| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <m1fy18sp5c.fsf@ebiederm.dsl.xmission.com>
Date: Thu, 20 Sep 2007 20:55:43 -0600
From: ebiederm@...ssion.com (Eric W. Biederman)
To: "Huang, Ying" <ying.huang@...el.com>
Cc: Pavel Machek <pavel@....cz>, nigel@...el.suspend2.net,
Andrew Morton <akpm@...ux-foundation.org>,
Jeremy Maitin-Shepard <jbms@....edu>,
linux-kernel@...r.kernel.org, linux-pm@...ts.linux-foundation.org,
Kexec Mailing List <kexec@...ts.infradead.org>
Subject: Re: [RFC][PATCH 1/2 -mm] kexec based hibernation -v3: kexec jump
"Huang, Ying" <ying.huang@...el.com> writes:
> This patch implements the functionality of jumping between the kexeced
> kernel and the original kernel.
>
> A new reboot command named LINUX_REBOOT_CMD_KJUMP is defined to
> trigger the jumping to (executing) the new kernel and jumping back to
> the original kernel.
>
> To support jumping between two kernels, before jumping to (executing)
> the new kernel and jumping back to the original kernel, the devices
> are put into quiescent state (to be fully implemented),
Well this we have an implementation of (it's called shutdown) or does
that method not do enough to meet the requirements of hibernation.
If at all possible I would like to keep reboot, kexec and kexec+return
all using the same device driver methods.
> and the state of devices and CPU is saved.
Makes a reasonable amount of sense. We do need to save whatever
state we cannot recover just be reprogramming the hardware.
As long as the drivers are built so this is a good place for a
hot remove to happen we should be in good shape.
> After jumping back from kexeced kernel
> and jumping to the new kernel, the state of devices and CPU are
> restored accordingly. The devices/CPU state save/restore code of
> software suspend is called to implement corresponding function.
At least for now that sounds like a reasonable work around.
I don't think we want to merge this code until we have agreed upon
how the new device_detach and device_reattach (or whatever we call the
device methods for hibernate) are to be implemented.
> To support jumping without preserving memory. One shadow backup page
> is allocated for each page used by new (kexeced) kernel.
That does not sound correct. The current implementation of kexec_load
does allocate a source page and give it a destination page and usually
those two pages are different. But if our memory allocations happen
to return a destination page there we use it directly, making no
copy necessary.
I think we are talking about the same thing but I'm not certain
you have thought about the case where your shadow backup page happens
to be the same as current page.
> When do
> kexec_load, the image of new kernel is loaded into shadow pages,
Ok. This sounds like the existing implementation. Except it
depending on your destination it may force the address.
> and
> before executing, the original pages and the shadow pages are swapped,
> so the contents of original pages are backuped.
Yes. Unless we happen to have everything allocated on the same page.
Does your code handle that case? I know the generic kexec code will
pass lists like that in the proper circumstances. Especially for
the kexec on panic case.
> Before jumping to the
> new (kexeced) kernel and after jumping back to the original kernel,
> the original pages and the shadow pages are swapped too.
Yes. That sounds right.
> A jump back protocol is defined and documented.
Bleh. We do need to document the requirements but we don't need a
versioned monster. And we don't need to be exposing implementation
details in that documentation.
In the kexec world /sbin/kexec or another user space caller is
responsible for passing information to our callers.
To be polite we need to document more but the jump back protocol
really should be as if the entry point kexec handed control to did
a subroutine return.
> Known issues
>
> - A field is added to Linux kernel real-mode header. This is
> temporary, and should be replaced after the 32-bit boot protocol and
> setup data patches are accepted.
It shouldn't be needed.
> - The suspend method of device is used to put device in quiescent
> state. But if the ACPI is enabled this will also put devices into
> low power state, which prevent the new kernel from booting. So, the
> ACPI must be disabled both in original kernel and kexeced
> kernel. This is planed to be resolved after the suspend method and
> hibernate method is separated for device as proposed earlier in the
> LKML.
Reasonable.
> - The NX (none executable) bit should be turned off for the control
> page if available.
Why don't we have a problem with this in the normal kexec case?
More comments below.
> Signed-off-by: Huang Ying <ying.huang@...el.com>
>
> ---
>
> Documentation/i386/jump_back_protocol.txt | 81 ++++++++++++
> arch/i386/Kconfig | 7 +
> arch/i386/boot/header.S | 2
> arch/i386/kernel/machine_kexec.c | 77 +++++++++---
> arch/i386/kernel/relocate_kernel.S | 187 ++++++++++++++++++++++++++----
> arch/i386/kernel/setup.c | 3
> include/asm-i386/bootparam.h | 3
> include/asm-i386/kexec.h | 48 ++++++-
> include/linux/kexec.h | 9 +
> include/linux/reboot.h | 2
> kernel/kexec.c | 59 +++++++++
> kernel/ksysfs.c | 17 ++
> kernel/power/Kconfig | 2
> kernel/sys.c | 8 +
> 14 files changed, 463 insertions(+), 42 deletions(-)
>
> Index: linux-2.6.23-rc6/arch/i386/kernel/machine_kexec.c
> ===================================================================
> --- linux-2.6.23-rc6.orig/arch/i386/kernel/machine_kexec.c 2007-09-20
> 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/arch/i386/kernel/machine_kexec.c 2007-09-20
> 11:24:31.000000000 +0800
> @@ -20,6 +20,7 @@
> #include <asm/cpufeature.h>
> #include <asm/desc.h>
> #include <asm/system.h>
> +#include <asm/setup.h>
Please remove the unnecessary and incorrect include.
> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
> static u32 kexec_pgd[1024] PAGE_ALIGNED;
> @@ -98,23 +99,23 @@
> {
> }
>
> -/*
> - * Do not allocate memory (or fail in any way) in machine_kexec().
> - * We are past the point of no return, committed to rebooting now.
> - */
> -NORET_TYPE void machine_kexec(struct kimage *image)
> +static NORET_TYPE void __machine_kexec(struct kimage *image,
> + void *control_page) ATTRIB_NORET;
> +
> +static NORET_TYPE void __machine_kexec(struct kimage *image,
> + void *control_page)
> {
It looks like we are doing swap_pages unconditionally so I don't
see why we need to versions of this function.
And it looks like the NORET_TYPE is no longer an accurate description.
> unsigned long page_list[PAGES_NR];
> - void *control_page;
> -
> - /* Interrupts aren't acceptable while we reboot */
> - local_irq_disable();
> -
> - control_page = page_address(image->control_code_page);
> - memcpy(control_page, relocate_kernel, PAGE_SIZE);
> + asmlinkage NORET_TYPE void
> + (*relocate_kernel_ptr)(unsigned long indirection_page,
> + unsigned long control_page,
> + unsigned long start_address,
> + unsigned int has_pae) ATTRIB_NORET;
>
> + relocate_kernel_ptr = control_page +
> + ((void *)relocate_kernel - (void *)relocate_page);
> page_list[PA_CONTROL_PAGE] = __pa(control_page);
> - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
> + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
> page_list[PA_PGD] = __pa(kexec_pgd);
> page_list[VA_PGD] = (unsigned long)kexec_pgd;
> #ifdef CONFIG_X86_PAE
> @@ -127,6 +128,7 @@
> page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
> page_list[PA_PTE_1] = __pa(kexec_pte1);
> page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
> + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
>
> /* The segment registers are funny things, they have both a
> * visible and an invisible part. Whenever the visible part is
> @@ -145,8 +147,26 @@
> set_idt(phys_to_virt(0),0);
>
> /* now call it */
> - relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
> - image->start, cpu_has_pae);
> + relocate_kernel_ptr((unsigned long)image->head,
> + (unsigned long)page_list,
> + image->start, cpu_has_pae);
> +}
> +
> +/*
> + * Do not allocate memory (or fail in any way) in machine_kexec().
> + * We are past the point of no return, committed to rebooting now.
> + */
> +NORET_TYPE void machine_kexec(struct kimage *image)
> +{
> + void *control_page;
> +
> + /* Interrupts aren't acceptable while we reboot */
> + local_irq_disable();
> +
> + control_page = page_address(image->control_code_page);
> + memcpy(control_page, relocate_page, PAGE_SIZE);
> +
> + __machine_kexec(image, control_page);
> }
>
> /* crashkernel=size@...r specifies the location to reserve for
> @@ -182,3 +202,30 @@
> #endif
> }
>
> +#ifdef CONFIG_KEXEC_JUMP
> +int machine_kexec_jump(struct kimage *image)
> +{
> + void *control_page;
> + unsigned long pa_control_page;
> +
> + control_page = page_address(image->control_code_page);
> + memcpy(control_page, relocate_page, PAGE_SIZE/2);
> + pa_control_page = __pa(control_page);
> + memcpy(control_page + 1, &pa_control_page, sizeof(pa_control_page));
> +
> + KJUMP_MAGIC(control_page) = KJUMP_MAGIC_NUMBER;
> + KJUMP_VERSION(control_page) = KJUMP_VERSION_NUMBER;
This bit really looks wrong. It is for /sbin/kexec to provide this
kind of interface.
> +
> + if (!kexec_jump_save_cpu(control_page))
> + __machine_kexec(image, control_page);
> +
> + kexec_jump_back_entry = KJUMP_ENTRY(control_page);
> + image->start = kexec_jump_back_entry;
> + return 0;
> +}
> +
> +void __init parse_kexec_jump_back_entry(void)
> +{
> + kexec_jump_back_entry = boot_params.hdr.jump_back_entry;
> +}
> +#endif /* CONFIG_KEXEC_JUMP */
> Index: linux-2.6.23-rc6/include/asm-i386/kexec.h
> ===================================================================
> --- linux-2.6.23-rc6.orig/include/asm-i386/kexec.h 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/include/asm-i386/kexec.h 2007-09-20 11:24:31.000000000
> +0800
> @@ -9,16 +9,42 @@
> #define VA_PTE_0 5
> #define PA_PTE_1 6
> #define VA_PTE_1 7
> +#define PA_SWAP_PAGE 8
> #ifdef CONFIG_X86_PAE
> -#define PA_PMD_0 8
> -#define VA_PMD_0 9
> -#define PA_PMD_1 10
> -#define VA_PMD_1 11
> -#define PAGES_NR 12
> +#define PA_PMD_0 9
> +#define VA_PMD_0 10
> +#define PA_PMD_1 11
> +#define VA_PMD_1 12
> +#define PAGES_NR 13
> #else
> -#define PAGES_NR 8
> +#define PAGES_NR 9
> #endif
>
> +#define KJUMP_DATA_BASE 0x800
> +
> +#define KJUMP_MAGIC_NUMBER 0x626a
> +#define KJUMP_VERSION_NUMBER 0x0100
> +
> +#define KJUMP_DATA(buf) ((unsigned char *)(buf)+KJUMP_DATA_BASE)
> +#define KJUMP_OFF(off) (KJUMP_DATA_BASE+(off))
> +
> +#define KJUMP_MAGIC_OFF KJUMP_OFF(0x0)
> +#define KJUMP_MAGIC(buf) (*(unsigned short *)(KJUMP_DATA(buf)+0x0))
> +#define KJUMP_VERSION(buf) (*(unsigned short *)(KJUMP_DATA(buf)+0x2))
> +#define KJUMP_BACKUP_PAGES_MAP_OFF \
> + KJUMP_OFF(0x4)
> +#define KJUMP_BACKUP_PAGES_MAP(buf) \
> + (*(unsigned long *)(KJUMP_DATA(buf)+0x4))
> +
> +/*
> + * The following are not a part of jump back protocol, for internal
> + * use only
> + */
> +#define KJUMP_ENTRY_OFF KJUMP_OFF(0x20)
> +#define KJUMP_ENTRY(buf) (*(unsigned long *)(KJUMP_DATA(buf)+0x20))
> +/* Other internal data fields base */
> +#define KJUMP_OTHER_OFF KJUMP_OFF(0x24)
> +
> #ifndef __ASSEMBLY__
>
> #include <asm/ptrace.h>
> @@ -94,6 +120,16 @@
> unsigned long start_address,
> unsigned int has_pae) ATTRIB_NORET;
>
> +extern char relocate_page[PAGE_SIZE];
> +
> +extern asmlinkage int kexec_jump_save_cpu(void *buf);
> +
> +#ifdef CONFIG_KEXEC_JUMP
> +void parse_kexec_jump_back_entry(void);
> +#else
> +static inline void parse_kexec_jump_back_entry(void) { }
> +#endif
> +
> #endif /* __ASSEMBLY__ */
>
> #endif /* _I386_KEXEC_H */
> Index: linux-2.6.23-rc6/include/linux/kexec.h
> ===================================================================
> --- linux-2.6.23-rc6.orig/include/linux/kexec.h 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/include/linux/kexec.h 2007-09-20 11:26:03.000000000 +0800
> @@ -83,6 +83,7 @@
>
> unsigned long start;
> struct page *control_code_page;
> + struct page *swap_page;
Ok. This looks reasonable. So we can reorder the pages in a non-destructive
way.
> unsigned long nr_segments;
> struct kexec_segment segment[KEXEC_SEGMENT_MAX];
> @@ -194,4 +195,12 @@
> static inline void crash_kexec(struct pt_regs *regs) { }
> static inline int kexec_should_crash(struct task_struct *p) { return 0; }
> #endif /* CONFIG_KEXEC */
> +
> +#ifdef CONFIG_KEXEC_JUMP
> +extern int machine_kexec_jump(struct kimage *image);
> +extern unsigned long kexec_jump_back_entry;
> +extern int kexec_jump(void);
> +#else /* !CONFIG_KEXEC_JUMP */
> +static inline int kexec_jump(void) { return 0; }
> +#endif /* CONFIG_KEXEC_JUMP */
> #endif /* LINUX_KEXEC_H */
> Index: linux-2.6.23-rc6/kernel/kexec.c
> ===================================================================
> --- linux-2.6.23-rc6.orig/kernel/kexec.c 2007-09-20 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/kernel/kexec.c 2007-09-20 11:24:31.000000000 +0800
> @@ -24,6 +24,10 @@
> #include <linux/utsrelease.h>
> #include <linux/utsname.h>
> #include <linux/numa.h>
> +#include <linux/suspend.h>
> +#include <linux/pm.h>
> +#include <linux/cpu.h>
> +#include <linux/console.h>
>
> #include <asm/page.h>
> #include <asm/uaccess.h>
> @@ -243,6 +247,12 @@
> goto out;
> }
>
> + image->swap_page = kimage_alloc_control_pages(image, 0);
> + if (!image->swap_page) {
> + printk(KERN_ERR "Could not allocate swap buffer\n");
> + goto out;
> + }
> +
> result = 0;
> out:
> if (result == 0)
> @@ -1246,3 +1256,52 @@
> }
>
> module_init(crash_save_vmcoreinfo_init)
> +
> +#ifdef CONFIG_KEXEC_JUMP
> +unsigned long kexec_jump_back_entry;
> +
> +int kexec_jump(void)
> +{
> + int error;
> +
> + if (!kexec_image)
> + return -EINVAL;
> +
> + pm_prepare_console();
> + suspend_console();
> + error = device_suspend(PMSG_FREEZE);
> + if (error)
> + goto Resume_console;
> + error = disable_nonboot_cpus();
> + if (error)
> + goto Resume_devices;
> + local_irq_disable();
> + /* At this point, device_suspend() has been called, but *not*
> + * device_power_down(). We *must* device_power_down() now.
> + * Otherwise, drivers for some devices (e.g. interrupt controllers)
> + * become desynchronized with the actual state of the hardware
> + * at resume time, and evil weirdness ensues.
> + */
> + error = device_power_down(PMSG_FREEZE);
> + if (error)
> + goto Enable_irqs;
> +
> + save_processor_state();
> + error = machine_kexec_jump(kexec_image);
> + restore_processor_state();
> +
> + /* NOTE: device_power_up() is just a resume() for devices
> + * that suspended with irqs off ... no overall powerup.
> + */
> + device_power_up();
> + Enable_irqs:
> + local_irq_enable();
> + enable_nonboot_cpus();
> + Resume_devices:
> + device_resume();
> + Resume_console:
> + resume_console();
> + pm_restore_console();
> + return error;
> +}
> +#endif /* CONFIG_KEXEC_JUMP */
> Index: linux-2.6.23-rc6/kernel/ksysfs.c
> ===================================================================
> --- linux-2.6.23-rc6.orig/kernel/ksysfs.c 2007-09-20 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/kernel/ksysfs.c 2007-09-20 11:24:31.000000000 +0800
> @@ -69,6 +69,20 @@
> }
> KERNEL_ATTR_RO(vmcoreinfo);
>
> +#ifdef CONFIG_KEXEC_JUMP
> +static ssize_t kexec_jump_back_entry_show(struct kset *kset, char *page)
> +{
> + return sprintf(page, "0x%lx\n", kexec_jump_back_entry);
> +}
> +static ssize_t kexec_jump_back_entry_store(struct kset *kset, const char *page,
> + size_t count)
> +{
> + kexec_jump_back_entry = simple_strtoul(page, NULL, 0);
> + return count;
> +}
> +
> +KERNEL_ATTR_RW(kexec_jump_back_entry);
> +#endif /* CONFIG_KEXEC_JUMP */
> #endif /* CONFIG_KEXEC */
>
> /*
> @@ -105,6 +119,9 @@
> &kexec_loaded_attr.attr,
> &kexec_crash_loaded_attr.attr,
> &vmcoreinfo_attr.attr,
> +#ifdef CONFIG_KEXEC_JUMP
> + &kexec_jump_back_entry_attr.attr,
> +#endif
We should not need this.
> #endif
> NULL
> };
> Index: linux-2.6.23-rc6/kernel/sys.c
> ===================================================================
> --- linux-2.6.23-rc6.orig/kernel/sys.c 2007-09-20 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/kernel/sys.c 2007-09-20 11:24:31.000000000 +0800
> @@ -424,6 +424,14 @@
> unlock_kernel();
> return -EINVAL;
>
> + case LINUX_REBOOT_CMD_KEXEC_JUMP:
> + {
> + int ret;
> + ret = kexec_jump();
> + unlock_kernel();
> + return ret;
> + }
> +
> #ifdef CONFIG_HIBERNATION
> case LINUX_REBOOT_CMD_SW_SUSPEND:
> {
> Index: linux-2.6.23-rc6/include/linux/reboot.h
> ===================================================================
> --- linux-2.6.23-rc6.orig/include/linux/reboot.h 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/include/linux/reboot.h 2007-09-20 11:24:31.000000000 +0800
> @@ -23,6 +23,7 @@
> * RESTART2 Restart system using given command string.
> * SW_SUSPEND Suspend system using software suspend if compiled in.
> * KEXEC Restart system using a previously loaded Linux kernel
> + * KEXEC_JUMP Jump between original kernel and kexeced kernel.
> */
>
> #define LINUX_REBOOT_CMD_RESTART 0x01234567
> @@ -33,6 +34,7 @@
> #define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
> #define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
> #define LINUX_REBOOT_CMD_KEXEC 0x45584543
> +#define LINUX_REBOOT_CMD_KEXEC_JUMP 0x3928A5FD
I'm still not quite convinced that we need a separate entry point for this.
But until we split out the hibernation methods, it seems reasonable.
>
> #ifdef __KERNEL__
> Index: linux-2.6.23-rc6/arch/i386/Kconfig
> ===================================================================
> --- linux-2.6.23-rc6.orig/arch/i386/Kconfig 2007-09-20 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/arch/i386/Kconfig 2007-09-20 11:24:31.000000000 +0800
> @@ -830,6 +830,13 @@
> (CONFIG_RELOCATABLE=y).
> For more details see Documentation/kdump/kdump.txt
>
> +config KEXEC_JUMP
> + bool "kexec jump (EXPERIMENTAL)"
> + depends on EXPERIMENTAL
> + depends on PM && X86_32 && KEXEC
> + ---help---
> + Jump between the kexeced kernel and the orignal kernel.
> +
> config PHYSICAL_START
> hex "Physical address where the kernel is loaded" if (EMBEDDED ||
> CRASH_DUMP)
> default "0x1000000" if X86_NUMAQ
> Index: linux-2.6.23-rc6/kernel/power/Kconfig
> ===================================================================
> --- linux-2.6.23-rc6.orig/kernel/power/Kconfig 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/kernel/power/Kconfig 2007-09-20 11:24:31.000000000 +0800
> @@ -70,7 +70,7 @@
>
> config PM_SLEEP
> bool
> - depends on SUSPEND || HIBERNATION
> + depends on SUSPEND || HIBERNATION || KEXEC_JUMP
> default y
>
> config SUSPEND_UP_POSSIBLE
> Index: linux-2.6.23-rc6/arch/i386/kernel/relocate_kernel.S
> ===================================================================
> --- linux-2.6.23-rc6.orig/arch/i386/kernel/relocate_kernel.S 2007-09-20
> 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/arch/i386/kernel/relocate_kernel.S 2007-09-20
> 11:24:31.000000000 +0800
> @@ -19,8 +19,87 @@
> #define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
> #define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */
>
> +#define STACK_TOP 0x1000
> +
> +#define DATA(offset) (KJUMP_OTHER_OFF+(offset))
> +
> +/* Minimal CPU stat */
> +#define EBX DATA(0x0)
> +#define ESI DATA(0x4)
> +#define EDI DATA(0x8)
> +#define EBP DATA(0xc)
> +#define ESP DATA(0x10)
> +#define CR0 DATA(0x14)
> +#define CR3 DATA(0x18)
> +#define CR4 DATA(0x1c)
> +#define FLAG DATA(0x20)
> +#define RET DATA(0x24)
> +
> +/* some information saved in control page (CP) for jumping back */
> +#define CP_VA_CONTROL_PAGE DATA(0x30)
> +#define CP_PA_PGD DATA(0x34)
> +#define CP_PA_SWAP_PAGE DATA(0x38)
> +
> .text
> .align PAGE_ALIGNED
> + .globl relocate_page
> +relocate_page:
> +
> +/*
> + * Entry point for jumping back from kexeced kernel, the paging is
> + * turned off, the information needed is at relocate_page +
> + * PAGE_SIZE/2
> + */
> +kexec_jump_back_entry:
> + movl $relocate_page, %ebx
> + movl %edi, KJUMP_ENTRY_OFF(%ebx)
> + movl CP_VA_CONTROL_PAGE(%ebx), %edi
> +
> + lea STACK_TOP(%ebx), %esp
> +
> + movl CP_PA_SWAP_PAGE(%ebx), %eax
> + movl KJUMP_BACKUP_PAGES_MAP_OFF(%ebx), %edx
> + pushl %eax
> + pushl %edx
> + call swap_pages
> + addl $8, %esp
> +
> + movl CP_PA_PGD(%ebx), %eax
> + movl %eax, %cr3
> +
> + movl %cr0, %eax
> + orl $(1<<31), %eax
> + movl %eax, %cr0
> +
> + movl %edi, %esp
> + addl $STACK_TOP, %esp
> +
> + movl %edi, %eax
> + addl $(virtual_mapped - relocate_page), %eax
> + pushl %eax
> + ret
> +
> +virtual_mapped:
> + movl %edi, %edx
> + movl EBX(%edx), %ebx
> + movl ESI(%edx), %esi
> + movl EDI(%edx), %edi
> + movl EBP(%edx), %ebp
> + movl FLAG(%edx), %eax
> + pushl %eax
> + popf
> + movl ESP(%edx), %esp
> + movl CR4(%edx), %eax
> + movl %eax, %cr4
> + movl CR3(%edx), %eax
> + movl %eax, %cr3
> + movl CR0(%edx), %eax
> + movl %eax, %cr0
> + movl RET(%edx), %eax
> + movl %eax, (%esp)
> + mov $1, %eax
> + ret
> +
> .globl relocate_kernel
> relocate_kernel:
> movl 8(%esp), %ebp /* list of pages */
> @@ -146,6 +225,15 @@
> pushl $0
> popfl
>
> + /* save some information for jumping back */
> + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi
> + movl %edi, CP_VA_CONTROL_PAGE(%edi)
> + movl PTR(PA_PGD)(%ebp), %eax
> + movl %eax, CP_PA_PGD(%edi)
> + movl PTR(PA_SWAP_PAGE)(%ebp), %eax
> + movl %eax, CP_PA_SWAP_PAGE(%edi)
> + movl %ebx, KJUMP_BACKUP_PAGES_MAP_OFF(%edi)
> +
> /* get physical address of control page now */
> /* this is impossible after page table switch */
> movl PTR(PA_CONTROL_PAGE)(%ebp), %edi
> @@ -155,11 +243,11 @@
> movl %eax, %cr3
>
> /* setup a new stack at the end of the physical control page */
> - lea 4096(%edi), %esp
> + lea STACK_TOP(%edi), %esp
>
> /* jump to identity mapped page */
> movl %edi, %eax
> - addl $(identity_mapped - relocate_kernel), %eax
> + addl $(identity_mapped - relocate_page), %eax
> pushl %eax
> ret
>
> @@ -197,8 +285,44 @@
> xorl %eax, %eax
> movl %eax, %cr3
>
> + movl CP_PA_SWAP_PAGE(%edi), %eax
> + pushl %eax
> + pushl %ebx
> + call swap_pages
> + addl $8, %esp
> +
> + /* To be certain of avoiding problems with self-modifying code
> + * I need to execute a serializing instruction here.
> + * So I flush the TLB, it's handy, and not processor dependent.
> + */
> + xorl %eax, %eax
> + movl %eax, %cr3
> +
> + /* set all of the registers to known values */
> + /* leave %esp alone */
> +
> + movw KJUMP_MAGIC_OFF(%edi), %ax
> + cmpw $KJUMP_MAGIC_NUMBER, %ax
> + jz 1f
> + xorl %edi, %edi
> +1:
> + xorl %eax, %eax
> + xorl %ebx, %ebx
> + xorl %ecx, %ecx
> + xorl %edx, %edx
> + xorl %esi, %esi
> + xorl %ebp, %ebp
> + ret
> +
> /* Do the copies */
> - movl %ebx, %ecx
> +swap_pages:
> + movl 8(%esp), %edx
> + movl 4(%esp), %ecx
> + pushl %ebp
> + pushl %ebx
> + pushl %edi
> + pushl %esi
> + movl %ecx, %ebx
> jmp 1f
>
> 0: /* top, read another word from the indirection page */
> @@ -226,27 +350,50 @@
> movl %ecx, %esi /* For every source page do a copy */
> andl $0xfffff000, %esi
>
> + movl %edi, %eax
> + movl %esi, %ebp
> +
> + movl %edx, %edi
> movl $1024, %ecx
> rep ; movsl
> - jmp 0b
>
> -3:
> + movl %ebp, %edi
> + movl %eax, %esi
> + movl $1024, %ecx
> + rep ; movsl
>
> - /* To be certain of avoiding problems with self-modifying code
> - * I need to execute a serializing instruction here.
> - * So I flush the TLB, it's handy, and not processor dependent.
> - */
> - xorl %eax, %eax
> - movl %eax, %cr3
> + movl %eax, %edi
> + movl %edx, %esi
> + movl $1024, %ecx
> + rep ; movsl
>
> - /* set all of the registers to known values */
> - /* leave %esp alone */
> + lea 4096(%ebp), %esi
> + jmp 0b
> +3:
> + popl %esi
> + popl %edi
> + popl %ebx
> + popl %ebp
> + ret
>
> - xorl %eax, %eax
> - xorl %ebx, %ebx
> - xorl %ecx, %ecx
> - xorl %edx, %edx
> - xorl %esi, %esi
> - xorl %edi, %edi
> - xorl %ebp, %ebp
> + .globl kexec_jump_save_cpu
> +kexec_jump_save_cpu:
> + movl 4(%esp), %edx
> + movl %ebx, EBX(%edx)
> + movl %esi, ESI(%edx)
> + movl %edi, EDI(%edx)
> + movl %ebp, EBP(%edx)
> + movl %esp, ESP(%edx)
> + movl %cr0, %eax
> + movl %eax, CR0(%edx)
> + movl %cr3, %eax
> + movl %eax, CR3(%edx)
> + movl %cr4, %eax
> + movl %eax, CR4(%edx)
> + pushf
> + popl %eax
> + movl %eax, FLAG(%edx)
> + movl (%esp), %eax
> + movl %eax, RET(%edx)
> + mov $0, %eax
> ret
> Index: linux-2.6.23-rc6/include/asm-i386/bootparam.h
> ===================================================================
> --- linux-2.6.23-rc6.orig/include/asm-i386/bootparam.h 2007-09-20
> 11:24:25.000000000 +0800
> +++ linux-2.6.23-rc6/include/asm-i386/bootparam.h 2007-09-20 11:24:31.000000000
> +0800
> @@ -41,6 +41,9 @@
> u32 initrd_addr_max;
> u32 kernel_alignment;
> u8 relocatable_kernel;
> + u8 _pad2[3];
> + u32 cmdline_size;
> + u32 jump_back_entry;
> } __attribute__((packed));
>
> struct sys_desc_table {
> Index: linux-2.6.23-rc6/arch/i386/boot/header.S
> ===================================================================
> --- linux-2.6.23-rc6.orig/arch/i386/boot/header.S 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/arch/i386/boot/header.S 2007-09-20 11:24:31.000000000 +0800
> @@ -214,6 +214,8 @@
> #added with boot protocol
> #version 2.06
>
> +jump_back_entry: .long 0 #jump back entry point
Please no.
> +
> # End of setup header #####################################################
>
> .section ".inittext", "ax"
> Index: linux-2.6.23-rc6/arch/i386/kernel/setup.c
> ===================================================================
> --- linux-2.6.23-rc6.orig/arch/i386/kernel/setup.c 2007-09-20 11:24:25.000000000
> +0800
> +++ linux-2.6.23-rc6/arch/i386/kernel/setup.c 2007-09-20 13:14:19.000000000
> +0800
> @@ -60,6 +60,7 @@
> #include <asm/ist.h>
> #include <asm/io.h>
> #include <asm/vmi.h>
> +#include <asm/kexec.h>
> #include <setup_arch.h>
> #include <bios_ebda.h>
>
> @@ -566,6 +567,8 @@
> data_resource.start = virt_to_phys(_etext);
> data_resource.end = virt_to_phys(_edata)-1;
>
> + parse_kexec_jump_back_entry();
> +
Why do we need to touch setup.c?
> parse_early_param();
>
> if (user_defined_memmap) {
> Index: linux-2.6.23-rc6/Documentation/i386/jump_back_protocol.txt
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6.23-rc6/Documentation/i386/jump_back_protocol.txt 2007-09-20
> 11:24:31.000000000 +0800
> @@ -0,0 +1,81 @@
> + THE LINUX/I386 JUMP BACK PROTOCOL
> + ---------------------------------
> +
> + Huang Ying <ying.huang@...el.com>
> + Last update 2007-09-19
> +
> +Currently, the following versions of the jump back protocol exist.
> +
> +Protocol 1.00: Jumping between original kernel and kexeced kernel
> + support.
> +
> +
> +**** LOAD THE JUMP BACK IMAGE
> +
> +Jump back image is an ordinary ELF 64 executable file, it can be
> +loaded just as other ELF64 image. That is, the PT_LOAD segments should
> +be loaded into their physical address.
> +
> +Before loading all segments of jump back image, the jump back header
> +should be checked. Jump back header can be loaded from the 4K page at
> +the jump back entry in jump back image.
> +
> +The header looks like:
> +
> +Offset Proto Name Meaning
> +/Size
> +
> +C00/2 1.00+ magic Magic number: 0x626A
> +C02/2 1.00+ version Jump back protocol version
> +C04/4 1.00+ backup_pages_map Map from target page to backup page
> +
> +Note: unlike ordinary ELF 64 file, the jump back image may occupy most
> +memory pages, so it is important for loader to verify there is no
> +conflict between pages of loaded image and pages used by loader
> +itself.
> +
> +
> +**** DETAILS OF JUMP BACK HEADER
> +
> +For each field, some are information from the jump back image to
> +loader ("read"), some are expected to be filled out by the loader
> +("write"), and some are expected to be read and modified by the loader
> +("modify").
> +
> +All general purpose boot loaders should write the fields marked
> +(obligatory).
> +
> +The byte order of all fields is little endian.
> +
> +Field name: magic
> +Type: read
> +Offset/size: 0xc00/2
> +Protocol: 1.00+
> +
> + Contains the magic number "jb" (0x626A)
> +
> +Field name: version
> +Type: read
> +Offset/size: 0xc02/2
> +Protocol: 1.00+
> +
> + Contains the version number, in (major << 8)+minor format,
> + e.g. 0x0100 for version 1.00.
> +
> +Field name: backup_pages_map
> +Type: read
> +Offset/size: 0xc04/4
> +Protocol: 1.00+
> +
> + The map from target address to backup address, it is kimage->head in
> + fact.
> + TODO: detailed description
This is an implementation detail that we should not need to export.
I do think having a specification of the requirements for returning to
the kexec kernel makes sense. I don't however believe that we need to
pass any information. The map of the pages that matter is simply
the memory the kernel is using from /proc/iomem - the memory that
your image you are loading with kexec is using.
All of that information we can pass in /sbin/kexec and should not
need to do directly from the kernel.
The following piece of code should be always be a valid kexec on
jump user and test case.
test_kexec_jump_payload:
ret
A standard subroutine call return on whichever architecture we are
working on should be sufficient.
For the registers and the segments we should define which ones
should be hard coded, and which ones should be saved.
Hard coded:
%ss, %cs, %ds (4G flat with 0 base)
Callee save:
%esp
%edi
(And whichever ones we care about)
It does make some sense to use the standard kernel argument passing sequence
for bootloaders and what not. But the wrapper in /sbin/kexec should do that
not the kernel itself.
> +
> +**** JUMP BACK TO THE JUMP BACK IMAGE
> +
> +To jump back to the jump back image, just jump to the jump back
> +entry. At entry, the CPU must be in 32-bit protected mode with paging
> +disabled; the CS, DS and SS must be 4G flat segments; if jumping back
> +to loader is supported, %edi should be the jump back entry of loader,
> +otherwise it should be zero.
Eric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists