Linux version 2.6.19-gentoo-r5 (root@poseidon) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Fri Mar 23 22:03:13 UTC 2007 Command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable) BIOS-e820: 00000000d7fd0000 - 00000000d7fde000 (ACPI data) BIOS-e820: 00000000d7fde000 - 00000000d8000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 0000000100000000 - 0000000128000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 884688) 1 entries of 256 used Entering add_active_range(0, 1048576, 1212416) 2 entries of 256 used end_pfn_map = 1212416 DMI present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f8df0 ACPI: XSDT (v001 A M I OEMXSDT 0x12000629 MSFT 0x00000097) @ 0x00000000d7fd0100 ACPI: FADT (v003 A M I OEMFACP 0x12000629 MSFT 0x00000097) @ 0x00000000d7fd0290 ACPI: MADT (v001 A M I OEMAPIC 0x12000629 MSFT 0x00000097) @ 0x00000000d7fd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x12000629 MSFT 0x00000097) @ 0x00000000d7fd0410 ACPI: OEMB (v001 A M I AMI_OEM 0x12000629 MSFT 0x00000097) @ 0x00000000d7fde040 ACPI: HPET (v001 A M I OEMHPET0 0x12000629 MSFT 0x00000097) @ 0x00000000d7fd4d10 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x00000000d7fd4d50 ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0x00000000d7fd4e60 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x20051117) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 884688) 1 entries of 256 used Entering add_active_range(0, 1048576, 1212416) 2 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1212416 early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 884688 0: 1048576 -> 1212416 On node 0 totalpages: 1048431 DMA zone: 56 pages used for memmap DMA zone: 1003 pages reserved DMA zone: 2940 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 866312 pages, LIFO batch:31 Normal zone: 2240 pages used for memmap Normal zone: 161600 pages, LIFO batch:31 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000d7fd0000 - 00000000d7fde000 Nosave address range: 00000000d7fde000 - 00000000d8000000 Nosave address range: 00000000d8000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 00000000fec01000 Nosave address range: 00000000fec01000 - 00000000fee00000 Nosave address range: 00000000fee00000 - 00000000fef00000 Nosave address range: 00000000fef00000 - 0000000100000000 Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000) PERCPU: Allocating 32960 bytes of per cpu data Built 1 zonelists. Total pages: 1030852 Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized Console: colour dummy device 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ d8000000 size 128 MB CPU 1: aperture @ d8000000 size 128 MB Memory: 4111828k/4849664k available (2595k kernel code, 81484k reserved, 750k data, 228k init) Calibrating delay using timer specific routine.. 4003.68 BogoMIPS (lpj=20018420) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12502066 Detected 12.502 MHz APIC timer. Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.19 BogoMIPS (lpj=20000995) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 2212 stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 635 cycles) Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4000.20 BogoMIPS (lpj=20001047) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 2212 stepping 02 CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1107 cycles) Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 3994.48 BogoMIPS (lpj=19972446) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 2212 stepping 02 CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 72 cycles, maxerr 1110 cycles) Brought up 4 CPUs testing NMI watchdog ... OK. time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. time.c: Detected 2000.331 MHz processor. migration_cost=573 checking if image is initramfs... it is Freeing initrd memory: 4723k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:07.0 PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d8000000 size 131072 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture pnp: 00:0a: ioport range 0xca0-0xcaf has been reserved pnp: 00:0c: ioport range 0xa00-0xa7f has been reserved PCI: Bridge: 0000:00:06.0 IO window: e000-efff MEM window: f9f00000-f9ffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.1 IO window: disabled. MEM window: fa000000-fdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: fa000000-fdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:05:00.1 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered squashfs: version 3.1 (2006/08/19) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler deadline registered (default) PCI: Setting latency timer of device 0000:00:0a.0 to 64 pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:00:0f.0 to 64 pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) Linux agpgart interface v0.101 (c) Dave Jones vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000080000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-STDVD-RAM GSA-H54N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 228k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9efac00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xf9efb000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 2-4: new full speed USB device using ohci_hcd and address 2 usb 2-4: configuration #1 chosen from 1 choice hub 2-4:1.0: USB hub found hub 2-4:1.0: 2 ports detected usb 2-4.1: new full speed USB device using ohci_hcd and address 3 usb 2-4.1: configuration #1 chosen from 1 choice usb 2-4.2: new full speed USB device using ohci_hcd and address 4 usb 2-4.2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-4.1 hiddev96: USB HID v1.10 Device [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:02.0-4.1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance libata version 2.00 loaded. sata_nv 0000:00:05.0: version 2.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:05.0 to 64 ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 21 ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 21 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6, max UDMA/133, 976794112 sectors: LBA48 ata1.00: ata1: dev 0 multi count 1 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xD087 scsi 0:0:0:0: Direct-Access ATA STARDOM V.36.A0B V.36 PQ: 0 ANSI: 5 SCSI device sda: 976794112 512-byte hdwr sectors (500119 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through SCSI device sda: 976794112 512-byte hdwr sectors (500119 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:05.1 to 64 ata3: SATA max UDMA/133 cmd 0xC880 ctl 0xC802 bmdma 0xC080 irq 20 ata4: SATA max UDMA/133 cmd 0xC480 ctl 0xC402 bmdma 0xC088 irq 20 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC887 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC487 ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.2 to 64 ata5: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB480 irq 23 ata6: SATA max UDMA/133 cmd 0xB880 ctl 0xB802 bmdma 0xB488 irq 23 scsi4 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC007 scsi5 : sata_nv ata6: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xB887 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com JFS: nTxBlock = 8192, nTxLock = 65536 Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: limiting speed to UDMA/66 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/66 ata1: EH complete ata1.00: limiting speed to UDMA/44 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/44 ata1: EH complete ata1.00: limiting speed to UDMA/33 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: (BMDMA stat 0x20) ata1.00: tag 0 cmd 0xca Emask 0x2 stat 0x0 err 0x0 (HSM violation) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/33 sd 0:0:0:0: SCSI error: return code = 0x08000002 sda: Current: sense key=0xb ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 254097917 Buffer I/O error on device sda2, logical block 31752199 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752200 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752201 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752202 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752203 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752204 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752205 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752206 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752207 lost page write due to I/O error on sda2 Buffer I/O error on device sda2, logical block 31752208 lost page write due to I/O error on sda2 ata1: EH complete SCSI device sda: 976794112 512-byte hdwr sectors (500119 MB) ReiserFS: sda2: warning: journal-1226: REPLAY FAILURE, fsck required! buffer write failed ReiserFS: sda2: warning: Replay Failure, unable to mount sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through SCSI device sda: 976794112 512-byte hdwr sectors (500119 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed UDF-fs: No partition found (1) XFS: bad magic number XFS: SB validate failed ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset iso8859-1 Unable to load NLS charset iso8859-1 ISO 9660 Extensions: RRIP_1991A Real Time Clock Driver v1.12ac