| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 15 Sep 2007 19:07:06 +0200 From: Christian Volkmann <haveaniceday@...sv.de> To: unlisted-recipients:; (no To-header on input) CC: Alan Stern <stern@...land.harvard.edu>, Andrew Morton <akpm@...ux-foundation.org>, linux-kernel@...r.kernel.org, linux-usb-devel@...ts.sourceforge.net, Michal Piotrowski <michal.k.k.piotrowski@...il.com>, haveaniceday@...sv.de Subject: Re: [linux-usb-devel] 2.6.23-rc6: usb 1-1: device not accepting address 2, error -62 Please see below for the logs with timestamp and usb-debug. Alan Stern wrote: > On Sat, 15 Sep 2007, Christian Volkmann wrote: > >>> Does the machine otherwise work OK? >>> >> Yes, the USB is working fine for the easy things I do with it. >> >> Hmm, so I expect this 2.6.22 message: >>>> <6>usb 1-1: USB disconnect, address 2 >> became this 2.6.23rc6 message: >>>> <3>usb 1-1: device not accepting address 2, error -62 >> and nothing is harmed. > > Maybe. It's hard to tell because you have not provided enough > information. To get a better idea of what's going on you should enable > CONFIG_USB_DEBUG, for both 2.6.22 and 2.6.23, and then post the dmesg > logs. It wouldn't hurt to enable CONFIG_PRINTK_TIME also. > > These sorts of errors can occur because of bad cable connections or > other similar hardware problems. There's an excellent chance they have > no connection to the kernel version. > > Alan Stern > > Boot of 2.6.22 with CONFIG_PRINTK_TIME and CONFIG_USB_DEBUG klogd 1.4.1, log source = ksyslog started. <5>[ 0.000000] Linux version 2.6.22-speedy (root@...edy) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #3 PREEMPT Sat Sep 15 18:43:47 CEST 2007 <6>[ 0.000000] BIOS-provided physical RAM map: <4>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4>[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) <4>[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) <4>[ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) <5>[ 0.000000] 639MB HIGHMEM available. <5>[ 0.000000] 896MB LOWMEM available. <6>[ 0.000000] found SMP MP-table at 000f5980 <7>[ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0 -> 4096 <4>[ 0.000000] Normal 4096 -> 229376 <4>[ 0.000000] HighMem 229376 -> 393200 <4>[ 0.000000] early_node_map[1] active PFN ranges <4>[ 0.000000] 0: 0 -> 393200 <7>[ 0.000000] On node 0 totalpages: 393200 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 4064 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1760 pages used for memmap <7>[ 0.000000] Normal zone: 223520 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 1279 pages used for memmap <7>[ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 <6>[ 0.000000] DMI 2.3 present. <4>[ 0.000000] ACPI: RSDP 000F7350, 0014 (r0 AWARD ) <4>[ 0.000000] ACPI: RSDT 5FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0) <4>[ 0.000000] ACPI: FACP 5FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0) <4>[ 0.000000] ACPI: DSDT 5FFF30C0, 38BB (r1 AWARD AWRDACPI 1000 MSFT 100000D) <4>[ 0.000000] ACPI: FACS 5FFF0000, 0040 <4>[ 0.000000] ACPI: APIC 5FFF6980, 0054 (r1 AWARD AWRDACPI 42302E31 AWRD 0) <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>[ 0.000000] Processor #0 15:2 APIC version 20 <6>[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <4>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <4>[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) <4>[ 0.000000] Built 1 zonelists. Total pages: 390129 <5>[ 0.000000] Kernel command line: root=/dev/hdb7 vga=0x346 resume=/dev/hdb11 splash=verbose console=tty0 crashkernel=64M@16M 3 <7>[ 0.000000] mapped APIC to ffffd000 (fee00000) <7>[ 0.000000] mapped IOAPIC to ffffc000 (fec00000) <6>[ 0.000000] Enabling fast FPU save and restore... done. <6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done. <6>[ 0.000000] Initializing CPU#0 <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) <4>[ 0.000000] Detected 2672.804 MHz processor. <4>[ 18.872274] Console: colour dummy device 80x25 <4>[ 18.873050] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>[ 18.873822] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 18.922125] Memory: 1490032k/1572800k available (1742k kernel code, 81424k reserved, 662k data, 196k init, 655296k highmem) <4>[ 18.922147] virtual kernel memory layout: <4>[ 18.922148] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) <4>[ 18.922149] pkmap : 0xff800000 - 0xffc00000 (4096 kB) <4>[ 18.922151] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) <4>[ 18.922152] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <4>[ 18.922153] .init : 0xc125c000 - 0xc128d000 ( 196 kB) <4>[ 18.922155] .data : 0xc11b38f3 - 0xc1259484 ( 662 kB) <4>[ 18.922156] .text : 0xc1000000 - 0xc11b38f3 (1742 kB) <4>[ 18.922169] Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>[ 19.002291] Calibrating delay using timer specific routine.. 5349.25 BogoMIPS (lpj=10698513) <6>[ 19.002337] Security Framework v1.0.0 initialized <4>[ 19.002358] Mount-cache hash table entries: 512 <7>[ 19.002502] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 <6>[ 19.002514] CPU: Trace cache: 12K uops, L1 D cache: 8K <6>[ 19.002519] CPU: L2 cache: 512K <7>[ 19.002523] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000400 00000000 00000000 <6>[ 19.002530] Intel machine check architecture supported. <6>[ 19.002536] Intel machine check reporting enabled on CPU#0. <6>[ 19.002540] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>[ 19.002545] CPU0: Thermal monitoring enabled <4>[ 19.002554] Compat vDSO mapped to ffffe000. <4>[ 19.002568] CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07 <6>[ 19.002577] Checking 'hlt' instruction... OK. <6>[ 19.018378] ACPI: Core revision 20070126 <4>[ 19.127629] ENABLING IO-APIC IRQs <6>[ 19.127803] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 19.274383] NET: Registered protocol family 16 <6>[ 19.274494] ACPI: bus type pci registered <6>[ 19.313809] PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1 <6>[ 19.313813] PCI: Using configuration type 1 <4>[ 19.313816] Setting up standard PCI resources <6>[ 19.324546] ACPI: Interpreter enabled <6>[ 19.324556] ACPI: (supports S0 S3 S4 S5) <6>[ 19.324578] ACPI: Using IOAPIC for interrupt routing <6>[ 19.329173] ACPI: PCI Root Bridge [PCI0] (0000:00) <7>[ 19.329191] PCI: Probing PCI hardware (bus 00) <6>[ 19.329479] Enabling SiS 96x SMBus. <7>[ 19.331073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>[ 19.352987] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>[ 19.353097] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>[ 19.353208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) <4>[ 19.353316] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>[ 19.353420] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>[ 19.353525] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>[ 19.353631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>[ 19.353734] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) <6>[ 19.353835] Linux Plug and Play Support v0.97 (c) Adam Belay <6>[ 19.353852] pnp: PnP ACPI init <6>[ 19.353862] ACPI: bus type pnp registered <6>[ 19.355941] pnp: PnP ACPI: found 11 devices <6>[ 19.355947] ACPI: ACPI bus type pnp unregistered <6>[ 19.355954] PnPBIOS: Disabled by ACPI PNP <6>[ 19.356032] PCI: Using ACPI for IRQ routing <6>[ 19.356037] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>[ 19.372489] pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved <6>[ 19.372495] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved <6>[ 19.372499] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved <6>[ 19.372503] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved <6>[ 19.374201] Time: tsc clocksource has been installed. <6>[ 19.402836] PCI: Bridge: 0000:00:01.0 <6>[ 19.402840] IO window: disabled. <6>[ 19.402850] MEM window: e0000000-e1ffffff <6>[ 19.402857] PREFETCH window: d8000000-dfffffff <6>[ 19.402901] NET: Registered protocol family 2 <4>[ 19.442210] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>[ 19.442382] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>[ 19.443552] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 19.443951] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 19.443956] TCP reno registered <6>[ 19.454365] checking if image is initramfs... it is <6>[ 19.685765] Freeing initrd memory: 2802k freed <6>[ 19.685969] Machine check exception polling timer started. <6>[ 19.686000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) <5>[ 19.686004] apm: overridden by ACPI. <6>[ 19.686257] audit: initializing netlink socket (disabled) <5>[ 19.686277] audit(1189882148.244:1): initialized <4>[ 19.686356] highmem bounce pool size: 64 pages <4>[ 19.686362] Total HugeTLB memory allocated, 0 <5>[ 19.686423] VFS: Disk quotas dquot_6.5.1 <4>[ 19.686436] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 19.686513] io scheduler noop registered <6>[ 19.686517] io scheduler anticipatory registered <6>[ 19.686520] io scheduler deadline registered <6>[ 19.686533] io scheduler cfq registered (default) <7>[ 19.770100] pci 0000:00:07.0: uhci_check_and_reset_hc: legsup = 0x2000 <7>[ 19.770102] pci 0000:00:07.0: Performing full reset <7>[ 19.770120] pci 0000:00:07.1: uhci_check_and_reset_hc: legsup = 0x2000 <7>[ 19.770122] pci 0000:00:07.1: Performing full reset <7>[ 19.770150] Boot video device is 0000:01:00.0 <6>[ 19.770391] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 7500k, total 131072k <6>[ 19.770398] vesafb: mode is 1600x1200x16, linelength=3200, pages=1 <6>[ 19.770402] vesafb: protected mode interface info at c000:def0 <6>[ 19.770406] vesafb: pmi: set display start = c00cdf35, set palette = c00cdfba <6>[ 19.770409] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 <6>[ 19.770432] vesafb: scrolling: redraw <6>[ 19.770436] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>[ 19.836587] Console: switching to colour frame buffer device 200x75 <6>[ 19.902936] fb0: VESA VGA frame buffer device <6>[ 19.903209] isapnp: Scanning for PnP cards... <6>[ 19.930043] Switched to NOHz mode on CPU #0 <6>[ 20.213994] isapnp: No Plug & Play device found <6>[ 20.220984] Real Time Clock Driver v1.12ac <6>[ 20.221309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>[ 20.222217] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 20.222695] Floppy drive(s): fd0 is 1.44M <6>[ 20.241646] FDC 0 is a post-1991 82077 <4>[ 20.243357] RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>[ 20.243912] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>[ 20.244563] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 20.244824] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 20.245210] mice: PS/2 mouse device common for all mice <6>[ 20.278974] input: AT Translated Set 2 keyboard as /class/input/input0 <6>[ 20.289144] input: PC Speaker as /class/input/input1 <6>[ 20.930810] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 <6>[ 20.935659] NET: Registered protocol family 1 <4>[ 20.935886] Using IPI Shortcut mode <6>[ 20.936533] Freeing unused kernel memory: 196k freed <6>[ 21.227423] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>[ 21.227764] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>[ 21.245864] ACPI: Thermal Zone [THRM] (47 C) <6>[ 21.250555] SIS5513: IDE controller at PCI slot 0000:00:02.5 <6>[ 21.250889] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 <6>[ 21.251289] SIS5513: chipset revision 0 <6>[ 21.251486] SIS5513: not 100% native mode: will probe irqs later <6>[ 21.251809] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller <6>[ 21.252128] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA <6>[ 21.252530] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA <7>[ 21.252926] Probing IDE interface ide0... <4>[ 21.541611] hda: ST3120023A, ATA DISK drive <4>[ 21.821506] hdb: SAMSUNG SP2514N, ATA DISK drive <7>[ 21.877534] hda: selected mode 0x45 <7>[ 21.894893] hdb: selected mode 0x45 <4>[ 21.911444] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>[ 21.920761] hda: max request size: 128KiB <6>[ 21.921180] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <6>[ 21.921781] hda: cache flushes supported <6>[ 21.922023] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > <6>[ 21.994408] hdb: max request size: 512KiB <6>[ 21.994750] hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) <6>[ 22.008117] hdb: cache flushes supported <6>[ 22.008376] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 > <7>[ 22.156505] Probing IDE interface ide1... <4>[ 22.893122] hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive <4>[ 23.692825] hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive <7>[ 23.765512] hdc: selected mode 0x42 <7>[ 23.766684] hdd: selected mode 0x42 <4>[ 23.766850] ide1 at 0x170-0x177,0x376 on irq 15 <6>[ 23.796256] ACPI: Fan [FAN] (on) <6>[ 23.817791] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <4>[ 24.071685] swsusp: Basic memory bitmaps created <4>[ 24.113309] swsusp: Basic memory bitmaps freed <4>[ 24.145965] Attempting manual resume <6>[ 24.317018] kjournald starting. Commit interval 5 seconds <6>[ 24.333326] EXT3 FS on hdb7, internal journal <6>[ 24.349502] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 27.119629] lp: driver loaded but no devices found <6>[ 28.527222] Linux agpgart interface v0.102 (c) Dave Jones <6>[ 28.689557] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>[ 28.736517] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0 <6>[ 28.773762] hdc: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33) <6>[ 28.790484] Uniform CD-ROM driver Revision: 3.20 <6>[ 28.808164] agpgart: Detected SiS chipset - id:1608 <6>[ 28.832562] agpgart: AGP aperture is 128M @ 0xd0000000 <6>[ 28.856063] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) <6>[ 28.878911] usbcore: registered new interface driver usbfs <6>[ 28.895484] usbcore: registered new interface driver hub <6>[ 28.911912] usbcore: registered new device driver usb <6>[ 28.948719] ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17 <6>[ 29.016935] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2020000-e20207ff] Max Packet=[2048] IR/IT contexts=[4/6] <7>[ 29.035665] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <7>[ 29.035669] ohci_hcd: block sizes: ed 64 td 64 <6>[ 29.045019] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18 <6>[ 29.061902] ohci_hcd 0000:00:03.0: OHCI Host Controller <6>[ 29.078652] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 <7>[ 29.095312] ohci_hcd 0000:00:03.0: created debug files <6>[ 29.095323] ohci_hcd 0000:00:03.0: irq 18, io mem 0xe2021000 <7>[ 29.113398] ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 <6>[ 29.114643] USB Universal Host Controller Interface driver v3.0 <7>[ 29.169233] ohci_hcd 0000:00:03.0: OHCI controller state <7>[ 29.169240] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers <7>[ 29.169244] ohci_hcd 0000:00:03.0: control 0x083 HCFS=operational CBSR=3 <7>[ 29.169248] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0 <7>[ 29.169251] ohci_hcd 0000:00:03.0: intrstatus 0x00000044 RHSC SF <7>[ 29.169255] ohci_hcd 0000:00:03.0: intrenable 0x8000000a MIE RD WDH <7>[ 29.169261] ohci_hcd 0000:00:03.0: hcca frame #0003 <7>[ 29.169266] ohci_hcd 0000:00:03.0: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 29.169270] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 29.169274] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE <7>[ 29.169279] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS <7>[ 29.169283] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS <7>[ 29.169307] usb usb1: default language 0x0409 <7>[ 29.169315] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 29.169318] usb usb1: Product: OHCI Host Controller <6>[ 29.185890] usb usb1: Manufacturer: Linux 2.6.22-speedy ohci_hcd <6>[ 29.202783] usb usb1: SerialNumber: 0000:00:03.0 <7>[ 29.219533] usb usb1: uevent <7>[ 29.219553] usb usb1: usb_probe_device <6>[ 29.219618] usb usb1: configuration #1 chosen from 1 choice <7>[ 29.236354] usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>[ 29.236366] usb 1-0:1.0: uevent <7>[ 29.236370] usb 1-0:1.0: uevent <7>[ 29.236382] hub 1-0:1.0: usb_probe_interface <7>[ 29.236384] hub 1-0:1.0: usb_probe_interface - got id <6>[ 29.236387] hub 1-0:1.0: USB hub found <6>[ 29.253193] hub 1-0:1.0: 2 ports detected <7>[ 29.270135] hub 1-0:1.0: standalone hub <7>[ 29.270138] hub 1-0:1.0: no power switching (usb 1.0) <7>[ 29.270140] hub 1-0:1.0: no over-current protection <7>[ 29.270143] hub 1-0:1.0: power on to power good time: 2ms <7>[ 29.270149] hub 1-0:1.0: local power source is good <7>[ 29.270153] hub 1-0:1.0: trying to enable port power on non-switchable hub <6>[ 29.344199] sis900.c: v1.08.10 Apr. 2 2006 <7>[ 29.371190] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 29.371289] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS <7>[ 29.371297] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s <6>[ 29.371333] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19 <6>[ 29.388672] ohci_hcd 0000:00:03.1: OHCI Host Controller <6>[ 29.406003] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 <7>[ 29.423513] ohci_hcd 0000:00:03.1: created debug files <6>[ 29.423523] ohci_hcd 0000:00:03.1: irq 19, io mem 0xe2022000 <7>[ 29.497167] ohci_hcd 0000:00:03.1: OHCI controller state <7>[ 29.497174] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers <7>[ 29.497178] ohci_hcd 0000:00:03.1: control 0x083 HCFS=operational CBSR=3 <7>[ 29.497181] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0 <7>[ 29.497185] ohci_hcd 0000:00:03.1: intrstatus 0x00000044 RHSC SF <7>[ 29.497189] ohci_hcd 0000:00:03.1: intrenable 0x8000000a MIE RD WDH <7>[ 29.497195] ohci_hcd 0000:00:03.1: hcca frame #0003 <7>[ 29.497199] ohci_hcd 0000:00:03.1: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 29.497203] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 29.497207] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE <7>[ 29.497212] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00010101 CSC PPS CCS <7>[ 29.497217] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS <7>[ 29.497238] usb usb2: default language 0x0409 <7>[ 29.497246] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 29.497250] usb usb2: Product: OHCI Host Controller <7>[ 29.514516] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 <6>[ 29.514527] usb usb2: Manufacturer: Linux 2.6.22-speedy ohci_hcd <6>[ 29.531733] usb usb2: SerialNumber: 0000:00:03.1 <7>[ 29.548846] usb usb2: uevent <7>[ 29.548865] usb usb2: usb_probe_device <6>[ 29.548911] usb usb2: configuration #1 chosen from 1 choice <7>[ 29.565986] usb usb2: adding 2-0:1.0 (config #1, interface 0) <7>[ 29.565998] usb 2-0:1.0: uevent <7>[ 29.566001] usb 2-0:1.0: uevent <7>[ 29.566012] hub 2-0:1.0: usb_probe_interface <7>[ 29.566014] hub 2-0:1.0: usb_probe_interface - got id <6>[ 29.566017] hub 2-0:1.0: USB hub found <6>[ 29.582872] hub 2-0:1.0: 2 ports detected <7>[ 29.599493] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <7>[ 29.599498] hub 2-0:1.0: standalone hub <7>[ 29.599500] hub 2-0:1.0: no power switching (usb 1.0) <7>[ 29.599503] hub 2-0:1.0: no over-current protection <7>[ 29.599506] hub 2-0:1.0: power on to power good time: 2ms <7>[ 29.599511] hub 2-0:1.0: local power source is good <7>[ 29.599515] hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 29.638785] Linux video capture interface: v2.00 <6>[ 29.655430] usb 1-1: new low speed USB device using ohci_hcd and address 2 <6>[ 29.703221] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20 <6>[ 29.720114] ohci_hcd 0000:00:03.2: OHCI Host Controller <6>[ 29.736975] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 <7>[ 29.753911] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <7>[ 29.753926] ohci_hcd 0000:00:03.2: created debug files <6>[ 29.753936] ohci_hcd 0000:00:03.2: irq 20, io mem 0xe2023000 <6>[ 29.777186] saa7130/34: v4l2 driver version 0.2.14 loaded <7>[ 29.827036] ohci_hcd 0000:00:03.2: enabling initreset quirk <7>[ 29.829035] ohci_hcd 0000:00:03.2: OHCI controller state <7>[ 29.829039] ohci_hcd 0000:00:03.2: OHCI 1.0, NO legacy support registers <7>[ 29.829043] ohci_hcd 0000:00:03.2: control 0x083 HCFS=operational CBSR=3 <7>[ 29.829046] ohci_hcd 0000:00:03.2: cmdstatus 0x00000 SOC=0 <7>[ 29.829050] ohci_hcd 0000:00:03.2: intrstatus 0x00000004 SF <7>[ 29.829054] ohci_hcd 0000:00:03.2: intrenable 0x8000004a MIE RHSC RD WDH <7>[ 29.829060] ohci_hcd 0000:00:03.2: hcca frame #0003 <7>[ 29.829065] ohci_hcd 0000:00:03.2: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 29.829068] ohci_hcd 0000:00:03.2: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 29.829072] ohci_hcd 0000:00:03.2: roothub.status 00008000 DRWE <7>[ 29.829076] ohci_hcd 0000:00:03.2: roothub.portstatus [0] 0x00000100 PPS <7>[ 29.829080] ohci_hcd 0000:00:03.2: roothub.portstatus [1] 0x00000100 PPS <7>[ 29.829095] usb usb3: default language 0x0409 <7>[ 29.829103] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 29.829106] usb usb3: Product: OHCI Host Controller <6>[ 29.846075] usb usb3: Manufacturer: Linux 2.6.22-speedy ohci_hcd <6>[ 29.863230] usb usb3: SerialNumber: 0000:00:03.2 <7>[ 29.880478] usb usb3: uevent <7>[ 29.880499] usb usb3: usb_probe_device <6>[ 29.880544] usb usb3: configuration #1 chosen from 1 choice <7>[ 29.897969] usb 1-1: skipped 1 descriptor after interface <7>[ 29.897979] usb usb3: adding 3-0:1.0 (config #1, interface 0) <7>[ 29.897991] usb 3-0:1.0: uevent <7>[ 29.897995] usb 3-0:1.0: uevent <7>[ 29.898007] hub 3-0:1.0: usb_probe_interface <7>[ 29.898009] hub 3-0:1.0: usb_probe_interface - got id <6>[ 29.898012] hub 3-0:1.0: USB hub found <6>[ 29.915524] hub 3-0:1.0: 2 ports detected <7>[ 29.932956] usb 1-1: default language 0x0409 <7>[ 29.932961] hub 3-0:1.0: standalone hub <7>[ 29.932963] hub 3-0:1.0: no power switching (usb 1.0) <7>[ 29.932966] hub 3-0:1.0: no over-current protection <7>[ 29.932969] hub 3-0:1.0: power on to power good time: 2ms <7>[ 29.932974] hub 3-0:1.0: local power source is good <7>[ 29.932977] hub 3-0:1.0: trying to enable port power on non-switchable hub <7>[ 29.935868] usb 1-1: new device strings: Mfr=0, Product=2, SerialNumber=0 <6>[ 29.935872] usb 1-1: Product: USB Optical Mouse <7>[ 29.953324] usb 1-1: uevent <7>[ 29.953338] usb 1-1: usb_probe_device <6>[ 29.953377] usb 1-1: configuration #1 chosen from 1 choice <7>[ 29.972852] usb 1-1: adding 1-1:1.0 (config #1, interface 0) <7>[ 29.972873] usb 1-1:1.0: uevent <7>[ 29.972876] usb 1-1:1.0: uevent <7>[ 29.972945] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 29.972951] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 29.972957] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS <7>[ 29.972962] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s <6>[ 30.034746] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21 <6>[ 30.054608] ehci_hcd 0000:00:03.3: EHCI Host Controller <6>[ 30.072347] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 <7>[ 30.090141] ehci_hcd 0000:00:03.3: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 <7>[ 30.090146] ehci_hcd 0000:00:03.3: reset hcc_params 7070 thresh 7 uframes 1024 <7>[ 30.090187] PCI: cache line size of 128 is not supported by device 0000:00:03.3 <7>[ 30.090190] ehci_hcd 0000:00:03.3: supports USB remote wakeup <6>[ 30.090200] ehci_hcd 0000:00:03.3: irq 21, io mem 0xe2024000 <7>[ 30.107916] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <7>[ 30.107944] ehci_hcd 0000:00:03.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 30.107952] ehci_hcd 0000:00:03.3: init command 010001 (park)=0 ithresh=1 period=1024 RUN <6>[ 30.107957] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <7>[ 30.125785] usb usb4: default language 0x0409 <7>[ 30.125793] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.125796] usb usb4: Product: EHCI Host Controller <6>[ 30.143765] usb usb4: Manufacturer: Linux 2.6.22-speedy ehci_hcd <6>[ 30.161728] usb usb4: SerialNumber: 0000:00:03.3 <7>[ 30.179546] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00130100 PRSC PESC CSC PPS <7>[ 30.179558] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 30.179575] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 30.179580] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS <7>[ 30.179585] hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s <6>[ 30.179588] usb 1-1: USB disconnect, address 2 <7>[ 30.197112] usb 1-1: unregistering device <7>[ 30.197114] usb 1-1: usb_disable_device nuking all URBs <7>[ 30.197119] usb 1-1: unregistering interface 1-1:1.0 <7>[ 30.197158] usb_endpoint usbdev1.2_ep81: ep_device_release called for usbdev1.2_ep81 <7>[ 30.197176] usb 1-1:1.0: uevent <7>[ 30.197180] usb 1-1:1.0: uevent <7>[ 30.197234] usb_endpoint usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00 <7>[ 30.197250] usb 1-1: uevent <7>[ 30.197291] usb usb4: uevent <7>[ 30.197303] usb usb4: usb_probe_device <6>[ 30.197340] usb usb4: configuration #1 chosen from 1 choice <7>[ 30.214898] usb usb4: adding 4-0:1.0 (config #1, interface 0) <7>[ 30.214910] usb 4-0:1.0: uevent <7>[ 30.214913] usb 4-0:1.0: uevent <7>[ 30.214925] hub 4-0:1.0: usb_probe_interface <7>[ 30.214927] hub 4-0:1.0: usb_probe_interface - got id <6>[ 30.214930] hub 4-0:1.0: USB hub found <6>[ 30.232332] hub 4-0:1.0: 6 ports detected <7>[ 30.249621] hub 4-0:1.0: standalone hub <7>[ 30.249623] hub 4-0:1.0: no power switching (usb 1.0) <7>[ 30.249626] hub 4-0:1.0: individual port over-current protection <7>[ 30.249629] hub 4-0:1.0: Single TT <7>[ 30.249632] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 30.249635] hub 4-0:1.0: power on to power good time: 20ms <7>[ 30.249640] hub 4-0:1.0: local power source is good <7>[ 30.249642] hub 4-0:1.0: trying to enable port power on non-switchable hub <7>[ 30.326909] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 <7>[ 30.326918] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 30.326925] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS <7>[ 30.326932] hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s <7>[ 30.330998] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ecc82] <6>[ 30.351035] ACPI: PCI Interrupt 0000:00:07.2[C] -> GSI 16 (level, low) -> IRQ 16 <6>[ 30.368610] ehci_hcd 0000:00:07.2: EHCI Host Controller <6>[ 30.386138] ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 5 <7>[ 30.403788] ehci_hcd 0000:00:07.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 <7>[ 30.403793] ehci_hcd 0000:00:07.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 <7>[ 30.403843] ehci_hcd 0000:00:07.2: MWI active <7>[ 30.403846] ehci_hcd 0000:00:07.2: supports USB remote wakeup <6>[ 30.403857] ehci_hcd 0000:00:07.2: irq 16, io mem 0xe2026000 <7>[ 30.421321] ehci_hcd 0000:00:07.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 30.421328] ehci_hcd 0000:00:07.2: init command 010009 (park)=0 ithresh=1 period=256 RUN <6>[ 30.421332] ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <7>[ 30.438860] usb usb5: default language 0x0409 <7>[ 30.438869] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.438871] usb usb5: Product: EHCI Host Controller <6>[ 30.456350] usb usb5: Manufacturer: Linux 2.6.22-speedy ehci_hcd <7>[ 30.474023] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 <7>[ 30.474029] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 <7>[ 30.474035] ehci_hcd 0000:00:03.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT <7>[ 30.474042] hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s <6>[ 30.474047] usb usb5: SerialNumber: 0000:00:07.2 <7>[ 30.491714] usb usb5: uevent <7>[ 30.491731] usb usb5: usb_probe_device <6>[ 30.491771] usb usb5: configuration #1 chosen from 1 choice <7>[ 30.509491] usb usb5: adding 5-0:1.0 (config #1, interface 0) <7>[ 30.509510] usb 5-0:1.0: uevent <7>[ 30.509513] usb 5-0:1.0: uevent <7>[ 30.509526] hub 5-0:1.0: usb_probe_interface <7>[ 30.509528] hub 5-0:1.0: usb_probe_interface - got id <6>[ 30.509530] hub 5-0:1.0: USB hub found <6>[ 30.527246] hub 5-0:1.0: 4 ports detected <7>[ 30.544503] hub 5-0:1.0: standalone hub <7>[ 30.544506] hub 5-0:1.0: no power switching (usb 1.0) <7>[ 30.544508] hub 5-0:1.0: individual port over-current protection <7>[ 30.544511] hub 5-0:1.0: Single TT <7>[ 30.544514] hub 5-0:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 30.544517] hub 5-0:1.0: power on to power good time: 20ms <7>[ 30.544521] hub 5-0:1.0: local power source is good <7>[ 30.544524] hub 5-0:1.0: trying to enable port power on non-switchable hub <7>[ 30.606807] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 <7>[ 30.606818] ehci_hcd 0000:00:03.3: port 1 low speed --> companion <6>[ 30.647256] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 22 <7>[ 30.664457] ehci_hcd 0000:00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC <7>[ 30.664479] ehci_hcd 0000:00:03.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT <7>[ 30.664486] hub 4-0:1.0: port 2, status 0501, change 0001, 480 Mb/s <6>[ 30.664503] uhci_hcd 0000:00:07.0: UHCI Host Controller <6>[ 30.681636] uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 6 <6>[ 30.698836] uhci_hcd 0000:00:07.0: detected 2 ports <7>[ 30.715817] uhci_hcd 0000:00:07.0: uhci_check_and_reset_hc: cmd = 0x0000 <7>[ 30.715820] uhci_hcd 0000:00:07.0: Performing full reset <6>[ 30.715843] uhci_hcd 0000:00:07.0: irq 22, io base 0x0000e000 <7>[ 30.732755] usb usb6: default language 0x0409 <7>[ 30.732764] usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.732766] usb usb6: Product: UHCI Host Controller <6>[ 30.749603] usb usb6: Manufacturer: Linux 2.6.22-speedy uhci_hcd <6>[ 30.766528] usb usb6: SerialNumber: 0000:00:07.0 <7>[ 30.783459] usb usb6: uevent <7>[ 30.783476] usb usb6: usb_probe_device <6>[ 30.783521] usb usb6: configuration #1 chosen from 1 choice <7>[ 30.800325] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 <7>[ 30.800354] usb usb6: adding 6-0:1.0 (config #1, interface 0) <7>[ 30.800366] usb 6-0:1.0: uevent <7>[ 30.800370] usb 6-0:1.0: uevent <7>[ 30.800383] hub 6-0:1.0: usb_probe_interface <7>[ 30.800386] hub 6-0:1.0: usb_probe_interface - got id <6>[ 30.800388] hub 6-0:1.0: USB hub found <6>[ 30.816995] hub 6-0:1.0: 2 ports detected <7>[ 30.833658] hub 6-0:1.0: standalone hub <7>[ 30.833660] hub 6-0:1.0: no power switching (usb 1.0) <7>[ 30.833662] hub 6-0:1.0: individual port over-current protection <7>[ 30.833665] hub 6-0:1.0: power on to power good time: 2ms <7>[ 30.833669] hub 6-0:1.0: local power source is good <7>[ 30.833671] hub 6-0:1.0: trying to enable port power on non-switchable hub <7>[ 30.854760] ehci_hcd 0000:00:03.3: port 2 full speed --> companion <7>[ 30.854767] ehci_hcd 0000:00:03.3: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT <7>[ 30.854804] hub 4-0:1.0: port 2 not reset yet, waiting 50ms <7>[ 30.910744] ehci_hcd 0000:00:03.3: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC <7>[ 30.910773] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0004 <7>[ 30.910779] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 30.910786] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS <7>[ 30.910791] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s <6>[ 30.934870] ACPI: PCI Interrupt 0000:00:07.1[B] -> GSI 19 (level, low) -> IRQ 23 <6>[ 30.952065] uhci_hcd 0000:00:07.1: UHCI Host Controller <6>[ 30.969096] uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 7 <6>[ 30.985900] uhci_hcd 0000:00:07.1: detected 2 ports <7>[ 31.002313] uhci_hcd 0000:00:07.1: uhci_check_and_reset_hc: cmd = 0x0000 <7>[ 31.002316] uhci_hcd 0000:00:07.1: Performing full reset <6>[ 31.002341] uhci_hcd 0000:00:07.1: irq 23, io base 0x0000e400 <7>[ 31.018683] usb usb7: default language 0x0409 <7>[ 31.018691] usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 31.018694] usb usb7: Product: UHCI Host Controller <6>[ 31.034963] usb usb7: Manufacturer: Linux 2.6.22-speedy uhci_hcd <7>[ 31.051281] ohci_hcd 0000:00:03.2: auto-stop root hub <7>[ 31.051301] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 <6>[ 31.051311] usb usb7: SerialNumber: 0000:00:07.1 <7>[ 31.067657] usb usb7: uevent <7>[ 31.067677] usb usb7: usb_probe_device <6>[ 31.067720] usb usb7: configuration #1 chosen from 1 choice <7>[ 31.083828] usb usb7: adding 7-0:1.0 (config #1, interface 0) <7>[ 31.083844] usb 7-0:1.0: uevent <7>[ 31.083847] usb 7-0:1.0: uevent <7>[ 31.083860] hub 7-0:1.0: usb_probe_interface <7>[ 31.083862] hub 7-0:1.0: usb_probe_interface - got id <6>[ 31.083865] hub 7-0:1.0: USB hub found <6>[ 31.099887] hub 7-0:1.0: 2 ports detected <7>[ 31.115812] hub 7-0:1.0: standalone hub <7>[ 31.115814] hub 7-0:1.0: no power switching (usb 1.0) <7>[ 31.115816] hub 7-0:1.0: individual port over-current protection <7>[ 31.115819] hub 7-0:1.0: power on to power good time: 2ms <7>[ 31.115824] hub 7-0:1.0: local power source is good <7>[ 31.115827] hub 7-0:1.0: trying to enable port power on non-switchable hub <7>[ 31.122650] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <6>[ 31.177917] usb 1-1: new low speed USB device using ohci_hcd and address 3 <6>[ 31.218426] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>[ 31.237948] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 23 <6>[ 31.255618] 0000:00:04.0: Unknown PHY transceiver found at address 0. <7>[ 31.272206] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <6>[ 31.272978] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. <6>[ 31.290291] 0000:00:04.0: Unknown PHY transceiver found at address 2. <6>[ 31.307539] 0000:00:04.0: Unknown PHY transceiver found at address 3. <6>[ 31.324593] 0000:00:04.0: Unknown PHY transceiver found at address 4. <6>[ 31.341488] 0000:00:04.0: Unknown PHY transceiver found at address 5. <6>[ 31.358180] 0000:00:04.0: Unknown PHY transceiver found at address 6. <6>[ 31.378415] 0000:00:04.0: Unknown PHY transceiver found at address 7. <6>[ 31.394854] 0000:00:04.0: Unknown PHY transceiver found at address 8. <6>[ 31.411146] 0000:00:04.0: Unknown PHY transceiver found at address 9. <6>[ 31.427198] 0000:00:04.0: Unknown PHY transceiver found at address 10. <7>[ 31.442426] usb 1-1: skipped 1 descriptor after interface <6>[ 31.443205] 0000:00:04.0: Unknown PHY transceiver found at address 11. <7>[ 31.458399] usb 1-1: default language 0x0409 <6>[ 31.459175] 0000:00:04.0: Unknown PHY transceiver found at address 12. <7>[ 31.474089] usb 1-1: new device strings: Mfr=0, Product=2, SerialNumber=0 <6>[ 31.474093] usb 1-1: Product: USB Optical Mouse <7>[ 31.488807] usb 1-1: uevent <7>[ 31.488828] usb 1-1: usb_probe_device <6>[ 31.488879] usb 1-1: configuration #1 chosen from 1 choice <6>[ 31.504175] 0000:00:04.0: Unknown PHY transceiver found at address 13. <7>[ 31.518833] usb 1-1: adding 1-1:1.0 (config #1, interface 0) <7>[ 31.518851] usb 1-1:1.0: uevent <7>[ 31.518855] usb 1-1:1.0: uevent <7>[ 31.518918] hub 5-0:1.0: state 7 ports 4 chg 0000 evt 0000 <7>[ 31.518930] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT <7>[ 31.518936] hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s <6>[ 31.519711] 0000:00:04.0: Unknown PHY transceiver found at address 14. <6>[ 31.534966] 0000:00:04.0: Unknown PHY transceiver found at address 15. <6>[ 31.550016] 0000:00:04.0: Unknown PHY transceiver found at address 16. <6>[ 31.565382] 0000:00:04.0: Unknown PHY transceiver found at address 17. <6>[ 31.580101] 0000:00:04.0: Unknown PHY transceiver found at address 18. <6>[ 31.594673] 0000:00:04.0: Unknown PHY transceiver found at address 19. <6>[ 31.609072] 0000:00:04.0: Unknown PHY transceiver found at address 20. <6>[ 31.623301] 0000:00:04.0: Unknown PHY transceiver found at address 21. <6>[ 31.637460] 0000:00:04.0: Unknown PHY transceiver found at address 22. <6>[ 31.651491] 0000:00:04.0: Unknown PHY transceiver found at address 23. <6>[ 31.665379] 0000:00:04.0: Unknown PHY transceiver found at address 24. <7>[ 31.678226] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 <6>[ 31.679009] 0000:00:04.0: Unknown PHY transceiver found at address 25. <6>[ 31.692332] 0000:00:04.0: Unknown PHY transceiver found at address 26. <6>[ 31.705493] 0000:00:04.0: Unknown PHY transceiver found at address 27. <6>[ 31.718497] 0000:00:04.0: Unknown PHY transceiver found at address 28. <6>[ 31.731333] 0000:00:04.0: Unknown PHY transceiver found at address 29. <7>[ 31.743328] ehci_hcd 0000:00:07.2: port 2 high speed <7>[ 31.743333] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT <6>[ 31.744102] 0000:00:04.0: Unknown PHY transceiver found at address 30. <6>[ 31.756484] 0000:00:04.0: Unknown PHY transceiver found at address 31. <6>[ 31.791907] 0000:00:04.0: Using transceiver found at address 1 as default <6>[ 31.803445] usb 5-2: new high speed USB device using ehci_hcd and address 2 <6>[ 31.816112] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 23, 00:10:dc:c5:f1:83. <6>[ 31.828648] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22 <7>[ 31.870682] ehci_hcd 0000:00:07.2: port 2 high speed <7>[ 31.870689] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT <7>[ 31.946802] usb 5-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 31.946846] usb 5-2: uevent <7>[ 31.946869] usb 5-2: usb_probe_device <6>[ 31.946916] usb 5-2: configuration #1 chosen from 1 choice <7>[ 31.959553] usb 5-2: adding 5-2:1.0 (config #1, interface 0) <7>[ 31.959577] usb 5-2:1.0: uevent <7>[ 31.959581] usb 5-2:1.0: uevent <7>[ 31.959598] hub 5-2:1.0: usb_probe_interface <7>[ 31.959600] hub 5-2:1.0: usb_probe_interface - got id <6>[ 31.959603] hub 5-2:1.0: USB hub found <6>[ 31.972044] hub 5-2:1.0: 2 ports detected <7>[ 31.984146] hub 5-2:1.0: compound device; port removable status: FR <7>[ 31.984149] hub 5-2:1.0: ganged power switching <7>[ 31.984151] hub 5-2:1.0: global over-current protection <7>[ 31.984153] hub 5-2:1.0: Single TT <7>[ 31.984155] hub 5-2:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 31.984161] hub 5-2:1.0: power on to power good time: 100ms <7>[ 31.984414] hub 5-2:1.0: local power source is good <7>[ 31.984417] hub 5-2:1.0: no over-current condition exists <7>[ 31.984420] hub 5-2:1.0: enabling power on all ports <7>[ 32.086353] usb 5-2: link qh256-0001/c5f3e100 start 255 [1/0 us] <7>[ 32.086479] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 32.086488] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS <7>[ 32.086493] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s <6>[ 32.086517] usbcore: registered new interface driver hiddev <6>[ 32.162333] intel8x0_measure_ac97_clock: measured 52676 usecs <6>[ 32.174473] intel8x0: clocking to 48000 <6>[ 32.186724] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 23 <6>[ 32.198917] saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 23, latency: 32, mmio: 0xe2027000 <6>[ 32.211353] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] <7>[ 32.223909] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <6>[ 32.232264] saa7134[0]: board init: gpio is 0 <7>[ 32.298279] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS <6>[ 32.354258] usb 2-1: new full speed USB device using ohci_hcd and address 3 <6>[ 32.390255] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 <6>[ 32.403241] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 <6>[ 32.416115] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 32.429065] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <7>[ 32.441774] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS <6>[ 32.441780] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 32.454366] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 32.466746] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 32.478972] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 32.506206] saa7134[0] Tuner type is 38 <7>[ 32.518027] usb 2-1: ep0 maxpacket = 8 <7>[ 32.528660] usb 2-1: default language 0x0409 <7>[ 32.537660] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 32.537664] usb 2-1: Product: Medion Flash XL V3.0C <6>[ 32.549438] usb 2-1: Manufacturer: MEDION <6>[ 32.561308] usb 2-1: SerialNumber: 2003-02 <7>[ 32.572931] usb 2-1: uevent <7>[ 32.572955] usb 2-1: usb_probe_device <6>[ 32.573012] usb 2-1: configuration #1 chosen from 1 choice <7>[ 32.588650] usb 2-1: adding 2-1:1.0 (config #1, interface 0) <7>[ 32.588692] usb 2-1:1.0: uevent <7>[ 32.588696] usb 2-1:1.0: uevent <7>[ 32.591779] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0006 <7>[ 32.591792] uhci_hcd 0000:00:07.0: port 1 portsc 008a,00 <7>[ 32.591802] hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s <6>[ 32.634204] tuner 1-0043: chip found @ 0x86 (saa7134[0]) <6>[ 32.645840] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) <4>[ 32.674167] tuner 1-0060: All bytes are equal. It is not a TEA5767 <6>[ 32.685974] tuner 1-0060: chip found @ 0xc0 (saa7134[0]) <6>[ 32.697676] tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) <6>[ 32.709449] tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) <6>[ 32.723373] saa7134[0]: registered device video0 [v4l2] <7>[ 32.735064] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 <7>[ 32.735071] uhci_hcd 0000:00:07.0: port 2 portsc 008a,00 <7>[ 32.735080] hub 6-0:1.0: port 2, status 0100, change 0003, 12 Mb/s <6>[ 32.735104] saa7134[0]: registered device vbi0 <6>[ 32.746601] saa7134[0]: registered device radio0 <7>[ 32.862116] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 <7>[ 32.862125] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 32.862134] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0006 <7>[ 32.862141] uhci_hcd 0000:00:07.1: port 1 portsc 008a,00 <7>[ 32.862150] hub 7-0:1.0: port 1, status 0100, change 0003, 12 Mb/s <5>[ 32.913919] SCSI subsystem initialized <7>[ 32.990088] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 <7>[ 32.990097] uhci_hcd 0000:00:07.1: port 2 portsc 008a,00 <7>[ 32.990106] hub 7-0:1.0: port 2, status 0100, change 0003, 12 Mb/s <6>[ 33.014319] Initializing USB Mass Storage driver... <3>[ 33.045021] saa7134[0]/dvb: frontend initialization failed <7>[ 33.121200] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 <7>[ 33.121209] hub 5-2:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 33.121235] usbhid 1-1:1.0: usb_probe_interface <7>[ 33.121238] usbhid 1-1:1.0: usb_probe_interface - got id <7>[ 33.121450] hub 5-2:1.0: port 1, status 0101, change 0001, 12 Mb/s <6>[ 33.126508] input: USB Optical Mouse as /class/input/input3 <6>[ 33.137731] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 <7>[ 33.249304] hub 5-2:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <6>[ 33.321165] usb 5-2.1: new high speed USB device using ehci_hcd and address 3 <7>[ 33.345159] hub 5-2:1.0: port 1 not reset yet, waiting 10ms <7>[ 33.437393] usb 5-2.1: new device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 33.437428] usb 5-2.1: uevent <7>[ 33.437445] usb 5-2.1: usb_probe_device <6>[ 33.437502] usb 5-2.1: configuration #1 chosen from 1 choice <7>[ 33.449395] usb 5-2.1: adding 5-2.1:1.0 (config #1, interface 0) <7>[ 33.449418] usb 5-2.1:1.0: uevent <7>[ 33.449422] usb 5-2.1:1.0: uevent <7>[ 33.449440] hub 5-2.1:1.0: usb_probe_interface <7>[ 33.449442] hub 5-2.1:1.0: usb_probe_interface - got id <6>[ 33.449445] hub 5-2.1:1.0: USB hub found <6>[ 33.461388] hub 5-2.1:1.0: 4 ports detected <7>[ 33.473182] hub 5-2.1:1.0: compound device; port removable status: FRRR <7>[ 33.473184] hub 5-2.1:1.0: ganged power switching <7>[ 33.473187] hub 5-2.1:1.0: global over-current protection <7>[ 33.473441] hub 5-2.1:1.0: TT per port <7>[ 33.473444] hub 5-2.1:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 33.473447] hub 5-2.1:1.0: power on to power good time: 100ms <7>[ 33.473634] hub 5-2.1:1.0: local power source is good <7>[ 33.473637] hub 5-2.1:1.0: no over-current condition exists <7>[ 33.473639] hub 5-2.1:1.0: enabling power on all ports <7>[ 33.577043] usb 5-2.1: link qh256-0001/c5f3e200 start 255 [1/0 us] <7>[ 33.577255] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 33.577265] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 33.577268] hub 5-2.1:1.0: state 7 ports 4 chg 0000 evt 0000 <7>[ 33.577291] usb-storage 2-1:1.0: usb_probe_interface <7>[ 33.577298] usb-storage 2-1:1.0: usb_probe_interface - got id <6>[ 33.577391] scsi0 : SCSI emulation for USB Mass Storage devices <7>[ 33.589562] hub 5-2.1:1.0: port 1, status 0101, change 0001, 12 Mb/s <7>[ 33.589622] usb-storage: device found at 3 <7>[ 33.589625] usb-storage: waiting for device to settle before scanning <7>[ 33.717091] hub 5-2.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <6>[ 33.789078] usb 5-2.1.1: new high speed USB device using ehci_hcd and address 4 <7>[ 33.821069] hub 5-2.1:1.0: port 1 not reset yet, waiting 10ms <7>[ 33.933300] usb 5-2.1.1: skipped 1 descriptor after endpoint <7>[ 33.940545] usb 5-2.1.1: default language 0x0409 <7>[ 33.979789] usb 5-2.1.1: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 33.979792] usb 5-2.1.1: Product: Flash Card Reader <6>[ 33.992351] usb 5-2.1.1: Manufacturer: Generic <7>[ 34.004823] usb usb6: suspend_rh (auto-stop) <6>[ 34.004838] usb 5-2.1.1: SerialNumber: 26020128B005 <7>[ 34.017449] usb usb7: suspend_rh (auto-stop) <7>[ 34.017498] usb 5-2.1.1: uevent <7>[ 34.017519] usb 5-2.1.1: usb_probe_device <6>[ 34.017579] usb 5-2.1.1: configuration #1 chosen from 1 choice <7>[ 34.030406] usb 5-2.1.1: adding 5-2.1.1:1.0 (config #1, interface 0) <7>[ 34.030422] usb 5-2.1.1:1.0: uevent <7>[ 34.030426] usb 5-2.1.1:1.0: uevent <7>[ 34.030906] hub 5-2.1:1.0: state 7 ports 4 chg 0000 evt 0002 <6>[ 34.031542] usbcore: registered new interface driver usbhid <6>[ 34.044775] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <7>[ 34.057930] usb-storage 5-2.1.1:1.0: usb_probe_interface <7>[ 34.057936] usb-storage 5-2.1.1:1.0: usb_probe_interface - got id <6>[ 34.057987] scsi1 : SCSI emulation for USB Mass Storage devices <7>[ 34.071131] usb-storage: device found at 4 <7>[ 34.071134] usb-storage: waiting for device to settle before scanning <6>[ 34.071152] usbcore: registered new interface driver usb-storage <6>[ 34.084240] USB Mass Storage support registered. <6>[ 34.411494] Adding 27189972k swap on /dev/hdb11. Priority:-1 extents:1 across:27189972k <4>[ 34.619907] fuse init (API version 7.8) <6>[ 35.742131] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@...hat.com <5>[ 38.629647] scsi 0:0:0:0: Direct-Access Medion Flash XL CF 3.0C PQ: 0 ANSI: 0 CCS <5>[ 38.651420] scsi 0:0:0:1: Direct-Access Medion Flash XL MS 3.0C PQ: 0 ANSI: 0 CCS <5>[ 38.673632] scsi 0:0:0:2: Direct-Access Medion Flash XL MMC/SD 3.0C PQ: 0 ANSI: 0 CCS <5>[ 38.680436] scsi 0:0:0:3: Direct-Access Medion Flash XL SM 3.0C PQ: 0 ANSI: 0 CCS <7>[ 38.718908] usb-storage: device scan complete <5>[ 38.859617] sd 0:0:0:0: [sda] Attached SCSI removable disk <5>[ 38.886919] sd 0:0:0:1: [sdb] Attached SCSI removable disk <5>[ 38.915016] sd 0:0:0:2: [sdc] Attached SCSI removable disk <5>[ 39.051675] sd 0:0:0:3: [sdd] Attached SCSI removable disk <5>[ 39.080275] scsi 1:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 <5>[ 39.101133] sd 1:0:0:0: [sde] Attached SCSI removable disk <5>[ 39.121756] scsi 1:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 <6>[ 39.142494] loop: module loaded <5>[ 39.160980] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 39.178094] sd 0:0:0:1: Attached scsi generic sg1 type 0 <5>[ 39.195142] sd 0:0:0:2: Attached scsi generic sg2 type 0 <5>[ 39.212070] sd 0:0:0:3: Attached scsi generic sg3 type 0 <5>[ 39.228703] sd 1:0:0:0: Attached scsi generic sg4 type 0 <5>[ 39.245147] sd 1:0:0:1: [sdf] Attached SCSI removable disk <5>[ 39.261436] sd 1:0:0:1: Attached scsi generic sg5 type 0 <7>[ 39.278102] usb-storage: device scan complete <6>[ 39.402085] kjournald starting. Commit interval 5 seconds <6>[ 39.418471] EXT3 FS on hdb8, internal journal <6>[ 39.440739] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 39.483405] kjournald starting. Commit interval 5 seconds <6>[ 39.499780] EXT3 FS on hdb9, internal journal <6>[ 39.516054] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 39.569724] kjournald starting. Commit interval 5 seconds <6>[ 39.586305] EXT3 FS on hdb10, internal journal <6>[ 39.602611] EXT3-fs: mounted filesystem with ordered data mode. <7>[ 39.685810] ISO 9660 Extensions: Microsoft Joliet Level 3 <7>[ 39.741211] ISO 9660 Extensions: RRIP_1991A <6>[ 39.796165] SGI XFS with ACLs, security attributes, realtime, no debug enabled <6>[ 39.813088] SGI XFS Quota Management subsystem <5>[ 39.896628] XFS mounting filesystem hdb12 <7>[ 39.999452] Ending clean XFS mount for filesystem: hdb12 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sat Sep 15 18:49:09 2007 Boot of 2.6.23rc6 with CONFIG_PRINTK_TIME and CONFIG_USB_DEBUG klogd 1.4.1, log source = ksyslog started. <5>[ 0.000000] Linux version 2.6.23-rc6-speedy (root@...edy) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #2 PREEMPT Sat Sep 15 18:44:45 CEST 2007 <6>[ 0.000000] BIOS-provided physical RAM map: <4>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4>[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) <4>[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) <4>[ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) <5>[ 0.000000] 639MB HIGHMEM available. <5>[ 0.000000] 896MB LOWMEM available. <6>[ 0.000000] found SMP MP-table at 000f5980 <7>[ 0.000000] Entering add_active_range(0, 0, 393200) 0 entries of 256 used <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0 -> 4096 <4>[ 0.000000] Normal 4096 -> 229376 <4>[ 0.000000] HighMem 229376 -> 393200 <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[1] active PFN ranges <4>[ 0.000000] 0: 0 -> 393200 <7>[ 0.000000] On node 0 totalpages: 393200 <7>[ 0.000000] DMA zone: 32 pages used for memmap <7>[ 0.000000] DMA zone: 0 pages reserved <7>[ 0.000000] DMA zone: 4064 pages, LIFO batch:0 <7>[ 0.000000] Normal zone: 1760 pages used for memmap <7>[ 0.000000] Normal zone: 223520 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 1279 pages used for memmap <7>[ 0.000000] HighMem zone: 162545 pages, LIFO batch:31 <7>[ 0.000000] Movable zone: 0 pages used for memmap <6>[ 0.000000] DMI 2.3 present. <4>[ 0.000000] ACPI: RSDP 000F7350, 0014 (r0 AWARD ) <4>[ 0.000000] ACPI: RSDT 5FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0) <4>[ 0.000000] ACPI: FACP 5FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0) <4>[ 0.000000] ACPI: DSDT 5FFF30C0, 38BB (r1 AWARD AWRDACPI 1000 MSFT 100000D) <4>[ 0.000000] ACPI: FACS 5FFF0000, 0040 <4>[ 0.000000] ACPI: APIC 5FFF6980, 0054 (r1 AWARD AWRDACPI 42302E31 AWRD 0) <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x1008 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>[ 0.000000] Processor #0 15:2 APIC version 20 <6>[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <4>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <4>[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) <4>[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 <4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 <4>[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 <4>[ 0.000000] Built 1 zonelists in Zone order. Total pages: 390129 <5>[ 0.000000] Kernel command line: root=/dev/hdb7 vga=0x346 resume=/dev/hdb11 splash=verbose console=tty0 crashkernel=64M@16M 3 <7>[ 0.000000] mapped APIC to ffffb000 (fee00000) <7>[ 0.000000] mapped IOAPIC to ffffa000 (fec00000) <6>[ 0.000000] Enabling fast FPU save and restore... done. <6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done. <6>[ 0.000000] Initializing CPU#0 <4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) <4>[ 0.000000] Detected 2672.794 MHz processor. <4>[ 16.900420] Console: colour dummy device 80x25 <6>[ 16.900425] console [tty0] enabled <6>[ 16.901192] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 16.901971] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 16.951370] Memory: 1490028k/1572800k available (1740k kernel code, 81432k reserved, 672k data, 196k init, 655296k highmem) <4>[ 16.951391] virtual kernel memory layout: <4>[ 16.951393] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) <4>[ 16.951394] pkmap : 0xff800000 - 0xffc00000 (4096 kB) <4>[ 16.951395] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) <4>[ 16.951397] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <4>[ 16.951398] .init : 0xc125e000 - 0xc128f000 ( 196 kB) <4>[ 16.951399] .data : 0xc11b3206 - 0xc125b564 ( 672 kB) <4>[ 16.951400] .text : 0xc1000000 - 0xc11b3206 (1740 kB) <4>[ 16.951418] Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>[ 17.031546] Calibrating delay using timer specific routine.. 5349.30 BogoMIPS (lpj=10698619) <6>[ 17.031596] Security Framework v1.0.0 initialized <4>[ 17.031618] Mount-cache hash table entries: 512 <7>[ 17.031766] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 00000000 <6>[ 17.031779] CPU: Trace cache: 12K uops, L1 D cache: 8K <6>[ 17.031783] CPU: L2 cache: 512K <7>[ 17.031786] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000400 00000000 00000000 00000000 <6>[ 17.031793] Intel machine check architecture supported. <6>[ 17.031799] Intel machine check reporting enabled on CPU#0. <6>[ 17.031803] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>[ 17.031808] CPU0: Thermal monitoring enabled <4>[ 17.031817] Compat vDSO mapped to ffffe000. <4>[ 17.031830] CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07 <6>[ 17.031839] Checking 'hlt' instruction... OK. <6>[ 17.047750] ACPI: Core revision 20070126 <4>[ 17.155150] ENABLING IO-APIC IRQs <6>[ 17.155322] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 17.299758] NET: Registered protocol family 16 <6>[ 17.299975] ACPI: bus type pci registered <6>[ 17.339368] PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1 <6>[ 17.339373] PCI: Using configuration type 1 <4>[ 17.339376] Setting up standard PCI resources <7>[ 17.348254] ACPI: EC: Look up EC in DSDT <6>[ 17.351549] ACPI: Interpreter enabled <6>[ 17.351557] ACPI: (supports S0 S3) <6>[ 17.351576] ACPI: Using IOAPIC for interrupt routing <6>[ 17.356558] ACPI: PCI Root Bridge [PCI0] (0000:00) <6>[ 17.356855] Enabling SiS 96x SMBus. <7>[ 17.358446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>[ 17.381947] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <6>[ 17.382070] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <6>[ 17.382181] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) <6>[ 17.382292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <6>[ 17.382399] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <6>[ 17.382517] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <6>[ 17.382627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <6>[ 17.382734] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) <6>[ 17.382871] Linux Plug and Play Support v0.97 (c) Adam Belay <6>[ 17.382908] pnp: PnP ACPI init <6>[ 17.382921] ACPI: bus type pnp registered <6>[ 17.385176] pnp: PnP ACPI: found 11 devices <6>[ 17.385182] ACPI: ACPI bus type pnp unregistered <6>[ 17.385189] PnPBIOS: Disabled by ACPI PNP <6>[ 17.385432] PCI: Using ACPI for IRQ routing <6>[ 17.385438] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>[ 17.411448] Time: tsc clocksource has been installed. <6>[ 17.419490] pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved <6>[ 17.419496] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved <6>[ 17.419501] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved <6>[ 17.419505] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved <6>[ 17.449881] PCI: Bridge: 0000:00:01.0 <6>[ 17.449886] IO window: disabled. <6>[ 17.449896] MEM window: e0000000-e1ffffff <6>[ 17.449904] PREFETCH window: d8000000-dfffffff <6>[ 17.449949] NET: Registered protocol family 2 <6>[ 17.487459] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 17.487630] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 17.488802] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 17.489195] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 17.489201] TCP reno registered <6>[ 17.499608] checking if image is initramfs... it is <6>[ 17.731599] Freeing initrd memory: 2802k freed <6>[ 17.731859] Machine check exception polling timer started. <6>[ 17.731889] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) <5>[ 17.731894] apm: overridden by ACPI. <6>[ 17.732247] audit: initializing netlink socket (disabled) <5>[ 17.732268] audit(1189882252.576:1): initialized <4>[ 17.732360] highmem bounce pool size: 64 pages <4>[ 17.732365] Total HugeTLB memory allocated, 0 <6>[ 17.732506] io scheduler noop registered <6>[ 17.732510] io scheduler anticipatory registered <6>[ 17.732513] io scheduler deadline registered <6>[ 17.732525] io scheduler cfq registered (default) <7>[ 17.815344] pci 0000:00:07.0: uhci_check_and_reset_hc: legsup = 0x2000 <7>[ 17.815347] pci 0000:00:07.0: Performing full reset <7>[ 17.815364] pci 0000:00:07.1: uhci_check_and_reset_hc: legsup = 0x2000 <7>[ 17.815367] pci 0000:00:07.1: Performing full reset <7>[ 17.815395] Boot video device is 0000:01:00.0 <6>[ 17.815683] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 7500k, total 131072k <6>[ 17.815691] vesafb: mode is 1600x1200x16, linelength=3200, pages=1 <6>[ 17.815695] vesafb: protected mode interface info at c000:def0 <6>[ 17.815699] vesafb: pmi: set display start = c00cdf35, set palette = c00cdfba <6>[ 17.815703] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 <6>[ 17.815725] vesafb: scrolling: redraw <6>[ 17.815730] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>[ 17.881948] Console: switching to colour frame buffer device 200x75 <6>[ 17.948327] fb0: VESA VGA frame buffer device <6>[ 17.948624] isapnp: Scanning for PnP cards... <6>[ 17.975278] Switched to NOHz mode on CPU #0 <6>[ 18.259227] isapnp: No Plug & Play device found <6>[ 18.266523] Real Time Clock Driver v1.12ac <6>[ 18.266847] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>[ 18.267355] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 18.268169] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>[ 18.268661] Floppy drive(s): fd0 is 1.44M <6>[ 18.286905] FDC 0 is a post-1991 82077 <4>[ 18.288703] RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>[ 18.289277] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>[ 18.289930] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 18.290189] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 18.290609] mice: PS/2 mouse device common for all mice <6>[ 18.323758] input: AT Translated Set 2 keyboard as /class/input/input0 <6>[ 18.332551] input: PC Speaker as /class/input/input1 <6>[ 18.974061] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 <6>[ 18.978850] NET: Registered protocol family 1 <4>[ 18.979085] Using IPI Shortcut mode <6>[ 18.979705] Freeing unused kernel memory: 196k freed <6>[ 19.294594] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>[ 19.294945] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>[ 19.318427] ACPI: Thermal Zone [THRM] (46 C) <6>[ 19.325069] SIS5513: IDE controller at PCI slot 0000:00:02.5 <6>[ 19.325410] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 <6>[ 19.325814] SIS5513: chipset revision 0 <6>[ 19.326016] SIS5513: not 100% native mode: will probe irqs later <6>[ 19.326349] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller <6>[ 19.326669] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA <6>[ 19.327083] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA <7>[ 19.327479] Probing IDE interface ide0... <4>[ 19.614934] hda: ST3120023A, ATA DISK drive <4>[ 19.894731] hdb: SAMSUNG SP2514N, ATA DISK drive <7>[ 19.950794] hda: selected mode 0x45 <7>[ 19.963687] hdb: selected mode 0x45 <4>[ 19.980228] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>[ 19.989612] hda: max request size: 128KiB <6>[ 19.990047] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <6>[ 19.990666] hda: cache flushes supported <6>[ 19.990904] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > <6>[ 20.082750] hdb: max request size: 512KiB <6>[ 20.098815] hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) <6>[ 20.101746] hdb: cache flushes supported <6>[ 20.102026] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 > <7>[ 20.259090] Probing IDE interface ide1... <4>[ 21.010319] hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive <4>[ 21.810021] hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive <7>[ 21.882711] hdc: selected mode 0x42 <7>[ 21.883906] hdd: selected mode 0x42 <4>[ 21.884072] ide1 at 0x170-0x177,0x376 on irq 15 <6>[ 21.913490] ACPI: Fan [FAN] (on) <6>[ 21.953538] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found <4>[ 22.106255] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 <4>[ 22.106260] swsusp: Basic memory bitmaps created <4>[ 22.114449] swsusp: Basic memory bitmaps freed <4>[ 22.122212] Attempting manual resume <6>[ 22.246776] kjournald starting. Commit interval 5 seconds <6>[ 22.246906] EXT3 FS on hdb7, internal journal <6>[ 22.246916] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 25.074963] lp: driver loaded but no devices found <6>[ 26.811082] Linux agpgart interface v0.102 <6>[ 26.866255] ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17 <6>[ 26.965764] sis900.c: v1.08.10 Apr. 2 2006 <6>[ 26.990844] usbcore: registered new interface driver usbfs <6>[ 27.014306] usbcore: registered new interface driver hub <6>[ 27.050902] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>[ 27.073691] usbcore: registered new device driver usb <6>[ 27.105311] Linux video capture interface: v2.00 <7>[ 27.133379] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <7>[ 27.133384] ohci_hcd: block sizes: ed 64 td 64 <6>[ 27.136391] USB Universal Host Controller Interface driver v3.0 <6>[ 27.229568] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2020000-e20207ff] Max Packet=[2048] IR/IT contexts=[4/6] <6>[ 27.261581] agpgart: Detected SiS chipset - id:1608 <7>[ 27.288172] ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 <6>[ 27.303726] agpgart: AGP aperture is 128M @ 0xd0000000 <6>[ 27.324070] hdc: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33) <6>[ 27.345841] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 18 <6>[ 27.364215] 0000:00:04.0: Unknown PHY transceiver found at address 0. <6>[ 27.381688] Uniform CD-ROM driver Revision: 3.20 <6>[ 27.400492] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. <6>[ 27.424810] saa7130/34: v4l2 driver version 0.2.14 loaded <6>[ 27.442837] 0000:00:04.0: Unknown PHY transceiver found at address 2. <6>[ 27.462589] 0000:00:04.0: Unknown PHY transceiver found at address 3. <6>[ 27.480102] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) <6>[ 27.498391] 0000:00:04.0: Unknown PHY transceiver found at address 4. <6>[ 27.516848] 0000:00:04.0: Unknown PHY transceiver found at address 5. <6>[ 27.542732] 0000:00:04.0: Unknown PHY transceiver found at address 6. <6>[ 27.560964] 0000:00:04.0: Unknown PHY transceiver found at address 7. <6>[ 27.578869] 0000:00:04.0: Unknown PHY transceiver found at address 8. <6>[ 27.596762] 0000:00:04.0: Unknown PHY transceiver found at address 9. <6>[ 27.616704] 0000:00:04.0: Unknown PHY transceiver found at address 10. <6>[ 27.634504] 0000:00:04.0: Unknown PHY transceiver found at address 11. <6>[ 27.651702] 0000:00:04.0: Unknown PHY transceiver found at address 12. <6>[ 27.704083] 0000:00:04.0: Unknown PHY transceiver found at address 13. <6>[ 27.720734] 0000:00:04.0: Unknown PHY transceiver found at address 14. <6>[ 27.737118] 0000:00:04.0: Unknown PHY transceiver found at address 15. <6>[ 27.753185] 0000:00:04.0: Unknown PHY transceiver found at address 16. <6>[ 27.768970] 0000:00:04.0: Unknown PHY transceiver found at address 17. <6>[ 27.784510] 0000:00:04.0: Unknown PHY transceiver found at address 18. <6>[ 27.799790] 0000:00:04.0: Unknown PHY transceiver found at address 19. <6>[ 27.814879] 0000:00:04.0: Unknown PHY transceiver found at address 20. <6>[ 27.829800] 0000:00:04.0: Unknown PHY transceiver found at address 21. <6>[ 27.844565] 0000:00:04.0: Unknown PHY transceiver found at address 22. <6>[ 27.859231] 0000:00:04.0: Unknown PHY transceiver found at address 23. <6>[ 27.873651] 0000:00:04.0: Unknown PHY transceiver found at address 24. <6>[ 27.887825] 0000:00:04.0: Unknown PHY transceiver found at address 25. <6>[ 27.901995] 0000:00:04.0: Unknown PHY transceiver found at address 26. <6>[ 27.916161] 0000:00:04.0: Unknown PHY transceiver found at address 27. <6>[ 27.930315] 0000:00:04.0: Unknown PHY transceiver found at address 28. <6>[ 27.944171] 0000:00:04.0: Unknown PHY transceiver found at address 29. <6>[ 27.957830] 0000:00:04.0: Unknown PHY transceiver found at address 30. <6>[ 27.971472] 0000:00:04.0: Unknown PHY transceiver found at address 31. <6>[ 28.008127] 0000:00:04.0: Using transceiver found at address 1 as default <6>[ 28.021973] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 18, 00:10:dc:c5:f1:83. <6>[ 28.035056] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 <6>[ 28.048115] ohci_hcd 0000:00:03.0: OHCI Host Controller <6>[ 28.061139] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 <7>[ 28.074419] ohci_hcd 0000:00:03.0: created debug files <6>[ 28.074431] ohci_hcd 0000:00:03.0: irq 19, io mem 0xe2021000 <7>[ 28.141497] ohci_hcd 0000:00:03.0: OHCI controller state <7>[ 28.141501] ohci_hcd 0000:00:03.0: OHCI 1.0, NO legacy support registers <7>[ 28.141505] ohci_hcd 0000:00:03.0: control 0x083 HCFS=operational CBSR=3 <7>[ 28.141508] ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0 <7>[ 28.141511] ohci_hcd 0000:00:03.0: intrstatus 0x00000044 RHSC SF <7>[ 28.141514] ohci_hcd 0000:00:03.0: intrenable 0x8000000a MIE RD WDH <7>[ 28.141520] ohci_hcd 0000:00:03.0: hcca frame #0003 <7>[ 28.141524] ohci_hcd 0000:00:03.0: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 28.141528] ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 28.141531] ohci_hcd 0000:00:03.0: roothub.status 00008000 DRWE <7>[ 28.141536] ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS <7>[ 28.141539] ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS <7>[ 28.141558] usb usb1: default language 0x0409 <7>[ 28.141566] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 28.141568] usb usb1: Product: OHCI Host Controller <6>[ 28.154592] usb usb1: Manufacturer: Linux 2.6.23-rc6-speedy ohci_hcd <6>[ 28.167811] usb usb1: SerialNumber: 0000:00:03.0 <7>[ 28.180985] usb usb1: uevent <7>[ 28.181151] usb usb1: usb_probe_device <6>[ 28.182381] usb usb1: configuration #1 chosen from 1 choice <7>[ 28.195604] usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>[ 28.195620] usb 1-0:1.0: uevent <7>[ 28.195623] usb 1-0:1.0: uevent <7>[ 28.195773] hub 1-0:1.0: usb_probe_interface <7>[ 28.195776] hub 1-0:1.0: usb_probe_interface - got id <6>[ 28.195779] hub 1-0:1.0: USB hub found <6>[ 28.208829] hub 1-0:1.0: 2 ports detected <7>[ 28.221712] hub 1-0:1.0: standalone hub <7>[ 28.221715] hub 1-0:1.0: no power switching (usb 1.0) <7>[ 28.221717] hub 1-0:1.0: no over-current protection <7>[ 28.221719] hub 1-0:1.0: power on to power good time: 2ms <7>[ 28.221725] hub 1-0:1.0: local power source is good <7>[ 28.221727] hub 1-0:1.0: trying to enable port power on non-switchable hub <7>[ 28.323442] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 28.323768] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS <7>[ 28.323776] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s <6>[ 28.323836] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 20 <6>[ 28.337023] uhci_hcd 0000:00:07.0: UHCI Host Controller <6>[ 28.350241] uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2 <6>[ 28.363354] uhci_hcd 0000:00:07.0: detected 2 ports <7>[ 28.376317] uhci_hcd 0000:00:07.0: uhci_check_and_reset_hc: cmd = 0x0000 <7>[ 28.376319] uhci_hcd 0000:00:07.0: Performing full reset <6>[ 28.376340] uhci_hcd 0000:00:07.0: irq 20, io base 0x0000e000 <7>[ 28.389420] usb usb2: default language 0x0409 <7>[ 28.389428] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 28.389431] usb usb2: Product: UHCI Host Controller <6>[ 28.402470] usb usb2: Manufacturer: Linux 2.6.23-rc6-speedy uhci_hcd <6>[ 28.415574] usb usb2: SerialNumber: 0000:00:07.0 <7>[ 28.428745] usb usb2: uevent <7>[ 28.428913] usb usb2: usb_probe_device <6>[ 28.429082] usb usb2: configuration #1 chosen from 1 choice <7>[ 28.442373] usb usb2: adding 2-0:1.0 (config #1, interface 0) <7>[ 28.442389] usb 2-0:1.0: uevent <7>[ 28.442392] usb 2-0:1.0: uevent <7>[ 28.442544] hub 2-0:1.0: usb_probe_interface <7>[ 28.442547] hub 2-0:1.0: usb_probe_interface - got id <6>[ 28.442550] hub 2-0:1.0: USB hub found <6>[ 28.455767] hub 2-0:1.0: 2 ports detected <7>[ 28.468960] hub 2-0:1.0: standalone hub <7>[ 28.468963] hub 2-0:1.0: no power switching (usb 1.0) <7>[ 28.468964] hub 2-0:1.0: individual port over-current protection <7>[ 28.468967] hub 2-0:1.0: power on to power good time: 2ms <7>[ 28.468971] hub 2-0:1.0: local power source is good <7>[ 28.468974] hub 2-0:1.0: trying to enable port power on non-switchable hub <7>[ 28.472040] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 <7>[ 28.543357] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <7>[ 28.552385] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ecc82] <6>[ 28.571693] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>[ 28.584884] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0 <6>[ 28.600358] usb 1-1: new low speed USB device using ohci_hcd and address 2 <6>[ 28.616245] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21 <6>[ 28.632262] ehci_hcd 0000:00:03.3: EHCI Host Controller <6>[ 28.652269] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 <7>[ 28.665208] ehci_hcd 0000:00:03.3: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 <7>[ 28.665212] ehci_hcd 0000:00:03.3: reset hcc_params 7070 thresh 7 uframes 1024 <7>[ 28.665254] PCI: cache line size of 128 is not supported by device 0000:00:03.3 <7>[ 28.665258] ehci_hcd 0000:00:03.3: supports USB remote wakeup <6>[ 28.665268] ehci_hcd 0000:00:03.3: irq 21, io mem 0xe2024000 <7>[ 28.684000] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <7>[ 28.684018] ehci_hcd 0000:00:03.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 28.684025] ehci_hcd 0000:00:03.3: init command 010001 (park)=0 ithresh=1 period=1024 RUN <6>[ 28.684030] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <7>[ 28.713688] usb usb3: default language 0x0409 <7>[ 28.713699] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 28.713702] usb usb3: Product: EHCI Host Controller <6>[ 28.726712] usb usb3: Manufacturer: Linux 2.6.23-rc6-speedy ehci_hcd <6>[ 28.739792] usb usb3: SerialNumber: 0000:00:03.3 <7>[ 28.752739] ohci_hcd 0000:00:03.0: urb c5ead340 path 1 ep0out 5ec20000 cc 5 --> status -62 <7>[ 28.752777] usb usb3: uevent <7>[ 28.752981] usb usb3: usb_probe_device <6>[ 28.753149] usb usb3: configuration #1 chosen from 1 choice <7>[ 28.765850] usb usb3: adding 3-0:1.0 (config #1, interface 0) <7>[ 28.765866] usb 3-0:1.0: uevent <7>[ 28.765870] usb 3-0:1.0: uevent <7>[ 28.766029] hub 3-0:1.0: usb_probe_interface <7>[ 28.766032] hub 3-0:1.0: usb_probe_interface - got id <6>[ 28.766035] hub 3-0:1.0: USB hub found <6>[ 28.778320] hub 3-0:1.0: 6 ports detected <7>[ 28.790546] hub 3-0:1.0: standalone hub <7>[ 28.790548] hub 3-0:1.0: no power switching (usb 1.0) <7>[ 28.790550] hub 3-0:1.0: individual port over-current protection <7>[ 28.790552] hub 3-0:1.0: Single TT <7>[ 28.790554] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 28.790556] hub 3-0:1.0: power on to power good time: 20ms <7>[ 28.790561] hub 3-0:1.0: local power source is good <7>[ 28.790564] hub 3-0:1.0: trying to enable port power on non-switchable hub <6>[ 28.891611] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20 <7>[ 28.957103] ohci_hcd 0000:00:03.0: urb c5ead340 path 1 ep0out 5ec20000 cc 5 --> status -62 <3>[ 29.166906] usb 1-1: device not accepting address 2, error -62 <6>[ 29.219108] intel8x0_measure_ac97_clock: measured 52223 usecs <6>[ 29.231404] intel8x0: clocking to 48000 <7>[ 29.243556] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS <7>[ 29.243568] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006 <7>[ 29.243583] uhci_hcd 0000:00:07.0: port 1 portsc 008a,00 <7>[ 29.243591] hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s <6>[ 29.271859] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 18 <6>[ 29.284362] saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 18, latency: 32, mmio: 0xe2027000 <6>[ 29.315863] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] <6>[ 29.331867] saa7134[0]: board init: gpio is 0 <7>[ 29.379062] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 <7>[ 29.379072] uhci_hcd 0000:00:07.0: port 2 portsc 009b,00 <7>[ 29.379081] hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s <6>[ 29.487726] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 <6>[ 29.500640] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 <7>[ 29.513424] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 <6>[ 29.513439] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.526287] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.539226] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.552152] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.567181] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.580131] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <6>[ 29.610960] saa7134[0] Tuner type is 38 <6>[ 29.623745] usb 2-2: new full speed USB device using uhci_hcd and address 2 <6>[ 29.699660] tuner 1-0043: chip found @ 0x86 (saa7134[0]) <6>[ 29.713053] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) <4>[ 29.738912] tuner 1-0060: All bytes are equal. It is not a TEA5767 <6>[ 29.752722] tuner 1-0060: chip found @ 0xc0 (saa7134[0]) <6>[ 29.766658] tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) <6>[ 29.780914] tuner 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) <6>[ 29.800731] saa7134[0]: registered device video0 [v4l2] <6>[ 29.815177] usb 2-2: not running at top speed; connect to a high speed hub <6>[ 29.830150] saa7134[0]: registered device vbi0 <6>[ 29.845271] saa7134[0]: registered device radio0 <7>[ 29.860180] usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 29.860206] usb 2-2: uevent <7>[ 29.860382] usb 2-2: usb_probe_device <6>[ 29.860549] usb 2-2: configuration #1 chosen from 1 choice <7>[ 29.877965] usb 2-2: adding 2-2:1.0 (config #1, interface 0) <7>[ 29.877999] usb 2-2:1.0: uevent <7>[ 29.878003] usb 2-2:1.0: uevent <7>[ 29.878281] hub 2-2:1.0: usb_probe_interface <7>[ 29.878285] hub 2-2:1.0: usb_probe_interface - got id <6>[ 29.878287] hub 2-2:1.0: USB hub found <6>[ 29.894949] hub 2-2:1.0: 2 ports detected <7>[ 29.911259] hub 2-2:1.0: compound device; port removable status: FR <7>[ 29.911262] hub 2-2:1.0: ganged power switching <7>[ 29.911264] hub 2-2:1.0: global over-current protection <7>[ 29.911267] hub 2-2:1.0: power on to power good time: 100ms <6>[ 29.912470] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 22 <7>[ 29.929246] hub 2-2:1.0: local power source is good <7>[ 29.929249] hub 2-2:1.0: no over-current condition exists <7>[ 29.929251] hub 2-2:1.0: enabling power on all ports <6>[ 29.951861] ohci_hcd 0000:00:03.1: OHCI Host Controller <6>[ 29.977427] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 4 <7>[ 29.993578] ohci_hcd 0000:00:03.1: created debug files <6>[ 29.993589] ohci_hcd 0000:00:03.1: irq 22, io mem 0xe2022000 <7>[ 30.031582] uhci_hcd 0000:00:07.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us <7>[ 30.032042] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 30.032052] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS <7>[ 30.032060] hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s <7>[ 30.071577] ohci_hcd 0000:00:03.1: enabling initreset quirk <7>[ 30.073577] ohci_hcd 0000:00:03.1: OHCI controller state <7>[ 30.073581] ohci_hcd 0000:00:03.1: OHCI 1.0, NO legacy support registers <7>[ 30.073585] ohci_hcd 0000:00:03.1: control 0x083 HCFS=operational CBSR=3 <7>[ 30.073588] ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0 <7>[ 30.073591] ohci_hcd 0000:00:03.1: intrstatus 0x00000004 SF <7>[ 30.073595] ohci_hcd 0000:00:03.1: intrenable 0x8000004a MIE RHSC RD WDH <7>[ 30.073601] ohci_hcd 0000:00:03.1: hcca frame #0003 <7>[ 30.073605] ohci_hcd 0000:00:03.1: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 30.073609] ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 30.073613] ohci_hcd 0000:00:03.1: roothub.status 00008000 DRWE <7>[ 30.073617] ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS <7>[ 30.073621] ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS <7>[ 30.073645] usb usb4: default language 0x0409 <7>[ 30.073653] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.073656] usb usb4: Product: OHCI Host Controller <6>[ 30.090046] usb usb4: Manufacturer: Linux 2.6.23-rc6-speedy ohci_hcd <6>[ 30.106677] usb usb4: SerialNumber: 0000:00:03.1 <7>[ 30.123266] usb usb4: uevent <7>[ 30.123548] usb usb4: usb_probe_device <6>[ 30.123725] usb usb4: configuration #1 chosen from 1 choice <7>[ 30.140197] usb usb4: adding 4-0:1.0 (config #1, interface 0) <7>[ 30.140213] usb 4-0:1.0: uevent <7>[ 30.140216] usb 4-0:1.0: uevent <7>[ 30.140369] hub 4-0:1.0: usb_probe_interface <7>[ 30.140372] hub 4-0:1.0: usb_probe_interface - got id <6>[ 30.140374] hub 4-0:1.0: USB hub found <6>[ 30.156633] hub 4-0:1.0: 2 ports detected <7>[ 30.172685] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 <7>[ 30.172690] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000 <7>[ 30.172698] ehci_hcd 0000:00:03.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT <7>[ 30.172705] hub 3-0:1.0: port 1, status 0501, change 0001, 480 Mb/s <7>[ 30.172710] hub 4-0:1.0: standalone hub <7>[ 30.172712] hub 4-0:1.0: no power switching (usb 1.0) <7>[ 30.172714] hub 4-0:1.0: no over-current protection <7>[ 30.172716] hub 4-0:1.0: power on to power good time: 2ms <7>[ 30.172721] hub 4-0:1.0: local power source is good <7>[ 30.172723] hub 4-0:1.0: trying to enable port power on non-switchable hub <6>[ 30.275988] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 23 <6>[ 30.292418] ohci_hcd 0000:00:03.2: OHCI Host Controller <7>[ 30.308749] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 <7>[ 30.308759] ehci_hcd 0000:00:03.3: port 1 low speed --> companion <6>[ 30.308993] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 5 <7>[ 30.325399] ohci_hcd 0000:00:03.2: created debug files <6>[ 30.325409] ohci_hcd 0000:00:03.2: irq 23, io mem 0xe2023000 <7>[ 30.363488] ehci_hcd 0000:00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC <7>[ 30.363514] ehci_hcd 0000:00:03.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT <7>[ 30.363522] hub 3-0:1.0: port 2, status 0501, change 0001, 480 Mb/s <7>[ 30.394700] ohci_hcd 0000:00:03.2: enabling initreset quirk <7>[ 30.396699] ohci_hcd 0000:00:03.2: OHCI controller state <7>[ 30.396703] ohci_hcd 0000:00:03.2: OHCI 1.0, NO legacy support registers <7>[ 30.396708] ohci_hcd 0000:00:03.2: control 0x083 HCFS=operational CBSR=3 <7>[ 30.396711] ohci_hcd 0000:00:03.2: cmdstatus 0x00000 SOC=0 <7>[ 30.396714] ohci_hcd 0000:00:03.2: intrstatus 0x00000004 SF <7>[ 30.396718] ohci_hcd 0000:00:03.2: intrenable 0x8000004a MIE RHSC RD WDH <7>[ 30.396724] ohci_hcd 0000:00:03.2: hcca frame #0003 <7>[ 30.396728] ohci_hcd 0000:00:03.2: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2(2) <7>[ 30.396732] ohci_hcd 0000:00:03.2: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 30.396736] ohci_hcd 0000:00:03.2: roothub.status 00008000 DRWE <7>[ 30.396740] ohci_hcd 0000:00:03.2: roothub.portstatus [0] 0x00000100 PPS <7>[ 30.396744] ohci_hcd 0000:00:03.2: roothub.portstatus [1] 0x00000100 PPS <7>[ 30.396761] usb usb5: default language 0x0409 <7>[ 30.396769] usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.396772] usb usb5: Product: OHCI Host Controller <6>[ 30.413078] usb usb5: Manufacturer: Linux 2.6.23-rc6-speedy ohci_hcd <6>[ 30.429490] usb usb5: SerialNumber: 0000:00:03.2 <7>[ 30.445857] usb usb5: uevent <7>[ 30.446071] usb usb5: usb_probe_device <6>[ 30.446244] usb usb5: configuration #1 chosen from 1 choice <7>[ 30.462738] usb usb5: adding 5-0:1.0 (config #1, interface 0) <7>[ 30.462755] usb 5-0:1.0: uevent <7>[ 30.462758] usb 5-0:1.0: uevent <7>[ 30.462930] hub 5-0:1.0: usb_probe_interface <7>[ 30.462933] hub 5-0:1.0: usb_probe_interface - got id <6>[ 30.462935] hub 5-0:1.0: USB hub found <6>[ 30.479219] hub 5-0:1.0: 2 ports detected <7>[ 30.495301] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 <7>[ 30.495311] hub 5-0:1.0: standalone hub <7>[ 30.495313] hub 5-0:1.0: no power switching (usb 1.0) <7>[ 30.495315] hub 5-0:1.0: no over-current protection <7>[ 30.495317] hub 5-0:1.0: power on to power good time: 2ms <7>[ 30.495322] hub 5-0:1.0: local power source is good <7>[ 30.495324] hub 5-0:1.0: trying to enable port power on non-switchable hub <7>[ 30.550622] ehci_hcd 0000:00:03.3: port 2 full speed --> companion <7>[ 30.550627] ehci_hcd 0000:00:03.3: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT <7>[ 30.550653] hub 3-0:1.0: port 2 not reset yet, waiting 50ms <6>[ 30.598987] ACPI: PCI Interrupt 0000:00:07.1[B] -> GSI 19 (level, low) -> IRQ 18 <6>[ 30.615394] uhci_hcd 0000:00:07.1: UHCI Host Controller <6>[ 30.631777] uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 6 <7>[ 30.648454] ehci_hcd 0000:00:03.3: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC <7>[ 30.648479] hub 2-2:1.0: state 7 ports 2 chg 0000 evt 0002 <6>[ 30.648492] uhci_hcd 0000:00:07.1: detected 2 ports <7>[ 30.665943] uhci_hcd 0000:00:07.1: uhci_check_and_reset_hc: cmd = 0x0000 <7>[ 30.665946] uhci_hcd 0000:00:07.1: Performing full reset <6>[ 30.665968] uhci_hcd 0000:00:07.1: irq 18, io base 0x0000e400 <7>[ 30.683350] hub 2-2:1.0: port 1, status 0101, change 0001, 12 Mb/s <7>[ 30.683402] usb usb6: default language 0x0409 <7>[ 30.683410] usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.683412] usb usb6: Product: UHCI Host Controller <6>[ 30.700809] usb usb6: Manufacturer: Linux 2.6.23-rc6-speedy uhci_hcd <6>[ 30.718362] usb usb6: SerialNumber: 0000:00:07.1 <7>[ 30.734751] usb usb6: uevent <7>[ 30.734946] usb usb6: usb_probe_device <6>[ 30.735119] usb usb6: configuration #1 chosen from 1 choice <7>[ 30.752644] usb usb6: adding 6-0:1.0 (config #1, interface 0) <7>[ 30.752664] usb 6-0:1.0: uevent <7>[ 30.752667] usb 6-0:1.0: uevent <7>[ 30.752834] hub 6-0:1.0: usb_probe_interface <7>[ 30.752837] hub 6-0:1.0: usb_probe_interface - got id <6>[ 30.752840] hub 6-0:1.0: USB hub found <6>[ 30.770263] hub 6-0:1.0: 2 ports detected <7>[ 30.786439] hub 6-0:1.0: standalone hub <7>[ 30.786442] hub 6-0:1.0: no power switching (usb 1.0) <7>[ 30.786444] hub 6-0:1.0: individual port over-current protection <7>[ 30.786446] hub 6-0:1.0: power on to power good time: 2ms <7>[ 30.786450] hub 6-0:1.0: local power source is good <7>[ 30.786453] hub 6-0:1.0: trying to enable port power on non-switchable hub <7>[ 30.851623] hub 2-2:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <7>[ 30.867617] hub 2-2:1.0: port 1 not reset yet, waiting 10ms <6>[ 30.887700] ACPI: PCI Interrupt 0000:00:07.2[C] -> GSI 16 (level, low) -> IRQ 16 <6>[ 30.905195] ehci_hcd 0000:00:07.2: EHCI Host Controller <6>[ 30.921451] ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 7 <7>[ 30.937827] ehci_hcd 0000:00:07.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 <7>[ 30.937832] ehci_hcd 0000:00:07.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 <7>[ 30.937878] ehci_hcd 0000:00:07.2: MWI active <7>[ 30.937881] ehci_hcd 0000:00:07.2: supports USB remote wakeup <6>[ 30.937891] ehci_hcd 0000:00:07.2: irq 16, io mem 0xe2026000 <7>[ 30.954089] ehci_hcd 0000:00:07.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 30.954095] ehci_hcd 0000:00:07.2: init command 010009 (park)=0 ithresh=1 period=256 RUN <6>[ 30.954099] ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <7>[ 30.971361] usb 2-2: uhci_result_common: failed with status 440000 <6>[ 30.971380] usb 2-2.1: new full speed USB device using uhci_hcd and address 3 <7>[ 30.988908] usb usb7: default language 0x0409 <7>[ 30.988916] usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 30.988918] usb usb7: Product: EHCI Host Controller <7>[ 31.005179] usb 2-2.1: uhci_result_common: failed with status 440000 <6>[ 31.005196] usb usb7: Manufacturer: Linux 2.6.23-rc6-speedy ehci_hcd <7>[ 31.021504] usb 2-2.1: uhci_result_common: failed with status 440000 <6>[ 31.021516] usb usb7: SerialNumber: 0000:00:07.2 <7>[ 31.037752] usb 2-2.1: uhci_result_common: failed with status 440000 <7>[ 31.037790] usb usb7: uevent <7>[ 31.037997] usb usb7: usb_probe_device <6>[ 31.038188] usb usb7: configuration #1 chosen from 1 choice <7>[ 31.055498] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.055525] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.073016] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.073029] usb usb7: adding 7-0:1.0 (config #1, interface 0) <7>[ 31.073046] usb 7-0:1.0: uevent <7>[ 31.073049] usb 7-0:1.0: uevent <7>[ 31.073229] hub 7-0:1.0: usb_probe_interface <7>[ 31.073232] hub 7-0:1.0: usb_probe_interface - got id <6>[ 31.073234] hub 7-0:1.0: USB hub found <7>[ 31.090526] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.090543] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.107960] hub 2-2:1.0: port 1 not enabled, trying reset again... <6>[ 31.107983] hub 7-0:1.0: 4 ports detected <7>[ 31.124978] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.124989] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.142136] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.142142] hub 7-0:1.0: standalone hub <7>[ 31.142144] hub 7-0:1.0: no power switching (usb 1.0) <7>[ 31.142146] hub 7-0:1.0: individual port over-current protection <7>[ 31.142148] hub 7-0:1.0: Single TT <7>[ 31.142150] hub 7-0:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 31.142152] hub 7-0:1.0: power on to power good time: 20ms <7>[ 31.142156] hub 7-0:1.0: local power source is good <7>[ 31.142159] hub 7-0:1.0: trying to enable port power on non-switchable hub <7>[ 31.142522] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.142533] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.159509] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.161515] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.161525] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.178576] hub 2-2:1.0: port 1 not enabled, trying reset again... <3>[ 31.178579] hub 2-2:1.0: Cannot enable port 1. Maybe the USB cable is bad? <7>[ 31.195505] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.195515] hub 2-2:1.0: cannot disable port 1 (err = -71) <7>[ 31.212499] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.212509] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.228606] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.229493] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.229503] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.245406] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.246494] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.246518] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.262262] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.262483] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.262493] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.278094] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 31.278098] hub 2-2:1.0: transfer --> -84 <7>[ 31.278106] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.278482] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.279269] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.294804] hub 2-2:1.0: port 1 not enabled, trying reset again... <3>[ 31.294807] hub 2-2:1.0: Cannot enable port 1. Maybe the USB cable is bad? <7>[ 31.350464] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.355200] hub 2-2:1.0: cannot disable port 1 (err = -71) <7>[ 31.379454] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.379480] hub 2-2:1.0: cannot reset port 1 (err = -71) <3>[ 31.397903] saa7134[0]/dvb: frontend initialization failed <7>[ 31.435173] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.436436] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.436833] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.459142] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.460426] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.463160] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.495128] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.496415] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.496435] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.519120] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.520409] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.521857] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.548720] hub 2-2:1.0: port 1 not enabled, trying reset again... <3>[ 31.548725] hub 2-2:1.0: Cannot enable port 1. Maybe the USB cable is bad? <7>[ 31.572391] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.572955] hub 2-2:1.0: cannot disable port 1 (err = -71) <7>[ 31.603380] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.604766] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.631183] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.632373] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.632936] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.651099] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.652361] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 31.653366] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 31.653375] hub 2-2:1.0: transfer --> -84 <3>[ 31.654778] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.671923] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.673361] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.673680] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.688376] ohci_hcd 0000:00:03.2: auto-stop root hub <7>[ 31.688392] hub 2-2:1.0: port 1 not enabled, trying reset again... <7>[ 31.689348] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.691103] hub 2-2:1.0: cannot reset port 1 (err = -71) <7>[ 31.719453] hub 2-2:1.0: port 1 not enabled, trying reset again... <3>[ 31.719458] hub 2-2:1.0: Cannot enable port 1. Maybe the USB cable is bad? <7>[ 31.752332] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.753934] hub 2-2:1.0: cannot disable port 1 (err = -71) <7>[ 31.776327] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.779045] hub 2-2:1.0: cannot disable port 1 (err = -71) <7>[ 31.800317] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 31.803026] hub 2-2:1.0: hub_port_status failed (err = -71) <7>[ 31.843028] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 31.843041] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS <7>[ 31.843050] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s <7>[ 31.975032] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <7>[ 32.037239] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 32.037249] hub 2-2:1.0: transfer --> -84 <7>[ 32.046947] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS <6>[ 32.103008] usb 4-1: new full speed USB device using ohci_hcd and address 2 <7>[ 32.186952] ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS <6>[ 32.199585] Adding 27189972k swap on /dev/hdb11. Priority:-1 extents:1 across:27189972k <7>[ 32.262915] usb 4-1: ep0 maxpacket = 8 <7>[ 32.273488] usb 4-1: default language 0x0409 <7>[ 32.282483] usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 32.282486] usb 4-1: Product: Medion Flash XL V3.0C <6>[ 32.296567] usb 4-1: Manufacturer: MEDION <6>[ 32.310483] usb 4-1: SerialNumber: 2003-02 <7>[ 32.324355] usb 4-1: uevent <7>[ 32.324378] usb 4-1: usb_probe_device <6>[ 32.324433] usb 4-1: configuration #1 chosen from 1 choice <7>[ 32.342471] usb 4-1: adding 4-1:1.0 (config #1, interface 0) <7>[ 32.342509] usb 4-1:1.0: uevent <7>[ 32.342514] usb 4-1:1.0: uevent <7>[ 32.345578] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0004 <7>[ 32.345587] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 32.345593] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS <7>[ 32.345598] hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s <7>[ 32.421115] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 32.421126] hub 2-2:1.0: transfer --> -84 <7>[ 32.470855] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 <4>[ 32.525197] fuse init (API version 7.8) <7>[ 32.550802] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <5>[ 32.586605] SCSI subsystem initialized <6>[ 32.606910] usb 1-1: new low speed USB device using ohci_hcd and address 4 <6>[ 32.643288] Initializing USB Mass Storage driver... <7>[ 32.694774] ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS <7>[ 32.778183] usb 1-1: skipped 1 descriptor after interface <7>[ 32.781176] usb 1-1: default language 0x0409 <7>[ 32.784178] usb 1-1: new device strings: Mfr=0, Product=2, SerialNumber=0 <6>[ 32.784181] usb 1-1: Product: USB Optical Mouse <7>[ 32.798182] usb 1-1: uevent <7>[ 32.798700] usb 1-1: usb_probe_device <6>[ 32.798948] usb 1-1: configuration #1 chosen from 1 choice <7>[ 32.812948] usb 2-2: uhci_result_common: failed with status 440000 <7>[ 32.812955] hub 2-2:1.0: transfer --> -84 <7>[ 32.814729] usb 1-1: adding 1-1:1.0 (config #1, interface 0) <7>[ 32.814767] usb 1-1:1.0: uevent <7>[ 32.814771] usb 1-1:1.0: uevent <7>[ 32.815332] usb-storage 4-1:1.0: usb_probe_interface <7>[ 32.815339] usb-storage 4-1:1.0: usb_probe_interface - got id <7>[ 32.815395] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 32.815408] hub 2-2:1.0: state 7 ports 2 chg 0000 evt 0002 <6>[ 32.815469] scsi0 : SCSI emulation for USB Mass Storage devices <7>[ 32.830379] usb 2-2: uhci_result_common: failed with status 440000 <3>[ 32.830621] hub 2-2:1.0: hub_port_status failed (err = -71) <7>[ 32.845721] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0006 <7>[ 32.845729] uhci_hcd 0000:00:07.1: port 1 portsc 008a,00 <7>[ 32.845740] hub 6-0:1.0: port 1, status 0100, change 0003, 12 Mb/s <6>[ 32.845777] usbcore: registered new interface driver usb-storage <6>[ 32.859878] USB Mass Storage support registered. <7>[ 32.874741] usb-storage: device found at 2 <7>[ 32.874745] usb-storage: waiting for device to settle before scanning <7>[ 32.970663] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 <7>[ 32.970672] uhci_hcd 0000:00:07.1: port 2 portsc 008a,00 <7>[ 32.970681] hub 6-0:1.0: port 2, status 0100, change 0003, 12 Mb/s <7>[ 33.098622] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 <7>[ 33.098630] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 <7>[ 33.098636] uhci_hcd 0000:00:07.0: port 2 portsc 009a,00 <7>[ 33.098644] hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s <6>[ 33.098648] usb 2-2: USB disconnect, address 2 <7>[ 33.112597] usb 2-2: unregistering device <7>[ 33.112600] usb 2-2: usb_disable_device nuking all URBs <7>[ 33.112610] uhci_hcd 0000:00:07.0: shutdown urb f7d8f2c0 pipe 40408280 ep1in-intr <7>[ 33.113891] uhci_hcd 0000:00:07.0: release dev 2 ep81-INT, period 128, phase 0, 12 us <7>[ 33.113901] usb 2-2: unregistering interface 2-2:1.0 <7>[ 33.114435] usb_endpoint usbdev2.2_ep81: ep_device_release called for usbdev2.2_ep81 <7>[ 33.114496] usb 2-2:1.0: uevent <7>[ 33.114500] usb 2-2:1.0: uevent <7>[ 33.114988] usb_endpoint usbdev2.2_ep00: ep_device_release called for usbdev2.2_ep00 <7>[ 33.115029] usb 2-2: uevent <7>[ 33.241625] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 <7>[ 33.241633] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 <7>[ 33.241645] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT <7>[ 33.241651] hub 7-0:1.0: port 2, status 0501, change 0001, 480 Mb/s <7>[ 33.369575] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 <7>[ 33.426755] ehci_hcd 0000:00:07.2: port 2 high speed <7>[ 33.426762] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT <6>[ 33.482503] usb 7-2: new high speed USB device using ehci_hcd and address 2 <7>[ 33.550733] ehci_hcd 0000:00:07.2: port 2 high speed <7>[ 33.550739] ehci_hcd 0000:00:07.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT <6>[ 33.617758] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@...hat.com <7>[ 33.633103] usb 7-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 33.633142] usb 7-2: uevent <7>[ 33.633614] usb 7-2: usb_probe_device <6>[ 33.633852] usb 7-2: configuration #1 chosen from 1 choice <7>[ 33.649223] usb 7-2: adding 7-2:1.0 (config #1, interface 0) <7>[ 33.649252] usb 7-2:1.0: uevent <7>[ 33.649256] usb 7-2:1.0: uevent <7>[ 33.649461] hub 7-2:1.0: usb_probe_interface <7>[ 33.649465] hub 7-2:1.0: usb_probe_interface - got id <6>[ 33.649467] hub 7-2:1.0: USB hub found <6>[ 33.664718] hub 7-2:1.0: 2 ports detected <7>[ 33.679720] hub 7-2:1.0: compound device; port removable status: FR <7>[ 33.679723] hub 7-2:1.0: ganged power switching <7>[ 33.679725] hub 7-2:1.0: global over-current protection <7>[ 33.679727] hub 7-2:1.0: Single TT <7>[ 33.679729] hub 7-2:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 33.679731] hub 7-2:1.0: power on to power good time: 100ms <7>[ 33.680035] hub 7-2:1.0: local power source is good <7>[ 33.680038] hub 7-2:1.0: no over-current condition exists <7>[ 33.680040] hub 7-2:1.0: enabling power on all ports <7>[ 33.781438] usb 7-2: link qh256-0001/c5f29100 start 255 [1/0 us] <7>[ 33.782453] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 33.782463] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 33.782468] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 33.782472] hub 7-2:1.0: state 7 ports 2 chg 0000 evt 0000 <7>[ 33.782694] hub 7-2:1.0: port 1, status 0101, change 0001, 12 Mb/s <7>[ 33.909422] hub 7-2:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <6>[ 33.981410] usb 7-2.1: new high speed USB device using ehci_hcd and address 3 <7>[ 34.009402] hub 7-2:1.0: port 1 not reset yet, waiting 10ms <7>[ 34.101637] usb 7-2.1: new device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 34.101674] usb 7-2.1: uevent <7>[ 34.102148] usb 7-2.1: usb_probe_device <6>[ 34.102404] usb 7-2.1: configuration #1 chosen from 1 choice <7>[ 34.117886] usb 7-2.1: adding 7-2.1:1.0 (config #1, interface 0) <7>[ 34.117908] usb 7-2.1:1.0: uevent <7>[ 34.117912] usb 7-2.1:1.0: uevent <7>[ 34.118099] hub 7-2.1:1.0: usb_probe_interface <7>[ 34.118103] hub 7-2.1:1.0: usb_probe_interface - got id <6>[ 34.118105] hub 7-2.1:1.0: USB hub found <6>[ 34.134328] hub 7-2.1:1.0: 4 ports detected <7>[ 34.149464] hub 7-2.1:1.0: compound device; port removable status: FRRR <7>[ 34.149466] hub 7-2.1:1.0: ganged power switching <7>[ 34.149468] hub 7-2.1:1.0: global over-current protection <7>[ 34.149923] hub 7-2.1:1.0: TT per port <7>[ 34.149928] hub 7-2.1:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 34.149930] hub 7-2.1:1.0: power on to power good time: 100ms <7>[ 34.150124] hub 7-2.1:1.0: local power source is good <7>[ 34.150127] hub 7-2.1:1.0: no over-current condition exists <7>[ 34.150130] hub 7-2.1:1.0: enabling power on all ports <7>[ 34.253267] usb 7-2.1: link qh256-0001/c5f29200 start 255 [1/0 us] <7>[ 34.253871] hub 7-2:1.0: state 7 ports 2 chg 0000 evt 0002 <7>[ 34.253980] hub 7-2.1:1.0: state 7 ports 4 chg 0000 evt 0000 <7>[ 34.254483] hub 7-2.1:1.0: port 1, status 0101, change 0001, 12 Mb/s <7>[ 34.381333] hub 7-2.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 <7>[ 34.414220] usb usb2: suspend_rh (auto-stop) <7>[ 34.414239] usb usb6: suspend_rh (auto-stop) <6>[ 34.453319] usb 7-2.1.1: new high speed USB device using ehci_hcd and address 4 <7>[ 34.489310] hub 7-2.1:1.0: port 1 not reset yet, waiting 10ms <7>[ 34.601417] usb 7-2.1.1: skipped 1 descriptor after endpoint <7>[ 34.608537] usb 7-2.1.1: default language 0x0409 <7>[ 34.647905] usb 7-2.1.1: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 34.647908] usb 7-2.1.1: Product: Flash Card Reader <6>[ 34.663016] usb 7-2.1.1: Manufacturer: Generic <6>[ 34.677774] usb 7-2.1.1: SerialNumber: 26020128B005 <7>[ 34.692456] usb 7-2.1.1: uevent <7>[ 34.694184] usb 7-2.1.1: usb_probe_device <6>[ 34.694499] usb 7-2.1.1: configuration #1 chosen from 1 choice <7>[ 34.710146] usb 7-2.1.1: adding 7-2.1.1:1.0 (config #1, interface 0) <7>[ 34.710187] usb 7-2.1.1:1.0: uevent <7>[ 34.710191] usb 7-2.1.1:1.0: uevent <7>[ 34.710452] usb-storage 7-2.1.1:1.0: usb_probe_interface <7>[ 34.710458] usb-storage 7-2.1.1:1.0: usb_probe_interface - got id <6>[ 34.710520] scsi1 : SCSI emulation for USB Mass Storage devices <7>[ 34.725720] usb-storage: device found at 4 <7>[ 34.725723] usb-storage: waiting for device to settle before scanning <7>[ 34.726521] hub 7-2.1:1.0: state 7 ports 4 chg 0000 evt 0002 <6>[ 34.735981] usbcore: registered new interface driver hiddev <7>[ 34.759779] usbhid 1-1:1.0: usb_probe_interface <7>[ 34.759784] usbhid 1-1:1.0: usb_probe_interface - got id <6>[ 34.775517] input: USB Optical Mouse as /class/input/input3 <6>[ 34.794539] input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1 <6>[ 34.809588] usbcore: registered new interface driver usbhid <6>[ 34.838919] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <5>[ 37.930697] scsi 0:0:0:0: Direct-Access Medion Flash XL CF 3.0C PQ: 0 ANSI: 0 CCS <5>[ 37.937694] scsi 0:0:0:1: Direct-Access Medion Flash XL MS 3.0C PQ: 0 ANSI: 0 CCS <5>[ 37.945183] scsi 0:0:0:2: Direct-Access Medion Flash XL MMC/SD 3.0C PQ: 0 ANSI: 0 CCS <5>[ 37.953175] scsi 0:0:0:3: Direct-Access Medion Flash XL SM 3.0C PQ: 0 ANSI: 0 CCS <7>[ 37.962926] usb-storage: device scan complete <5>[ 37.981197] sd 0:0:0:0: [sda] Attached SCSI removable disk <5>[ 37.992234] sd 0:0:0:1: [sdb] Attached SCSI removable disk <5>[ 38.003224] sd 0:0:0:2: [sdc] Attached SCSI removable disk <5>[ 38.013694] sd 0:0:0:3: [sdd] Attached SCSI removable disk <5>[ 38.048981] sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>[ 38.050118] sd 0:0:0:1: Attached scsi generic sg1 type 0 <5>[ 38.051218] sd 0:0:0:2: Attached scsi generic sg2 type 0 <5>[ 38.052303] sd 0:0:0:3: Attached scsi generic sg3 type 0 <6>[ 38.409965] loop: module loaded <6>[ 38.486212] kjournald starting. Commit interval 5 seconds <6>[ 38.501848] EXT3 FS on hdb8, internal journal <6>[ 38.517372] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 38.560004] kjournald starting. Commit interval 5 seconds <6>[ 38.575769] EXT3 FS on hdb9, internal journal <6>[ 38.591328] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 38.636545] kjournald starting. Commit interval 5 seconds <6>[ 38.652348] EXT3 FS on hdb10, internal journal <6>[ 38.667898] EXT3-fs: mounted filesystem with ordered data mode. <7>[ 38.737498] ISO 9660 Extensions: Microsoft Joliet Level 3 <7>[ 38.784723] ISO 9660 Extensions: RRIP_1991A <6>[ 38.823999] SGI XFS with ACLs, security attributes, realtime, no debug enabled <6>[ 38.840268] SGI XFS Quota Management subsystem <5>[ 38.940168] XFS mounting filesystem hdb12 <7>[ 39.051261] Ending clean XFS mount for filesystem: hdb12 <5>[ 39.732844] scsi 1:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 <5>[ 39.753803] sd 1:0:0:0: [sde] Attached SCSI removable disk <5>[ 39.770498] sd 1:0:0:0: Attached scsi generic sg4 type 0 <5>[ 39.790701] scsi 1:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 <5>[ 39.857314] sd 1:0:0:1: [sdf] Attached SCSI removable disk <5>[ 39.874312] sd 1:0:0:1: Attached scsi generic sg5 type 0 <7>[ 39.892592] usb-storage: device scan complete Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sat Sep 15 18:50:53 2007 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists