| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070906211815.GD3081@traven>
Date: Thu, 6 Sep 2007 23:18:15 +0200
From: Matthias Kaehlcke <matthias.kaehlcke@...il.com>
To: gregkh@...e.de, linux-usb-users@...ts.sourceforge.net,
linux-usb-devel@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, akpm@...ux-foundation.org
Subject: [PATCH 1/2] ELAN U132 Host Controller Driver: convert sw_lock to
mutex
The ELAN U132 Host Controller Driver uses the semaphore sw_lock as
mutex. Use the mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@...il.com>
--
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index b88eb3c..1201ca4 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -184,7 +184,7 @@ struct u132_ring {
struct u132 {
struct kref kref;
struct list_head u132_list;
- struct semaphore sw_lock;
+ struct mutex sw_lock;
struct semaphore scheduler_lock;
struct u132_platform_data *board;
struct platform_device *platform_dev;
@@ -493,20 +493,20 @@ static void u132_hcd_monitor_work(struct work_struct *work)
return;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = read_roothub_info(u132);
if (retval) {
struct usb_hcd *hcd = u132_to_hcd(u132);
u132_disable(u132);
u132->going = 1;
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_hc_died(hcd);
ftdi_elan_gone_away(u132->platform_dev);
u132_monitor_put_kref(u132);
return;
} else {
u132_monitor_requeue_work(u132, 500);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
}
@@ -1805,10 +1805,10 @@ static void u132_hcd_stop(struct usb_hcd *hcd)
dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
"ed\n", hcd);
} else {
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(100);
u132_power(u132, 0);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
}
}
@@ -1830,7 +1830,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
(pdev->dev.platform_data))->vendor;
u16 device = ((struct u132_platform_data *)
(pdev->dev.platform_data))->device;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
msleep(10);
if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
u132->flags = OHCI_QUIRK_AMD756;
@@ -1845,7 +1845,7 @@ static int u132_hcd_start(struct usb_hcd *hcd)
u132->going = 1;
}
msleep(100);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
} else {
dev_err(&u132->platform_dev->dev, "platform_device missing\n");
@@ -1865,13 +1865,13 @@ static int u132_hcd_reset(struct usb_hcd *hcd)
return -ESHUTDOWN;
} else {
int retval;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
retval = u132_init(u132);
if (retval) {
u132_disable(u132);
u132->going = 1;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
@@ -2805,7 +2805,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
return -ESHUTDOWN;
} else {
int retval = 0;
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
@@ -2868,7 +2868,7 @@ static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
stall:retval = -EPIPE;
break;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return retval;
}
}
@@ -3004,7 +3004,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
dev_err(&u132->platform_dev->dev, "removing device u132"
".%d\n", u132->sequence_num);
msleep(100);
- down(&u132->sw_lock);
+ mutex_lock(&u132->sw_lock);
u132_monitor_cancel_work(u132);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3017,7 +3017,7 @@ static int __devexit u132_remove(struct platform_device *pdev)
u132->going += 1;
printk(KERN_INFO "removing device u132.%d\n",
u132->sequence_num);
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
usb_remove_hcd(hcd);
u132_u132_put_kref(u132);
return 0;
@@ -3037,7 +3037,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
u132->platform_dev = pdev;
u132->power = 0;
u132->reset = 0;
- init_MUTEX(&u132->sw_lock);
+ mutex_init(&u132->sw_lock);
init_MUTEX(&u132->scheduler_lock);
while (rings-- > 0) {
struct u132_ring *ring = &u132->ring[rings];
@@ -3047,7 +3047,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
ring->curr_endp = NULL;
INIT_DELAYED_WORK(&ring->scheduler,
u132_hcd_ring_work_scheduler);
- } down(&u132->sw_lock);
+ } mutex_lock(&u132->sw_lock);
INIT_DELAYED_WORK(&u132->monitor, u132_hcd_monitor_work);
while (ports-- > 0) {
struct u132_port *port = &u132->port[ports];
@@ -3077,7 +3077,7 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
while (endps-- > 0) {
u132->endp[endps] = NULL;
}
- up(&u132->sw_lock);
+ mutex_unlock(&u132->sw_lock);
return;
}
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
If you don't know where you are going,
you will probably end up somewhere else
(Laurence J. Peter)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists