i386 optimization of the immediate values which uses a movl with code patching to set/unset the value used to populate the register used as variable source. Changelog: - Use text_poke_early with cr0 WP save/restore to patch the bypass. We are doing non atomic writes to a code region only touched by us (nobody can execute it since we are protected by the immediate_mutex). - Put immediate_set and _immediate_set in the architecture independent header. Signed-off-by: Mathieu Desnoyers CC: Andi Kleen CC: "H. Peter Anvin" CC: Chuck Ebbert CC: Christoph Hellwig --- arch/i386/kernel/Makefile | 1 arch/i386/kernel/immediate.c | 307 +++++++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/traps.c | 8 - include/asm-i386/immediate.h | 82 +++++++++++ 4 files changed, 394 insertions(+), 4 deletions(-) Index: linux-2.6-lttng/include/asm-i386/immediate.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6-lttng/include/asm-i386/immediate.h 2007-09-17 13:38:52.000000000 -0400 @@ -0,0 +1,82 @@ +#ifndef _ASM_I386_IMMEDIATE_H +#define _ASM_I386_IMMEDIATE_H + +/* + * Immediate values. i386 architecture optimizations. + * + * (C) Copyright 2006 Mathieu Desnoyers + * + * This file is released under the GPLv2. + * See the file COPYING for more details. + */ + +struct __immediate { + long var; /* Pointer to the identifier variable of the + * immediate value + */ + long immediate; /* + * Pointer to the memory location of the + * immediate value within the instruction. + */ + long size; /* Type size. */ +}; + +/** + * immediate_read - read immediate variable + * @name: immediate value name + * + * Reads the value of @var. + * Optimized version of the immediate. + * Do not use in __init and __exit functions. Use _immediate_read() instead. + * Makes sure the 2 and 4 bytes update will be atomic by aligning the immediate + * value. 2 bytes (short) uses a 66H prefix. If size is bigger than 4 bytes, + * fall back on a memory read. + */ +#define immediate_read(name) \ + ({ \ + __typeof__(name##__immediate) value; \ + switch (sizeof(value)) { \ + case 1: \ + asm ( ".section __immediate, \"a\", @progbits;\n\t" \ + ".long %1, (0f)+1, 1;\n\t" \ + ".previous;\n\t" \ + "0:\n\t" \ + "mov %2,%0;\n\t" \ + : "=r" (value) \ + : "m" (name##__immediate), \ + "i" (0)); \ + break; \ + case 2: \ + asm ( ".section __immediate, \"a\", @progbits;\n\t" \ + ".long %1, (0f)+2, 2;\n\t" \ + ".previous;\n\t" \ + "1:\n\t" \ + ".align 2;\n\t" \ + "0:\n\t" \ + "mov %2,%0;\n\t" \ + : "=r" (value) \ + : "m" (name##__immediate), \ + "i" (0)); \ + break; \ + case 4: \ + asm ( ".section __immediate, \"a\", @progbits;\n\t" \ + ".long %1, (0f)+1, 4;\n\t" \ + ".previous;\n\t" \ + "1:\n\t" \ + ".org (1b)+(3-((1b)%%4)), 0x90;\n\t" \ + "0:\n\t" \ + "mov %2,%0;\n\t" \ + : "=r" (value) \ + : "m" (name##__immediate), \ + "i" (0)); \ + break; \ + default:value = name##__immediate; \ + break; \ + }; \ + value; \ + }) + +extern int arch_immediate_update(const struct __immediate *immediate); +extern void arch_immediate_update_early(const struct __immediate *immediate); + +#endif /* _ASM_I386_IMMEDIATE_H */ Index: linux-2.6-lttng/arch/i386/kernel/Makefile =================================================================== --- linux-2.6-lttng.orig/arch/i386/kernel/Makefile 2007-09-17 13:37:58.000000000 -0400 +++ linux-2.6-lttng/arch/i386/kernel/Makefile 2007-09-17 13:38:44.000000000 -0400 @@ -37,6 +37,7 @@ obj-$(CONFIG_MODULES) += module.o obj-y += sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_EFI) += efi.o efi_stub.o +obj-$(CONFIG_IMMEDIATE) += immediate.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o obj-$(CONFIG_KGDB) += kgdb.o kgdb-jmp.o obj-$(CONFIG_VM86) += vm86.o Index: linux-2.6-lttng/arch/i386/kernel/immediate.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6-lttng/arch/i386/kernel/immediate.c 2007-09-17 13:38:44.000000000 -0400 @@ -0,0 +1,307 @@ +/* + * Immediate Value - i386 architecture specific code. + * + * Rationale + * + * Required because of : + * - Erratum 49 fix for Intel PIII. + * - Still present on newer processors : Intel Core 2 Duo Processor for Intel + * Centrino Duo Processor Technology Specification Update, AH33. + * Unsynchronized Cross-Modifying Code Operations Can Cause Unexpected + * Instruction Execution Results. + * + * Permits immediate value modification by XMC with correct serialization. + * + * Reentrant for NMI and trap handler instrumentation. Permits XMC to a + * location that has preemption enabled because it involves no temporary or + * reused data structure. + * + * Quoting Richard J Moore, source of the information motivating this + * implementation which differs from the one proposed by Intel which is not + * suitable for kernel context (does not support NMI and would require disabling + * interrupts on every CPU for a long period) : + * + * "There is another issue to consider when looking into using probes other + * then int3: + * + * Intel erratum 54 - Unsynchronized Cross-modifying code - refers to the + * practice of modifying code on one processor where another has prefetched + * the unmodified version of the code. Intel states that unpredictable general + * protection faults may result if a synchronizing instruction (iret, int, + * int3, cpuid, etc ) is not executed on the second processor before it + * executes the pre-fetched out-of-date copy of the instruction. + * + * When we became aware of this I had a long discussion with Intel's + * microarchitecture guys. It turns out that the reason for this erratum + * (which incidentally Intel does not intend to fix) is because the trace + * cache - the stream of micorops resulting from instruction interpretation - + * cannot guaranteed to be valid. Reading between the lines I assume this + * issue arises because of optimization done in the trace cache, where it is + * no longer possible to identify the original instruction boundaries. If the + * CPU discoverers that the trace cache has been invalidated because of + * unsynchronized cross-modification then instruction execution will be + * aborted with a GPF. Further discussion with Intel revealed that replacing + * the first opcode byte with an int3 would not be subject to this erratum. + * + * So, is cmpxchg reliable? One has to guarantee more than mere atomicity." + * + * Overall design + * + * The algorithm proposed by Intel applies not so well in kernel context: it + * would imply disabling interrupts and looping on every CPUs while modifying + * the code and would not support instrumentation of code called from interrupt + * sources that cannot be disabled. + * + * Therefore, we use a different algorithm to respect Intel's erratum (see the + * quoted discussion above). We make sure that no CPU sees an out-of-date copy + * of a pre-fetched instruction by 1 - using a breakpoint, which skips the + * instruction that is going to be modified, 2 - issuing an IPI to every CPU to + * execute a sync_core(), to make sure that even when the breakpoint is removed, + * no cpu could possibly still have the out-of-date copy of the instruction, + * modify the now unused 2nd byte of the instruction, and then put back the + * original 1st byte of the instruction. + * + * It has exactly the same intent as the algorithm proposed by Intel, but + * it has less side-effects, scales better and supports NMI, SMI and MCE. + * + * Mathieu Desnoyers + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define BREAKPOINT_INSTRUCTION 0xcc +#define BREAKPOINT_INS_LEN 1 +#define NR_NOPS 8 + +static long target_after_int3; /* EIP of the target after the int3 */ +static long bypass_eip; /* EIP of the bypass. */ +static long bypass_after_int3; /* EIP after the end-of-bypass int3 */ +static long after_immediate; /* + * EIP where to resume after the + * single-stepping. + */ + +/* + * Size of the movl instruction (without the immediate value) in bytes. + * The 2 bytes load immediate has a 66H prefix, which makes the opcode 2 bytes + * wide. + */ +static inline size_t _immediate_get_insn_size(long size) +{ + switch (size) { + case 1: return 1; + case 2: return 2; + case 4: return 1; + default: BUG(); + }; +} + +/* + * Internal bypass used during value update. The bypass is skipped by the + * function in which it is inserted. + * No need to be aligned because we exclude readers from the site during + * update. + * Layout is: + * nop nop nop nop nop nop nop nop int3 + * The nops are the target replaced by the instruction to single-step. + */ +static inline void _immediate_bypass(long *bypassaddr, long *breaknextaddr) +{ + asm volatile ( "jmp 2f;\n\t" + "0:\n\t" + ".space 8, 0x90;\n\t" + "1:\n\t" + "int3;\n\t" + "2:\n\t" + "movl $(0b),%0;\n\t" + "movl $((1b)+1),%1;\n\t" + : "=r" (*bypassaddr), + "=r" (*breaknextaddr) : ); +} + +static void immediate_synchronize_core(void *info) +{ + sync_core(); /* use cpuid to stop speculative execution */ +} + +/* + * The eip value points right after the breakpoint instruction, in the second + * byte of the movl. + * Disable preemption in the bypass to make sure no thread will be preempted in + * it. We can then use synchronize_sched() to make sure every bypass users have + * ended. + */ +static int immediate_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + enum die_val die_val = (enum die_val) val; + struct die_args *args = data; + + if (!args->regs || user_mode_vm(args->regs)) + return NOTIFY_DONE; + + if (die_val == DIE_INT3) { + if (args->regs->eip == target_after_int3) { + preempt_disable(); + args->regs->eip = bypass_eip; + return NOTIFY_STOP; + } else if (args->regs->eip == bypass_after_int3) { + args->regs->eip = after_immediate; + preempt_enable(); + return NOTIFY_STOP; + } + } + return NOTIFY_DONE; +} + +static struct notifier_block immediate_notify = { + .notifier_call = immediate_notifier, + .priority = 0x7fffffff, /* we need to be notified first */ +}; + + +/** + * arch_immediate_update - update one immediate value + * @immediate: pointer of type const struct __immediate to update + * + * Update one immediate value. Must be called with immediate_mutex held. + */ +__kprobes int arch_immediate_update(const struct __immediate *immediate) +{ + int ret; + size_t insn_size = _immediate_get_insn_size(immediate->size); + long insn = immediate->immediate - insn_size; + long len; + unsigned long cr0; + +#ifdef CONFIG_KPROBES + /* + * Fail if a kprobe has been set on this instruction. + * (TODO: we could eventually do better and modify all the (possibly + * nested) kprobes for this site if kprobes had an API for this. + */ + if (unlikely(*(unsigned char*)insn == BREAKPOINT_INSTRUCTION)) { + printk(KERN_WARNING "Immediate value in conflict with kprobe. " + "Variable at %p, " + "instruction at %p, size %lu\n", + (void*)immediate->immediate, + (void*)immediate->var, immediate->size); + return -EBUSY; + } +#endif + + /* + * If the variable and the instruction have the same value, there is + * nothing to do. + */ + switch (immediate->size) { + case 1: if (*(uint8_t*)immediate->immediate + == *(uint8_t*)immediate->var) + return 0; + break; + case 2: if (*(uint16_t*)immediate->immediate + == *(uint16_t*)immediate->var) + return 0; + break; + case 4: if (*(uint32_t*)immediate->immediate + == *(uint32_t*)immediate->var) + return 0; + break; + default:return -EINVAL; + } + + _immediate_bypass(&bypass_eip, &bypass_after_int3); + + after_immediate = immediate->immediate + immediate->size; + + /* + * Using the _early variants because nobody is executing the + * bypass code while we patch it. It is protected by the + * immediate_mutex. Since we modify the instructions non atomically (for + * nops), we have to use the _early variant. + * We must however deal with the WP flag in cr0 by ourself. + */ + kernel_wp_save(cr0); + text_poke_early((void*)bypass_eip, (void*)insn, + insn_size + immediate->size); + /* + * Fill the rest with nops. + */ + len = NR_NOPS - immediate->size - insn_size; + add_nops((void*)(bypass_eip + insn_size + immediate->size), len); + kernel_wp_restore(cr0); + + target_after_int3 = insn + BREAKPOINT_INS_LEN; + /* register_die_notifier has memory barriers */ + register_die_notifier(&immediate_notify); + /* The breakpoint will single-step the bypass */ + text_poke((void*)insn, + INIT_ARRAY(unsigned char, BREAKPOINT_INSTRUCTION, 1), 1); + wmb(); + /* + * Execute serializing instruction on each CPU. + * Acts as a memory barrier. + */ + ret = on_each_cpu(immediate_synchronize_core, NULL, 1, 1); + BUG_ON(ret != 0); + + text_poke((void*)(insn + insn_size), (void*)immediate->var, + immediate->size); + wmb(); + text_poke((void*)insn, (unsigned char*)bypass_eip, 1); + /* + * Wait for all int3 handlers to end + * (interrupts are disabled in int3). + * This CPU is clearly not in a int3 handler, + * because int3 handler is not preemptible and + * there cannot be any more int3 handler called + * for this site, because we placed the original + * instruction back. + * synchronize_sched has memory barriers. + */ + synchronize_sched(); + unregister_die_notifier(&immediate_notify); + /* unregister_die_notifier has memory barriers */ + return 0; +} + +/** + * arch_immediate_update_early - update one immediate value at boot time + * @immediate: pointer of type const struct __immediate to update + * + * Update one immediate value at boot time. + */ +void __init arch_immediate_update_early(const struct __immediate *immediate) +{ + /* + * If the variable and the instruction have the same value, there is + * nothing to do. + */ + switch (immediate->size) { + case 1: if (*(uint8_t*)immediate->immediate + == *(uint8_t*)immediate->var) + return; + break; + case 2: if (*(uint16_t*)immediate->immediate + == *(uint16_t*)immediate->var) + return; + break; + case 4: if (*(uint32_t*)immediate->immediate + == *(uint32_t*)immediate->var) + return; + break; + default:return; + } + memcpy((void*)immediate->immediate, (void*)immediate->var, + immediate->size); +} Index: linux-2.6-lttng/arch/i386/kernel/traps.c =================================================================== --- linux-2.6-lttng.orig/arch/i386/kernel/traps.c 2007-09-17 13:37:59.000000000 -0400 +++ linux-2.6-lttng/arch/i386/kernel/traps.c 2007-09-17 13:38:44.000000000 -0400 @@ -601,7 +601,7 @@ fastcall void do_##name(struct pt_regs * } DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->eip) -#ifndef CONFIG_KPROBES +#if !defined(CONFIG_KPROBES) && !defined(CONFIG_IMMEDIATE) DO_VM86_ERROR( 3, SIGTRAP, "int3", int3) #endif DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow) @@ -843,14 +843,14 @@ void restart_nmi(void) acpi_nmi_enable(); } -#ifdef CONFIG_KPROBES +#if defined(CONFIG_KPROBES) || defined(CONFIG_IMMEDIATE) fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code) { if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) return; - /* This is an interrupt gate, because kprobes wants interrupts - disabled. Normal trap handlers don't. */ + /* This is an interrupt gate, because kprobes and immediate values wants + * interrupts disabled. Normal trap handlers don't. */ restore_interrupts(regs); do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL); } -- Mathieu Desnoyers Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/