| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070911084106.54654bd6.randy.dunlap@oracle.com>
Date: Tue, 11 Sep 2007 08:41:06 -0700
From: Randy Dunlap <randy.dunlap@...cle.com>
To: Emil Medve <Emilian.Medve@...escale.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
i2c@...sensors.org, linux-omap-open-source@...ux.omap.com
Subject: Re: [PATCH] Move the definition of pr_err() into kernel.h
On Tue, 11 Sep 2007 09:56:05 -0500 Emil Medve wrote:
> Other pr_*() macros are already defined in kernel.h, but pr_err() was defined
> multiple times in several other places
>
> Signed-off-by: Emil Medve <Emilian.Medve@...escale.com>
> ---
> drivers/i2c/chips/menelaus.c | 10 ++++------
> drivers/net/spider_net.h | 3 ---
> drivers/video/omap/lcd_h3.c | 6 ++----
> drivers/video/omap/lcd_inn1610.c | 6 ++----
> include/linux/kernel.h | 2 ++
> 5 files changed, 10 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
> index d9c92c5..fc5eed4 100644
> --- a/drivers/i2c/chips/menelaus.c
> +++ b/drivers/i2c/chips/menelaus.c
> @@ -49,8 +49,6 @@
>
> #define DRIVER_NAME "menelaus"
>
> -#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
> -
> #define MENELAUS_I2C_ADDRESS 0x72
>
> #define MENELAUS_REV 0x01
> @@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
> int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
>
> if (val < 0) {
> - pr_err("write error");
> + pr_err(DRIVER_NAME ":write error");
Hi,
Please keep the space after the ":" in all cases...
> return val;
> }
>
> @@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
> int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
>
> if (val < 0)
> - pr_err("read error");
> + pr_err(DRIVER_NAME ":read error");
>
> return val;
> }
> @@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
> /* If a true probe check the device */
> rev = menelaus_read_reg(MENELAUS_REV);
> if (rev < 0) {
> - pr_err("device not found");
> + pr_err(DRIVER_NAME ":device not found");
> err = -ENODEV;
> goto fail1;
> }
> @@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
>
> res = i2c_add_driver(&menelaus_i2c_driver);
> if (res < 0) {
> - pr_err("driver registration failed\n");
> + pr_err(DRIVER_NAME ":driver registration failed\n");
> return res;
> }
>
> diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
> index dbbdb8c..c67b11d 100644
> --- a/drivers/net/spider_net.h
> +++ b/drivers/net/spider_net.h
> @@ -493,7 +493,4 @@ struct spider_net_card {
> struct spider_net_descr darray[0];
> };
>
> -#define pr_err(fmt,arg...) \
> - printk(KERN_ERR fmt ,##arg)
> -
> #endif
> diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
> index 51807b4..c81271d 100644
> --- a/drivers/video/omap/lcd_h3.c
> +++ b/drivers/video/omap/lcd_h3.c
> @@ -28,8 +28,6 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
> -
> static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
> {
> return 0;
> @@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
> if (!r)
> r = tps65010_set_gpio_out_value(GPIO2, HIGH);
> if (r)
> - pr_err("Unable to turn on LCD panel\n");
> + pr_err(MODULE_NAME ":Unable to turn on LCD panel\n");
>
> return r;
> }
> @@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
> if (!r)
> tps65010_set_gpio_out_value(GPIO2, LOW);
> if (r)
> - pr_err("Unable to turn off LCD panel\n");
> + pr_err(MODULE_NAME ":Unable to turn off LCD panel\n");
> }
>
> static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
> diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
> index 95604ca..ea85cb9 100644
> --- a/drivers/video/omap/lcd_inn1610.c
> +++ b/drivers/video/omap/lcd_inn1610.c
> @@ -27,20 +27,18 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
> -
> static int innovator1610_panel_init(struct lcd_panel *panel,
> struct omapfb_device *fbdev)
> {
> int r = 0;
>
> if (omap_request_gpio(14)) {
> - pr_err("can't request GPIO 14\n");
> + pr_err(MODULE_NAME ":can't request GPIO 14\n");
> r = -1;
> goto exit;
> }
> if (omap_request_gpio(15)) {
> - pr_err("can't request GPIO 15\n");
> + pr_err(MODULE_NAME ":can't request GPIO 15\n");
> omap_free_gpio(14);
> r = -1;
> goto exit;
> diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> index f592df7..c51936a 100644
> --- a/include/linux/kernel.h
> +++ b/include/linux/kernel.h
> @@ -242,6 +242,8 @@ static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *
>
> #define pr_info(fmt,arg...) \
> printk(KERN_INFO fmt,##arg)
> +#define pr_err(fmt, arg...) \
> + printk(KERN_ERR fmt, ##arg)
>
> /*
> * Display an IP address in readable format.
> --
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists