Shutdown: hda Power down. acpi_power_off called Linux version 2.6.20 (root@albrecht.rdi1.com) (gcc version 3.3.3) #1 Mon Jun 25 14:59:29 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001bef0000 end: 000000001bff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001bff0000 size: 0000000000003000 end: 000000001bff3000 type: 4 copy_e820_map() start: 000000001bff3000 size: 000000000000d000 end: 000000001c000000 type: 3 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114672 early_node_map[1] active PFN ranges 0: 0 -> 114672 DMI 2.2 present. Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) Detected 800.374 MHz processor. Built 1 zonelists. Total pages: 113777 Kernel command line: root=/dev/hda1 vga=791 ide=nodma noinitrd console=ttyS1,9600 console=tty0 ide_setup: ide=nodma : Prevented DMA No local APIC present or hardware disabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 446512k/458688k available (4601k kernel code, 11524k reserved, 2000k data, 236k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB) vmalloc : 0xdc800000 - 0xfffb4000 ( 567 MB) lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB) .init : 0xc0776000 - 0xc07b1000 ( 236 kB) .data : 0xc057e4c8 - 0xc07725cc (2000 kB) .text : 0xc0100000 - 0xc057e4c8 (4601 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1602.69 BogoMIPS (lpj=3205393) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) Compat vDSO mapped to ffffe000. CPU: Centaur VIA Nehemiah stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 12c0) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa910, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *7 10 11 12) ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22) ACPI: PCI Interrupt Link [ALKD] (IRQs *23) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e8000000-ebffffff NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 22k freed audit: initializing netlink socket (disabled) audit(1188248292.020:1): initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu NTFS driver 2.1.28 [Flags: R/W]. fuse init (API version 7.8) Supermount version 2.0.4 for kernel 2.6 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:874b vesafb: pmi: set display start = c00c879c, set palette = c00c87fc vesafb: pmi: ports = b4c3 b503 d403 d503 cc03 d703 d803 d903 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 8984 bytes,<6>...found (1024x768, 14465 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) lp: driver loaded but no devices found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 VIA RNG detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA CLE266 chipset agpgart: AGP aperture is 128M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [drm] Initialized via 2.10.0 20060529 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ˙serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 rhine II/III pci_rev: 139 name: Rhine III rhn0: VIA Rhine III at 0xee000000, 00:d0:f8:1b:4f:2a, IRQ 7. rhn0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:12.0, from 7 to 12 rhine II/III pci_rev: 116 name: Rhine II eth0: VIA Rhine II at 0xee002000, 00:d0:f8:1b:4f:29, IRQ 12. eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 12 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:pio hda: SanDisk SDCFB-1024, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63 hda: hda1 hda2 usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 12, io base 0x0000e100 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 6, io base 0x0000e300 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled usbcore: registered new interface driver uss720 drivers/usb/misc/uss720.c: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip drivers/usb/misc/uss720.c: NOTE: this is a special purpose driver to allow nonstandard drivers/usb/misc/uss720.c: protocols (eg. bitbang) over USS720 usb to parallel cables drivers/usb/misc/uss720.c: If you just want to connect to a printer, use usblp instead PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 Linux telephony interface: v1.00 ixj driver initialized. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-usx2y ALSA device list: #0: VIA 8235 with VIA1612A at 0xe500, irq 6 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3583 buckets, 28664 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation Using IPI Shortcut mode ACPI: (supports<6>Time: tsc clocksource has been installed. S0<6>Time: pit clocksource has been installed. S1 S4 S5) ReiserFS: hda1: warning: read_super_block: found reiserfs format "3.6" with non-standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 512, journal first block 18, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 236k freed execve("/usr/bin/cryptsetup", ["cryptsetup", "create", "mainpartition", "/dev/hda2"], [/* 9 vars */]) = 0 brk(0) = 0x804e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/lib/i686/libgcrypt.so.11", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/lib/i686", 0xbf9557c8) = -1 ENOENT (No such file or directory) open("/usr/local/lib/libgcrypt.so.11", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1325792, ...}) = 0 old_mmap(NULL, 305924, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f87000 old_mmap(0xb7fcd000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0xb7fcd000 mprotect(0xbf956000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC|0x1000000) = 0 close(3) = 0 open("/usr/local/lib/libnsl.so.1", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f86000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 5\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=92508, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f85000 old_mmap(NULL, 88064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f6f000 old_mmap(0xb7f81000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0xb7f81000 old_mmap(0xb7f83000, 6144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f83000 close(3) = 0 open("/usr/local/lib/libgpg-error.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\6\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=44593, ...}) = 0 old_mmap(NULL, 13472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f6b000 old_mmap(0xb7f6e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xb7f6e000 close(3) = 0 open("/usr/local/lib/libdevmapper.so.1.01", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libdevmapper.so.1.01", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\22\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0555, st_size=30537, ...}) = 0 old_mmap(NULL, 26904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f64000 old_mmap(0xb7f69000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xb7f69000 close(3) = 0 open("/usr/local/lib/libpopt.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/libpopt.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\23"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=26836, ...}) = 0 old_mmap(NULL, 29688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f5c000 old_mmap(0xb7f63000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0xb7f63000 close(3) = 0 open("/usr/local/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e3f000 mprotect(0xb7f55000, 27924, PROT_NONE) = 0 old_mmap(0xb7f56000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f56000 old_mmap(0xb7f5a000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f5a000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e3e000 mprotect(0xb7f56000, 4096, PROT_READ) = 0 munmap(0xb7f86000, 1610) = 0 brk(0) = 0x804e000 brk(0x806f000) = 0x806f000 mlockall(MCL_CURRENT|MCL_FUTURE) = 0 open("/proc/devices", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f86000 read(3, "Character devices:\n 1 mem\n 2 p"..., 1024) = 513 close(3) = 0 munmap(0xb7f86000, 4096) = 0 open("/proc/misc", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f86000 read(3, " 63 device-mapper\n223 uinput\n 1"..., 1024) = 100 close(3) = 0 munmap(0xb7f86000, 4096) = 0 stat64("/dev/mapper/control", 0xbf954bf0) = -1 ENOENT (No such file or directory) umask(022) = 022 stat64("/dev/mapper", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 umask(022) = 022 mknod("/dev/mapper/control", S_IFCHR|0600, makedev(10, 63)) = 0 open("/dev/mapper/control", O_RDWR|O_LARGEFILE) = 3 ioctl(3, DM_VERSION, 0x804e338) = 0 ioctl(3, DM_TABLE_STATUS, 0x804e300) = -1 ENXIO (No such device or address) open("/dev/hda2", O_RDONLY|O_LARGEFILE) = 4 ioctl(4, BLKGETSIZE64, 0xbf955de8) = 0 close(4) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf955c7c) = -1 EINVAL (Invalid argument) read(0, "b", 1) = 1 read(0, "9", 1) = 1 read(0, "9", 1) = 1 read(0, "9", 1) = 1 read(0, "b", 1) = 1 read(0, "8", 1) = 1 read(0, "0", 1) = 1 read(0, "d", 1) = 1 read(0, "b", 1) = 1 read(0, "a", 1) = 1 read(0, "9", 1) = 1 read(0, "e", 1) = 1 read(0, "f", 1) = 1 read(0, "5", 1) = 1 read(0, "b", 1) = 1 read(0, "b", 1) = 1 read(0, "1", 1) = 1 read(0, "c", 1) = 1 read(0, "8", 1) = 1 read(0, "f", 1) = 1 read(0, "7", 1) = 1 read(0, "e", 1) = 1 read(0, "4", 1) = 1 read(0, "5", 1) = 1 read(0, "f", 1) = 1 read(0, "6", 1) = 1 read(0, "4", 1) = 1 read(0, "f", 1) = 1 read(0, "1", 1) = 1 read(0, "a", 1) = 1 read(0, "2", 1) = 1 read(0, "2", 1) = 1 read(0, "\n", 1) = 1 ioctl(3, DM_DEV_CREATE, 0x8052390) = 0 ioctl(3, DM_TABLE_LOAD, 0x8052390) = 0 ioctl(3, DM_DEV_SUSPEND, 0x8052390) = 0 close(3) = 0 stat64("/dev/mapper/mainpartition", 0xbf954e50) = -1 ENOENT (No such file or directory) umask(0) = 022 mknod("/dev/mapper/mainpartition", S_IFBLK|0600, makedev(254, 0)) = 0 umask(022) = 0 chown32("/dev/mapper/mainpartition", 0, 0) = 0 exit_group(0) = ? execve("/bin/mount", ["mount", "-n", "-t", "rReiserFS: dm-0: warning: read_super_block: found reiserfs format "3.6" with non-standard journal eiserfs", "/dev/ReiserFS: dm-0: using ordered data mode mapper/mainpartiReiserFS: dm-0: journal params: device dm-0, size 2048, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 tion", "/mnt"], ReiserFS: dm-0: checking transaction log (dm-0) [/* 9 vars */]) = 0 brk(0) = 0x8077000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7efd000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7de0000 mprotect(0xb7ef6000, 27924, PROT_NONE) = 0 old_mmap(0xb7ef7000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7ef7000 old_mmap(0xb7efb000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7efb000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7ddf000 mprotect(0xb7ef7000, 4096, PROT_READ) = 0 munmap(0xb7efd000, 1610) = 0 getpid() = 1094 stat64("/etc/busybox.conf", {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 brk(0) = 0x8077000 brk(0x8098000) = 0x8098000 open("/etc/busybox.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7efd000 read(3, "[SUID]\nsu = ssx 0.0\nsulogin = sx"..., 4096) = 38 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7efd000, 4096) = 0 getuid32() = 0 getgid32() = 0 setgid32(0) = 0 setuid32(0) = 0 lstat64("/dev/mapper/mainpartition", {st_mode=S_IFBLK|0600, st_rdev=makedev(254, 0), ...}) = 0 mount("/dev/mapper/mainpartition", "/mnt", "reiserfs", 0x8000, 0x8077080ReiserFS: dm-0: replayed 13 transactions in 3 seconds ReiserFS: dm-0: Using r5 hash to sort names ) = 0 exit_group(0) = ? Mounting File System---------------------------------------------------------------------[ Done ] Initializing variables-------------------------------------------------------------------[ Done ] Starting PCMCIA--------------------------------------------------------------------------[ Done ] Starting Network-------------------------------------------------------------------------[ Done ] Starting the cloning interface-----------------------------------------------------------[ Done ] Starting the printing subsystem----------------------------------------------------------[ Done ] Starting local services------------------------------------------------------------------[ Done ] Starting custom services-----------------------------------------------------------------[ Done ] Starting the X server--------------------------------------------------------------------Restarting system. Linux version 2.6.20 (root@albrecht.rdi1.com) (gcc version 3.3.3) #1 Mon Jun 25 14:59:29 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001bef0000 end: 000000001bff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001bff0000 size: 0000000000003000 end: 000000001bff3000 type: 4 copy_e820_map() start: 000000001bff3000 size: 000000000000d000 end: 000000001c000000 type: 3 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114672 early_node_map[1] active PFN ranges 0: 0 -> 114672 DMI 2.2 present. Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) Detected 800.374 MHz processor. Built 1 zonelists. Total pages: 113777 Kernel command line: root=/dev/hda1 vga=791 ide=nodma noinitrd console=ttyS1,9600 console=tty0 ide_setup: ide=nodma : Prevented DMA No local APIC present or hardware disabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 446512k/458688k available (4601k kernel code, 11524k reserved, 2000k data, 236k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB) vmalloc : 0xdc800000 - 0xfffb4000 ( 567 MB) lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB) .init : 0xc0776000 - 0xc07b1000 ( 236 kB) .data : 0xc057e4c8 - 0xc07725cc (2000 kB) .text : 0xc0100000 - 0xc057e4c8 (4601 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1602.69 BogoMIPS (lpj=3205384) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) Compat vDSO mapped to ffffe000. CPU: Centaur VIA Nehemiah stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 12c0) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa910, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *7 10 11 12) ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22) ACPI: PCI Interrupt Link [ALKD] (IRQs *23) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e8000000-ebffffff NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 22k freed audit: initializing netlink socket (disabled) audit(1188309481.028:1): initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu NTFS driver 2.1.28 [Flags: R/W]. fuse init (API version 7.8) Supermount version 2.0.4 for kernel 2.6 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:874b vesafb: pmi: set display start = c00c879c, set palette = c00c87fc vesafb: pmi: ports = b4c3 b503 d403 d503 cc03 d703 d803 d903 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 8984 bytes,<6>...found (1024x768, 14465 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) lp: driver loaded but no devices found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 VIA RNG detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA CLE266 chipset agpgart: AGP aperture is 128M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [drm] Initialized via 2.10.0 20060529 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ˙serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 rhine II/III pci_rev: 139 name: Rhine III rhn0: VIA Rhine III at 0xee000000, 00:d0:f8:1b:4f:2a, IRQ 7. rhn0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:12.0, from 7 to 12 rhine II/III pci_rev: 116 name: Rhine II eth0: VIA Rhine II at 0xee002000, 00:d0:f8:1b:4f:29, IRQ 12. eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 12 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:pio hda: SanDisk SDCFB-1024, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63 hda: hda1 hda2 usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 12, io base 0x0000e100 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 6, io base 0x0000e300 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled usbcore: registered new interface driver uss720 drivers/usb/misc/uss720.c: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip drivers/usb/misc/uss720.c: NOTE: this is a special purpose driver to allow nonstandard drivers/usb/misc/uss720.c: protocols (eg. bitbang) over USS720 usb to parallel cables drivers/usb/misc/uss720.c: If you just want to connect to a printer, use usblp instead PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 Linux telephony interface: v1.00 ixj driver initialized. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-usx2y ALSA device list: #0: VIA 8235 with VIA1612A at 0xe500, irq 6 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3583 buckets, 28664 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation Using IPI Shortcut mode ACPI: (supports<6>Time: tsc clocksource has been installed. S0<6>Time: pit clocksource has been installed. S1 S4 S5) ReiserFS: hda1: warning: read_super_block: found reiserfs format "3.6" with non-standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 512, journal first block 18, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 236k freed execve("/usr/bin/cryptsetup", ["cryptsetup", "create", "mainpartition", "/dev/hda2"], [/* 9 vars */]) = 0 brk(0) = 0x804e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/lib/i686/libgcrypt.so.11", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/lib/i686", 0xbf7fdba8) = -1 ENOENT (No such file or directory) open("/usr/local/lib/libgcrypt.so.11", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1325792, ...}) = 0 old_mmap(NULL, 305924, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f9c000 old_mmap(0xb7fe2000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0xb7fe2000 mprotect(0xbf7fe000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC|0x1000000) = 0 close(3) = 0 open("/usr/local/lib/libnsl.so.1", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f9b000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 5\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=92508, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f9a000 old_mmap(NULL, 88064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f84000 old_mmap(0xb7f96000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0xb7f96000 old_mmap(0xb7f98000, 6144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f98000 close(3) = 0 open("/usr/local/lib/libgpg-error.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\6\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=44593, ...}) = 0 old_mmap(NULL, 13472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f80000 old_mmap(0xb7f83000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xb7f83000 close(3) = 0 open("/usr/local/lib/libdevmapper.so.1.01", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libdevmapper.so.1.01", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\22\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0555, st_size=30537, ...}) = 0 old_mmap(NULL, 26904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f79000 old_mmap(0xb7f7e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xb7f7e000 close(3) = 0 open("/usr/local/lib/libpopt.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/libpopt.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\23"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=26836, ...}) = 0 old_mmap(NULL, 29688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f71000 old_mmap(0xb7f78000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0xb7f78000 close(3) = 0 open("/usr/local/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e54000 mprotect(0xb7f6a000, 27924, PROT_NONE) = 0 old_mmap(0xb7f6b000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f6b000 old_mmap(0xb7f6f000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f6f000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e53000 mprotect(0xb7f6b000, 4096, PROT_READ) = 0 munmap(0xb7f9b000, 1610) = 0 brk(0) = 0x804e000 brk(0x806f000) = 0x806f000 mlockall(MCL_CURRENT|MCL_FUTURE) = 0 open("/proc/devices", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f9b000 read(3, "Character devices:\n 1 mem\n 2 p"..., 1024) = 513 close(3) = 0 munmap(0xb7f9b000, 4096) = 0 open("/proc/misc", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f9b000 read(3, " 63 device-mapper\n223 uinput\n 1"..., 1024) = 100 close(3) = 0 munmap(0xb7f9b000, 4096) = 0 stat64("/dev/mapper/control", 0xbf7fcfd0) = -1 ENOENT (No such file or directory) umask(022) = 022 stat64("/dev/mapper", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 umask(022) = 022 mknod("/dev/mapper/control", S_IFCHR|0600, makedev(10, 63)) = 0 open("/dev/mapper/control", O_RDWR|O_LARGEFILE) = 3 ioctl(3, DM_VERSION, 0x804e338) = 0 ioctl(3, DM_TABLE_STATUS, 0x804e300) = -1 ENXIO (No such device or address) open("/dev/hda2", O_RDONLY|O_LARGEFILE) = 4 ioctl(4, BLKGETSIZE64, 0xbf7fe1c8) = 0 close(4) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf7fe05c) = -1 EINVAL (Invalid argument) read(0, "b", 1) = 1 read(0, "9", 1) = 1 read(0, "9", 1) = 1 read(0, "9", 1) = 1 read(0, "b", 1) = 1 read(0, "8", 1) = 1 read(0, "0", 1) = 1 read(0, "d", 1) = 1 read(0, "b", 1) = 1 read(0, "a", 1) = 1 read(0, "9", 1) = 1 read(0, "e", 1) = 1 read(0, "f", 1) = 1 read(0, "5", 1) = 1 read(0, "b", 1) = 1 read(0, "b", 1) = 1 read(0, "1", 1) = 1 read(0, "c", 1) = 1 read(0, "8", 1) = 1 read(0, "f", 1) = 1 read(0, "7", 1) = 1 read(0, "e", 1) = 1 read(0, "4", 1) = 1 read(0, "5", 1) = 1 read(0, "f", 1) = 1 read(0, "6", 1) = 1 read(0, "4", 1) = 1 read(0, "f", 1) = 1 read(0, "1", 1) = 1 read(0, "a", 1) = 1 read(0, "2", 1) = 1 read(0, "2", 1) = 1 read(0, "\n", 1) = 1 ioctl(3, DM_DEV_CREATE, 0x8052390) = 0 ioctl(3, DM_TABLE_LOAD, 0x8052390) = 0 ioctl(3, DM_DEV_SUSPEND, 0x8052390) = 0 close(3) = 0 stat64("/dev/mapper/mainpartition", 0xbf7fd230) = -1 ENOENT (No such file or directory) umask(0) = 022 mknod("/dev/mapper/mainpartition", S_IFBLK|0600, makedev(254, 0)) = 0 umask(022) = 0 chown32("/dev/mapper/mainpartition", 0, 0) = 0 exit_group(0) = ? execve("/bin/mount", ["mount", "-n", "-t", "rReiserFS: dm-0: warning: read_super_block: found reiserfs format "3.6" with non-standard journal eiserfs", "/dev/ReiserFS: dm-0: using ordered data mode mapper/mainpartiReiserFS: dm-0: journal params: device dm-0, size 2048, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 tion", "/mnt"], ReiserFS: dm-0: checking transaction log (dm-0) [/* 9 vars */]) = 0 brk(0) = 0x8077000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f2c000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e0f000 mprotect(0xb7f25000, 27924, PROT_NONE) = 0 old_mmap(0xb7f26000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f26000 old_mmap(0xb7f2a000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f2a000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e0e000 mprotect(0xb7f26000, 4096, PROT_READ) = 0 munmap(0xb7f2c000, 1610) = 0 getpid() = 1094 stat64("/etc/busybox.conf", {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 brk(0) = 0x8077000 brk(0x8098000) = 0x8098000 open("/etc/busybox.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f2c000 read(3, "[SUID]\nsu = ssx 0.0\nsulogin = sx"..., 4096) = 38 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7f2c000, 4096) = 0 getuid32() = 0 getgid32() = 0 setgid32(0) = 0 setuid32(0) = 0 lstat64("/dev/mapper/mainpartition", {st_mode=S_IFBLK|0600, st_rdev=makedev(254, 0), ...}) = 0 mount("/dev/mapper/mainpartition", "/mnt", "reiserfs", 0x8000, 0x8077080ReiserFS: dm-0: replayed 14 transactions in 4 seconds ReiserFS: dm-0: Using r5 hash to sort names ) = 0 exit_group(0) = ? Mounting File System---------------------------------------------------------------------[ Done ] Initializing variables-------------------------------------------------------------------[ Done ] Starting PCMCIA--------------------------------------------------------------------------[ Done ] Starting Network-------------------------------------------------------------------------[ Done ] Starting the cloning interface-----------------------------------------------------------[ Done ] Starting the printing subsystem----------------------------------------------------------[ Done ] Starting local services------------------------------------------------------------------[ Done ] Starting custom services-----------------------------------------------------------------[ Done ] Starting the X server--------------------------------------------------------------------Restarting system. Linux version 2.6.21 (root@albrecht.rdi1.com) (gcc version 3.3.3) #3 Mon Aug 27 11:31:08 EDT 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001bef0000 end: 000000001bff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001bff0000 size: 0000000000003000 end: 000000001bff3000 type: 4 copy_e820_map() start: 000000001bff3000 size: 000000000000d000 end: 000000001c000000 type: 3 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114672 early_node_map[1] active PFN ranges 0: 0 -> 114672 DMI 2.2 present. ACPI: RSDP 000F68D0, 0014 (r0 CLE266) ACPI: RSDT 1BFF3040, 0028 (r1 CLE266 AWRDACPI 42302E31 AWRD 0) ACPI: FACP 1BFF30C0, 0074 (r1 CLE266 AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 1BFF3180, 43E2 (r1 CLE266 AWRDACPI 1000 MSFT 100000E) ACPI: FACS 1BFF0000, 0040 Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) Built 1 zonelists. Total pages: 113777 Kernel command line: root=/dev/hda1 vga=791 ide=nodma noinitrd console=ttyS1,9600 console=tty0 ide_setup: ide=nodma : Prevented DMA No local APIC present or hardware disabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 800.373 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 446532k/458688k available (4583k kernel code, 11504k reserved, 2006k data, 248k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB) vmalloc : 0xdc800000 - 0xfffb4000 ( 567 MB) lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB) .init : 0xc0772000 - 0xc07b0000 ( 248 kB) .data : 0xc0579cb0 - 0xc076f6ac (2006 kB) .text : 0xc0100000 - 0xc0579cb0 (4583 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1602.82 BogoMIPS (lpj=3205655) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) Compat vDSO mapped to ffffe000. CPU: Centaur VIA Nehemiah stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 12c0) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa910, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *7 10 11 12) ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22) ACPI: PCI Interrupt Link [ALKD] (IRQs *23) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: iomem range 0xdb000-0xdbfff has been reserved Time: tsc clocksource has been installed. pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved pnp: 00:02: ioport range 0x4000-0x407f has been reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e8000000-ebffffff NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 22k freed audit: initializing netlink socket (disabled) audit(1188309654.640:1): initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu NTFS driver 2.1.28 [Flags: R/W]. fuse init (API version 7.8) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:874b vesafb: pmi: set display start = c00c879c, set palette = c00c87fc vesafb: pmi: ports = b4c3 b503 d403 d503 cc03 d703 d803 d903 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) lp: driver loaded but no devices found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 VIA RNG detected Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected VIA CLE266 chipset agpgart: AGP aperture is 128M @ 0xe0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [drm] Initialized via 2.11.0 20061227 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Time: pit clocksource has been installed. Clocksource tsc unstable (delta = 2060085671 ns) serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ˙serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) via-rhine: Broken BIOS detected, avoid_D3 enabled. via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 eth0: VIA Rhine III at 0xee000000, 00:d0:f8:1b:4f:2a, IRQ 7. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:12.0, from 7 to 12 eth1: VIA Rhine II at 0xee002000, 00:d0:f8:1b:4f:29, IRQ 12. eth1: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 12 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:pio hda: SanDisk SDCFB-1024, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63 hda: hda1 hda2 usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 12, io base 0x0000e100 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 6, io base 0x0000e300 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usblcd usbcore: registered new interface driver usbled usbcore: registered new interface driver uss720 drivers/usb/misc/uss720.c: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip drivers/usb/misc/uss720.c: NOTE: this is a special purpose driver to allow nonstandard drivers/usb/misc/uss720.c: protocols (eg. bitbang) over USS720 usb to parallel cables drivers/usb/misc/uss720.c: If you just want to connect to a printer, use usblp instead PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 Linux telephony interface: v1.00 ixj driver initialized. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-usx2y ALSA device list: #0: VIA 8235 with VIA1612A at 0xe500, irq 6 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3583 buckets, 28664 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation Using IPI Shortcut mode ReiserFS: hda1: warning: read_super_block: found reiserfs format "3.6" with non-standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 512, journal first block 18, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: replayed 9 transactions in 1 seconds ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 248k freed execve("/usr/bin/cryptsetup", ["cryptsetup", "create", "mainpartition", "/dev/hda2"], [/* 9 vars */]) = 0 brk(0) = 0x804e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/lib/i686/libgcrypt.so.11", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/lib/i686", 0xbf8adea8) = -1 ENOENT (No such file or directory) open("/usr/local/lib/libgcrypt.so.11", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1325792, ...}) = 0 old_mmap(NULL, 305924, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f6a000 old_mmap(0xb7fb0000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0xb7fb0000 mprotect(0xbf8ae000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC|0x1000000) = 0 close(3) = 0 open("/usr/local/lib/libnsl.so.1", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f69000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 5\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=92508, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f68000 old_mmap(NULL, 88064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f52000 old_mmap(0xb7f64000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0xb7f64000 old_mmap(0xb7f66000, 6144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f66000 close(3) = 0 open("/usr/local/lib/libgpg-error.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\6\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=44593, ...}) = 0 old_mmap(NULL, 13472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f4e000 old_mmap(0xb7f51000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xb7f51000 close(3) = 0 open("/usr/local/lib/libdevmapper.so.1.01", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libdevmapper.so.1.01", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\22\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0555, st_size=30537, ...}) = 0 old_mmap(NULL, 26904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f47000 old_mmap(0xb7f4c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xb7f4c000 close(3) = 0 open("/usr/local/lib/libpopt.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/libpopt.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\23"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=26836, ...}) = 0 old_mmap(NULL, 29688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f3f000 old_mmap(0xb7f46000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0xb7f46000 close(3) = 0 open("/usr/local/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e22000 mprotect(0xb7f38000, 27924, PROT_NONE) = 0 old_mmap(0xb7f39000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f39000 old_mmap(0xb7f3d000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f3d000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e21000 mprotect(0xb7f39000, 4096, PROT_READ) = 0 munmap(0xb7f69000, 1610) = 0 brk(0) = 0x804e000 brk(0x806f000) = 0x806f000 mlockall(MCL_CURRENT|MCL_FUTURE) = 0 open("/proc/devices", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f69000 read(3, "Character devices:\n 1 mem\n 2 p"..., 1024) = 513 close(3) = 0 munmap(0xb7f69000, 4096) = 0 open("/proc/misc", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f69000 read(3, " 63 device-mapper\n223 uinput\n 1"..., 1024) = 100 close(3) = 0 munmap(0xb7f69000, 4096) = 0 stat64("/dev/mapper/control", 0xbf8ad2d0) = -1 ENOENT (No such file or directory) umask(022) = 022 stat64("/dev/mapper", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 umask(022) = 022 mknod("/dev/mapper/control", S_IFCHR|0600, makedev(10, 63)) = 0 open("/dev/mapper/control", O_RDWR|O_LARGEFILE) = 3 ioctl(3, DM_VERSION, 0x804e338) = 0 ioctl(3, DM_TABLE_STATUS, 0x804e300) = -1 ENXIO (No such device or address) open("/dev/hda2", O_RDONLY|O_LARGEFILE) = 4 ioctl(4, BLKGETSIZE64, 0xbf8ae4c8) = 0 close(4) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf8ae35c) = -1 EINVAL (Invalid argument) read(0, "4", 1) = 1 read(0, "1", 1) = 1 read(0, "3", 1) = 1 read(0, "7", 1) = 1 read(0, "b", 1) = 1 read(0, "6", 1) = 1 read(0, "2", 1) = 1 read(0, "8", 1) = 1 read(0, "8", 1) = 1 read(0, "f", 1) = 1 read(0, "1", 1) = 1 read(0, "3", 1) = 1 read(0, "9", 1) = 1 read(0, "4", 1) = 1 read(0, "b", 1) = 1 read(0, "a", 1) = 1 read(0, "5", 1) = 1 read(0, "f", 1) = 1 read(0, "b", 1) = 1 read(0, "f", 1) = 1 read(0, "8", 1) = 1 read(0, "5", 1) = 1 read(0, "f", 1) = 1 read(0, "7", 1) = 1 read(0, "d", 1) = 1 read(0, "e", 1) = 1 read(0, "b", 1) = 1 read(0, "0", 1) = 1 read(0, "4", 1) = 1 read(0, "3", 1) = 1 read(0, "7", 1) = 1 read(0, "8", 1) = 1 read(0, "\n", 1) = 1 ioctl(3, DM_DEV_CREATE, 0x8052390) = 0 ioctl(3, DM_TABLE_LOAD, 0x8052390) = 0 ioctl(3, DM_DEV_SUSPEND, 0x8052390) = 0 close(3) = 0 stat64("/dev/mapper/mainpartition", 0xbf8ad530) = -1 ENOENT (No such file or directory) umask(0) = 022 mknod("/dev/mapper/mainpartition", S_IFBLK|0600, makedev(254, 0)) = 0 umask(022) = 0 chown32("/dev/mapper/mainpartition", 0, 0) = 0 exit_group(0) = ? execve("/bin/mount", ["mount", "-n", "-t", "reiserfs", "/dev/mapper/mainpartition", "/mnt"], [/* 9 vars */]) = 0 brk(0) = 0x8077000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f27000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e0a000 mprotect(0xb7f20000, 27924, PROT_NONE) = 0 old_mmap(0xb7f21000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f21000 old_mmap(0xb7f25000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f25000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e09000 mprotect(0xb7f21000, 4096, PROT_READ) = 0 munmap(0xb7f27000, 1610) = 0 getpid() = 1078 stat64("/etc/busybox.conf", {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 brk(0) = 0x8077000 brk(0x8098000) = 0x8098000 open("/etc/busybox.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f27000 read(3, "[SUID]\nsu = ssx 0.0\nsulogin = sx"..., 4096) = 38 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7f27000, 4096) = 0 getuid32() = 0 getgid32() = 0 setgid32(0) = 0 setuid32(0) = 0 lstat64("/dev/mapper/mainpartition", {st_mode=S_IFBLK|0600, st_rdev=makedev(254, 0), ...}) = 0 mount("/dev/mapper/mainpartition", "/mnt", "reiserfs", 0x8000, 0x8077080) = -1 EINVAL (Invalid argument) write(2, "mount: ", 7mount: ) = 7 write(2, "mounting /dev/mapper/mainpartiti"..., 49mounting /dev/mapper/mainpartition on /mnt failed) = 49 write(2, "\n", 1 ) = 1 exit_group(-1) = ? mount: mounting /mnt/updates on /updates failed mount: mounting /mnt/vol on /vol failed /etc/rc.d/rc.S1: line 34: /vol/runthinixconf: No such file or directory /proc/splash: No such file or directory unable to open '0' /etc/rc.d/rc.S1: line 39: /vol/system.conf: No such file or directory mount: mounting /mnt/squash on /newos failed umount: cannot umount /vol: Invalid argument umount: cannot umount /updates: Invalid argument pivot_root: pivot_root: No such file or directory unable to open '0' execve("/usr/bin/cryptsetup", ["cryptsetup", "create", "mainpartition", "/dev/hda2"], [/* 9 vars */]) = 0 brk(0) = 0x804e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/lib/i686/libgcrypt.so.11", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/local/lib/i686", 0xbfb2c0e8) = -1 ENOENT (No such file or directory) open("/usr/local/lib/libgcrypt.so.11", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1325792, ...}) = 0 old_mmap(NULL, 305924, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f7e000 old_mmap(0xb7fc4000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0xb7fc4000 mprotect(0xbfb2c000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC|0x1000000) = 0 close(3) = 0 open("/usr/local/lib/libnsl.so.1", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f7d000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 5\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=92508, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7c000 old_mmap(NULL, 88064, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f66000 old_mmap(0xb7f78000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0xb7f78000 old_mmap(0xb7f7a000, 6144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f7a000 close(3) = 0 open("/usr/local/lib/libgpg-error.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\6\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=44593, ...}) = 0 old_mmap(NULL, 13472, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f62000 old_mmap(0xb7f65000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0xb7f65000 close(3) = 0 open("/usr/local/lib/libdevmapper.so.1.01", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libdevmapper.so.1.01", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\22\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0555, st_size=30537, ...}) = 0 old_mmap(NULL, 26904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f5b000 old_mmap(0xb7f60000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0xb7f60000 close(3) = 0 open("/usr/local/lib/libpopt.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/libpopt.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240\23"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=26836, ...}) = 0 old_mmap(NULL, 29688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f53000 old_mmap(0xb7f5a000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0xb7f5a000 close(3) = 0 open("/usr/local/lib/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e36000 mprotect(0xb7f4c000, 27924, PROT_NONE) = 0 old_mmap(0xb7f4d000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f4d000 old_mmap(0xb7f51000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f51000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e35000 mprotect(0xb7f4d000, 4096, PROT_READ) = 0 munmap(0xb7f7d000, 1610) = 0 brk(0) = 0x804e000 brk(0x806f000) = 0x806f000 mlockall(MCL_CURRENT|MCL_FUTURE) = 0 open("/proc/devices", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7d000 read(3, "Character devices:\n 1 mem\n 2 p"..., 1024) = 513 close(3) = 0 munmap(0xb7f7d000, 4096) = 0 open("/proc/misc", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7d000 read(3, " 63 device-mapper\n223 uinput\n 1"..., 1024) = 100 close(3) = 0 munmap(0xb7f7d000, 4096) = 0 stat64("/dev/mapper/control", 0xbfb2b510) = -1 ENOENT (No such file or directory) umask(022) = 022 stat64("/dev/mapper", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 umask(022) = 022 mknod("/dev/mapper/control", S_IFCHR|0600, makedev(10, 63)) = 0 open("/dev/mapper/control", O_RDWR|O_LARGEFILE) = 3 ioctl(3, DM_VERSION, 0x804e338) = 0 ioctl(3, DM_TABLE_STATUS, 0x804e300) = 0 close(3) = 0 write(2, "Command failed", 14Command failed) = 14 write(2, ": File exists\n", 14: File exists ) = 14 exit_group(1) = ? execve("/bin/mount", ["mount", "-n", "-t", "reiserfs", "/dev/mapper/mainpartition", "/mnt"], [/* 9 vars */]) = 0 brk(0) = 0x8077000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1610, ...}) = 0 old_mmap(NULL, 1610, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f94000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 U\1\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1357414, ...}) = 0 old_mmap(NULL, 1166612, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e77000 mprotect(0xb7f8d000, 27924, PROT_NONE) = 0 old_mmap(0xb7f8e000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x116000) = 0xb7f8e000 old_mmap(0xb7f92000, 7444, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f92000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e76000 mprotect(0xb7f8e000, 4096, PROT_READ) = 0 munmap(0xb7f94000, 1610) = 0 getpid() = 1111 stat64("/etc/busybox.conf", {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 brk(0) = 0x8077000 brk(0x8098000) = 0x8098000 open("/etc/busybox.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0600, st_size=38, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f94000 read(3, "[SUID]\nsu = ssx 0.0\nsulogin = sx"..., 4096) = 38 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7f94000, 4096) = 0 getuid32() = 0 getgid32() = 0 setgid32(0) = 0 setuid32(0) = 0 lstat64("/dev/mapper/mainpartition", 0xbfbff8fc) = -1 ENOENT (No such file or directory) mount("/dev/mapper/mainpartition", "/mnt", "reiserfs", 0x8000, 0x8077080) = -1 ENOENT (No such file or directory) write(2, "mount: ", 7mount: ) = 7 write(2, "mounting /dev/mapper/mainpartiti"..., 49mounting /dev/mapper/mainpartition on /mnt failed) = 49 write(2, "\n", 1 ) = 1 exit_group(-1) = ? mount: mounting /mnt/updates on /updates failed mount: mounting /mnt/vol on /vol failed /etc/rc.d/rc.S1: line 34: /vol/runthinixconf: No such file or directory /proc/splash: No such file or directory /etc/rc.d/rc.S1: line 39: /vol/system.conf: No such file or directory unable to open '0' mount: mounting /mnt/squash on /newos failed umount: cannot umount /vol: Invalid argument umount: cannot umount /updates: Invalid argument pivot_root: pivot_root: No such file or directory unable to open '0' execve("/usr/bin/cryptsetup", ["cryptsetup", "create", "mainpartition", "/dev/hda2"], [/* 9 vars */]) = 0 brk(0) = 0x804e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/lib/i686/libgcrypt.so.11", O_RDONLY) = -1 EN˙