| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46EBC6E8.7040808@cv-sv.de> Date: Sat, 15 Sep 2007 13:50:00 +0200 From: Christian Volkmann <haveaniceday@...sv.de> To: Andrew Morton <akpm@...ux-foundation.org> CC: linux-kernel@...r.kernel.org, Michal Piotrowski <michal.k.k.piotrowski@...il.com>, linux-usb-devel@...ts.sourceforge.net, haveaniceday@...sv.de Subject: Re: 2.6.23-rc6: usb 1-1: device not accepting address 2, error -62 > Does the machine otherwise work OK? > Yes, the USB is working fine for the easy things I do with it. Hmm, so I expect this 2.6.22 message: >> <6>usb 1-1: USB disconnect, address 2 became this 2.6.23rc6 message: >> <3>usb 1-1: device not accepting address 2, error -62 and nothing is harmed. Andrew Morton wrote: > Let's cc the USB mailing list. > > On Fri, 14 Sep 2007 23:28:23 +0200 Christian Volkmann <haveaniceday@...sv.de> wrote: > >> Hi everybody, >> >> I have an error message with 2.6.23-rc6. >> This did not happen with 2.6.22. > > Another one for Michal's dirt file. > >> The kernel reports message like this: >> <3>usb 1-1: device not accepting address 2, error -62 >> <3>hub 2-2.1:1.0: hub_port_status failed (err = -71) >> >> Does this message harm or is something broken in 2.6.23-rc6 ? >> I get this kind of messages also with 2.6.23-rc3 > > Does the machine otherwise work OK? > > Even if it does, I don't think we should be (newly) spraying scary messages > like that at people. > >> Best regards, >> >> Christian >> >> >> Please see below for: >> >> grep -e hub -e usb boot.msg for a 2.6.23-rc6 boot. (that boot was without (err = -71) >> grep -e hub -e usb boot.msg for a 2.6.22 boot. >> lspci -vnn (2.6.22) >> lsusb -v (2.6.22) >> >> >> 2.6.23-rc6 boot.msg extract ( hub/usb ) >> >> <6>usbcore: registered new interface driver usbfs >> <6>usbcore: registered new interface driver hub >> <6>usbcore: registered new device driver usb >> <6>usb usb1: configuration #1 chosen from 1 choice >> <6>hub 1-0:1.0: USB hub found >> <6>hub 1-0:1.0: 2 ports detected >> <6>usb usb2: configuration #1 chosen from 1 choice >> <6>hub 2-0:1.0: USB hub found >> <6>hub 2-0:1.0: 2 ports detected >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 2 >> <6>usb usb3: configuration #1 chosen from 1 choice >> <6>hub 3-0:1.0: USB hub found >> <6>hub 3-0:1.0: 2 ports detected >> <6>usb usb4: configuration #1 chosen from 1 choice >> <6>hub 4-0:1.0: USB hub found >> <6>hub 4-0:1.0: 6 ports detected >> <6>usb usb5: configuration #1 chosen from 1 choice >> <6>hub 5-0:1.0: USB hub found >> <6>hub 5-0:1.0: 2 ports detected >> <3>usb 1-1: device not accepting address 2, error -62 >> <6>usb 5-2: new full speed USB device using uhci_hcd and address 2 >> <6>usb usb6: configuration #1 chosen from 1 choice >> <6>hub 6-0:1.0: USB hub found >> <6>hub 6-0:1.0: 4 ports detected >> <6>usb usb7: configuration #1 chosen from 1 choice >> <6>hub 7-0:1.0: USB hub found >> <6>hub 7-0:1.0: 2 ports detected >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 4 >> <6>usb 1-1: configuration #1 chosen from 1 choice >> <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 >> <6>usb 2-1: configuration #1 chosen from 1 choice >> <6>usb 6-2: new high speed USB device using ehci_hcd and address 2 >> <6>usb 6-2: configuration #1 chosen from 1 choice >> <6>hub 6-2:1.0: USB hub found >> <6>hub 6-2:1.0: 2 ports detected >> <6>usbcore: registered new interface driver hiddev >> <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 >> <6>usbcore: registered new interface driver usbhid >> <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver >> <7>usb-storage: device found at 2 >> <7>usb-storage: waiting for device to settle before scanning >> <6>usb 6-2.1: new high speed USB device using ehci_hcd and address 3 >> <6>usb 6-2.1: configuration #1 chosen from 1 choice >> <6>hub 6-2.1:1.0: USB hub found >> <6>hub 6-2.1:1.0: 4 ports detected >> <6>usb 6-2.1.1: new high speed USB device using ehci_hcd and address 4 >> <6>usb 6-2.1.1: configuration #1 chosen from 1 choice >> <7>usb-storage: device found at 4 >> <7>usb-storage: waiting for device to settle before scanning >> <6>usbcore: registered new interface driver usb-storage >> <7>usb-storage: device scan complete >> <7>usb-storage: device scan complete >> >> 2.6.22 boot.msg extract ( hub/usb ) >> >> <6>usbcore: registered new interface driver usbfs >> <6>usbcore: registered new interface driver hub >> <6>usbcore: registered new device driver usb >> <6>usb usb1: configuration #1 chosen from 1 choice >> <6>hub 1-0:1.0: USB hub found >> <6>hub 1-0:1.0: 2 ports detected >> <6>usb usb2: configuration #1 chosen from 1 choice >> <6>hub 2-0:1.0: USB hub found >> <6>hub 2-0:1.0: 2 ports detected >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 2 >> <6>usb usb3: configuration #1 chosen from 1 choice >> <6>hub 3-0:1.0: USB hub found >> <6>hub 3-0:1.0: 2 ports detected >> <6>usb 1-1: configuration #1 chosen from 1 choice >> <6>usb usb4: configuration #1 chosen from 1 choice >> <6>hub 4-0:1.0: USB hub found >> <6>hub 4-0:1.0: 6 ports detected >> <6>usb 1-1: USB disconnect, address 2 >> <6>usb usb5: configuration #1 chosen from 1 choice >> <6>hub 5-0:1.0: USB hub found >> <6>hub 5-0:1.0: 4 ports detected >> <6>usb usb6: configuration #1 chosen from 1 choice >> <6>hub 6-0:1.0: USB hub found >> <6>hub 6-0:1.0: 2 ports detected >> <6>usb usb7: configuration #1 chosen from 1 choice >> <6>hub 7-0:1.0: USB hub found >> <6>hub 7-0:1.0: 2 ports detected >> <6>usb 5-2: new high speed USB device using ehci_hcd and address 2 >> <6>usb 5-2: configuration #1 chosen from 1 choice >> <6>hub 5-2:1.0: USB hub found >> <6>hub 5-2:1.0: 2 ports detected >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 3 >> <6>usb 1-1: configuration #1 chosen from 1 choice >> <6>usbcore: registered new interface driver hiddev >> <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 >> <6>usb 2-1: configuration #1 chosen from 1 choice >> <6>usb 5-2.1: new high speed USB device using ehci_hcd and address 3 >> <6>usb 5-2.1: configuration #1 chosen from 1 choice >> <6>hub 5-2.1:1.0: USB hub found >> <6>hub 5-2.1:1.0: 4 ports detected >> <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 >> <7>usb-storage: device found at 2 >> <7>usb-storage: waiting for device to settle before scanning >> <6>usb 5-2.1.1: new high speed USB device using ehci_hcd and address 4 >> <6>usb 5-2.1.1: configuration #1 chosen from 1 choice >> <6>usbcore: registered new interface driver usbhid >> <7>usb-storage: device found at 4 >> <7>usb-storage: waiting for device to settle before scanning >> <6>usbcore: registered new interface driver usb-storage >> <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver >> <7>usb-storage: device scan complete >> <7>usb-storage: device scan complete >> >> [system info snipped ] >> > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists