Linux version 2.6.22-gf2d98ae6 (jpo@jpo-laptop) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #12 SMP Wed Sep 26 12:45:21 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001e7b0000 (usable)
 BIOS-e820: 000000001e7b0000 - 000000001e7bffc0 (ACPI data)
 BIOS-e820: 000000001e7bffc0 - 000000001e7c0000 (ACPI NVS)
 BIOS-e820: 0000000040400000 - 0000000040440004 (reserved)
 BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
487MB LOWMEM available.
Entering add_active_range(0, 0, 124848) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   124848
  HighMem    124848 ->   124848
early_node_map[1] active PFN ranges
    0:        0 ->   124848
On node 0 totalpages: 124848
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 943 pages used for memmap
  Normal zone: 119809 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI not present or invalid.
Using APIC driver default
ACPI: RSDP 000E9010, 0014 (r0 OID_00)
ACPI: RSDT 1E7B2AE0, 0030 (r1 AMD    RSDT_000 31303030 AMD  31303030)
ACPI: FACP 1E7B29E0, 0084 (r1 AMD    FACP_000 31303030 AMD  31303030)
ACPI: DSDT 1E7B0000, 29D6 (r1 INSYDE CS553x       1007 INTL 20030122)
ACPI: FACS 1E7BFFC0, 0040
ACPI: BOOT 1E7B2A70, 0028 (r1 AMD    BOOT_000 31303030 AMD  31303030)
ACPI: DBGP 1E7B2AA0, 0034 (r1 AMD    DBGP_000 31303030 AMD  31303030)
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 50000000 (gap: 40440004:afbbfffc)
Built 1 zonelists.  Total pages: 123873
Kernel command line: BOOT_IMAGE=Linux2623 ro root=341
No local APIC present or hardware disabled
mapped APIC to ffffd000 (013dc000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 498.434 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 488944k/499392k available (3041k kernel code, 9872k reserved, 1517k data, 292k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdf000000 - 0xff7fe000   ( 519 MB)
    lowmem  : 0xc0000000 - 0xde7b0000   ( 487 MB)
      .init : 0xc057b000 - 0xc05c4000   ( 292 kB)
      .data : 0xc03f86e0 - 0xc0573ecc   (1517 kB)
      .text : 0xc0100000 - 0xc03f86e0   (3041 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 998.38 BogoMIPS (lpj=1996769)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: After all inits, caps: 0088a93d c0c0a13d 00000000 00000000 00000000 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 18k freed
CPU0: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xff8b7, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Firmware left 0000:00:13.0 e100 interrupts enabled, disabling
PCI: Using IRQ router default [1022/2090] at 0000:00:0f.0
Time: tsc clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Simple Boot Flag at 0x3f set to 0x1
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:00:01.1
Real Time Clock Driver v1.12ac
AMD Geode RNG detected
Linux agpgart interface v0.102 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250.0: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
serial8250.0: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
PCI: Guessed IRQ 10 for device 0000:00:12.0
e1000: 0000:00:12.0: e1000_probe: (PCI:33MHz:32-bit) 00:30:59:03:89:5e
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
PCI: Guessed IRQ 10 for device 0000:00:13.0
PCI: Sharing IRQ 10 with 0000:00:01.1
PCI: Sharing IRQ 10 with 0000:00:01.2
PCI: Sharing IRQ 10 with 0000:00:11.0
e100: eth1: e100_probe: addr 0xef600000, irq 10, MAC addr 00:30:59:03:86:9F
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
    ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:pio, hdb:DMA
Probing IDE interface ide0...
hdb: SILICONSYSTEMS INC 1GB, ATA DISK drive
hdb: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdb: max request size: 128KiB
hdb: 2046240 sectors (1047 MB) w/0KiB Cache, CHS=2030/16/63, DMA
 hdb: hdb1
3ware Storage Controller device driver for Linux v1.26.02.002.
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
PCI: Guessed IRQ 11 for device 0000:00:0f.5
PCI: Sharing IRQ 11 with 0000:00:0f.4
PCI: Setting latency timer of device 0000:00:0f.5 to 64
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefb00000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Guessed IRQ 11 for device 0000:00:0f.4
PCI: Sharing IRQ 11 with 0000:00:0f.5
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 11, io mem 0xeff00000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 2-4: new low speed USB device using ohci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: HID 04d9:1400 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:0f.4-4
input: HID 04d9:1400 as /class/input/input1
input: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:0f.4-4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Processor cpuid 5a2 not supported
Using IPI Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 292k freed
scsi 0:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 1980416 512-byte hardware sectors (1014 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 1980416 512-byte hardware sectors (1014 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready