config 8260_PCI9_IDMA4
endchoice
-config PCI_PERMEDIA
- bool "PCI for Permedia2"
- depends on !4xx && !8xx && APUS
-
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
--- linux-2.6.22-rc6-mm1/sound/oss/dmasound/Kconfig.old 2007-06-30 00:59:18.000000000 +0200
+++ linux-2.6.22-rc6-mm1/sound/oss/dmasound/Kconfig 2007-06-30 00:59:31.000000000 +0200
@@ -14,7 +14,7 @@ config DMASOUND_ATARI
config DMASOUND_PAULA
tristate "Amiga DMA sound support"
- depends on (AMIGA || APUS) && SOUND
+ depends on AMIGA && SOUND
select DMASOUND
help
If you want to use the internal audio of your Amiga in Linux, answer
--- linux-2.6.22-rc6-mm1/arch/m68k/amiga/chipram.c.old 2007-06-30 01:01:00.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/m68k/amiga/chipram.c 2007-06-30 01:01:08.000000000 +0200
@@ -29,12 +29,10 @@ void __init amiga_chip_init(void)
if (!AMIGAHW_PRESENT(CHIP_RAM))
return;
-#ifndef CONFIG_APUS_FAST_EXCEPT
/*
* Remove the first 4 pages where PPC exception handlers will be located
*/
amiga_chip_size -= 0x4000;
-#endif
chipram_res.end = amiga_chip_size-1;
request_resource(&iomem_resource, &chipram_res);
--- linux-2.6.22-rc6-mm1/arch/ppc/Makefile.old 2007-06-30 01:01:52.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/Makefile 2007-06-30 01:01:57.000000000 +0200
@@ -69,7 +69,6 @@ core-$(CONFIG_83xx) += arch/ppc/platfor
core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/ppc/xmon/
-core-$(CONFIG_APUS) += arch/ppc/amiga/
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
--- linux-2.6.22-rc6-mm1/arch/ppc/kernel/head.S.old 2007-06-30 01:03:15.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/kernel/head.S 2007-06-30 01:04:54.000000000 +0200
@@ -32,10 +32,6 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
-#ifdef CONFIG_APUS
-#include <asm/amigappc.h>
-#endif
-
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
@@ -128,14 +124,6 @@ __start:
*/
bl early_init
-#ifdef CONFIG_APUS
-/* On APUS the __va/__pa constants need to be set to the correct
- * values before continuing.
- */
- mr r4,r30
- bl fix_mem_constants
-#endif /* CONFIG_APUS */
-
/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
* the physical address we are running at, returned by early_init()
*/
@@ -145,7 +133,7 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
-#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+#ifdef CONFIG_BOOTX_TEXT
bl setup_disp_bat
#endif
@@ -161,7 +149,6 @@ __after_mmu_off:
#endif /* CONFIG_6xx */
-#ifndef CONFIG_APUS
/*
* We need to run with _start at physical address 0.
* If the MMU is already turned on, we copy stuff to KERNELBASE,
@@ -172,7 +159,7 @@ __after_mmu_off:
addis r4,r3,KERNELBASE@h /* current address of _start */
cmpwi 0,r4,0 /* are we already running at 0? */
bne relocate_kernel
-#endif /* CONFIG_APUS */
+
/*
* we now have the 1st 16M of ram mapped with the bats.
* prep needs the mmu to be turned on here, but pmac already has it on.
@@ -812,85 +799,6 @@ copy_and_flush:
addi r6,r6,4
blr
-#ifdef CONFIG_APUS
-/*
- * On APUS the physical base address of the kernel is not known at compile
- * time, which means the __pa/__va constants used are incorrect. In the
- * __init section is recorded the virtual addresses of instructions using
- * these constants, so all that has to be done is fix these before
- * continuing the kernel boot.
- *
- * r4 = The physical address of the kernel base.
- */
-fix_mem_constants:
- mr r10,r4
- addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */
- neg r11,r10 /* phys_to_virt constant */
-
- lis r12,__vtop_table_begin@h
- ori r12,r12,__vtop_table_begin@l
- add r12,r12,r10 /* table begin phys address */
- lis r13,__vtop_table_end@h
- ori r13,r13,__vtop_table_end@l
- add r13,r13,r10 /* table end phys address */
- subi r12,r12,4
- subi r13,r13,4
-1: lwzu r14,4(r12) /* virt address of instruction */
- add r14,r14,r10 /* phys address of instruction */
- lwz r15,0(r14) /* instruction, now insert top */
- rlwimi r15,r10,16,16,31 /* half of vp const in low half */
- stw r15,0(r14) /* of instruction and restore. */
- dcbst r0,r14 /* write it to memory */
- sync
- icbi r0,r14 /* flush the icache line */
- cmpw r12,r13
- bne 1b
- sync /* additional sync needed on g4 */
- isync
-
-/*
- * Map the memory where the exception handlers will
- * be copied to when hash constants have been patched.
- */
-#ifdef CONFIG_APUS_FAST_EXCEPT
- lis r8,0xfff0
-#else
- lis r8,0
-#endif
- ori r8,r8,0x2 /* 128KB, supervisor */
- mtspr SPRN_DBAT3U,r8
- mtspr SPRN_DBAT3L,r8
-
- lis r12,__ptov_table_begin@h
- ori r12,r12,__ptov_table_begin@l
- add r12,r12,r10 /* table begin phys address */
- lis r13,__ptov_table_end@h
- ori r13,r13,__ptov_table_end@l
- add r13,r13,r10 /* table end phys address */
- subi r12,r12,4
- subi r13,r13,4
-1: lwzu r14,4(r12) /* virt address of instruction */
- add r14,r14,r10 /* phys address of instruction */
- lwz r15,0(r14) /* instruction, now insert top */
- rlwimi r15,r11,16,16,31 /* half of pv const in low half*/
- stw r15,0(r14) /* of instruction and restore. */
- dcbst r0,r14 /* write it to memory */
- sync
- icbi r0,r14 /* flush the icache line */
- cmpw r12,r13
- bne 1b
-
- sync /* additional sync needed on g4 */
- isync /* No speculative loading until now */
- blr
-
-/***********************************************************************
- * Please note that on APUS the exception handlers are located at the
- * physical address 0xfff0000. For this reason, the exception handlers
- * cannot use relative branches to access the code below.
- ***********************************************************************/
-#endif /* CONFIG_APUS */
-
#ifdef CONFIG_SMP
.globl __secondary_start_pmac_0
__secondary_start_pmac_0:
@@ -1043,19 +951,6 @@ start_here:
bl machine_init
bl MMU_init
-#ifdef CONFIG_APUS
- /* Copy exception code to exception vector base on APUS. */
- lis r4,KERNELBASE@h
-#ifdef CONFIG_APUS_FAST_EXCEPT
- lis r3,0xfff0 /* Copy to 0xfff00000 */
-#else
- lis r3,0 /* Copy to 0x00000000 */
-#endif
- li r5,0x4000 /* # bytes of memory to copy */
- li r6,0
- bl copy_and_flush /* copy the first 0x4000 bytes */
-#endif /* CONFIG_APUS */
-
/*
* Go back to running unmapped so we can load up new values
* for SDR1 (hash table pointer) and the segment registers
@@ -1232,11 +1127,7 @@ initial_bats:
#else
ori r8,r8,2 /* R/W access */
#endif /* CONFIG_SMP */
-#ifdef CONFIG_APUS
- ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */
-#else
ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
-#endif /* CONFIG_APUS */
mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
@@ -1245,7 +1136,7 @@ initial_bats:
isync
blr
-#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+#ifdef CONFIG_BOOTX_TEXT
setup_disp_bat:
/*
* setup the display bat prepared for us in prom.c
@@ -1268,7 +1159,7 @@ setup_disp_bat:
mtspr SPRN_IBAT3U,r11
blr
-#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+#endif /* defined(CONFIG_BOOTX_TEXT) */
#ifdef CONFIG_8260
/* Jump into the system reset for the rom.
--- linux-2.6.22-rc6-mm1/arch/ppc/platforms/Makefile.old 2007-06-30 01:05:05.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/platforms/Makefile 2007-06-30 01:05:19.000000000 +0200
@@ -2,10 +2,6 @@
# Makefile for the linux kernel.
#
-obj-$(CONFIG_APUS) += apus_setup.o
-ifeq ($(CONFIG_APUS),y)
-obj-$(CONFIG_PCI) += apus_pci.o
-endif
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
--- linux-2.6.22-rc6-mm1/drivers/ide/ide-probe.c.old 2007-06-30 01:06:35.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/ide/ide-probe.c 2007-06-30 01:07:23.000000000 +0200
@@ -1096,9 +1096,9 @@ static int init_irq (ide_hwif_t *hwif)
*/
if (!match || match->irq != hwif->irq) {
int sa = IRQF_DISABLED;
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
sa = IRQF_SHARED;
-#endif /* __mc68000__ || CONFIG_APUS */
+#endif /* __mc68000__ */
if (IDE_CHIPSET_IS_PCI(hwif->chipset)) {
sa = IRQF_SHARED;
@@ -1141,7 +1141,7 @@ static int init_irq (ide_hwif_t *hwif)
spin_unlock_irq(&ide_lock);
}
-#if !defined(__mc68000__) && !defined(CONFIG_APUS)
+#if !defined(__mc68000__)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -1149,7 +1149,7 @@ static int init_irq (ide_hwif_t *hwif)
#else
printk("%s at 0x%08lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
-#endif /* __mc68000__ && CONFIG_APUS */
+#endif /* __mc68000__ */
if (match)
printk(" (%sed with %s)",
hwif->sharing_irq ? "shar" : "serializ", match->name);
--- linux-2.6.22-rc6-mm1/drivers/isdn/hisax/avm_pci.c.old 2007-06-30 01:07:31.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/isdn/hisax/avm_pci.c 2007-06-30 01:07:48.000000000 +0200
@@ -264,11 +264,7 @@ hdlc_empty_fifo(struct BCState *bcs, int
outl(idx, cs->hw.avm.cfg_reg + 4);
while (cnt < count) {
#ifdef __powerpc__
-#ifdef CONFIG_APUS
- *ptr++ = in_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
-#else
*ptr++ = in_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
-#endif /* CONFIG_APUS */
#else
*ptr++ = inl(cs->hw.avm.isac);
#endif /* __powerpc__ */
@@ -329,11 +325,7 @@ hdlc_fill_fifo(struct BCState *bcs)
if (cs->subtyp == AVM_FRITZ_PCI) {
while (cnt<count) {
#ifdef __powerpc__
-#ifdef CONFIG_APUS
- out_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
-#else
out_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
-#endif /* CONFIG_APUS */
#else
outl(*ptr++, cs->hw.avm.isac);
#endif /* __powerpc__ */
--- linux-2.6.22-rc6-mm1/drivers/scsi/oktagon_esp.c.old 2007-06-30 01:07:59.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/scsi/oktagon_esp.c 2007-06-30 01:08:10.000000000 +0200
@@ -7,7 +7,7 @@
*/
-#if defined(CONFIG_AMIGA) || defined(CONFIG_APUS)
+#if defined(CONFIG_AMIGA)
#define USE_BOTTOM_HALF
#endif
--- linux-2.6.22-rc6-mm1/drivers/scsi/oktagon_io.S.old 2007-06-30 01:08:38.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/scsi/oktagon_io.S 2007-06-30 01:09:05.000000000 +0200
@@ -24,77 +24,6 @@ int oktag_from_io(long *addr,long *paddr
*/
-#ifdef CONFIG_APUS
-
- .file "oktagon_io.c"
-
-gcc2_compiled.:
-/*
- .section ".text"
-*/
- .align 2
- .globl oktag_to_io
- .type oktag_to_io,@function
-oktag_to_io:
- addi 5,5,3
- srwi 5,5,2
- cmpwi 1,5,0
- mr 9,3
- mr 3,4
- addi 5,5,-1
- bc 12,6,.L3
-.L5:
- cmpwi 1,5,0
- lwz 0,0(3)
- addi 3,3,4
- addi 5,5,-1
-exp1: stw 0,0(9)
- bc 4,6,.L5
-.L3:
-ret1: subf 3,4,3
- srawi 3,3,2
- blr
-.Lfe1:
- .size oktag_to_io,.Lfe1-oktag_to_io
- .align 2
- .globl oktag_from_io
- .type oktag_from_io,@function
-oktag_from_io:
- addi 5,5,3
- srwi 5,5,2
- cmpwi 1,5,0
- mr 9,3
- addi 5,5,-1
- bc 12,6,.L9
-.L11:
- cmpwi 1,5,0
-exp2: lwz 0,0(4)
- addi 5,5,-1
- stw 0,0(3)
- addi 3,3,4
- bc 4,6,.L11
-.L9:
-ret2: subf 3,9,3
- srawi 3,3,2
- blr
-.Lfe2:
- .size oktag_from_io,.Lfe2-oktag_from_io
- .ident "GCC: (GNU) egcs-2.90.29 980515 (egcs-1.0.3 release)"
-
-/*
- * Exception table.
- * Second longword shows where to jump when an exception at the addr the first
- * longword is pointing to is caught.
- */
-
-.section __ex_table,"a"
- .align 2
-oktagon_except:
- .long exp1,ret1
- .long exp2,ret2
-
-#else
-
/*
The code which follows is for 680x0 based assembler and is meant for
Linux/m68k. It was created by cross compiling the code using the
@@ -191,4 +120,3 @@ oktagon_except:
.long exp2,ret2
#endif
-#endif
--- linux-2.6.22-rc6-mm1/drivers/video/console/fbcon.c.old 2007-06-30 01:09:16.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/video/console/fbcon.c 2007-06-30 01:09:23.000000000 +0200
@@ -85,7 +85,7 @@
#ifdef CONFIG_MAC
#include <asm/macints.h>
#endif
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
#include <asm/machdep.h>
#include <asm/setup.h>
#endif
--- linux-2.6.22-rc6-mm1/drivers/video/console/fonts.c.old 2007-06-30 01:09:33.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/video/console/fonts.c 2007-06-30 01:09:44.000000000 +0200
@@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
#include <asm/setup.h>
#endif
#include <linux/font.h>
@@ -120,7 +120,7 @@ const struct font_desc *get_default_font
for(i=0; i<num_fonts; i++) {
f = fonts[i];
c = f->pref;
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
#ifdef CONFIG_FONT_PEARL_8x8
if (MACH_IS_AMIGA && f->idx == PEARL8x8_IDX)
c = 100;
--- linux-2.6.22-rc6-mm1/include/asm-powerpc/ide.h.old 2007-06-30 01:10:00.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-powerpc/ide.h 2007-06-30 01:10:14.000000000 +0200
@@ -67,7 +67,7 @@ static __inline__ unsigned long ide_defa
#define ide_init_default_irq(base) ide_default_irq(base)
#endif
-#if (defined CONFIG_APUS || defined CONFIG_BLK_DEV_MPC8xx_IDE )
+#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
#define IDE_ARCH_ACK_INTR 1
#define ide_ack_intr(hwif) (hwif->hw.ack_intr ? hwif->hw.ack_intr(hwif) : 1)
#endif
--- linux-2.6.22-rc6-mm1/include/asm-powerpc/reg.h.old 2007-06-30 01:10:22.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-powerpc/reg.h 2007-06-30 01:10:31.000000000 +0200
@@ -102,12 +102,8 @@
#else /* 32-bit */
/* Default MSR for kernel mode. */
#ifndef MSR_KERNEL /* reg_booke.h also defines this */
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
-#else
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#endif
-#endif
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
--- linux-2.6.22-rc6-mm1/include/asm-ppc/bootinfo.h.old 2007-06-30 01:12:56.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-ppc/bootinfo.h 2007-06-30 01:13:07.000000000 +0200
@@ -11,10 +11,6 @@
#include <asm/page.h>
-#if defined(CONFIG_APUS) && !defined(__BOOTER__)
-#include <asm-m68k/bootinfo.h>
-#else
-
struct bi_record {
unsigned long tag; /* tag ID */
unsigned long size; /* size of record (in bytes) */
@@ -44,7 +40,6 @@ bootinfo_addr(unsigned long offset)
return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
(1 << 20));
}
-#endif /* CONFIG_APUS */
#endif /* _PPC_BOOTINFO_H */
--- linux-2.6.22-rc6-mm1/include/asm-ppc/io.h.old 2007-06-30 01:13:17.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-ppc/io.h 2007-06-30 02:00:34.000000000 +0200
@@ -30,7 +30,7 @@
#include <asm/mpc8xx.h>
#elif defined(CONFIG_8260)
#include <asm/mpc8260.h>
-#elif defined(CONFIG_APUS) || !defined(CONFIG_PCI)
+#elif !defined(CONFIG_PCI)
#define _IO_BASE 0
#define _ISA_MEM_BASE 0
#define PCI_DRAM_OFFSET 0
@@ -145,24 +145,7 @@ static inline void writeb(__u8 b, volati
}
#endif
-#if defined(CONFIG_APUS)
-static inline __u16 readw(const volatile void __iomem *addr)
-{
- return *(__force volatile __u16 *)(addr);
-}
-static inline __u32 readl(const volatile void __iomem *addr)
-{
- return *(__force volatile __u32 *)(addr);
-}
-static inline void writew(__u16 b, volatile void __iomem *addr)
-{
- *(__force volatile __u16 *)(addr) = b;
-}
-static inline void writel(__u32 b, volatile void __iomem *addr)
-{
- *(__force volatile __u32 *)(addr) = b;
-}
-#elif defined (CONFIG_8260_PCI9)
+#if defined (CONFIG_8260_PCI9)
/* Use macros if PCI9 workaround enabled */
#define readw(addr) in_le16((volatile u16 *)(addr))
#define readl(addr) in_le32((volatile u32 *)(addr))
@@ -185,7 +168,7 @@ static inline void writel(__u32 b, volat
{
out_le32(addr, b);
}
-#endif /* CONFIG_APUS */
+#endif /* CONFIG_8260_PCI9 */
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
@@ -300,13 +283,7 @@ extern __inline__ void name(unsigned int
}
__do_out_asm(outb, "stbx")
-#ifdef CONFIG_APUS
-__do_in_asm(inb, "lbzx")
-__do_in_asm(inw, "lhz%U1%X1")
-__do_in_asm(inl, "lwz%U1%X1")
-__do_out_asm(outl,"stw%U0%X0")
-__do_out_asm(outw, "sth%U0%X0")
-#elif defined (CONFIG_8260_PCI9)
+#if defined (CONFIG_8260_PCI9)
/* in asm cannot be defined if PCI9 workaround is used */
#define inb(port) in_8((port)+___IO_BASE)
#define inw(port) in_le16((port)+___IO_BASE)
@@ -371,7 +348,6 @@ extern void __iomem *ioremap64(unsigned
#define ioremap_nocache(addr, size) ioremap((addr), (size))
extern void iounmap(volatile void __iomem *addr);
extern unsigned long iopa(unsigned long addr);
-extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
@@ -384,24 +360,16 @@ extern void io_block_mapping(unsigned lo
*/
extern inline unsigned long virt_to_bus(volatile void * address)
{
-#ifndef CONFIG_APUS
if (address == (void *)0)
return 0;
return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
-#else
- return iopa ((unsigned long) address);
-#endif
}
extern inline void * bus_to_virt(unsigned long address)
{
-#ifndef CONFIG_APUS
if (address == 0)
return NULL;
return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
-#else
- return (void*) mm_ptov (address);
-#endif
}
/*
@@ -410,20 +378,12 @@ extern inline void * bus_to_virt(unsigne
*/
extern inline unsigned long virt_to_phys(volatile void * address)
{
-#ifndef CONFIG_APUS
return (unsigned long) address - KERNELBASE;
-#else
- return iopa ((unsigned long) address);
-#endif
}
extern inline void * phys_to_virt(unsigned long address)
{
-#ifndef CONFIG_APUS
return (void *) (address + KERNELBASE);
-#else
- return (void*) mm_ptov (address);
-#endif
}
/*
--- linux-2.6.22-rc6-mm1/include/asm-ppc/machdep.h.old 2007-06-30 01:14:22.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-ppc/machdep.h 2007-06-30 01:14:31.000000000 +0200
@@ -8,10 +8,6 @@
#include <asm/setup.h>
#include <asm/page.h>
-#ifdef CONFIG_APUS
-#include <asm-m68k/machdep.h>
-#endif
-
struct pt_regs;
struct pci_bus;
struct pci_dev;
--- linux-2.6.22-rc6-mm1/include/asm-ppc/page.h.old 2007-06-30 01:14:41.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-ppc/page.h 2007-06-30 01:20:35.000000000 +0200
@@ -97,62 +97,22 @@ extern void clear_user_page(void *page,
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *pg);
-#ifndef CONFIG_APUS
#define PPC_MEMSTART 0
-#define PPC_PGSTART 0
#define PPC_MEMOFFSET PAGE_OFFSET
-#else
-extern unsigned long ppc_memstart;
-extern unsigned long ppc_pgstart;
-extern unsigned long ppc_memoffset;
-#define PPC_MEMSTART ppc_memstart
-#define PPC_PGSTART ppc_pgstart
-#define PPC_MEMOFFSET ppc_memoffset
-#endif
-
-#if defined(CONFIG_APUS) && !defined(MODULE)
-/* map phys->virtual and virtual->phys for RAM pages */
-static inline unsigned long ___pa(unsigned long v)
-{
- unsigned long p;
- asm volatile ("1: addis %0, %1, %2;"
- ".section \".vtop_fixup\",\"aw\";"
- ".align 1;"
- ".long 1b;"
- ".previous;"
- : "=r" (p)
- : "b" (v), "K" (((-PAGE_OFFSET) >> 16) & 0xffff));
- return p;
-}
-static inline void* ___va(unsigned long p)
-{
- unsigned long v;
- asm volatile ("1: addis %0, %1, %2;"
- ".section \".ptov_fixup\",\"aw\";"
- ".align 1;"
- ".long 1b;"
- ".previous;"
- : "=r" (v)
- : "b" (p), "K" (((PAGE_OFFSET) >> 16) & 0xffff));
-
- return (void*) v;
-}
-#else
#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
-#endif
extern int page_is_ram(unsigned long pfn);
#define __pa(x) ___pa((unsigned long)(x))
#define __va(x) ((void *)(___va((unsigned long)(x))))
-#define ARCH_PFN_OFFSET (PPC_PGSTART)
+#define ARCH_PFN_OFFSET 0
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
-#define pfn_valid(pfn) (((pfn) - PPC_PGSTART) < max_mapnr)
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
/* Pure 2^n version of get_order */
--- linux-2.6.22-rc6-mm1/include/asm-ppc/pgtable.h.old 2007-06-30 01:22:25.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-ppc/pgtable.h 2007-06-30 01:58:12.000000000 +0200
@@ -772,14 +772,6 @@ extern void paging_init(void);
#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk (unsigned long addr, int len);
-extern unsigned long iopa(unsigned long addr);
-extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
-
/* Values for nocacheflag and cmode */
/* These are not used by the APUS kernel_map, but prevents
compilation errors. */
--- linux-2.6.22-rc6-mm1/include/asm-m68k/pgtable.h.old 2007-06-30 01:23:33.000000000 +0200
+++ linux-2.6.22-rc6-mm1/include/asm-m68k/pgtable.h 2007-06-30 01:23:43.000000000 +0200
@@ -107,8 +107,6 @@ extern void *empty_zero_page;
/* 64-bit machines, beware! SRB. */
#define SIZEOF_PTR_LOG2 2
-#define mm_end_of_chunk(addr, len) 0
-
extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
/*
--- linux-2.6.22-rc6-mm1/drivers/scsi/a2091.c.old 2007-06-30 01:23:53.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/scsi/a2091.c 2007-06-30 01:24:08.000000000 +0200
@@ -46,8 +46,7 @@ static int dma_setup(struct scsi_cmnd *c
struct Scsi_Host *instance = cmd->device->host;
/* don't allow DMA if the physical address is bad */
- if (addr & A2091_XFER_MASK ||
- (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+ if (addr & A2091_XFER_MASK)
{
HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;
--- linux-2.6.22-rc6-mm1/drivers/scsi/a3000.c.old 2007-06-30 01:24:17.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/scsi/a3000.c 2007-06-30 01:24:26.000000000 +0200
@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *c
* end of a physical memory chunk, then allocate a bounce
* buffer
*/
- if (addr & A3000_XFER_MASK ||
- (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+ if (addr & A3000_XFER_MASK)
{
HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;
--- linux-2.6.22-rc6-mm1/drivers/scsi/gvp11.c.old 2007-06-30 01:24:35.000000000 +0200
+++ linux-2.6.22-rc6-mm1/drivers/scsi/gvp11.c 2007-06-30 01:24:46.000000000 +0200
@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *c
static int scsi_alloc_out_of_range = 0;
/* use bounce buffer if the physical address is bad */
- if (addr & HDATA(cmd->device->host)->dma_xfer_mask ||
- (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+ if (addr & HDATA(cmd->device->host)->dma_xfer_mask)
{
HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;
--- linux-2.6.22-rc6-mm1/sound/oss/dmasound/dmasound_paula.c.old 2007-06-30 01:26:29.000000000 +0200
+++ linux-2.6.22-rc6-mm1/sound/oss/dmasound/dmasound_paula.c 2007-06-30 01:26:54.000000000 +0200
@@ -91,10 +91,6 @@ static irqreturn_t AmiInterrupt(int irq,
* power LED are controlled by the same line.
*/
-#ifdef CONFIG_APUS
-#define mach_heartbeat ppc_md.heartbeat
-#endif
-
static void (*saved_heartbeat)(int) = NULL;
static inline void disable_heartbeat(void)
--- linux-2.6.22-rc6-mm1/arch/powerpc/kernel/setup_32.c.old 2007-06-30 01:49:26.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/powerpc/kernel/setup_32.c 2007-06-30 01:49:35.000000000 +0200
@@ -24,7 +24,6 @@
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
-#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
--- linux-2.6.22-rc6-mm1/arch/ppc/kernel/setup.c.old 2007-06-30 01:49:46.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/kernel/setup.c 2007-06-30 01:49:50.000000000 +0200
@@ -25,7 +25,6 @@
#include <asm/pgtable.h>
#include <asm/bootinfo.h>
#include <asm/setup.h>
-#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
--- linux-2.6.22-rc6-mm1/arch/ppc/kernel/ppc_ksyms.c.old 2007-06-30 01:55:00.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/kernel/ppc_ksyms.c 2007-06-30 01:55:10.000000000 +0200
@@ -60,6 +60,4 @@
long long __lshrdi3(long long, int);
-extern unsigned long mm_ptov (unsigned long paddr);
-
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
@@ -119,7 +117,6 @@ EXPORT_SYMBOL(_outsw_ns);
EXPORT_SYMBOL(_insl_ns);
EXPORT_SYMBOL(_outsl_ns);
EXPORT_SYMBOL(iopa);
-EXPORT_SYMBOL(mm_ptov);
EXPORT_SYMBOL(ioremap);
#ifdef CONFIG_44x
EXPORT_SYMBOL(ioremap64);
--- linux-2.6.22-rc6-mm1/arch/ppc/mm/pgtable.c.old 2007-06-30 01:55:21.000000000 +0200
+++ linux-2.6.22-rc6-mm1/arch/ppc/mm/pgtable.c 2007-06-30 01:55:31.000000000 +0200
@@ -426,41 +426,3 @@ unsigned long iopa(unsigned long addr)
return(pa);
}
-/* This is will find the virtual address for a physical one....
- * Swiped from APUS, could be dangerous :-).
- * This is only a placeholder until I really find a way to make this
- * work. -- Dan
- */
-unsigned long
-mm_ptov (unsigned long paddr)
-{
- unsigned long ret;
-#if 0
- if (paddr < 16*1024*1024)
- ret = ZTWO_VADDR(paddr);
- else {
- int i;
-
- for (i = 0; i < kmap_chunk_count;){
- unsigned long phys = kmap_chunks[i++];
- unsigned long size = kmap_chunks[i++];
- unsigned long virt = kmap_chunks[i++];
- if (paddr >= phys
- && paddr < (phys + size)){
- ret = virt + paddr - phys;
- goto exit;
- }
- }
-
- ret = (unsigned long) __va(paddr);
- }
-exit:
-#ifdef DEBUGPV
- printk ("PTOV(%lx)=%lx\n", paddr, ret);
-#endif
-#else
- ret = (unsigned long)paddr + KERNELBASE;
-#endif
- return ret;
-}
-
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/amiga_ksyms.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1 +0,0 @@
-#include "../../m68k/amiga/amiga_ksyms.c"
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/chipram.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1 +0,0 @@
-#include "../../m68k/amiga/chipram.c"
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/Makefile 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,8 +0,0 @@
-#
-# Makefile for Linux arch/m68k/amiga source directory
-#
-
-obj-y := config.o amiints.o cia.o time.o bootinfo.o amisound.o \
- chipram.o amiga_ksyms.o
-
-obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/amiints.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,322 +0,0 @@
-/*
- * Amiga Linux interrupt handling code
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- * this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- * be careful that dev_id for this sources is unique since this the
- * only possibility to distinguish between different handlers for
- * free_irq. irq lists also have different irq flags:
- * - IRQ_FLG_FAST: handler is inserted at top of list (after other
- * fast handlers)
- * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- * they're executed irq level is set to the previous
- * one, but handlers don't need to be reentrant, if
- * reentrance occurred, slow handlers will be just
- * called again.
- * The whole interrupt handling for CIAs is moved to cia.c
- * /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- * interrupts, normal and fast handlers, fast handlers being
- * marked with SA_INTERRUPT and runs with all other interrupts
- * disabled. Normal interrupts disable their own source but
- * run with all other interrupt sources enabled.
- * PORTS and EXTER interrupts are always shared even if the
- * drivers do not explicitly mark this when calling
- * request_irq which they really should do.
- * This is similar to the way interrupts are handled on all
- * other architectures and makes a ton of sense besides
- * having the advantage of making it easier to share
- * drivers.
- * /Jes
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amipcmcia.h>
-
-#ifdef CONFIG_APUS
-#include <asm/amigappc.h>
-#endif
-
-extern void cia_init_IRQ(struct ciabase *base);
-
-unsigned short ami_intena_vals[AMI_STD_IRQS] = {
- IF_VERTB, IF_COPER, IF_AUD0, IF_AUD1, IF_AUD2, IF_AUD3, IF_BLIT,
- IF_DSKSYN, IF_DSKBLK, IF_RBF, IF_TBE, IF_SOFT, IF_PORTS, IF_EXTER
-};
-static const unsigned char ami_servers[AMI_STD_IRQS] = {
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1
-};
-
-static short ami_ablecount[AMI_IRQS];
-
-static void ami_badint(int irq, void *dev_id, struct pt_regs *fp)
-{
-/* num_spurious += 1;*/
-}
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters: None
- *
- * Returns: Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-__init
-void amiga_init_IRQ(void)
-{
- int i;
-
- for (i = 0; i < AMI_IRQS; i++)
- ami_ablecount[i] = 0;
-
- /* turn off PCMCIA interrupts */
- if (AMIGAHW_PRESENT(PCMCIA))
- gayle.inten = GAYLE_IRQ_IDE;
-
- /* turn off all interrupts... */
- amiga_custom.intena = 0x7fff;
- amiga_custom.intreq = 0x7fff;
-
-#ifdef CONFIG_APUS
- /* Clear any inter-CPU interrupt requests. Circumvents bug in
- Blizzard IPL emulation HW (or so it appears). */
- APUS_WRITE(APUS_INT_LVL, INTLVL_SETRESET | INTLVL_MASK);
-
- /* Init IPL emulation. */
- APUS_WRITE(APUS_REG_INT, REGINT_INTMASTER | REGINT_ENABLEIPL);
- APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT);
- APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK);
-#endif
- /* ... and enable the master interrupt bit */
- amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
- cia_init_IRQ(&ciaa_base);
- cia_init_IRQ(&ciab_base);
-}
-
-/*
- * Enable/disable a particular machine specific interrupt source.
- * Note that this may affect other interrupts in case of a shared interrupt.
- * This function should only be called for a _very_ short time to change some
- * internal data, that may not be changed by the interrupt at the same time.
- * ami_(enable|disable)_irq calls may also be nested.
- */
-
-void amiga_enable_irq(unsigned int irq)
-{
- if (irq >= AMI_IRQS) {
- printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
- return;
- }
-
- ami_ablecount[irq]--;
- if (ami_ablecount[irq]<0)
- ami_ablecount[irq]=0;
- else if (ami_ablecount[irq])
- return;
-
- /* No action for auto-vector interrupts */
- if (irq >= IRQ_AMIGA_AUTO){
- printk("%s: Trying to enable auto-vector IRQ %i\n",
- __FUNCTION__, irq - IRQ_AMIGA_AUTO);
- return;
- }
-
- if (irq >= IRQ_AMIGA_CIAA) {
- cia_set_irq(irq, 0);
- cia_able_irq(irq, 1);
- return;
- }
-
- /* enable the interrupt */
- amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq];
-}
-
-void amiga_disable_irq(unsigned int irq)
-{
- if (irq >= AMI_IRQS) {
- printk("%s: Unknown IRQ %d\n", __FUNCTION__, irq);
- return;
- }
-
- if (ami_ablecount[irq]++)
- return;
-
- /* No action for auto-vector interrupts */
- if (irq >= IRQ_AMIGA_AUTO) {
- printk("%s: Trying to disable auto-vector IRQ %i\n",
- __FUNCTION__, irq - IRQ_AMIGA_AUTO);
- return;
- }
-
- if (irq >= IRQ_AMIGA_CIAA) {
- cia_able_irq(irq, 0);
- return;
- }
-
- /* disable the interrupt */
- amiga_custom.intena = ami_intena_vals[irq];
-}
-
-inline void amiga_do_irq(int irq, struct pt_regs *fp)
-{
- irq_desc_t *desc = irq_desc + irq;
- struct irqaction *action = desc->action;
-
- kstat_cpu(0).irqs[irq]++;
- action->handler(irq, action->dev_id, fp);
-}
-
-void amiga_do_irq_list(int irq, struct pt_regs *fp)
-{
- irq_desc_t *desc = irq_desc + irq;
- struct irqaction *action;
-
- kstat_cpu(0).irqs[irq]++;
-
- amiga_custom.intreq = ami_intena_vals[irq];
-
- for (action = desc->action; action; action = action->next)
- action->handler(irq, action->dev_id, fp);
-}
-
-/*
- * The builtin Amiga hardware interrupt handlers.
- */
-
-static void ami_int1(int irq, void *dev_id, struct pt_regs *fp)
-{
- unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
- /* if serial transmit buffer empty, interrupt */
- if (ints & IF_TBE) {
- amiga_custom.intreq = IF_TBE;
- amiga_do_irq(IRQ_AMIGA_TBE, fp);
- }
-
- /* if floppy disk transfer complete, interrupt */
- if (ints & IF_DSKBLK) {
- amiga_custom.intreq = IF_DSKBLK;
- amiga_do_irq(IRQ_AMIGA_DSKBLK, fp);
- }
-
- /* if software interrupt set, interrupt */
- if (ints & IF_SOFT) {
- amiga_custom.intreq = IF_SOFT;
- amiga_do_irq(IRQ_AMIGA_SOFT, fp);
- }
-}
-
-static void ami_int3(int irq, void *dev_id, struct pt_regs *fp)
-{
- unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
- /* if a blitter interrupt */
- if (ints & IF_BLIT) {
- amiga_custom.intreq = IF_BLIT;
- amiga_do_irq(IRQ_AMIGA_BLIT, fp);
- }
-
- /* if a copper interrupt */
- if (ints & IF_COPER) {
- amiga_custom.intreq = IF_COPER;
- amiga_do_irq(IRQ_AMIGA_COPPER, fp);
- }
-
- /* if a vertical blank interrupt */
- if (ints & IF_VERTB)
- amiga_do_irq_list(IRQ_AMIGA_VERTB, fp);
-}
-
-static void ami_int4(int irq, void *dev_id, struct pt_regs *fp)
-{
- unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
- /* if audio 0 interrupt */
- if (ints & IF_AUD0) {
- amiga_custom.intreq = IF_AUD0;
- amiga_do_irq(IRQ_AMIGA_AUD0, fp);
- }
-
- /* if audio 1 interrupt */
- if (ints & IF_AUD1) {
- amiga_custom.intreq = IF_AUD1;
- amiga_do_irq(IRQ_AMIGA_AUD1, fp);
- }
-
- /* if audio 2 interrupt */
- if (ints & IF_AUD2) {
- amiga_custom.intreq = IF_AUD2;
- amiga_do_irq(IRQ_AMIGA_AUD2, fp);
- }
-
- /* if audio 3 interrupt */
- if (ints & IF_AUD3) {
- amiga_custom.intreq = IF_AUD3;
- amiga_do_irq(IRQ_AMIGA_AUD3, fp);
- }
-}
-
-static void ami_int5(int irq, void *dev_id, struct pt_regs *fp)
-{
- unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
- /* if serial receive buffer full interrupt */
- if (ints & IF_RBF) {
- /* acknowledge of IF_RBF must be done by the serial interrupt */
- amiga_do_irq(IRQ_AMIGA_RBF, fp);
- }
-
- /* if a disk sync interrupt */
- if (ints & IF_DSKSYN) {
- amiga_custom.intreq = IF_DSKSYN;
- amiga_do_irq(IRQ_AMIGA_DSKSYN, fp);
- }
-}
-
-static void ami_int7(int irq, void *dev_id, struct pt_regs *fp)
-{
- panic ("level 7 interrupt received\n");
-}
-
-#ifdef CONFIG_APUS
-/* The PPC irq handling links all handlers requested on the same vector
- and executes them in a loop. Having ami_badint at the end of the chain
- is a bad idea. */
-struct irqaction amiga_sys_irqaction[AUTO_IRQS] = {
- { .handler = ami_badint, .name = "spurious int" },
- { .handler = ami_int1, .name = "int1 handler" },
- { 0, /* CIAA */ },
- { .handler = ami_int3, .name = "int3 handler" },
- { .handler = ami_int4, .name = "int4 handler" },
- { .handler = ami_int5, .name = "int5 handler" },
- { 0, /* CIAB */ },
- { .handler = ami_int7, .name = "int7 handler" },
-};
-#else
-void (*amiga_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = {
- ami_badint, ami_int1, ami_badint, ami_int3,
- ami_int4, ami_int5, ami_badint, ami_int7
-};
-#endif
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/cia.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,176 +0,0 @@
-/*
- * Copyright (C) 1996 Roman Zippel
- *
- * The concept of some functions bases on the original Amiga OS function
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-
-struct ciabase {
- volatile struct CIA *cia;
- u_char icr_mask, icr_data;
- u_short int_mask;
- int handler_irq, cia_irq, server_irq;
- char *name;
-} ciaa_base = {
- &ciaa, 0, 0, IF_PORTS,
- IRQ_AMIGA_AUTO_2, IRQ_AMIGA_CIAA,
- IRQ_AMIGA_PORTS,
- "CIAA handler"
-}, ciab_base = {
- &ciab, 0, 0, IF_EXTER,
- IRQ_AMIGA_AUTO_6, IRQ_AMIGA_CIAB,
- IRQ_AMIGA_EXTER,
- "CIAB handler"
-};
-
-#define CIA_SET_BASE_ADJUST_IRQ(base, irq) \
-do { \
- if (irq >= IRQ_AMIGA_CIAB) { \
- base = &ciab_base; \
- irq -= IRQ_AMIGA_CIAB; \
- } else { \
- base = &ciaa_base; \
- irq -= IRQ_AMIGA_CIAA; \
- } \
-} while (0)
-
-/*
- * Cause or clear CIA interrupts, return old interrupt status.
- */
-
-static unsigned char cia_set_irq_private(struct ciabase *base,
- unsigned char mask)
-{
- u_char old;
-
- old = (base->icr_data |= base->cia->icr);
- if (mask & CIA_ICR_SETCLR)
- base->icr_data |= mask;
- else
- base->icr_data &= ~mask;
- if (base->icr_data & base->icr_mask)
- amiga_custom.intreq = IF_SETCLR | base->int_mask;
- return old & base->icr_mask;
-}
-
-unsigned char cia_set_irq(unsigned int irq, int set)
-{
- struct ciabase *base;
- unsigned char mask;
-
- if (irq >= IRQ_AMIGA_CIAB)
- mask = (1 << (irq - IRQ_AMIGA_CIAB));
- else
- mask = (1 << (irq - IRQ_AMIGA_CIAA));
- mask |= (set) ? CIA_ICR_SETCLR : 0;
-
- CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
- return cia_set_irq_private(base, mask);
-}
-
-unsigned char cia_get_irq_mask(unsigned int irq)
-{
- struct ciabase *base;
-
- CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
- return base->cia->icr;
-}
-
-/*
- * Enable or disable CIA interrupts, return old interrupt mask.
- */
-
-static unsigned char cia_able_irq_private(struct ciabase *base,
- unsigned char mask)
-{
- u_char old;
-
- old = base->icr_mask;
- base->icr_data |= base->cia->icr;
- base->cia->icr = mask;
- if (mask & CIA_ICR_SETCLR)
- base->icr_mask |= mask;
- else
- base->icr_mask &= ~mask;
- base->icr_mask &= CIA_ICR_ALL;
-
- if (base->icr_data & base->icr_mask)
- amiga_custom.intreq = IF_SETCLR | base->int_mask;
- return old;
-}
-
-unsigned char cia_able_irq(unsigned int irq, int enable)
-{
- struct ciabase *base;
- unsigned char mask;
-
- if (irq >= IRQ_AMIGA_CIAB)
- mask = (1 << (irq - IRQ_AMIGA_CIAB));
- else
- mask = (1 << (irq - IRQ_AMIGA_CIAA));
- mask |= (enable) ? CIA_ICR_SETCLR : 0;
-
- CIA_SET_BASE_ADJUST_IRQ(base, irq);
-
- return cia_able_irq_private(base, mask);
-}
-
-static void cia_handler(int irq, void *dev_id, struct pt_regs *fp)
-{
- struct ciabase *base = (struct ciabase *)dev_id;
- irq_desc_t *desc;
- struct irqaction *action;
- int i;
- unsigned char ints;
-
- irq = base->cia_irq;
- desc = irq_desc + irq;
- ints = cia_set_irq_private(base, CIA_ICR_ALL);
- amiga_custom.intreq = base->int_mask;
- for (i = 0; i < CIA_IRQS; i++, irq++) {
- if (ints & 1) {
- kstat_cpu(0).irqs[irq]++;
- action = desc->action;
- action->handler(irq, action->dev_id, fp);
- }
- ints >>= 1;
- desc++;
- }
- amiga_do_irq_list(base->server_irq, fp);
-}
-
-void __init cia_init_IRQ(struct ciabase *base)
-{
- extern struct irqaction amiga_sys_irqaction[AUTO_IRQS];
- struct irqaction *action;
-
- /* clear any pending interrupt and turn off all interrupts */
- cia_set_irq_private(base, CIA_ICR_ALL);
- cia_able_irq_private(base, CIA_ICR_ALL);
-
- /* install CIA handler */
- action = &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO];
- action->handler = cia_handler;
- action->dev_id = base;
- action->name = base->name;
- setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]);
-
- amiga_custom.intena = IF_SETCLR | base->int_mask;
-}
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/pcmcia.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1 +0,0 @@
-#include "../../m68k/amiga/pcmcia.c"
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/amisound.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1 +0,0 @@
-#include "../../m68k/amiga/amisound.c"
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/time.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,57 +0,0 @@
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-
-#include <linux/timex.h>
-
-unsigned long m68k_get_rtc_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- extern void arch_gettod(int *year, int *mon, int *day, int *hour,
- int *min, int *sec);
-
- arch_gettod (&year, &mon, &day, &hour, &min, &sec);
-
- if ((year += 1900) < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-int m68k_set_rtc_time(unsigned long nowtime)
-{
- if (mach_set_clock_mmss)
- return mach_set_clock_mmss (nowtime);
- return -1;
-}
-
-void apus_heartbeat (void)
-{
-#ifdef CONFIG_HEARTBEAT
- static unsigned cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist)
- mach_heartbeat( 1 );
- else if (cnt == 7 || cnt == dist+7)
- mach_heartbeat( 0 );
-
- if (++cnt > period) {
- cnt = 0;
- /* The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51,
- * f(inf)->30. */
- period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
- dist = period / 4;
- }
-#endif
- /* should be made smarter */
- ppc_md.heartbeat_count = 1;
-}
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/bootinfo.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,78 +0,0 @@
-/*
- * Extracted from arch/m68k/kernel/setup.c.
- * Should be properly generalized and put somewhere else.
- * Jesper
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-
-extern char cmd_line[CL_SIZE];
-
-extern int num_memory;
-extern int m68k_realnum_memory;
-extern struct mem_info memory[NUM_MEMINFO];
-extern struct mem_info m68k_memory[NUM_MEMINFO];
-extern struct mem_info ramdisk;
-
-extern int amiga_parse_bootinfo(const struct bi_record *);
-extern int atari_parse_bootinfo(const struct bi_record *);
-extern int mac_parse_bootinfo(const struct bi_record *);
-
-void __init parse_bootinfo(const struct bi_record *record)
-{
- while (record->tag != BI_LAST) {
- int unknown = 0;
- const u_long *data = record->data;
- switch (record->tag) {
- case BI_MACHTYPE:
- case BI_CPUTYPE:
- case BI_FPUTYPE:
- case BI_MMUTYPE:
- /* Already set up by head.S */
- break;
-
- case BI_MEMCHUNK:
- if (num_memory < NUM_MEMINFO) {
- memory[num_memory].addr = data[0];
- memory[num_memory].size = data[1];
- num_memory++;
-
- /* FIXME: duplicate for m68k drivers. */
- m68k_memory[m68k_realnum_memory].addr = data[0];
- m68k_memory[m68k_realnum_memory].size = data[1];
- m68k_realnum_memory++;
- } else
- printk("parse_bootinfo: too many memory chunks\n");
- break;
-
- case BI_RAMDISK:
- ramdisk.addr = data[0];
- ramdisk.size = data[1];
- break;
-
- case BI_COMMAND_LINE:
- strlcpy(cmd_line, (const char *)data, sizeof(cmd_line));
- break;
-
- default:
- if (MACH_IS_AMIGA)
- unknown = amiga_parse_bootinfo(record);
- else if (MACH_IS_ATARI)
- unknown = atari_parse_bootinfo(record);
- else if (MACH_IS_MAC)
- unknown = mac_parse_bootinfo(record);
- else
- unknown = 1;
- }
- if (unknown)
- printk("parse_bootinfo: unknown tag 0x%04x ignored\n",
- record->tag);
- record = (struct bi_record *)((u_long)record+record->size);
- }
-}
--- linux-2.6.22-rc6-mm1/arch/ppc/amiga/ints.c 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,158 +0,0 @@
-/*
- * Linux/m68k general interrupt handling code from arch/m68k/kernel/ints.c
- * Needed to drive the m68k emulating IRQ hardware on the PowerUp boards.
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-/* table for system interrupt handlers */
-static irq_handler_t irq_list[SYS_IRQS];
-
-static const char *default_names[SYS_IRQS] = {
- "spurious int", "int1 handler", "int2 handler", "int3 handler",
- "int4 handler", "int5 handler", "int6 handler", "int7 handler"
-};
-
-/* The number of spurious interrupts */
-volatile unsigned int num_spurious;
-
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
-
-/*
- * void init_IRQ(void)
- *
- * Parameters: None
- *
- * Returns: Nothing
- *
- * This function should be called during kernel startup to initialize
- * the IRQ handling routines.
- */
-
-__init
-void m68k_init_IRQ(void)
-{
- int i;
-
- for (i = 0; i < SYS_IRQS; i++) {
- if (mach_default_handler)
- irq_list[i].handler = (*mach_default_handler)[i];
- irq_list[i].flags = 0;
- irq_list[i].dev_id = NULL;
- irq_list[i].devname = default_names[i];
- }
-
- for (i = 0; i < NUM_IRQ_NODES; i++)
- nodes[i].handler = NULL;
-
- mach_init_IRQ ();
-}
-
-irq_node_t *new_irq_node(void)
-{
- irq_node_t *node;
- short i;
-
- for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--)
- if (!node->handler)
- return node;
-
- printk ("new_irq_node: out of nodes\n");
- return NULL;
-}
-
-int sys_request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long flags, const char *devname, void *dev_id)
-{
- if (irq < IRQ1 || irq > IRQ7) {
- printk("%s: Incorrect IRQ %d from %s\n",
- __FUNCTION__, irq, devname);
- return -ENXIO;
- }
-
-#if 0
- if (!(irq_list[irq].flags & IRQ_FLG_STD)) {
- if (irq_list[irq].flags & IRQ_FLG_LOCK) {
- printk("%s: IRQ %d from %s is not replaceable\n",
- __FUNCTION__, irq, irq_list[irq].devname);
- return -EBUSY;
- }
- if (!(flags & IRQ_FLG_REPLACE)) {
- printk("%s: %s can't replace IRQ %d from %s\n",
- __FUNCTION__, devname, irq, irq_list[irq].devname);
- return -EBUSY;
- }
- }
-#endif
-
- irq_list[irq].handler = handler;
- irq_list[irq].flags = flags;
- irq_list[irq].dev_id = dev_id;
- irq_list[irq].devname = devname;
- return 0;
-}
-
-void sys_free_irq(unsigned int irq, void *dev_id)
-{
- if (irq < IRQ1 || irq > IRQ7) {
- printk("%s: Incorrect IRQ %d\n", __FUNCTION__, irq);
- return;
- }
-
- if (irq_list[irq].dev_id != dev_id)
- printk("%s: Removing probably wrong IRQ %d from %s\n",
- __FUNCTION__, irq, irq_list[irq].devname);
-
- irq_list[irq].handler = (*mach_default_handler)[irq];
- irq_list[irq].flags = 0;
- irq_list[irq].dev_id = NULL;
- irq_list[irq].devname = default_names[irq];
-}
-
-asmlinkage void process_int(unsigned long vec, struct pt_regs *fp)
-{
- if (vec >= VEC_INT1 && vec <= VEC_INT7 && !MACH_IS_BVME6000) {
- vec -= VEC_SPUR;
- kstat_cpu(0).irqs[vec]++;
- irq_list[vec].handler(vec, irq_list[vec].dev_id, fp);
- } else {
- if (mach_process_int)
- mach_process_int(vec, fp);
- else
- panic("Can't process interrupt vector %ld\n", vec);
- return;
- }
-}
-
-int m68k_get_irq_list(struct seq_file *p, void *v)
-{
- int i;
-
- /* autovector interrupts */
- if (mach_default_handler) {
- for (i = 0; i < SYS_IRQS; i++) {
- seq_printf(p, "auto %2d: %10u ", i,
- i ? kstat_cpu(0).irqs[i] : num_spurious);
- seq_puts(p, " ");
- seq_printf(p, "%s\n", irq_list[i].devname);
- }
- }
-
- mach_get_irq_list(p, v);
- return 0;
-}
--- linux-2.6.22-rc6-mm1/arch/ppc/configs/apus_defconfig 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,920 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_EMBEDDED is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_8260 is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_APUS=y
-# CONFIG_WILLOW_2 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_PERMEDIA=y
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_AMIGA=m
-# CONFIG_PARPORT_MFC3 is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_AMIGA=y
-CONFIG_ZORRO=y
-CONFIG_ABSTRACT_CONSOLE=y
-CONFIG_APUS_FAST_EXCEPT=y
-CONFIG_AMIGA_PCMCIA=y
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_GVPIOEXT=y
-CONFIG_GVPIOEXT_LP=m
-CONFIG_GVPIOEXT_PLIP=m
-CONFIG_MULTIFACE_III_TTY=y
-CONFIG_A2232=y
-CONFIG_WHIPPET_SERIAL=y
-CONFIG_APNE=y
-CONFIG_HEARTBEAT=y
-CONFIG_PROC_HARDWARE=y
-CONFIG_ZORRO_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_AMIGA_FLOPPY=y
-CONFIG_AMIGA_Z2RAM=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID5=m
-# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_DM=m
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_IDEPCI is not set
-CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
-CONFIG_BLK_DEV_BUDDHA=y
-
-#
-# SCSI support
-#
-CONFIG_SCSI=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A4000T_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_A4091_SCSI=y
-CONFIG_WARPENGINE_SCSI=y
-CONFIG_BLZ603EPLUS_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-CONFIG_ARIADNE=y
-# CONFIG_ZORRO8390 is not set
-CONFIG_A2065=y
-CONFIG_HYDRA=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PLIP=m
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPPOE=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_PM2=y
-# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
-# CONFIG_FB_PM2_PCI is not set
-CONFIG_FB_PM2_CVPPC=y
-CONFIG_FB_CYBER2000=y
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-CONFIG_FB_CYBER=y
-CONFIG_FB_VIRGE=y
-CONFIG_FB_RETINAZ3=y
-CONFIG_FB_FM2=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_AMIGA=m
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_AMIGA=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-CONFIG_BUSMOUSE=y
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
-CONFIG_HFS_FS=y
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-CONFIG_CODA_FS=m
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SMB_NLS=y
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-CONFIG_DMASOUND_PAULA=m
-CONFIG_DMASOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-CONFIG_SOUND_VMIDI=m
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
--- linux-2.6.22-rc6-mm1/arch/ppc/platforms/apus_pci.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,34 +0,0 @@
-/*
- * Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer
- * driver.
- *
- * Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@...UniBO.IT)
- * --------------------------------------------------------------------------
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file README.legal in the main directory of this archive
- * for more details.
- */
-
-#ifndef APUS_PCI_H
-#define APUS_PCI_H
-
-
-#define CSPPC_PCI_BRIDGE 0xfffe0000
-#define CSPPC_BRIDGE_ENDIAN 0x0000
-#define CSPPC_BRIDGE_INT 0x0010
-
-#define CVPPC_PCI_CONFIG 0xfffc0000
-#define CVPPC_ROM_ADDRESS 0xe2000001
-#define CVPPC_REGS_REGION 0xef000000
-#define CVPPC_FB_APERTURE_ONE 0xe0000000
-#define CVPPC_FB_APERTURE_TWO 0xe1000000
-#define CVPPC_FB_SIZE 0x00800000
-
-/* CVPPC_BRIDGE_ENDIAN */
-#define CSPPCF_BRIDGE_BIG_ENDIAN 0x02
-
-/* CVPPC_BRIDGE_INT */
-#define CSPPCF_BRIDGE_ACTIVE_INT2 0x01
-
-
-#endif /* APUS_PCI_H */
--- linux-2.6.22-rc6-mm1/include/asm-ppc/amigahw.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,16 +0,0 @@
-#ifdef __KERNEL__
-#ifndef __ASMPPC_AMIGAHW_H
-#define __ASMPPC_AMIGAHW_H
-
-#include <asm-m68k/amigahw.h>
-
-#undef CHIP_PHYSADDR
-#ifdef CONFIG_APUS_FAST_EXCEPT
-#define CHIP_PHYSADDR (0x000000)
-#else
-#define CHIP_PHYSADDR (0x004000)
-#endif
-
-
-#endif /* __ASMPPC_AMIGAHW_H */
-#endif /* __KERNEL__ */
--- linux-2.6.22-rc6-mm1/include/asm-ppc/amigaints.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,133 +0,0 @@
-/*
-** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 10/2/92 by Greg Harp
-*/
-
-#ifdef __KERNEL__
-#ifndef _ASMm68k_AMIGAINTS_H_
-#define _ASMm68k_AMIGAINTS_H_
-
-/*
-** Amiga Interrupt sources.
-**
-*/
-
-#define AUTO_IRQS (8)
-#define AMI_STD_IRQS (14)
-#define CIA_IRQS (5)
-#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
-
-/* vertical blanking interrupt */
-#define IRQ_AMIGA_VERTB 0
-
-/* copper interrupt */
-#define IRQ_AMIGA_COPPER 1
-
-/* Audio interrupts */
-#define IRQ_AMIGA_AUD0 2
-#define IRQ_AMIGA_AUD1 3
-#define IRQ_AMIGA_AUD2 4
-#define IRQ_AMIGA_AUD3 5
-
-/* Blitter done interrupt */
-#define IRQ_AMIGA_BLIT 6
-
-/* floppy disk interrupts */
-#define IRQ_AMIGA_DSKSYN 7
-#define IRQ_AMIGA_DSKBLK 8
-
-/* builtin serial port interrupts */
-#define IRQ_AMIGA_RBF 9
-#define IRQ_AMIGA_TBE 10
-
-/* software interrupts */
-#define IRQ_AMIGA_SOFT 11
-
-/* interrupts from external hardware */
-#define IRQ_AMIGA_PORTS 12
-#define IRQ_AMIGA_EXTER 13
-
-/* CIA interrupt sources */
-#define IRQ_AMIGA_CIAA 14
-#define IRQ_AMIGA_CIAA_TA 14
-#define IRQ_AMIGA_CIAA_TB 15
-#define IRQ_AMIGA_CIAA_ALRM 16
-#define IRQ_AMIGA_CIAA_SP 17
-#define IRQ_AMIGA_CIAA_FLG 18
-#define IRQ_AMIGA_CIAB 19
-#define IRQ_AMIGA_CIAB_TA 19
-#define IRQ_AMIGA_CIAB_TB 20
-#define IRQ_AMIGA_CIAB_ALRM 21
-#define IRQ_AMIGA_CIAB_SP 22
-#define IRQ_AMIGA_CIAB_FLG 23
-
-/* auto-vector interrupts */
-#define IRQ_AMIGA_AUTO 24
-#define IRQ_AMIGA_AUTO_0 24 /* This is just a dummy */
-#define IRQ_AMIGA_AUTO_1 25
-#define IRQ_AMIGA_AUTO_2 26
-#define IRQ_AMIGA_AUTO_3 27
-#define IRQ_AMIGA_AUTO_4 28
-#define IRQ_AMIGA_AUTO_5 29
-#define IRQ_AMIGA_AUTO_6 30
-#define IRQ_AMIGA_AUTO_7 31
-
-#define IRQ_FLOPPY IRQ_AMIGA_DSKBLK
-
-/* INTREQR masks */
-#define IRQ1_MASK 0x0007 /* INTREQR mask for IRQ 1 */
-#define IRQ2_MASK 0x0008 /* INTREQR mask for IRQ 2 */
-#define IRQ3_MASK 0x0070 /* INTREQR mask for IRQ 3 */
-#define IRQ4_MASK 0x0780 /* INTREQR mask for IRQ 4 */
-#define IRQ5_MASK 0x1800 /* INTREQR mask for IRQ 5 */
-#define IRQ6_MASK 0x2000 /* INTREQR mask for IRQ 6 */
-#define IRQ7_MASK 0x4000 /* INTREQR mask for IRQ 7 */
-
-#define IF_SETCLR 0x8000 /* set/clr bit */
-#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */
-#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */
-#define IF_DSKSYN 0x1000 /* disk sync interrupt */
-#define IF_RBF 0x0800 /* serial receive buffer full interrupt */
-#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */
-#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */
-#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */
-#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */
-#define IF_BLIT 0x0040 /* blitter done interrupt */
-#define IF_VERTB 0x0020 /* vertical blanking interrupt */
-#define IF_COPER 0x0010 /* copper interrupt */
-#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */
-#define IF_SOFT 0x0004 /* software initiated interrupt */
-#define IF_DSKBLK 0x0002 /* diskblock DMA finished */
-#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */
-
-extern void amiga_do_irq(int irq, struct pt_regs *fp);
-extern void amiga_do_irq_list(int irq, struct pt_regs *fp);
-
-/* CIA interrupt control register bits */
-
-#define CIA_ICR_TA 0x01
-#define CIA_ICR_TB 0x02
-#define CIA_ICR_ALRM 0x04
-#define CIA_ICR_SP 0x08
-#define CIA_ICR_FLG 0x10
-#define CIA_ICR_ALL 0x1f
-#define CIA_ICR_SETCLR 0x80
-
-/* to access the interrupt control registers of CIA's use only
-** these functions, they behave exactly like the amiga os routines
-*/
-
-extern struct ciabase ciaa_base, ciab_base;
-
-extern unsigned char cia_set_irq(unsigned int irq, int set);
-extern unsigned char cia_able_irq(unsigned int irq, int enable);
-
-#endif /* asm-m68k/amigaints.h */
-#endif /* __KERNEL__ */
--- linux-2.6.22-rc6-mm1/include/asm-ppc/amigappc.h 2007-04-26 05:08:32.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,85 +0,0 @@
-/*
-** asm-ppc/amigappc.h -- This header defines some values and pointers for
-** the Phase 5 PowerUp card.
-**
-** Copyright 1997, 1998 by Phase5, Germany.
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created: 7/22/97 by Jesper Skov
-*/
-
-#ifdef __KERNEL__
-#ifndef _M68K_AMIGAPPC_H
-#define _M68K_AMIGAPPC_H
-
-#ifndef __ASSEMBLY__
-
-/* #include <asm/system.h> */
-#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-
-#define APUS_WRITE(_a_, _v_) \
-do { \
- (*((volatile unsigned char *)(_a_)) = (_v_)); \
- mb(); \
-} while (0)
-
-#define APUS_READ(_a_, _v_) \
-do { \
- (_v_) = (*((volatile unsigned char *)(_a_))); \
- mb(); \
-} while (0)
-#endif /* ndef __ASSEMBLY__ */
-
-/* Maybe add a [#ifdef WANT_ZTWOBASE] condition to amigahw.h? */
-#define zTwoBase (0x80000000)
-
-#define APUS_IPL_BASE (zTwoBase + 0x00f60000)
-#define APUS_REG_RESET (APUS_IPL_BASE + 0x00)
-#define APUS_REG_WAITSTATE (APUS_IPL_BASE + 0x10)
-#define APUS_REG_SHADOW (APUS_IPL_BASE + 0x18)
-#define APUS_REG_LOCK (APUS_IPL_BASE + 0x20)
-#define APUS_REG_INT (APUS_IPL_BASE + 0x28)
-#define APUS_IPL_EMU (APUS_IPL_BASE + 0x30)
-#define APUS_INT_LVL (APUS_IPL_BASE + 0x38)
-
-#define REGSHADOW_SETRESET (0x80)
-#define REGSHADOW_SELFRESET (0x40)
-
-#define REGLOCK_SETRESET (0x80)
-#define REGLOCK_BLACKMAGICK1 (0x40)
-#define REGLOCK_BLACKMAGICK2 (0x20)
-#define REGLOCK_BLACKMAGICK3 (0x10)
-
-#define REGWAITSTATE_SETRESET (0x80)
-#define REGWAITSTATE_PPCW (0x08)
-#define REGWAITSTATE_PPCR (0x04)
-
-#define REGRESET_SETRESET (0x80)
-#define REGRESET_PPCRESET (0x10)
-#define REGRESET_M68KRESET (0x08)
-#define REGRESET_AMIGARESET (0x04)
-#define REGRESET_AUXRESET (0x02)
-#define REGRESET_SCSIRESET (0x01)
-
-#define REGINT_SETRESET (0x80)
-#define REGINT_ENABLEIPL (0x02)
-#define REGINT_INTMASTER (0x01)
-
-#define IPLEMU_SETRESET (0x80)
-#define IPLEMU_DISABLEINT (0x40)
-#define IPLEMU_IPL2 (0x20)
-#define IPLEMU_IPL1 (0x10)
-#define IPLEMU_IPL0 (0x08)
-#define IPLEMU_PPCIPL2 (0x04)
-#define IPLEMU_PPCIPL1 (0x02)
-#define IPLEMU_PPCIPL0 (0x01)
-#define IPLEMU_IPLMASK (IPLEMU_PPCIPL2|IPLEMU_PPCIPL1|IPLEMU_PPCIPL0)
-
-#define INTLVL_SETRESET (0x80)
-#define INTLVL_MASK (0x7f)
-
-#endif /* _M68k_AMIGAPPC_H */
-#endif /* __KERNEL__ */
--- linux-2.6/arch/ppc/amiga/config.c 2006-06-30 19:23:06.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,953 +0,0 @@
-#define m68k_debug_device debug_device
-
-/*
- * Copyright (C) 1993 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Miscellaneous Amiga stuff
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#ifdef CONFIG_ZORRO
-#include <linux/zorro.h>
-#endif
-
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-
-unsigned long powerup_PCI_present;
-unsigned long powerup_BPPCPLUS_present;
-unsigned long amiga_model;
-unsigned long amiga_eclock;
-unsigned long amiga_masterclock;
-unsigned long amiga_colorclock;
-unsigned long amiga_chipset;
-unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
-struct amiga_hw_present amiga_hw_present;
-
-static char s_a500[] __initdata = "A500";
-static char s_a500p[] __initdata = "A500+";
-static char s_a600[] __initdata = "A600";
-static char s_a1000[] __initdata = "A1000";
-static char s_a1200[] __initdata = "A1200";
-static char s_a2000[] __initdata = "A2000";
-static char s_a2500[] __initdata = "A2500";
-static char s_a3000[] __initdata = "A3000";
-static char s_a3000t[] __initdata = "A3000T";
-static char s_a3000p[] __initdata = "A3000+";
-static char s_a4000[] __initdata = "A4000";
-static char s_a4000t[] __initdata = "A4000T";
-static char s_cdtv[] __initdata = "CDTV";
-static char s_cd32[] __initdata = "CD32";
-static char s_draco[] __initdata = "Draco";
-static char *amiga_models[] __initdata = {
- s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000,
- s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco,
-};
-
-static char amiga_model_name[13] = "Amiga ";
-
-extern char m68k_debug_device[];
-
-static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
-/* amiga specific irq functions */
-extern void amiga_init_IRQ (void);
-extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
-extern int amiga_request_irq (unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long flags, const char *devname,
- void *dev_id);
-extern void amiga_free_irq (unsigned int irq, void *dev_id);
-extern void amiga_enable_irq (unsigned int);
-extern void amiga_disable_irq (unsigned int);
-static void amiga_get_model(char *model);
-static int amiga_get_hardware_list(char *buffer);
-/* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset (void);
-static void a3000_gettod (int *, int *, int *, int *, int *, int *);
-static void a2000_gettod (int *, int *, int *, int *, int *, int *);
-static int amiga_hwclk (int, struct hwclk_time *);
-static int amiga_set_clock_mmss (unsigned long);
-static void amiga_reset (void);
-extern void amiga_init_sound(void);
-static void amiga_savekmsg_init(void);
-static void amiga_mem_console_write(struct console *co, const char *b,
- unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
- unsigned int count);
-static void amiga_debug_init(void);
-#ifdef CONFIG_HEARTBEAT
-static void amiga_heartbeat(int on);
-#endif
-
-static struct console amiga_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-
- /*
- * Motherboard Resources present in all Amiga models
- */
-
-static struct {
- struct resource _ciab, _ciaa, _custom, _kickstart;
-} mb_resources = {
-// { "Ranger Memory", 0x00c00000, 0x00c7ffff },
- ._ciab = { "CIA B", 0x00bfd000, 0x00bfdfff },
- ._ciaa = { "CIA A", 0x00bfe000, 0x00bfefff },
- ._custom = { "Custom I/O", 0x00dff000, 0x00dfffff },
- ._kickstart = { "Kickstart ROM", 0x00f80000, 0x00ffffff }
-};
-
-static struct resource rtc_resource = {
- NULL, 0x00dc0000, 0x00dcffff
-};
-
-static struct resource ram_resource[NUM_MEMINFO];
-
-
- /*
- * Parse an Amiga-specific record in the bootinfo
- */
-
-int amiga_parse_bootinfo(const struct bi_record *record)
-{
- int unknown = 0;
- const unsigned long *data = record->data;
-
- switch (record->tag) {
- case BI_AMIGA_MODEL:
- {
- unsigned long d = *data;
-
- powerup_PCI_present = d & 0x100;
- amiga_model = d & 0xff;
- }
- break;
-
- case BI_AMIGA_ECLOCK:
- amiga_eclock = *data;
- break;
-
- case BI_AMIGA_CHIPSET:
- amiga_chipset = *data;
- break;
-
- case BI_AMIGA_CHIP_SIZE:
- amiga_chip_size = *(const int *)data;
- break;
-
- case BI_AMIGA_VBLANK:
- amiga_vblank = *(const unsigned char *)data;
- break;
-
- case BI_AMIGA_PSFREQ:
- amiga_psfreq = *(const unsigned char *)data;
- break;
-
- case BI_AMIGA_AUTOCON:
-#ifdef CONFIG_ZORRO
- if (zorro_num_autocon < ZORRO_NUM_AUTO) {
- const struct ConfigDev *cd = (struct ConfigDev *)data;
- struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
- dev->rom = cd->cd_Rom;
- dev->slotaddr = cd->cd_SlotAddr;
- dev->slotsize = cd->cd_SlotSize;
- dev->resource.start = (unsigned long)cd->cd_BoardAddr;
- dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
- } else
- printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
-#endif /* CONFIG_ZORRO */
- break;
-
- case BI_AMIGA_SERPER:
- /* serial port period: ignored here */
- break;
-
- case BI_AMIGA_PUP_BRIDGE:
- powerup_PCI_present = *(const unsigned short *)data;
- break;
-
- case BI_AMIGA_BPPC_SCSI:
- powerup_BPPCPLUS_present = *(const unsigned short *)data;
- break;
-
- default:
- unknown = 1;
- }
- return(unknown);
-}
-
- /*
- * Identify builtin hardware
- */
-
-static void __init amiga_identify(void)
-{
- /* Fill in some default values, if necessary */
- if (amiga_eclock == 0)
- amiga_eclock = 709379;
-
- memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
-
- printk("Amiga hardware found: ");
- if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
- printk("[%s] ", amiga_models[amiga_model-AMI_500]);
- strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
- }
-
- switch(amiga_model) {
- case AMI_UNKNOWN:
- goto Generic;
-
- case AMI_600:
- case AMI_1200:
- AMIGAHW_SET(A1200_IDE);
- AMIGAHW_SET(PCMCIA);
- case AMI_500:
- case AMI_500PLUS:
- case AMI_1000:
- case AMI_2000:
- case AMI_2500:
- AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
- goto Generic;
-
- case AMI_3000:
- case AMI_3000T:
- AMIGAHW_SET(AMBER_FF);
- AMIGAHW_SET(MAGIC_REKICK);
- /* fall through */
- case AMI_3000PLUS:
- AMIGAHW_SET(A3000_SCSI);
- AMIGAHW_SET(A3000_CLK);
- AMIGAHW_SET(ZORRO3);
- goto Generic;
-
- case AMI_4000T:
- AMIGAHW_SET(A4000_SCSI);
- /* fall through */
- case AMI_4000:
- AMIGAHW_SET(A4000_IDE);
- AMIGAHW_SET(A3000_CLK);
- AMIGAHW_SET(ZORRO3);
- goto Generic;
-
- case AMI_CDTV:
- case AMI_CD32:
- AMIGAHW_SET(CD_ROM);
- AMIGAHW_SET(A2000_CLK); /* Is this correct? */
- goto Generic;
-
- Generic:
- AMIGAHW_SET(AMI_VIDEO);
- AMIGAHW_SET(AMI_BLITTER);
- AMIGAHW_SET(AMI_AUDIO);
- AMIGAHW_SET(AMI_FLOPPY);
- AMIGAHW_SET(AMI_KEYBOARD);
- AMIGAHW_SET(AMI_MOUSE);
- AMIGAHW_SET(AMI_SERIAL);
- AMIGAHW_SET(AMI_PARALLEL);
- AMIGAHW_SET(CHIP_RAM);
- AMIGAHW_SET(PAULA);
-
- switch(amiga_chipset) {
- case CS_OCS:
- case CS_ECS:
- case CS_AGA:
- switch (amiga_custom.deniseid & 0xf) {
- case 0x0c:
- AMIGAHW_SET(DENISE_HR);
- break;
- case 0x08:
- AMIGAHW_SET(LISA);
- break;
- }
- break;
- default:
- AMIGAHW_SET(DENISE);
- break;
- }
- switch ((amiga_custom.vposr>>8) & 0x7f) {
- case 0x00:
- AMIGAHW_SET(AGNUS_PAL);
- break;
- case 0x10:
- AMIGAHW_SET(AGNUS_NTSC);
- break;
- case 0x20:
- case 0x21:
- AMIGAHW_SET(AGNUS_HR_PAL);
- break;
- case 0x30:
- case 0x31:
- AMIGAHW_SET(AGNUS_HR_NTSC);
- break;
- case 0x22:
- case 0x23:
- AMIGAHW_SET(ALICE_PAL);
- break;
- case 0x32:
- case 0x33:
- AMIGAHW_SET(ALICE_NTSC);
- break;
- }
- AMIGAHW_SET(ZORRO);
- break;
-
- case AMI_DRACO:
- panic("No support for Draco yet");
-
- default:
- panic("Unknown Amiga Model");
- }
-
-#define AMIGAHW_ANNOUNCE(name, str) \
- if (AMIGAHW_PRESENT(name)) \
- printk(str)
-
- AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
- AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
- AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
- AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
- AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
- AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
- AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
- AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
- AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
- AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
- AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
- AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
- AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
- AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
- AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
- AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
- AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
- AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
- AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
- AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
- AMIGAHW_ANNOUNCE(LISA, "LISA ");
- AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
- AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
- AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
- AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
- AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
- AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
- AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
- AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
- if (AMIGAHW_PRESENT(ZORRO))
- printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
- printk("\n");
-
-#undef AMIGAHW_ANNOUNCE
-}
-
- /*
- * Setup the Amiga configuration info
- */
-
-void __init config_amiga(void)
-{
- int i;
-
- amiga_debug_init();
- amiga_identify();
-
- /* Some APUS boxes may have PCI memory, but ... */
- iomem_resource.name = "Memory";
- for (i = 0; i < 4; i++)
- request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
-
- mach_sched_init = amiga_sched_init;
- mach_init_IRQ = amiga_init_IRQ;
-#ifndef CONFIG_APUS
- mach_default_handler = &amiga_default_handler;
- mach_request_irq = amiga_request_irq;
- mach_free_irq = amiga_free_irq;
- enable_irq = amiga_enable_irq;
- disable_irq = amiga_disable_irq;
-#endif
- mach_get_model = amiga_get_model;
- mach_get_hardware_list = amiga_get_hardware_list;
- mach_gettimeoffset = amiga_gettimeoffset;
- if (AMIGAHW_PRESENT(A3000_CLK)){
- mach_gettod = a3000_gettod;
- rtc_resource.name = "A3000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- }
- else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
- mach_gettod = a2000_gettod;
- rtc_resource.name = "A2000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- }
-
- mach_max_dma_address = 0xffffffff; /*
- * default MAX_DMA=0xffffffff
- * on all machines. If we don't
- * do so, the SCSI code will not
- * be able to allocate any mem
- * for transfers, unless we are
- * dealing with a Z2 mem only
- * system. /Jes
- */
-
- mach_hwclk = amiga_hwclk;
- mach_set_clock_mmss = amiga_set_clock_mmss;
- mach_reset = amiga_reset;
-#ifdef CONFIG_HEARTBEAT
- mach_heartbeat = amiga_heartbeat;
-#endif
-
- /* Fill in the clock values (based on the 700 kHz E-Clock) */
- amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
- amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
-
- /* clear all DMA bits */
- amiga_custom.dmacon = DMAF_ALL;
- /* ensure that the DMA master bit is set */
- amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
-
- /* request all RAM */
- for (i = 0; i < m68k_num_memory; i++) {
- ram_resource[i].name =
- (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
- (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
- "16-bit Slow RAM";
- ram_resource[i].start = m68k_memory[i].addr;
- ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
- request_resource(&iomem_resource, &ram_resource[i]);
- }
-
- /* initialize chipram allocator */
- amiga_chip_init ();
-
- /* debugging using chipram */
- if (!strcmp( m68k_debug_device, "mem" )){
- if (!AMIGAHW_PRESENT(CHIP_RAM))
- printk("Warning: no chipram present for debugging\n");
- else {
- amiga_savekmsg_init();
- amiga_console_driver.write = amiga_mem_console_write;
- register_console(&amiga_console_driver);
- }
- }
-
- /* our beloved beeper */
- if (AMIGAHW_PRESENT(AMI_AUDIO))
- amiga_init_sound();
-
- /*
- * if it is an A3000, set the magic bit that forces
- * a hard rekick
- */
- if (AMIGAHW_PRESENT(MAGIC_REKICK))
- *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
-}
-
-static unsigned short jiffy_ticks;
-
-static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
- struct pt_regs *))
-{
- static struct resource sched_res = {
- "timer", 0x00bfd400, 0x00bfd5ff,
- };
- jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
-
- if (request_resource(&mb_resources._ciab, &sched_res))
- printk("Cannot allocate ciab.ta{lo,hi}\n");
- ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
- ciab.talo = jiffy_ticks % 256;
- ciab.tahi = jiffy_ticks / 256;
-
- /* install interrupt service routine for CIAB Timer A
- *
- * Please don't change this to use ciaa, as it interferes with the
- * SCSI code. We'll have to take a look at this later
- */
- request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
- /* start timer */
- ciab.cra |= 0x11;
-}
-
-#define TICK_SIZE 10000
-
-extern unsigned char cia_get_irq_mask(unsigned int irq);
-
-/* This is always executed with interrupts disabled. */
-static unsigned long amiga_gettimeoffset (void)
-{
- unsigned short hi, lo, hi2;
- unsigned long ticks, offset = 0;
-
- /* read CIA B timer A current value */
- hi = ciab.tahi;
- lo = ciab.talo;
- hi2 = ciab.tahi;
-
- if (hi != hi2) {
- lo = ciab.talo;
- hi = hi2;
- }
-
- ticks = hi << 8 | lo;
-
- if (ticks > jiffy_ticks / 2)
- /* check for pending interrupt */
- if (cia_get_irq_mask(IRQ_AMIGA_CIAB) & CIA_ICR_TA)
- offset = 10000;
-
- ticks = jiffy_ticks - ticks;
- ticks = (10000 * ticks) / jiffy_ticks;
-
- return ticks + offset;
-}
-
-static void a3000_gettod (int *yearp, int *monp, int *dayp,
- int *hourp, int *minp, int *secp)
-{
- volatile struct tod3000 *tod = TOD_3000;
-
- tod->cntrl1 = TOD3000_CNTRL1_HOLD;
-
- *secp = tod->second1 * 10 + tod->second2;
- *minp = tod->minute1 * 10 + tod->minute2;
- *hourp = tod->hour1 * 10 + tod->hour2;
- *dayp = tod->day1 * 10 + tod->day2;
- *monp = tod->month1 * 10 + tod->month2;
- *yearp = tod->year1 * 10 + tod->year2;
-
- tod->cntrl1 = TOD3000_CNTRL1_FREE;
-}
-
-static void a2000_gettod (int *yearp, int *monp, int *dayp,
- int *hourp, int *minp, int *secp)
-{
- volatile struct tod2000 *tod = TOD_2000;
-
- tod->cntrl1 = TOD2000_CNTRL1_HOLD;
-
- while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
- ;
-
- *secp = tod->second1 * 10 + tod->second2;
- *minp = tod->minute1 * 10 + tod->minute2;
- *hourp = (tod->hour1 & 3) * 10 + tod->hour2;
- *dayp = tod->day1 * 10 + tod->day2;
- *monp = tod->month1 * 10 + tod->month2;
- *yearp = tod->year1 * 10 + tod->year2;
-
- if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
- if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12)
- *hourp = 0;
- else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12)
- *hourp += 12;
- }
-
- tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-}
-
-static int amiga_hwclk(int op, struct hwclk_time *t)
-{
- if (AMIGAHW_PRESENT(A3000_CLK)) {
- volatile struct tod3000 *tod = TOD_3000;
-
- tod->cntrl1 = TOD3000_CNTRL1_HOLD;
-
- if (!op) { /* read */
- t->sec = tod->second1 * 10 + tod->second2;
- t->min = tod->minute1 * 10 + tod->minute2;
- t->hour = tod->hour1 * 10 + tod->hour2;
- t->day = tod->day1 * 10 + tod->day2;
- t->wday = tod->weekday;
- t->mon = tod->month1 * 10 + tod->month2 - 1;
- t->year = tod->year1 * 10 + tod->year2;
- if (t->year <= 69)
- t->year += 100;
- } else {
- tod->second1 = t->sec / 10;
- tod->second2 = t->sec % 10;
- tod->minute1 = t->min / 10;
- tod->minute2 = t->min % 10;
- tod->hour1 = t->hour / 10;
- tod->hour2 = t->hour % 10;
- tod->day1 = t->day / 10;
- tod->day2 = t->day % 10;
- if (t->wday != -1)
- tod->weekday = t->wday;
- tod->month1 = (t->mon + 1) / 10;
- tod->month2 = (t->mon + 1) % 10;
- if (t->year >= 100)
- t->year -= 100;
- tod->year1 = t->year / 10;
- tod->year2 = t->year % 10;
- }
-
- tod->cntrl1 = TOD3000_CNTRL1_FREE;
- } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
- volatile struct tod2000 *tod = TOD_2000;
-
- tod->cntrl1 = TOD2000_CNTRL1_HOLD;
-
- while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
- ;
-
- if (!op) { /* read */
- t->sec = tod->second1 * 10 + tod->second2;
- t->min = tod->minute1 * 10 + tod->minute2;
- t->hour = (tod->hour1 & 3) * 10 + tod->hour2;
- t->day = tod->day1 * 10 + tod->day2;
- t->wday = tod->weekday;
- t->mon = tod->month1 * 10 + tod->month2 - 1;
- t->year = tod->year1 * 10 + tod->year2;
- if (t->year <= 69)
- t->year += 100;
-
- if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
- if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12)
- t->hour = 0;
- else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12)
- t->hour += 12;
- }
- } else {
- tod->second1 = t->sec / 10;
- tod->second2 = t->sec % 10;
- tod->minute1 = t->min / 10;
- tod->minute2 = t->min % 10;
- if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE)
- tod->hour1 = t->hour / 10;
- else if (t->hour >= 12)
- tod->hour1 = TOD2000_HOUR1_PM +
- (t->hour - 12) / 10;
- else
- tod->hour1 = t->hour / 10;
- tod->hour2 = t->hour % 10;
- tod->day1 = t->day / 10;
- tod->day2 = t->day % 10;
- if (t->wday != -1)
- tod->weekday = t->wday;
- tod->month1 = (t->mon + 1) / 10;
- tod->month2 = (t->mon + 1) % 10;
- if (t->year >= 100)
- t->year -= 100;
- tod->year1 = t->year / 10;
- tod->year2 = t->year % 10;
- }
-
- tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- }
-
- return 0;
-}
-
-static int amiga_set_clock_mmss (unsigned long nowtime)
-{
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
- if (AMIGAHW_PRESENT(A3000_CLK)) {
- volatile struct tod3000 *tod = TOD_3000;
-
- tod->cntrl1 = TOD3000_CNTRL1_HOLD;
-
- tod->second1 = real_seconds / 10;
- tod->second2 = real_seconds % 10;
- tod->minute1 = real_minutes / 10;
- tod->minute2 = real_minutes % 10;
-
- tod->cntrl1 = TOD3000_CNTRL1_FREE;
- } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
- volatile struct tod2000 *tod = TOD_2000;
-
- tod->cntrl1 = TOD2000_CNTRL1_HOLD;
-
- while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
- ;
-
- tod->second1 = real_seconds / 10;
- tod->second2 = real_seconds % 10;
- tod->minute1 = real_minutes / 10;
- tod->minute2 = real_minutes % 10;
-
- tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- }
-
- return 0;
-}
-
-static NORET_TYPE void amiga_reset( void )
- ATTRIB_NORET;
-
-static void amiga_reset (void)
-{
- for (;;);
-}
-
-
- /*
- * Debugging
- */
-
-#define SAVEKMSG_MAXMEM 128*1024
-
-#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */
-#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
-
-struct savekmsg {
- unsigned long magic1; /* SAVEKMSG_MAGIC1 */
- unsigned long magic2; /* SAVEKMSG_MAGIC2 */
- unsigned long magicptr; /* address of magic1 */
- unsigned long size;
- char data[0];
-};
-
-static struct savekmsg *savekmsg = NULL;
-
-static void amiga_mem_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
- memcpy(savekmsg->data+savekmsg->size, s, count);
- savekmsg->size += count;
- }
-}
-
-static void amiga_savekmsg_init(void)
-{
- static struct resource debug_res = { "Debug" };
-
- savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
- savekmsg->magic1 = SAVEKMSG_MAGIC1;
- savekmsg->magic2 = SAVEKMSG_MAGIC2;
- savekmsg->magicptr = virt_to_phys(savekmsg);
- savekmsg->size = 0;
-}
-
-static void amiga_serial_putc(char c)
-{
- amiga_custom.serdat = (unsigned char)c | 0x100;
- mb();
- while (!(amiga_custom.serdatr & 0x2000))
- ;
-}
-
-void amiga_serial_console_write(struct console *co, const char *s,
- unsigned int count)
-{
-#if 0 /* def CONFIG_KGDB */
- /* FIXME:APUS GDB doesn't seem to like O-packages before it is
- properly connected with the target. */
- __gdb_output_string (s, count);
-#else
- while (count--) {
- if (*s == '\n')
- amiga_serial_putc('\r');
- amiga_serial_putc(*s++);
- }
-#endif
-}
-
-#ifdef CONFIG_SERIAL_CONSOLE
-void amiga_serial_puts(const char *s)
-{
- amiga_serial_console_write(NULL, s, strlen(s));
-}
-
-int amiga_serial_console_wait_key(struct console *co)
-{
- int ch;
-
- while (!(amiga_custom.intreqr & IF_RBF))
- barrier();
- ch = amiga_custom.serdatr & 0xff;
- /* clear the interrupt, so that another character can be read */
- amiga_custom.intreq = IF_RBF;
- return ch;
-}
-
-void amiga_serial_gets(struct console *co, char *s, int len)
-{
- int ch, cnt = 0;
-
- while (1) {
- ch = amiga_serial_console_wait_key(co);
-
- /* Check for backspace. */
- if (ch == 8 || ch == 127) {
- if (cnt == 0) {
- amiga_serial_putc('\007');
- continue;
- }
- cnt--;
- amiga_serial_puts("\010 \010");
- continue;
- }
-
- /* Check for enter. */
- if (ch == 10 || ch == 13)
- break;
-
- /* See if line is too long. */
- if (cnt >= len + 1) {
- amiga_serial_putc(7);
- cnt--;
- continue;
- }
-
- /* Store and echo character. */
- s[cnt++] = ch;
- amiga_serial_putc(ch);
- }
- /* Print enter. */
- amiga_serial_puts("\r\n");
- s[cnt] = 0;
-}
-#endif
-
-static void __init amiga_debug_init(void)
-{
- if (!strcmp( m68k_debug_device, "ser" )) {
- /* no initialization required (?) */
- amiga_console_driver.write = amiga_serial_console_write;
- register_console(&amiga_console_driver);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-static void amiga_heartbeat(int on)
-{
- if (on)
- ciaa.pra &= ~2;
- else
- ciaa.pra |= 2;
-}
-#endif
-
- /*
- * Amiga specific parts of /proc
- */
-
-static void amiga_get_model(char *model)
-{
- strcpy(model, amiga_model_name);
-}
-
-
-static int amiga_get_hardware_list(char *buffer)
-{
- int len = 0;
-
- if (AMIGAHW_PRESENT(CHIP_RAM))
- len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
- len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
- amiga_psfreq, amiga_eclock);
- if (AMIGAHW_PRESENT(AMI_VIDEO)) {
- char *type;
- switch(amiga_chipset) {
- case CS_OCS:
- type = "OCS";
- break;
- case CS_ECS:
- type = "ECS";
- break;
- case CS_AGA:
- type = "AGA";
- break;
- default:
- type = "Old or Unknown";
- break;
- }
- len += sprintf(buffer+len, "Graphics:\t%s\n", type);
- }
-
-#define AMIGAHW_ANNOUNCE(name, str) \
- if (AMIGAHW_PRESENT(name)) \
- len += sprintf (buffer+len, "\t%s\n", str)
-
- len += sprintf (buffer + len, "Detected hardware:\n");
-
- AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
- AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
- AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
- AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
- AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
- AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
- AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
- AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
- AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
- AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
- AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
- AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
- AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
- AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
- AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
- AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
- AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
- AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
- AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
- AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
- AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
- AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
- AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
- AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
- AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
- AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
- AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
- AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
- AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
- if (AMIGAHW_PRESENT(ZORRO))
- len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
- "Device%s\n",
- AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
- zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
-
-#undef AMIGAHW_ANNOUNCE
-
- return(len);
-}
-
-#ifdef CONFIG_APUS
-int get_hardware_list(char *buffer)
-{
- extern int get_cpuinfo(char *buffer);
- int len = 0;
- char model[80];
- u_long mem;
- int i;
-
- if (mach_get_model)
- mach_get_model(model);
- else
- strcpy(model, "Unknown PowerPC");
-
- len += sprintf(buffer+len, "Model:\t\t%s\n", model);
- len += get_cpuinfo(buffer+len);
- for (mem = 0, i = 0; i < m68k_realnum_memory; i++)
- mem += m68k_memory[i].size;
- len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
-
- if (mach_get_hardware_list)
- len += mach_get_hardware_list(buffer+len);
-
- return(len);
-}
-#endif
--- linux-2.6/arch/ppc/platforms/apus_setup.c 2006-10-11 04:56:59.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,798 +0,0 @@
-/*
- * Copyright (C) 1998, 1999 Jesper Skov
- *
- * Basically what is needed to replace functionality found in
- * arch/m68k allowing Amiga drivers to work under APUS.
- * Bits of code and/or ideas from arch/m68k and arch/ppc files.
- *
- * TODO:
- * This file needs a *really* good cleanup. Restructure and optimize.
- * Make sure it can be compiled for non-APUS configs. Begin to move
- * Amiga specific stuff into mach/amiga.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-
-/* Needs INITSERIAL call in head.S! */
-#undef APUS_DEBUG
-
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amigappc.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-unsigned long m68k_machtype;
-char debug_device[6] = "";
-
-extern void amiga_init_IRQ(void);
-
-extern void apus_setup_pci_ptrs(void);
-
-void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL;
-/* machine dependent irq functions */
-void (*mach_init_IRQ) (void) __initdata = NULL;
-void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL;
-void (*mach_get_model) (char *model) = NULL;
-int (*mach_get_hardware_list) (char *buffer) = NULL;
-int (*mach_get_irq_list) (struct seq_file *, void *) = NULL;
-void (*mach_process_int) (int, struct pt_regs *) = NULL;
-/* machine dependent timer functions */
-unsigned long (*mach_gettimeoffset) (void);
-void (*mach_gettod) (int*, int*, int*, int*, int*, int*);
-int (*mach_hwclk) (int, struct hwclk_time*) = NULL;
-int (*mach_set_clock_mmss) (unsigned long) = NULL;
-void (*mach_reset)( void );
-long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
-#ifdef CONFIG_HEARTBEAT
-void (*mach_heartbeat) (int) = NULL;
-extern void apus_heartbeat (void);
-#endif
-
-extern unsigned long amiga_model;
-extern unsigned decrementer_count;/* count value for 1e6/HZ microseconds */
-extern unsigned count_period_num; /* 1 decrementer count equals */
-extern unsigned count_period_den; /* count_period_num / count_period_den us */
-
-int num_memory = 0;
-struct mem_info memory[NUM_MEMINFO];/* memory description */
-/* FIXME: Duplicate memory data to avoid conflicts with m68k shared code. */
-int m68k_realnum_memory = 0;
-struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
-
-struct mem_info ramdisk;
-
-extern void config_amiga(void);
-
-static int __60nsram = 0;
-
-/* for cpuinfo */
-static int __bus_speed = 0;
-static int __speed_test_failed = 0;
-
-/********************************************** COMPILE PROTECTION */
-/* Provide some stubs that links to Amiga specific functions.
- * This allows CONFIG_APUS to be removed from generic PPC files while
- * preventing link errors for other PPC targets.
- */
-unsigned long apus_get_rtc_time(void)
-{
-#ifdef CONFIG_APUS
- extern unsigned long m68k_get_rtc_time(void);
-
- return m68k_get_rtc_time ();
-#else
- return 0;
-#endif
-}
-
-int apus_set_rtc_time(unsigned long nowtime)
-{
-#ifdef CONFIG_APUS
- extern int m68k_set_rtc_time(unsigned long nowtime);
-
- return m68k_set_rtc_time (nowtime);
-#else
- return 0;
-#endif
-}
-
-/*********************************************************** SETUP */
-/* From arch/m68k/kernel/setup.c. */
-void __init apus_setup_arch(void)
-{
-#ifdef CONFIG_APUS
- extern char cmd_line[];
- int i;
- char *p, *q;
-
- /* Let m68k-shared code know it should do the Amiga thing. */
- m68k_machtype = MACH_AMIGA;
-
- /* Parse the command line for arch-specific options.
- * For the m68k, this is currently only "debug=xxx" to enable printing
- * certain kernel messages to some machine-specific device. */
- for( p = cmd_line; p && *p; ) {
- i = 0;
- if (!strncmp( p, "debug=", 6 )) {
- strlcpy( debug_device, p+6, sizeof(debug_device) );
- if ((q = strchr( debug_device, ' ' ))) *q = 0;
- i = 1;
- } else if (!strncmp( p, "60nsram", 7 )) {
- APUS_WRITE (APUS_REG_WAITSTATE,
- REGWAITSTATE_SETRESET
- |REGWAITSTATE_PPCR
- |REGWAITSTATE_PPCW);
- __60nsram = 1;
- i = 1;
- }
-
- if (i) {
- /* option processed, delete it */
- if ((q = strchr( p, ' ' )))
- strcpy( p, q+1 );
- else
- *p = 0;
- } else {
- if ((p = strchr( p, ' ' ))) ++p;
- }
- }
-
- config_amiga();
-
-#if 0 /* Enable for logging - also include logging.o in Makefile rule */
- {
-#define LOG_SIZE 4096
- void* base;
-
- /* Throw away some memory - the P5 firmare stomps on top
- * of CHIP memory during bootup.
- */
- amiga_chip_alloc(0x1000);
-
- base = amiga_chip_alloc(LOG_SIZE+sizeof(klog_data_t));
- LOG_INIT(base, base+sizeof(klog_data_t), LOG_SIZE);
- }
-#endif
-#endif
-}
-
-int
-apus_show_cpuinfo(struct seq_file *m)
-{
- extern int __map_without_bats;
- extern unsigned long powerup_PCI_present;
-
- seq_printf(m, "machine\t\t: Amiga\n");
- seq_printf(m, "bus speed\t: %d%s", __bus_speed,
- (__speed_test_failed) ? " [failed]\n" : "\n");
- seq_printf(m, "using BATs\t: %s\n",
- (__map_without_bats) ? "No" : "Yes");
- seq_printf(m, "ram speed\t: %dns\n", (__60nsram) ? 60 : 70);
- seq_printf(m, "PCI bridge\t: %s\n",
- (powerup_PCI_present) ? "Yes" : "No");
- return 0;
-}
-
-static void get_current_tb(unsigned long long *time)
-{
- __asm __volatile ("1:mftbu 4 \n\t"
- " mftb 5 \n\t"
- " mftbu 6 \n\t"
- " cmpw 4,6 \n\t"
- " bne 1b \n\t"
- " stw 4,0(%0)\n\t"
- " stw 5,4(%0)\n\t"
- :
- : "r" (time)
- : "r4", "r5", "r6");
-}
-
-
-void apus_calibrate_decr(void)
-{
-#ifdef CONFIG_APUS
- unsigned long freq;
-
- /* This algorithm for determining the bus speed was
- contributed by Ralph Schmidt. */
- unsigned long long start, stop;
- int bus_speed;
- int speed_test_failed = 0;
-
- {
- unsigned long loop = amiga_eclock / 10;
-
- get_current_tb (&start);
- while (loop--) {
- unsigned char tmp;
-
- tmp = ciaa.pra;
- }
- get_current_tb (&stop);
- }
-
- bus_speed = (((unsigned long)(stop-start))*10*4) / 1000000;
- if (AMI_1200 == amiga_model)
- bus_speed /= 2;
-
- if ((bus_speed >= 47) && (bus_speed < 53)) {
- bus_speed = 50;
- freq = 12500000;
- } else if ((bus_speed >= 57) && (bus_speed < 63)) {
- bus_speed = 60;
- freq = 15000000;
- } else if ((bus_speed >= 63) && (bus_speed < 69)) {
- bus_speed = 67;
- freq = 16666667;
- } else {
- printk ("APUS: Unable to determine bus speed (%d). "
- "Defaulting to 50MHz", bus_speed);
- bus_speed = 50;
- freq = 12500000;
- speed_test_failed = 1;
- }
-
- /* Ease diagnostics... */
- {
- extern int __map_without_bats;
- extern unsigned long powerup_PCI_present;
-
- printk ("APUS: BATs=%d, BUS=%dMHz",
- (__map_without_bats) ? 0 : 1,
- bus_speed);
- if (speed_test_failed)
- printk ("[FAILED - please report]");
-
- printk (", RAM=%dns, PCI bridge=%d\n",
- (__60nsram) ? 60 : 70,
- (powerup_PCI_present) ? 1 : 0);
-
- /* print a bit more if asked politely... */
- if (!(ciaa.pra & 0x40)){
- extern unsigned int bat_addrs[4][3];
- int b;
- for (b = 0; b < 4; ++b) {
- printk ("APUS: BAT%d ", b);
- printk ("%08x-%08x -> %08x\n",
- bat_addrs[b][0],
- bat_addrs[b][1],
- bat_addrs[b][2]);
- }
- }
-
- }
-
- printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
- freq/1000000, freq%1000000);
- tb_ticks_per_jiffy = freq / HZ;
- tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
- __bus_speed = bus_speed;
- __speed_test_failed = speed_test_failed;
-#endif
-}
-
-void arch_gettod(int *year, int *mon, int *day, int *hour,
- int *min, int *sec)
-{
-#ifdef CONFIG_APUS
- if (mach_gettod)
- mach_gettod(year, mon, day, hour, min, sec);
- else
- *year = *mon = *day = *hour = *min = *sec = 0;
-#endif
-}
-
-/* for "kbd-reset" cmdline param */
-__init
-void kbd_reset_setup(char *str, int *ints)
-{
-}
-
-/*********************************************************** MEMORY */
-#define KMAP_MAX 32
-unsigned long kmap_chunks[KMAP_MAX*3];
-int kmap_chunk_count = 0;
-
-/* From pgtable.h */
-static __inline__ pte_t *my_find_pte(struct mm_struct *mm,unsigned long va)
-{
- pgd_t *dir = 0;
- pmd_t *pmd = 0;
- pte_t *pte = 0;
-
- va &= PAGE_MASK;
-
- dir = pgd_offset( mm, va );
- if (dir)
- {
- pmd = pmd_offset(dir, va & PAGE_MASK);
- if (pmd && pmd_present(*pmd))
- {
- pte = pte_offset(pmd, va);
- }
- }
- return pte;
-}
-
-
-/* Again simulating an m68k/mm/kmap.c function. */
-void kernel_set_cachemode( unsigned long address, unsigned long size,
- unsigned int cmode )
-{
- unsigned long mask, flags;
-
- switch (cmode)
- {
- case IOMAP_FULL_CACHING:
- mask = ~(_PAGE_NO_CACHE | _PAGE_GUARDED);
- flags = 0;
- break;
- case IOMAP_NOCACHE_SER:
- mask = ~0;
- flags = (_PAGE_NO_CACHE | _PAGE_GUARDED);
- break;
- default:
- panic ("kernel_set_cachemode() doesn't support mode %d\n",
- cmode);
- break;
- }
-
- size /= PAGE_SIZE;
- address &= PAGE_MASK;
- while (size--)
- {
- pte_t *pte;
-
- pte = my_find_pte(&init_mm, address);
- if ( !pte )
- {
- printk("pte NULL in kernel_set_cachemode()\n");
- return;
- }
-
- pte_val (*pte) &= mask;
- pte_val (*pte) |= flags;
- flush_tlb_page(find_vma(&init_mm,address),address);
-
- address += PAGE_SIZE;
- }
-}
-
-unsigned long mm_ptov (unsigned long paddr)
-{
- unsigned long ret;
- if (paddr < 16*1024*1024)
- ret = ZTWO_VADDR(paddr);
- else {
- int i;
-
- for (i = 0; i < kmap_chunk_count;){
- unsigned long phys = kmap_chunks[i++];
- unsigned long size = kmap_chunks[i++];
- unsigned long virt = kmap_chunks[i++];
- if (paddr >= phys
- && paddr < (phys + size)){
- ret = virt + paddr - phys;
- goto exit;
- }
- }
-
- ret = (unsigned long) __va(paddr);
- }
-exit:
-#ifdef DEBUGPV
- printk ("PTOV(%lx)=%lx\n", paddr, ret);
-#endif
- return ret;
-}
-
-int mm_end_of_chunk (unsigned long addr, int len)
-{
- if (memory[0].addr + memory[0].size == addr + len)
- return 1;
- return 0;
-}
-
-/*********************************************************** CACHE */
-
-#define L1_CACHE_BYTES 32
-#define MAX_CACHE_SIZE 8192
-void cache_push(__u32 addr, int length)
-{
- addr = mm_ptov(addr);
-
- if (MAX_CACHE_SIZE < length)
- length = MAX_CACHE_SIZE;
-
- while(length > 0){
- __asm ("dcbf 0,%0\n\t"
- : : "r" (addr));
- addr += L1_CACHE_BYTES;
- length -= L1_CACHE_BYTES;
- }
- /* Also flush trailing block */
- __asm ("dcbf 0,%0\n\t"
- "sync \n\t"
- : : "r" (addr));
-}
-
-void cache_clear(__u32 addr, int length)
-{
- if (MAX_CACHE_SIZE < length)
- length = MAX_CACHE_SIZE;
-
- addr = mm_ptov(addr);
-
- __asm ("dcbf 0,%0\n\t"
- "sync \n\t"
- "icbi 0,%0 \n\t"
- "isync \n\t"
- : : "r" (addr));
-
- addr += L1_CACHE_BYTES;
- length -= L1_CACHE_BYTES;
-
- while(length > 0){
- __asm ("dcbf 0,%0\n\t"
- "sync \n\t"
- "icbi 0,%0 \n\t"
- "isync \n\t"
- : : "r" (addr));
- addr += L1_CACHE_BYTES;
- length -= L1_CACHE_BYTES;
- }
-
- __asm ("dcbf 0,%0\n\t"
- "sync \n\t"
- "icbi 0,%0 \n\t"
- "isync \n\t"
- : : "r" (addr));
-}
-
-/****************************************************** from setup.c */
-void
-apus_restart(char *cmd)
-{
- local_irq_disable();
-
- APUS_WRITE(APUS_REG_LOCK,
- REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK2);
- APUS_WRITE(APUS_REG_LOCK,
- REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK3);
- APUS_WRITE(APUS_REG_LOCK,
- REGLOCK_BLACKMAGICK2|REGLOCK_BLACKMAGICK3);
- APUS_WRITE(APUS_REG_SHADOW, REGSHADOW_SELFRESET);
- APUS_WRITE(APUS_REG_RESET, REGRESET_AMIGARESET);
- for(;;);
-}
-
-void
-apus_power_off(void)
-{
- for (;;);
-}
-
-void
-apus_halt(void)
-{
- apus_restart(NULL);
-}
-
-/****************************************************** IRQ stuff */
-
-static unsigned char last_ipl[8];
-
-int apus_get_irq(void)
-{
- unsigned char ipl_emu, mask;
- unsigned int level;
-
- APUS_READ(APUS_IPL_EMU, ipl_emu);
- level = (ipl_emu >> 3) & IPLEMU_IPLMASK;
- mask = IPLEMU_SETRESET|IPLEMU_DISABLEINT|level;
- level ^= 7;
-
- /* Save previous IPL value */
- if (last_ipl[level])
- return -2;
- last_ipl[level] = ipl_emu;
-
- /* Set to current IPL value */
- APUS_WRITE(APUS_IPL_EMU, mask);
- APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|level);
-
-
-#ifdef __INTERRUPT_DEBUG
- printk("<%d:%d>", level, ~ipl_emu & IPLEMU_IPLMASK);
-#endif
- return level + IRQ_AMIGA_AUTO;
-}
-
-void apus_end_irq(unsigned int irq)
-{
- unsigned char ipl_emu;
- unsigned int level = irq - IRQ_AMIGA_AUTO;
-#ifdef __INTERRUPT_DEBUG
- printk("{%d}", ~last_ipl[level] & IPLEMU_IPLMASK);
-#endif
- /* Restore IPL to the previous value */
- ipl_emu = last_ipl[level] & IPLEMU_IPLMASK;
- APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET|IPLEMU_DISABLEINT|ipl_emu);
- last_ipl[level] = 0;
- ipl_emu ^= 7;
- APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu);
-}
-
-/****************************************************** debugging */
-
-/* some serial hardware definitions */
-#define SDR_OVRUN (1<<15)
-#define SDR_RBF (1<<14)
-#define SDR_TBE (1<<13)
-#define SDR_TSRE (1<<12)
-
-#define AC_SETCLR (1<<15)
-#define AC_UARTBRK (1<<11)
-
-#define SER_DTR (1<<7)
-#define SER_RTS (1<<6)
-#define SER_DCD (1<<5)
-#define SER_CTS (1<<4)
-#define SER_DSR (1<<3)
-
-static __inline__ void ser_RTSon(void)
-{
- ciab.pra &= ~SER_RTS; /* active low */
-}
-
-int __debug_ser_out( unsigned char c )
-{
- amiga_custom.serdat = c | 0x100;
- mb();
- while (!(amiga_custom.serdatr & 0x2000))
- barrier();
- return 1;
-}
-
-unsigned char __debug_ser_in( void )
-{
- unsigned char c;
-
- /* XXX: is that ok?? derived from amiga_ser.c... */
- while( !(amiga_custom.intreqr & IF_RBF) )
- barrier();
- c = amiga_custom.serdatr;
- /* clear the interrupt, so that another character can be read */
- amiga_custom.intreq = IF_RBF;
- return c;
-}
-
-int __debug_serinit( void )
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- /* turn off Rx and Tx interrupts */
- amiga_custom.intena = IF_RBF | IF_TBE;
-
- /* clear any pending interrupt */
- amiga_custom.intreq = IF_RBF | IF_TBE;
-
- local_irq_restore(flags);
-
- /*
- * set the appropriate directions for the modem control flags,
- * and clear RTS and DTR
- */
- ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */
- ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */
-
-#ifdef CONFIG_KGDB
- /* turn Rx interrupts on for GDB */
- amiga_custom.intena = IF_SETCLR | IF_RBF;
- ser_RTSon();
-#endif
-
- return 0;
-}
-
-void __debug_print_hex(unsigned long x)
-{
- int i;
- char hexchars[] = "0123456789ABCDEF";
-
- for (i = 0; i < 8; i++) {
- __debug_ser_out(hexchars[(x >> 28) & 15]);
- x <<= 4;
- }
- __debug_ser_out('\n');
- __debug_ser_out('\r');
-}
-
-void __debug_print_string(char* s)
-{
- unsigned char c;
- while((c = *s++))
- __debug_ser_out(c);
- __debug_ser_out('\n');
- __debug_ser_out('\r');
-}
-
-static void apus_progress(char *s, unsigned short value)
-{
- __debug_print_string(s);
-}
-
-/****************************************************** init */
-
-/* The number of spurious interrupts */
-volatile unsigned int num_spurious;
-
-extern struct irqaction amiga_sys_irqaction[AUTO_IRQS];
-
-
-extern void amiga_enable_irq(unsigned int irq);
-extern void amiga_disable_irq(unsigned int irq);
-
-struct hw_interrupt_type amiga_sys_irqctrl = {
- .typename = "Amiga IPL",
- .end = apus_end_irq,
-};
-
-struct hw_interrupt_type amiga_irqctrl = {
- .typename = "Amiga ",
- .enable = amiga_enable_irq,
- .disable = amiga_disable_irq,
-};
-
-#define HARDWARE_MAPPED_SIZE (512*1024)
-unsigned long __init apus_find_end_of_memory(void)
-{
- int shadow = 0;
- unsigned long total;
-
- /* The memory size reported by ADOS excludes the 512KB
- reserved for PPC exception registers and possibly 512KB
- containing a shadow of the ADOS ROM. */
- {
- unsigned long size = memory[0].size;
-
- /* If 2MB aligned, size was probably user
- specified. We can't tell anything about shadowing
- in this case so skip shadow assignment. */
- if (0 != (size & 0x1fffff)){
- /* Align to 512KB to ensure correct handling
- of both memfile and system specified
- sizes. */
- size = ((size+0x0007ffff) & 0xfff80000);
- /* If memory is 1MB aligned, assume
- shadowing. */
- shadow = !(size & 0x80000);
- }
-
- /* Add the chunk that ADOS does not see. by aligning
- the size to the nearest 2MB limit upwards. */
- memory[0].size = ((size+0x001fffff) & 0xffe00000);
- }
-
- ppc_memstart = memory[0].addr;
- ppc_memoffset = PAGE_OFFSET - PPC_MEMSTART;
- total = memory[0].size;
-
- /* Remove the memory chunks that are controlled by special
- Phase5 hardware. */
-
- /* Remove the upper 512KB if it contains a shadow of
- the ADOS ROM. FIXME: It might be possible to
- disable this shadow HW. Check the booter
- (ppc_boot.c) */
- if (shadow)
- total -= HARDWARE_MAPPED_SIZE;
-
- /* Remove the upper 512KB where the PPC exception
- vectors are mapped. */
- total -= HARDWARE_MAPPED_SIZE;
-
- /* Linux/APUS only handles one block of memory -- the one on
- the PowerUP board. Other system memory is horrible slow in
- comparison. The user can use other memory for swapping
- using the z2ram device. */
- return total;
-}
-
-static void __init
-apus_map_io(void)
-{
- /* Map PPC exception vectors. */
- io_block_mapping(0xfff00000, 0xfff00000, 0x00020000, _PAGE_KERNEL);
- /* Map chip and ZorroII memory */
- io_block_mapping(zTwoBase, 0x00000000, 0x01000000, _PAGE_IO);
-}
-
-__init
-void apus_init_IRQ(void)
-{
- struct irqaction *action;
- int i;
-
-#ifdef CONFIG_PCI
- apus_setup_pci_ptrs();
-#endif
-
- for ( i = 0 ; i < AMI_IRQS; i++ ) {
- irq_desc[i].status = IRQ_LEVEL;
- if (i < IRQ_AMIGA_AUTO) {
- irq_desc[i].chip = &amiga_irqctrl;
- } else {
- irq_desc[i].chip = &amiga_sys_irqctrl;
- action = &amiga_sys_irqaction[i-IRQ_AMIGA_AUTO];
- if (action->name)
- setup_irq(i, action);
- }
- }
-
- amiga_init_IRQ();
-
-}
-
-__init
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- extern int parse_bootinfo(const struct bi_record *);
- extern char _end[];
-
- /* Parse bootinfo. The bootinfo is located right after
- the kernel bss */
- parse_bootinfo((const struct bi_record *)&_end);
-#ifdef CONFIG_BLK_DEV_INITRD
- /* Take care of initrd if we have one. Use data from
- bootinfo to avoid the need to initialize PPC
- registers when kernel is booted via a PPC reset. */
- if ( ramdisk.addr ) {
- initrd_start = (unsigned long) __va(ramdisk.addr);
- initrd_end = (unsigned long)
- __va(ramdisk.size + ramdisk.addr);
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- ISA_DMA_THRESHOLD = 0x00ffffff;
-
- ppc_md.setup_arch = apus_setup_arch;
- ppc_md.show_cpuinfo = apus_show_cpuinfo;
- ppc_md.init_IRQ = apus_init_IRQ;
- ppc_md.get_irq = apus_get_irq;
-
-#ifdef CONFIG_HEARTBEAT
- ppc_md.heartbeat = apus_heartbeat;
- ppc_md.heartbeat_count = 1;
-#endif
-#ifdef APUS_DEBUG
- __debug_serinit();
- ppc_md.progress = apus_progress;
-#endif
- ppc_md.init = NULL;
-
- ppc_md.restart = apus_restart;
- ppc_md.power_off = apus_power_off;
- ppc_md.halt = apus_halt;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = apus_set_rtc_time;
- ppc_md.get_rtc_time = apus_get_rtc_time;
- ppc_md.calibrate_decr = apus_calibrate_decr;
-
- ppc_md.find_end_of_memory = apus_find_end_of_memory;
- ppc_md.setup_io_mappings = apus_map_io;
-}
--- linux-2.6/arch/ppc/platforms/apus_pci.c 2007-07-25 23:27:44.000000000 +0200
+++ /dev/null 2006-09-19 00:45:31.000000000 +0200
@@ -1,207 +0,0 @@
-/*
- * Copyright (C) Michel D�nzer <michdaen@...c.ethz.ch>
- *
- * APUS PCI routines.
- *
- * Currently, only B/CVisionPPC cards (Permedia2) are supported.
- *
- * Thanks to Geert Uytterhoeven for the idea:
- * Read values from given config space(s) for the first devices, -1 otherwise
- *
- */
-
-#ifdef CONFIG_AMIGA
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#include "apus_pci.h"
-
-
-/* These definitions are mostly adapted from pm2fb.c */
-
-#undef APUS_PCI_MASTER_DEBUG
-#ifdef APUS_PCI_MASTER_DEBUG
-#define DPRINTK(a,b...) printk(KERN_DEBUG "apus_pci: %s: " a, __FUNCTION__ , ## b)
-#else
-#define DPRINTK(a,b...)
-#endif
-
-/*
- * The _DEFINITIVE_ memory mapping/unmapping functions.
- * This is due to the fact that they're changing soooo often...
- */
-#define DEFW() wmb()
-#define DEFR() rmb()
-#define DEFRW() mb()
-
-#define DEVNO(d) ((d)>>3)
-#define FNNO(d) ((d)&7)
-
-
-extern unsigned long powerup_PCI_present;
-
-static struct pci_controller *apus_hose;
-
-
-void *pci_io_base(unsigned int bus)
-{
- return 0;
-}
-
-
-int
-apus_pcibios_read_config(struct pci_bus *bus, int devfn, int offset,
- int len, u32 *val)
-{
- int fnno = FNNO(devfn);
- int devno = DEVNO(devfn);
- volatile unsigned char *cfg_data;
-
- if (bus->number > 0 || devno != 1) {
- *val = ~0;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- /* base address + function offset + offset ^ endianness conversion */
- /* XXX the fnno<<5 bit seems wacky -- paulus */
- cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1));
- switch (len) {
- case 1:
- *val = readb(cfg_data);
- break;
- case 2:
- *val = readw(cfg_data);
- break;
- default:
- *val = readl(cfg_data);
- break;
- }
-
- DPRINTK("read b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n",
- bus->number, devfn>>3, devfn&7, offset, len, *val);
- return PCIBIOS_SUCCESSFUL;
-}
-
-int
-apus_pcibios_write_config(struct pci_bus *bus, int devfn, int offset,
- int len, u32 *val)
-{
- int fnno = FNNO(devfn);
- int devno = DEVNO(devfn);
- volatile unsigned char *cfg_data;
-
- if (bus->number > 0 || devno != 1) {
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- /* base address + function offset + offset ^ endianness conversion */
- /* XXX the fnno<<5 bit seems wacky -- paulus */
- cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1));
- switch (len) {
- case 1:
- writeb(val, cfg_data); DEFW();
- break;
- case 2:
- writew(val, cfg_data); DEFW();
- break;
- default:
- writel(val, cfg_data); DEFW();
- break;
- }
-
- DPRINTK("write b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n",
- bus->number, devfn>>3, devfn&7, offset, len, val);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops apus_pci_ops = {
- apus_pcibios_read_config,
- apus_pcibios_write_config
-};
-
-static struct resource pci_mem = { "B/CVisionPPC PCI mem", CVPPC_FB_APERTURE_ONE, CVPPC_PCI_CONFIG, IORESOURCE_MEM };
-
-void __init
-apus_pcibios_fixup(void)
-{
-/* struct pci_dev *dev = pci_find_slot(0, 1<<3);
- unsigned int reg, val, offset;*/
-
- /* FIXME: interrupt? */
- /*dev->interrupt = xxx;*/
-
- request_resource(&iomem_resource, &pci_mem);
- printk("%s: PCI mem resource requested\n", __FUNCTION__);
-}
-
-static void __init apus_pcibios_fixup_bus(struct pci_bus *bus)
-{
- bus->resource[1] = &pci_mem;
-}
-
-
-/*
- * This is from pm2fb.c again
- *
- * Check if PCI (B/CVisionPPC) is available, initialize it and set up
- * the pcibios_* pointers
- */
-
-
-void __init
-apus_setup_pci_ptrs(void)
-{
- if (!powerup_PCI_present) {
- DPRINTK("no PCI bridge detected\n");
- return;
- }
- DPRINTK("Phase5 B/CVisionPPC PCI bridge detected.\n");
-
- apus_hose = pcibios_alloc_controller();
- if (!apus_hose) {
- printk("apus_pci: Can't allocate PCI controller structure\n");
- return;
- }
-
- if (!(apus_hose->cfg_data = ioremap(CVPPC_PCI_CONFIG, 256))) {
- printk("apus_pci: unable to map PCI config region\n");
- return;
- }
-
- if (!(apus_hose->cfg_addr = ioremap(CSPPC_PCI_BRIDGE, 256))) {
- printk("apus_pci: unable to map PCI bridge\n");
- return;
- }
-
- writel(CSPPCF_BRIDGE_BIG_ENDIAN, apus_hose->cfg_addr + CSPPC_BRIDGE_ENDIAN);
- DEFW();
-
- writel(CVPPC_REGS_REGION, apus_hose->cfg_data+ PCI_BASE_ADDRESS_0);
- DEFW();
- writel(CVPPC_FB_APERTURE_ONE, apus_hose->cfg_data + PCI_BASE_ADDRESS_1);
- DEFW();
- writel(CVPPC_FB_APERTURE_TWO, apus_hose->cfg_data + PCI_BASE_ADDRESS_2);
- DEFW();
- writel(CVPPC_ROM_ADDRESS, apus_hose->cfg_data + PCI_ROM_ADDRESS);
- DEFW();
-
- writel(0xef000000 | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER, apus_hose->cfg_data + PCI_COMMAND);
- DEFW();
-
- apus_hose->first_busno = 0;
- apus_hose->last_busno = 0;
- apus_hose->ops = &apus_pci_ops;
- ppc_md.pcibios_fixup = apus_pcibios_fixup;
- ppc_md.pcibios_fixup_bus = apus_pcibios_fixup_bus;
-
- return;
-}
-
-#endif /* CONFIG_AMIGA */
Download attachment "patch-remove-apus.gz" of type "application/octet-stream" (37016 bytes)
Powered by blists - more mailing lists