| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1192097441-24962-8-git-send-email-bryan.wu@analog.com>
Date: Thu, 11 Oct 2007 18:10:39 +0800
From: Bryan Wu <bryan.wu@...log.com>
To: dbrownell@...rs.sourceforge.net,
spi-devel-general@...ts.sourceforge.net,
linux-kernel@...r.kernel.org, akpm@...ux-foundation.org
Cc: Sonic Zhang <sonic.zhang@...log.com>,
Bryan Wu <bryan.wu@...log.com>
Subject: [PATCH 7/9] Blackfin SPI driver: Move GPIO config to setup and cleanup
From: Sonic Zhang <sonic.zhang@...log.com>
Signed-off-by: Sonic Zhang <sonic.zhang@...log.com>
Signed-off-by: Bryan Wu <bryan.wu@...log.com>
---
drivers/spi/spi_bfin5xx.c | 52 +++++++++++++++++++++++---------------------
1 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index ecfb7c5..c1516cb 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -136,7 +136,6 @@ struct chip_data {
u16 flag;
u8 chip_select_num;
- u8 chip_select_requested;
u8 n_bytes;
u8 width; /* 0 or 1 */
u8 enable_dma;
@@ -216,19 +215,7 @@ static int restore_state(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
int ret = 0;
- u16 ssel[3][MAX_SPI_SSEL] = {
- {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
- P_SPI0_SSEL4, P_SPI0_SSEL5,
- P_SPI0_SSEL6, P_SPI0_SSEL7},
-
- {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
- P_SPI1_SSEL4, P_SPI1_SSEL5,
- P_SPI1_SSEL6, P_SPI1_SSEL7},
-
- {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
- P_SPI2_SSEL4, P_SPI2_SSEL5,
- P_SPI2_SSEL6, P_SPI2_SSEL7},
- };
+
/* Clear status and disable clock */
write_STAT(BIT_STAT_CLR);
bfin_spi_disable(drv_data);
@@ -239,17 +226,6 @@ static int restore_state(struct driver_data *drv_data)
write_BAUD(chip->baud);
cs_active(chip);
- if (!chip->chip_select_requested) {
- int i = chip->chip_select_num;
-
- dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
- if ((i > 0) && (i <= MAX_SPI_SSEL))
- ret = peripheral_request(
- ssel[drv_data->master->bus_num][i-1], DRV_NAME);
-
- chip->chip_select_requested = 1;
- }
-
if (ret)
dev_dbg(&drv_data->pdev->dev,
": request chip select number %d failed\n",
@@ -981,6 +957,22 @@ static int transfer(struct spi_device *spi, struct spi_message *msg)
return 0;
}
+#define MAX_SPI_SSEL 7
+
+static u16 ssel[3][MAX_SPI_SSEL] = {
+ {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+ P_SPI0_SSEL4, P_SPI0_SSEL5,
+ P_SPI0_SSEL6, P_SPI0_SSEL7},
+
+ {P_SPI1_SSEL1, P_SPI1_SSEL2, P_SPI1_SSEL3,
+ P_SPI1_SSEL4, P_SPI1_SSEL5,
+ P_SPI1_SSEL6, P_SPI1_SSEL7},
+
+ {P_SPI2_SSEL1, P_SPI2_SSEL2, P_SPI2_SSEL3,
+ P_SPI2_SSEL4, P_SPI2_SSEL5,
+ P_SPI2_SSEL6, P_SPI2_SSEL7},
+};
+
/* first setup for new devices */
static int setup(struct spi_device *spi)
{
@@ -1109,6 +1101,12 @@ static int setup(struct spi_device *spi)
spi_set_ctldata(spi, chip);
+ dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_request(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1], DRV_NAME);
+
return 0;
}
@@ -1120,6 +1118,10 @@ static void cleanup(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_free(ssel[spi->master->bus_num][chip->chip_select_num-1]);
+
kfree(chip);
}
--
1.5.3.4
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists