| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200710131922.49094.rjw@sisk.pl>
Date: Sat, 13 Oct 2007 19:22:48 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Joseph Fannin <jfannin@...il.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org,
Domen Puncer <domen.puncer@...argo.com>
Subject: Re: 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without
On Saturday, 13 October 2007 17:50, Joseph Fannin wrote:
> On Thu, Oct 11, 2007 at 09:31:26PM -0700, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
>
>
> Domen Puncer's change to support "MPC5200 low power mode" (in
> powerpc-git, which is in Linus's tree now) adds new code calling
> mpc52xx_pm_prepare and _finish with suspend_state_t as an argument,
> while Rafael Wysocki's pm-rework-struct-platform_suspend_ops.patch
> converts those to take no arguments. So the build fails:
Ouch.
I think that the appended patch is needed. Unfortunately, I can't test it here.
Greetings,
Rafael
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
arch/powerpc/platforms/52xx/lite5200_pm.c | 35 +++++++++++++++++++-----------
include/asm-powerpc/mpc52xx.h | 4 +--
2 files changed, 25 insertions(+), 14 deletions(-)
Index: linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
===================================================================
--- linux-2.6.23-mm1.orig/include/asm-powerpc/mpc52xx.h
+++ linux-2.6.23-mm1/include/asm-powerpc/mpc52xx.h
@@ -267,9 +267,9 @@ extern int mpc52xx_set_wakeup_gpio(u8 pi
extern int __init lite5200_pm_init(void);
/* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
#endif
#endif /* CONFIG_PM */
Index: linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
===================================================================
--- linux-2.6.23-mm1.orig/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ linux-2.6.23-mm1/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -1,5 +1,5 @@
#include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/mpc52xx.h>
@@ -18,6 +18,8 @@ static void __iomem *sram;
static const int sram_size = 0x4000; /* 16 kBytes */
static void __iomem *mbar;
+static suspend_state_t lite5200_pm_target_state;
+
static int lite5200_pm_valid(suspend_state_t state)
{
switch (state) {
@@ -29,13 +31,22 @@ static int lite5200_pm_valid(suspend_sta
}
}
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+ if (lite5200_pm_valid(state)) {
+ lite5200_pm_target_state = state;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
{
/* deep sleep? let mpc52xx code handle that */
- if (state == PM_SUSPEND_STANDBY)
- return mpc52xx_pm_prepare(state);
+ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+ return mpc52xx_pm_prepare();
- if (state != PM_SUSPEND_MEM)
+ if (lite5200_pm_target_state != PM_SUSPEND_MEM)
return -EINVAL;
/* map registers */
@@ -190,24 +201,24 @@ static int lite5200_pm_enter(suspend_sta
return 0;
}
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
{
/* deep sleep? let mpc52xx code handle that */
- if (state == PM_SUSPEND_STANDBY) {
- return mpc52xx_pm_finish(state);
+ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) {
+ mpc52xx_pm_finish();
}
- return 0;
}
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
.valid = lite5200_pm_valid,
+ .set_target = lite5200_pm_set_target,
.prepare = lite5200_pm_prepare,
.enter = lite5200_pm_enter,
.finish = lite5200_pm_finish,
};
-int __init lite5200_pm_init(void)
+int __init lite5200_suspend_init(void)
{
- pm_set_ops(&lite5200_pm_ops);
+ suspend_set_ops(&lite5200_pm_ops);
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists