Linux version 2.6.22-gentoo-r5 (root@machina) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #4 SMP Wed Sep 12 19:07:11 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data) BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. Entering add_active_range(0, 0, 128736) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 128736 HighMem 128736 -> 128736 early_node_map[1] active PFN ranges 0: 0 -> 128736 On node 0 totalpages: 128736 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 973 pages used for memmap Normal zone: 123667 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F6700, 0014 (r0 PTLTD ) ACPI: RSDT 1F6E6557, 0030 (r1 PTLTD Montara 6040000 LTP 0) ACPI: FACP 1F6EAED2, 0074 (r1 INTEL MONTARAG 6040000 PTL 50) ACPI: DSDT 1F6E6A68, 446A (r1 INTEL MONTARAG 6040000 MSFT 100000E) ACPI: FACS 1F6FBFC0, 0040 ACPI: BOOT 1F6EAFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 1F6E6587, 04D9 (r1 INTEL GV3Ref 1001 MSFT 100000E) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) Built 1 zonelists. Total pages: 127731 Kernel command line: root=/dev/hda3 vga=0x318 i8042.nomux=1 console=tty1 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (013fd000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0558000 soft=c0538000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1599.891 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 502360k/514944k available (3172k kernel code, 11944k reserved, 828k data, 272k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) .init : 0xc04ef000 - 0xc0533000 ( 272 kB) .data : 0xc0419202 - 0xc04e8384 ( 828 kB) .text : 0xc0100000 - 0xc0419202 (3172 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3201.27 BogoMIPS (lpj=16006380) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd6c4, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:04: ioport range 0x600-0x60f has been reserved pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved Time: tsc clocksource has been installed. PCI: Bus 3, cardbus bridge: 0000:02:09.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 30000000-33ffffff MEM window: 38000000-3bffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: e0200000-e02fffff PREFETCH window: 30000000-35ffffff PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2425k freed Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1191186020.860:1): initialized squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Sep 12 2007 18:16:13) installed Lock_Nolock (built Sep 12 2007 18:16:27) installed io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:00:02.0 intel_rng: FWH not detected vesafb: framebuffer at 0xe8000000, mapped to 0xe0080000, using 6144k, total 8000k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLP2] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AT, ATA DISK drive hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive hdc: selected mode 0x42 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice inport.c: Didn't find InPort mouse at 0x23c logibm.c: Didn't find Logitech busmouse at 0x23c input: AT Translated Set 2 keyboard as /class/input/input3 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode Freeing unused kernel memory: 272k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input4 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0202000-e02027ff] Max Packet=[2048] IR/IT contexts=[8/8] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com JFS: nTxBlock = 3947, nTxLock = 31583 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. ieee1394: Host added: ID:BUS[0-00:1023] GUID[03e40a009c002042] ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855GM Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection Real Time Clock Driver v1.12ac wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman mmc0: W83L51xD id 7112 at 0x820 irq 6 FIFO PnP parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] NET: Registered protocol family 23 nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) eth0: Radio is disabled by RF switch. b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 eth1: Broadcom 4400 10/100BaseT Ethernet 00:0a:e4:21:a0:f0 Yenta: CardBus bridge found at 0000:02:09.0 [17c0:3003] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:09.0, mfunc 0x01001002, devctl 0x64 IrDA: Registered device irda0 nsc-ircc, Found dongle: Sharp RY5HD01 udev: renamed network interface eth0 to eth2 Yenta: ISA IRQ mask 0x0010, PCI irq 10 Socket status: 30000007 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 59549 usecs intel8x0: clocking to 48000 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names Adding 977248k swap on /dev/hda2. Priority:-1 extents:1 across:977248k fsam7400: SW RF kill switch for Fujitsu Siemens Amilo M 7400, v0.5.0 fsam7400: Copyright(c) 2004 zwobbl ;) WARNING: at arch/i386/kernel/smp.c:559 native_smp_call_function_mask() [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] ======================= ieee80211_crypt: registered algorithm 'WEP' [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized i915 1.6.0 20060119 on minor 0 [drm] Initialized i915 1.6.0 20060119 on minor 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth2: no IPv6 routers present atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 ' to make it known.