[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <64bb37e0709262314x1b0100d8lfe34327db6b9bec8@mail.gmail.com>
Date: Thu, 27 Sep 2007 08:14:31 +0200
From: "Torsten Kaiser" <just.for.lkml@...glemail.com>
To: "Tejun Heo" <htejun@...il.com>
Cc: "Jeff Garzik" <jeff@...zik.org>, linux-kernel@...r.kernel.org,
akpm@...ux-foundation.org
Subject: Re: sata_sil24 broken since 2.6.23-rc4-mm1
On 9/27/07, Tejun Heo <htejun@...il.com> wrote:
> Tejun Heo wrote:
> > Torsten Kaiser wrote:
> >> Comparing the driver/ata directory from rc3-mm1 and rc4-mm1 the
> >> following change looked the most suspicions to me:
> >> http://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=blobdiff;f=drivers/ata/sata_sil24.c;h=3dcb223117be9739ee04d70b6bfc776a4b839a3f;hp=e0cd31aa8002350add53ba6ff07493e503275244;hb=020bc1bd8d369a77bd9379cd9763ac0057651753;hpb=8d4bdf8087e682df98bdb856f6ad451bf6d597e7
> >>
> >> That after rc4-mm1 the sata_sil24.c did not change anymore also
> >> matches the occurrence of the error.
> >>
> >> To confirm my theorie I exchanged the sata_sil24.c from rc8-mm1 with
> >> the version from rc3-mm1.
> >> I was able to boot the resulting kernel successfully 5 times, without
> >> the error happening again.
> >
> > Thanks a lot for chasing down the problem. The changed code is address
> > initialization path and it's weird that it causes intermittent failures,
> > not a consistent one.
> >
> > Anyways, does the attached patch fix the problem?
I'm starting to *really* hate that bug.
My analysis was wrong, as I booted to modified 2.6.23-rc8-mm1 this
morning, that failed too. (Same error messages as -rc7-mm1 from the
first mail in this thread.)
So it's not that change that causes the breakage.
And I'm not really finding a good pattern to what boots fail and what work.
It seems to only fail, if I completely power off the system for
several hours. (Using the physical switch at the backside of the
powersupply, not the normal soft-off)
One of the five boots I tried yesterday, I also powered the system
completely off that way, but only leaving it off ~10..20 seconds
seemed not to trigger the bug.
But I still think that is not a hardware failure, as the -rc3-mm1
kernel never showed that error, even when I used it several times
after the first -rc4-mm1 failures.
> If not, can you add printk of iomap[SIL24_PORT_BAR], offset, initialized
> cmd_addr and scr_addr in the loop and see whether anything is different
> between when the driver works and fails.
Should I do this anyway?
I compared the dmesg form good and bad boots with -rc7-mm1 but could
not see any difference, so do you think that these additional
diagnostics could show a difference?
Or could you suggest any other debugging options I should try?
Torsten
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists