Message-ID: <46FFE17C.9020202@cosmosbay.com>
Date:	Sun, 30 Sep 2007 19:48:44 +0200
From:	Eric Dumazet <dada1@...mosbay.com>
To:	Denys <nuclearcat@...learcat.com>
CC:	linux-kernel@...r.kernel.org
Subject: Re: 2.6.21 -> 2.6.22 & 2.6.23-rc8 performance regression

Denys a écrit :
> I've moved recently one of my proxies(squid and some compressing application) 
> from 2.6.21 to 2.6.22, and notice huge performance drop. I think this is 
> important, cause it can cause serious regression on some other workloads like 
> busy web-servers and etc.
> 
> After some analysis of different options i can bring more exact numbers:
> 
> 2.6.21 able to process 500-550 requests/second and 15-20 Mbit/s of traffic, 
> and working great without any slowdown or instability.
> 
> 2.6.22 able to process only 250-300 requests and 8-10 Mbit/s of traffic, ssh 
> and console is "freezing" (there is delay even for typing characters).
> 
> Both proxies is on identical hardware(Sun Fire X4100), configuration(small 
> system, LFS-like, on USB flash), different only kernel.
> 
> I tried to disable/enable various options and optimisations - it doesn't 
> change anything, till i reach SLUB/SLAB option.
> 
> I've loaded proxy configuration to gentoo PC with 2.6.22 (then upgraded it to 
> 2.6.23-rc8), and having same effect.
> Additionally, when load reaching maximum i can notice whole system slowdown, 
> for example ssh and scp takes much more time to run, even i do nice -n -5 for 
> them.
> 
> But even choosing 2.6.23-rc8+SLAB i noticed same "freezing" of ssh (and sure 
> it slowdown other kind of network performance), but much less comparing with 
> SLUB. On top i am seeing ksoftirqd taking almost 100% (sometimes ksoftirqd/0, 
> sometimes ksoftirqd/1).
> 
> I tried also different tricks with scheduler (/proc/sys/kernel/sched*), but 
> it's also didn't help.
> 
> When it freezes it looks like:
>   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
>     7 root      15  -5     0    0    0 R   64  0.0   2:47.48 ksoftirqd/1
>  5819 root      20   0  134m 130m  596 R   57  3.3   4:36.78 globax
>  5911 squid     20   0 1138m 1.1g 2124 R   26 28.9   2:24.87 squid
>    10 root      15  -5     0    0    0 S    1  0.0   0:01.86 events/1
>  6130 root      20   0  3960 2416 1592 S    0  0.1   0:08.02 oprofiled
> 
> 
> Oprofile results:
> 
> 
> Thats oprofile with 2.6.23-rc8 - SLUB
> 
> 73918    21.5521  check_bytes
> 38361    11.1848  acpi_pm_read
> 14077     4.1044  init_object
> 13632     3.9747  ip_send_reply
> 8486      2.4742  __slab_alloc
> 7199      2.0990  nf_iterate
> 6718      1.9588  page_address
> 6716      1.9582  tcp_v4_rcv
> 6425      1.8733  __slab_free
> 5604      1.6339  on_freelist
> 
> 
> Thats oprofile with 2.6.23-rc8 - SLAB
> 
> CPU: AMD64 processors, speed 2592.64 MHz (estimated)
> Counted CPU_CLK_UNHALTED events (Cycles outside of halt state) with a unit 
> mask of 0x00 (No unit mask) count 100000
> samples  %        symbol name
> 138991   14.0627  acpi_pm_read
> 52401     5.3018  tcp_v4_rcv
> 48466     4.9037  nf_iterate
> 38043     3.8491  __slab_alloc
> 34155     3.4557  ip_send_reply
> 20963     2.1210  ip_rcv
> 19475     1.9704  csum_partial
> 19084     1.9309  kfree
> 17434     1.7639  ip_output
> 17278     1.7481  netif_receive_skb
> 15248     1.5428  nf_hook_slow
> 
> My .config is at http://www.nuclearcat.com/.config (there is SPARSEMEM 
> enabled, it doesn't make any noticeable difference)
> 
> Please CC me on reply, i am not in list.
> 

Could you try with SLUB but disabling CONFIG_SLUB_DEBUG ?


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists