| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071015160914.GA18550@linux.intel.com> Date: Mon, 15 Oct 2007 09:09:14 -0700 From: Mark Gross <mgross@...ux.intel.com> To: "Rafael J. Wysocki" <rjw@...k.pl> Cc: Andrew Morton <akpm@...ux-foundation.org>, linux-kernel@...r.kernel.org, ACPI Devel Maling List <linux-acpi@...r.kernel.org>, Len Brown <lenb@...nel.org>, Arjan van de Ven <arjan@...radead.org> Subject: Re: 2.6.23-mm1 On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > to stabilise things for the 2.6.23 merge. > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > a bit better. > > I get many traces similar to the one below from it (w/ hotfixes): > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain. As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet. I'll change the PM_QOS params patch to use blocking notifiers and test on a 64bit boot and see what happens. I've been needing to setup my x86_64 dev box for a while now anyway. thanks, --mgross > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > Full dmesg attached. > > Greetings, > Rafael > Linux version 2.6.23-mm1 (rafael@...ercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007 > Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable) > BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved) > BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS) > BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) > BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 491472) 1 entries of 256 used > end_pfn_map = 1048576 > DMI 2.4 present. > ACPI: RSDP 000F7D30, 0024 (r2 HP ) > ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1) > ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1) > ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E) > ACPI: FACS 77FF7E80, 0040 > ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1) > ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1) > ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1) > ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E) > ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 491472) 1 entries of 256 used > No mptable found. > sizeof(struct page) = 56 > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 491472 > On node 0 totalpages: 491375 > Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000 > DMA zone: 56 pages used for memmap > DMA zone: 1481 pages reserved > DMA zone: 2462 pages, LIFO batch:0 > DMA32 zone: 6663 pages used for memmap > DMA32 zone: 480713 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ATI board detected. Disabling timer routing over 8254. > ACPI: PM-Timer IO Port: 0x8008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 > swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 > swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PERCPU: Allocating 46704 bytes of per cpu data > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175 > Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC calibrated against PM_TIMER > Marking TSC unstable due to TSCs unsynchronized > time.c: Detected 1995.006 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Checking aperture... > CPU 0: aperture @ 108000000 size 32 MB > Aperture too small (32 MB) > No AGP bridge found > Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init) > Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280) > Security Framework initialized > Capability LSM initialized > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > SMP alternatives: switching to UP code > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > Disabling APIC timer > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Brought up 2 CPUs > CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > net_namespace: 120 bytes > Time: 21:13:03 Date: 10/12/07 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ > Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:....... > Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: No mmconfig possible on device 00:18 > ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 > ACPI: PCI Root Bridge [C074] (0000:00) > PCI: Transparent bridge - 0000:00:14.4 > ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] > ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. > ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) > ACPI: Power Resource [C223] (off) > ACPI: Power Resource [C1FE] (off) > ACPI: Power Resource [C217] (on) > ACPI: Power Resource [C34B] (off) > ACPI: Power Resource [C34C] (off) > ACPI: Power Resource [C34D] (off) > ACPI: Power Resource [C34E] (off) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Cannot allocate resource region 0 of device 0000:00:14.2 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > DMAR:No DMAR devices found > ACPI: RTC can wake from S4 > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0xe0000-0xfffff could not be reserved > system 00:00: iomem range 0x100000-0x77ffffff could not be reserved > system 00:0a: ioport range 0x40b-0x40b has been reserved > system 00:0a: ioport range 0x4d0-0x4d1 has been reserved > system 00:0a: ioport range 0x4d6-0x4d6 has been reserved > system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved > system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved > system 00:0b: ioport range 0x8000-0x802f has been reserved > system 00:0b: ioport range 0x8100-0x811f has been reserved > system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:0c: iomem range 0xcf000-0xcffff has been reserved > system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved > system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved > PCI: Bridge: 0000:00:01.0 > IO window: 6000-6fff > MEM window: d4300000-d43fffff > PREFETCH window: c0000000-c7ffffff > PCI: Bridge: 0000:00:04.0 > IO window: 4000-5fff > MEM window: d0000000-d3ffffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:05.0 > IO window: 2000-3fff > MEM window: cc000000-cfffffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: c8000000-c80fffff > PREFETCH window: disabled. > PCI: Bus 3, cardbus bridge: 0000:02:04.0 > IO window: 00001000-000010ff > IO window: 00001400-000014ff > PREFETCH window: 8c000000-8fffffff > MEM window: 90000000-93ffffff > PCI: Bridge: 0000:00:14.4 > IO window: disabled. > MEM window: d4000000-d42fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 > NET: Registered protocol family 2 > Time: acpi_pm clocksource has been installed. > Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. > Could not switch to high resolution mode on CPU 1 > lapic is not functional. > Could not switch to high resolution mode on CPU 0 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 131072 (order: 9, 3145728 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 5282k freed > audit: initializing netlink socket (disabled) > audit(1192223582.968:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: MSI quirk detected. MSI deactivated. > Boot video device is 0000:01:05.0 > PCI: Setting latency timer of device 0000:00:04.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:04.0:pcie00] > Allocate Port Service[0000:00:04.0:pcie01] > Allocate Port Service[0000:00:04.0:pcie03] > PCI: Setting latency timer of device 0000:00:05.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:05.0:pcie00] > Allocate Port Service[0000:00:05.0:pcie01] > Allocate Port Service[0000:00:05.0:pcie03] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > Allocate Port Service[0000:00:06.0:pcie01] > Allocate Port Service[0000:00:06.0:pcie03] > AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support > vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k > vesafb: mode is 1024x768x24, linelength=3072, pages=6 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > Real Time Clock Driver v1.12ac > Non-volatile memory driver v1.2 > Linux agpgart interface v0.102 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize > sata_sil 0000:00:12.0: version 2.3 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > scsi0 : sata_sil > scsi1 : sata_sil > ata1: SATA max UDMA/100 mmio m512@...4409000 tf 0xd4409080 irq 16 > ata2: SATA max UDMA/100 mmio m512@...4409000 tf 0xd44090c0 irq 16 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100 > ata1.00: 156301488 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/100 > ata2: SATA link down (SStatus 0 SControl 300) > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > sd 0:0:0:0: [sda] Attached SCSI disk > PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: PC Speaker as /class/input/input0 > input: AT Translated Set 2 keyboard as /class/input/input1 > NET: Registered protocol family 1 > swsusp: Resume From Partition /dev/sda1 > PM: Checking swsusp image. > PM: Resume from disk failed. > registered taskstats version 1 > Magic number: 11:322:247 > Freeing unused kernel memory: 252k freed > Write protecting the kernel read-only data: 1124k > sd 0:0:0:0: Attached scsi generic sg0 type 0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1 > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > ATIIXP: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio > ATIIXP: simplex device: DMA disabled > ide1: ATIIXP Bus-Master DMA disabled (BIOS) > Probing IDE interface ide0... > hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > BIOS EDD facility v0.16 2004-Jun-25, 6 devices found > swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 > swsusp: Basic memory bitmaps created > swsusp: Basic memory bitmaps freed > Attempting manual resume > swsusp: Resume From Partition 8:1 > PM: Checking swsusp image. > PM: Resume from disk failed. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > ieee80211_crypt: registered algorithm 'NULL' > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@...ux.intel.com> > Floppy drive(s): fd0 is 1.44M > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > tg3.c:v3.82 (October 5, 2007) > eth0 renamed to eth1 > sysfs: duplicate filename 'eth1' can not be created > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one() > > Call Trace: > [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9 > [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c > [<ffffffff80382e0a>] device_rename+0x17a/0x1db > [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234 > [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0 > [<ffffffff803d7585>] dev_ioctl+0x520/0x633 > [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 > [<ffffffff8030cb16>] __up_read+0x8f/0x97 > [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > net eth1: device_rename: sysfs_create_symlink failed (-17) > ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 > eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] > eth0: dma_rwctrl[763f0000] dma_mask[32-bit] > piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device > sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0) > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > mmc0: SDHCI at 0xd4019000 irq 20 PIO > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:13.2: EHCI Host Controller > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices' > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8 > ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024 > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN > ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: default language 0x0409 > usb usb1: uevent > usb usb1: usb_probe_device > usb usb1: configuration #1 chosen from 1 choice > usb usb1: adding 1-0:1.0 (config #1, interface 0) > usb 1-0:1.0: uevent > usb 1-0:1.0: uevent > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: no power switching (usb 1.0) > hub 1-0:1.0: individual port over-current protection > hub 1-0:1.0: Single TT > hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) > hub 1-0:1.0: power on to power good time: 20ms > hub 1-0:1.0: local power source is good > hub 1-0:1.0: trying to enable port power on non-switchable hub > hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd: block sizes: ed 80 td 96 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb1: new device found, idVendor=0000, idProduct=0000 > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd > usb usb1: SerialNumber: 0000:00:13.2 > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > Yenta: Enabling burst memory read transactions > ohci_hcd 0000:00:13.0: OHCI Host Controller > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:13.0: created debug files > ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 > Yenta: Using INTVAL to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > usb usb2: default language 0x0409 > usb usb2: uevent > usb usb2: usb_probe_device > usb usb2: configuration #1 chosen from 1 choice > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > usb usb2: adding 2-0:1.0 (config #1, interface 0) > usb 2-0:1.0: uevent > usb 2-0:1.0: uevent > hub 2-0:1.0: usb_probe_interface > hub 2-0:1.0: usb_probe_interface - got id > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 4 ports detected > hub 2-0:1.0: standalone hub > hub 2-0:1.0: no power switching (usb 1.0) > hub 2-0:1.0: global over-current protection > hub 2-0:1.0: power on to power good time: 4ms > hub 2-0:1.0: local power source is good > hub 2-0:1.0: no over-current condition exists > hub 2-0:1.0: trying to enable port power on non-switchable hub > rtc_cmos: probe of 00:07 failed with error -16 > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > Yenta: ISA IRQ mask 0x0eb8, PCI irq 20 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > Socket status: 30000006 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb2: new device found, idVendor=0000, idProduct=0000 > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd > usb usb2: SerialNumber: 0000:00:13.0 > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:13.1: created debug files > ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #0005 > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > usb usb3: default language 0x0409 > usb usb3: uevent > usb usb3: usb_probe_device > usb usb3: configuration #1 chosen from 1 choice > usb usb3: adding 3-0:1.0 (config #1, interface 0) > usb 3-0:1.0: uevent > usb 3-0:1.0: uevent > hub 3-0:1.0: usb_probe_interface > hub 3-0:1.0: usb_probe_interface - got id > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > hub 3-0:1.0: standalone hub > hub 3-0:1.0: no power switching (usb 1.0) > hub 3-0:1.0: global over-current protection > hub 3-0:1.0: power on to power good time: 4ms > hub 3-0:1.0: local power source is good > hub 3-0:1.0: no over-current condition exists > hub 3-0:1.0: trying to enable port power on non-switchable hub > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c] > usb 2-2: new full speed USB device using ohci_hcd and address 2 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb3: new device found, idVendor=0000, idProduct=0000 > usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: OHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd > usb usb3: SerialNumber: 0000:00:13.1 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > floppy0: no floppy controllers found > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044 > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > Bluetooth: HCI USB driver ver 2.9 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > usbcore: registered new interface driver hci_usb > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > usb 3-1: new full speed USB device using ohci_hcd and address 2 > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > Bluetooth: RFCOMM socket layer initialized > usb 3-1: ep0 maxpacket = 8 > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 3 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 > usbcore: registered new interface driver hiddev > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input2 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > usbcore: registered new interface driver usbhid > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 > serio: Synaptics pass-through port at isa0060/serio4/input0 > input: SynPS/2 Synaptics TouchPad as /class/input/input4 > device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@...hat.com > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > loop: module loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda8, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda6, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Floppy drive(s): fd0 is 1.44M > floppy0: no floppy controllers found > Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > ACPI: AC Adapter [C1BD] (on-line) > ACPI: Battery Slot [C1BF] (battery present) > ACPI: Battery Slot [C1BE] (battery absent) > input: Power Button (FF) as /class/input/input5 > ACPI: Power Button (FF) [PWRF] > input: Sleep Button (CM) as /class/input/input6 > ACPI: Sleep Button (CM) [C25A] > input: Lid Switch as /class/input/input7 > ACPI: Lid Switch [C25B] > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Fan [C34F] (off) > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Fan [C350] (off) > ACPI: Transitioning device [C351] to D3 > ACPI: Transitioning device [C351] to D3 > ACPI: Fan [C351] (off) > ACPI: Transitioning device [C352] to D3 > ACPI: Transitioning device [C352] to D3 > ACPI: Fan [C352] (off) > ACPI: Processor [C000] (supports 8 throttling states) > ACPI: Processor [C001] (supports 8 throttling states) > ACPI: Thermal Zone [TZ1] (62 C) > ACPI: Thermal Zone [TZ2] (52 C) > ACPI: Thermal Zone [TZ3] (32 C) > powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) > powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 > powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 > powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e > powernow-k8: ph2 null fid transition 0xc > mtrr: no more MTRRs available > APIC error on CPU1: 00(40) > APIC error on CPU0: 00(40) > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6 > [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b > [<ffffffff80270bab>] unlock_page+0x2d/0x31 > [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4 > [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8024e56b>] up_read+0x9/0xb > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > hda-intel: Invalid position buffer, using LPIB read method instead. > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > ACPI: PCI interrupt for device 0000:30:00.0 disabled > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > NET: Registered protocol family 17 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > bcm43xx: Radio initialized > bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 > bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 > bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 > ACPI: PCI interrupt for device 0000:30:00.0 disabled > Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > PM: Entering mem sleep > Suspending device vcsa10 > Suspending device vcs10 > Suspending device vcsa4 > Suspending device vcs4 > Suspending device vcsa2 > Suspending device vcs2 > Suspending device vcsa6 > Suspending device vcs6 > Suspending device vcsa5 > Suspending device vcs5 > Suspending device vcsa3 > Suspending device vcs3 > Suspending device vcsa7 > Suspending device vcs7 > Suspending device audio > Suspending device dsp > Suspending device mixer > Suspending device event7 > Suspending device input7 > Suspending device event6 > Suspending device input6 > Suspending device event5 > Suspending device input5 > Suspending device seq > Suspending device C1BE > Suspending device C1BF > Suspending device C1BD > Suspending device device-mapper > Suspending device serio5 > Suspending device event4 > Suspending device mouse1 > Suspending device input4 > Suspending device hiddev0 > Suspending device event3 > Suspending device input3 > Suspending device event2 > Suspending device mouse0 > Suspending device input2 > Suspending device usbdev3.3 > Suspending device usbdev3.3_ep82 > Suspending device 3-3:1.1 > Suspending device usbdev3.3_ep81 > Suspending device 3-3:1.0 > Suspending device usbdev3.3_ep00 > Suspending device 3-3 > usb 3-3: usb suspend > Suspending device usbdev3.2 > Suspending device usbdev3.2_ep02 > Suspending device usbdev3.2_ep81 > Suspending device 3-1:1.0 > Suspending device usbdev3.2_ep00 > Suspending device 3-1 > usb 3-1: usb suspend > Suspending device hci0 > Suspending device usbdev2.2_ep03 > Suspending device usbdev2.2_ep83 > Suspending device bluetooth > Suspending device usbdev2.2 > Suspending device 2-2:1.3 > Suspending device usbdev2.2_ep04 > Suspending device usbdev2.2_ep84 > Suspending device 2-2:1.2 > Suspending device 2-2:1.1 > Suspending device usbdev2.2_ep02 > Suspending device usbdev2.2_ep82 > Suspending device usbdev2.2_ep81 > Suspending device 2-2:1.0 > Suspending device usbdev2.2_ep00 > Suspending device 2-2 > usb 2-2: usb suspend > Suspending device usbdev3.1 > Suspending device usbdev3.1_ep81 > Suspending device 00023f9929613f0c > Suspending device 00023f9929613f0c > Suspending device 3-0:1.0 > Suspending device usbdev3.1_ep00 > Suspending device usb3 > hub 3-0:1.0: hub_suspend > usb usb3: bus suspend > ohci_hcd 0000:00:13.1: suspend root hub > Suspending device pcmcia_socket0 > Suspending device usbdev2.1 > Suspending device usbdev2.1_ep81 > Suspending device 2-0:1.0 > Suspending device usbdev2.1_ep00 > Suspending device usb2 > hub 2-0:1.0: hub_suspend > usb usb2: bus suspend > ohci_hcd 0000:00:13.0: suspend root hub > Suspending device hwmon0 > Suspending device usbdev1.1 > Suspending device usbdev1.1_ep81 > Suspending device 1-0:1.0 > Suspending device usbdev1.1_ep00 > Suspending device usb1 > Suspending device fw-host0 > Suspending device fw-host0 > Suspending device mmc0 > Suspending device i2c-0 > Suspending device eth0 > Suspending device controlC0 > Suspending device hwC0D0 > Suspending device hwC0D1 > Suspending device pcmC0D0c > Suspending device pcmC0D0p > Suspending device timer > Suspending device vcsa1 > Suspending device vcs1 > Suspending device 0.0 > Suspending device ide0 > Suspending device network_throughput > Suspending device network_latency > Suspending device cpu_dma_latency > Suspending device event1 > Suspending device event0 > Suspending device input1 > Suspending device input0 > Suspending device psaux > Suspending device mice > Suspending device serio4 > Suspending device serio3 > Suspending device serio2 > Suspending device serio1 > Suspending device serio0 > Suspending device i8042 > Suspending device 0:0:0:0 > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > Suspending device target0:0:0 > Suspending device host1 > Suspending device host0 > Suspending device ttyS3 > Suspending device ttyS2 > Suspending device ttyS1 > Suspending device ttyS0 > Suspending device serial8250 > Suspending device nvram > Suspending device hpet > Suspending device rtc > Suspending device ttysf > Suspending device ttyse > Suspending device ttysd > Suspending device ttysc > Suspending device ttysb > Suspending device ttysa > Suspending device ttys9 > Suspending device ttys8 > Suspending device ttys7 > Suspending device ttys6 > Suspending device ttys5 > Suspending device ttys4 > Suspending device ttys3 > Suspending device ttys2 > Suspending device ttys1 > Suspending device ttys0 > Suspending device ttyrf > Suspending device ttyre > Suspending device ttyrd > Suspending device ttyrc > Suspending device ttyrb > Suspending device ttyra > Suspending device ttyr9 > Suspending device ttyr8 > Suspending device ttyr7 > Suspending device ttyr6 > Suspending device ttyr5 > Suspending device ttyr4 > Suspending device ttyr3 > Suspending device ttyr2 > Suspending device ttyr1 > Suspending device ttyr0 > Suspending device ttyqf > Suspending device ttyqe > Suspending device ttyqd > Suspending device ttyqc > Suspending device ttyqb > Suspending device ttyqa > Suspending device ttyq9 > Suspending device ttyq8 > Suspending device ttyq7 > Suspending device ttyq6 > Suspending device ttyq5 > Suspending device ttyq4 > Suspending device ttyq3 > Suspending device ttyq2 > Suspending device ttyq1 > Suspending device ttyq0 > Suspending device ttypf > Suspending device ttype > Suspending device ttypd > Suspending device ttypc > Suspending device ttypb > Suspending device ttypa > Suspending device ttyp9 > Suspending device ttyp8 > Suspending device ttyp7 > Suspending device ttyp6 > Suspending device ttyp5 > Suspending device ttyp4 > Suspending device ttyp3 > Suspending device ttyp2 > Suspending device ttyp1 > Suspending device ttyp0 > Suspending device ptysf > Suspending device ptyse > Suspending device ptysd > Suspending device ptysc > Suspending device ptysb > Suspending device ptysa > Suspending device ptys9 > Suspending device ptys8 > Suspending device ptys7 > Suspending device ptys6 > Suspending device ptys5 > Suspending device ptys4 > Suspending device ptys3 > Suspending device ptys2 > Suspending device ptys1 > Suspending device ptys0 > Suspending device ptyrf > Suspending device ptyre > Suspending device ptyrd > Suspending device ptyrc > Suspending device ptyrb > Suspending device ptyra > Suspending device ptyr9 > Suspending device ptyr8 > Suspending device ptyr7 > Suspending device ptyr6 > Suspending device ptyr5 > Suspending device ptyr4 > Suspending device ptyr3 > Suspending device ptyr2 > Suspending device ptyr1 > Suspending device ptyr0 > Suspending device ptyqf > Suspending device ptyqe > Suspending device ptyqd > Suspending device ptyqc > Suspending device ptyqb > Suspending device ptyqa > Suspending device ptyq9 > Suspending device ptyq8 > Suspending device ptyq7 > Suspending device ptyq6 > Suspending device ptyq5 > Suspending device ptyq4 > Suspending device ptyq3 > Suspending device ptyq2 > Suspending device ptyq1 > Suspending device ptyq0 > Suspending device ptypf > Suspending device ptype > Suspending device ptypd > Suspending device ptypc > Suspending device ptypb > Suspending device ptypa > Suspending device ptyp9 > Suspending device ptyp8 > Suspending device ptyp7 > Suspending device ptyp6 > Suspending device ptyp5 > Suspending device ptyp4 > Suspending device ptyp3 > Suspending device ptyp2 > Suspending device ptyp1 > Suspending device ptyp0 > Suspending device tty63 > Suspending device tty62 > Suspending device tty61 > Suspending device tty60 > Suspending device tty59 > Suspending device tty58 > Suspending device tty57 > Suspending device tty56 > Suspending device tty55 > Suspending device tty54 > Suspending device tty53 > Suspending device tty52 > Suspending device tty51 > Suspending device tty50 > Suspending device tty49 > Suspending device tty48 > Suspending device tty47 > Suspending device tty46 > Suspending device tty45 > Suspending device tty44 > Suspending device tty43 > Suspending device tty42 > Suspending device tty41 > Suspending device tty40 > Suspending device tty39 > Suspending device tty38 > Suspending device tty37 > Suspending device tty36 > Suspending device tty35 > Suspending device tty34 > Suspending device tty33 > Suspending device tty32 > Suspending device tty31 > Suspending device tty30 > Suspending device tty29 > Suspending device tty28 > Suspending device tty27 > Suspending device tty26 > Suspending device tty25 > Suspending device tty24 > Suspending device tty23 > Suspending device tty22 > Suspending device tty21 > Suspending device tty20 > Suspending device tty19 > Suspending device tty18 > Suspending device tty17 > Suspending device tty16 > Suspending device tty15 > Suspending device tty14 > Suspending device tty13 > Suspending device tty12 > Suspending device tty11 > Suspending device tty10 > Suspending device tty9 > Suspending device tty8 > Suspending device tty7 > Suspending device tty6 > Suspending device tty5 > Suspending device tty4 > Suspending device tty3 > Suspending device tty2 > Suspending device tty1 > Suspending device vcsa > Suspending device vcs > Suspending device tty0 > Suspending device ptmx > Suspending device console > Suspending device tty > Suspending device vtcon1 > Suspending device fb0 > Suspending device vesafb.0 > Suspending device fbcon > Suspending device 0000:00:06.0:pcie03 > Suspending device 0000:00:06.0:pcie01 > Suspending device 0000:00:06.0:pcie00 > Suspending device 0000:00:05.0:pcie03 > Suspending device 0000:00:05.0:pcie01 > Suspending device 0000:00:05.0:pcie00 > Suspending device 0000:00:04.0:pcie03 > Suspending device 0000:00:04.0:pcie01 > Suspending device 0000:00:04.0:pcie00 > Suspending device snapshot > Suspending device pcspkr > Suspending device mcelog > Suspending device lo > Suspending device kmsg > Suspending device urandom > Suspending device random > Suspending device full > Suspending device zero > Suspending device port > Suspending device null > Suspending device kmem > Suspending device mem > Suspending device 00:0c > ACPI handle has no context! > Suspending device 00:0b > Suspending device 00:0a > Suspending device 00:09 > Suspending device 00:08 > Suspending device 00:07 > Suspending device 00:06 > Suspending device 00:05 > Suspending device 00:04 > Suspending device 00:03 > Suspending device 00:02 > Suspending device 00:01 > Suspending device 00:00 > Suspending device pnp0 > Suspending device 0000:02 > Suspending device 0000:03 > Suspending device 0000:02:04.3 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.3 disabled > ACPI handle has no context! > Suspending device 0000:02:04.2 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.2 disabled > ACPI handle has no context! > Suspending device 0000:02:04.1 > ACPI handle has no context! > Suspending device 0000:02:04.0 > Suspending device 0000:02:01.0 > Suspending device 0000:30 > Suspending device 0000:30:00.0 > Suspending device 0000:20 > Suspending device 0000:10 > Suspending device 0000:01 > Suspending device 0000:01:05.0 > Suspending device 0000:00:18.3 > Suspending device 0000:00:18.2 > Suspending device 0000:00:18.1 > Suspending device 0000:00:18.0 > Suspending device 0000:00:14.4 > Suspending device 0000:00:14.3 > Suspending device 0000:00:14.2 > ACPI: PCI interrupt for device 0000:00:14.2 disabled > Suspending device 0000:00:14.1 > Suspending device 0000:00:14.0 > Suspending device 0000:00:13.2 > ACPI: PCI interrupt for device 0000:00:13.2 disabled > ehci_hcd 0000:00:13.2: --> PCI D3 > Suspending device 0000:00:13.1 > ACPI: PCI interrupt for device 0000:00:13.1 disabled > ohci_hcd 0000:00:13.1: --> PCI D0/legacy > Suspending device 0000:00:13.0 > ACPI: PCI interrupt for device 0000:00:13.0 disabled > ohci_hcd 0000:00:13.0: --> PCI D0/legacy > Suspending device 0000:00:12.0 > ACPI: PCI interrupt for device 0000:00:12.0 disabled > Suspending device 0000:00:06.0 > Suspending device 0000:00:05.0 > Suspending device 0000:00:04.0 > Suspending device 0000:00:01.0 > Suspending device 0000:00:00.0 > Suspending device 0000:00 > Suspending device pci0000:00 > Suspending device LNXTHERM:03 > Suspending device LNXTHERM:02 > Suspending device LNXTHERM:01 > Suspending device PNP0C0B:03 > Suspending device PNP0C0B:02 > ACPI: Transitioning device [C351] to D0 > ACPI: Transitioning device [C351] to D0 > Suspending device PNP0C0B:01 > ACPI: Transitioning device [C350] to D0 > ACPI: Transitioning device [C350] to D0 > Suspending device PNP0C0B:00 > ACPI: Transitioning device [C34F] to D0 > ACPI: Transitioning device [C34F] to D0 > Suspending device LNXPOWER:06 > Suspending device LNXPOWER:05 > Suspending device LNXPOWER:04 > Suspending device LNXPOWER:03 > Suspending device LNXTHERM:00 > Suspending device PNP0C02:02 > Suspending device PNP0C14:00 > Suspending device PNP0C0D:00 > Suspending device PNP0C0E:00 > Suspending device ACPI0003:00 > Suspending device PNP0C0A:01 > Suspending device PNP0C0A:00 > Suspending device HPQ0006:00 > Suspending device PNP0C02:01 > Suspending device device:49 > Suspending device device:48 > Suspending device device:47 > Suspending device device:46 > Suspending device device:45 > Suspending device device:44 > Suspending device device:43 > Suspending device device:42 > Suspending device device:41 > Suspending device device:40 > Suspending device device:3f > Suspending device device:3e > Suspending device device:3d > Suspending device device:3c > Suspending device device:3b > Suspending device device:3a > Suspending device device:39 > Suspending device device:38 > Suspending device device:37 > Suspending device device:36 > Suspending device device:35 > Suspending device device:34 > Suspending device device:33 > Suspending device PNP0C0F:07 > Suspending device PNP0C0F:06 > Suspending device PNP0C0F:05 > Suspending device PNP0C0F:04 > Suspending device PNP0C0F:03 > Suspending device PNP0C0F:02 > Suspending device PNP0C0F:01 > Suspending device PNP0C0F:00 > Suspending device device:32 > Suspending device device:31 > Suspending device device:30 > Suspending device device:2f > Suspending device device:2e > Suspending device device:2d > Suspending device device:2c > Suspending device device:2b > Suspending device device:2a > Suspending device device:29 > Suspending device device:28 > Suspending device device:27 > Suspending device device:26 > Suspending device device:25 > Suspending device device:24 > Suspending device device:23 > Suspending device device:22 > Suspending device device:21 > Suspending device device:20 > Suspending device device:1f > Suspending device device:1e > Suspending device device:1d > Suspending device device:1c > Suspending device device:1b > Suspending device device:1a > Suspending device device:19 > Suspending device device:18 > Suspending device device:17 > Suspending device device:16 > Suspending device device:15 > Suspending device device:14 > Suspending device device:13 > Suspending device device:12 > Suspending device device:11 > Suspending device device:10 > Suspending device PNP0C02:00 > Suspending device PNP0000:00 > Suspending device LNXPOWER:02 > Suspending device SYN0118:00 > Suspending device PNP0303:00 > Suspending device PNP0B00:00 > Suspending device PNP0800:00 > Suspending device PNP0200:00 > Suspending device PNP0100:00 > Suspending device PNP0C04:00 > Suspending device IFX0102:00 > Suspending device LNXPOWER:01 > Suspending device PNP0401:00 > Suspending device PNP0A06:00 > Suspending device PNP0C09:00 > Suspending device device:0f > Suspending device device:0e > Suspending device LNXPOWER:00 > Suspending device device:0d > Suspending device device:0c > Suspending device device:0b > Suspending device device:0a > Suspending device device:09 > Suspending device device:08 > Suspending device device:07 > Suspending device device:06 > Suspending device device:05 > Suspending device device:04 > Suspending device device:03 > Suspending device device:02 > Suspending device LNXVIDEO:00 > Suspending device device:01 > Suspending device PNP0A03:00 > Suspending device PNP0C01:00 > Suspending device device:00 > Suspending device ACPI0007:01 > Suspending device ACPI0007:00 > Suspending device LNXPWRBN:00 > Suspending device LNXSYSTM:00 > Suspending device id > Suspending device vtcon0 > Suspending device platform > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > Cannot set affinity for irq 0 > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3] > Back to C! > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single() > > Call Trace: > [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f > [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0 > [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc > [<ffffffff80214c61>] sc_freq_event+0x71/0x75 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157 > [<ffffffff80383128>] __sysdev_resume+0x34/0x4a > [<ffffffff8038366e>] sysdev_resume+0x1f/0x61 > [<ffffffff80388050>] device_power_up+0x9/0x10 > [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7 > [<ffffffff8025bd3f>] enter_state+0x163/0x1e5 > [<ffffffff8025be65>] state_store+0xa4/0xc2 > [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33 > [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c > [<ffffffff80294d07>] vfs_write+0xc7/0x150 > [<ffffffff80295288>] sys_write+0x47/0x70 > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Machine check events logged > CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > CPU1 is up > Clockevents: could not switch to one-shot mode: lapic is not functional. > Could not switch to high resolution mode on CPU 1 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C351] to D3 > ACPI: Transitioning device [C351] to D3 > PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161) > PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000) > PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141) > PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00) > PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121) > PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800) > PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1) > PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010) > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > ohci_hcd 0000:00:13.0: PCI legacy resume > PCI: Enabling device 0000:00:13.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b) > PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000) > PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010) > PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007) > ohci_hcd 0000:00:13.1: PCI legacy resume > PCI: Enabling device 0000:00:13.1 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b) > PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000) > PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007) > ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.2 to 64 > PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b) > ehci_hcd 0000:00:13.2: lost power, restarting > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041) > PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010) > PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005) > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) > PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002) > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000) > PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000) > PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10) > PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003) > PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010) > PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) > PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a) > PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc) > PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400) > PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc) > PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000) > PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000) > PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000) > PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000) > PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000) > PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302) > PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000) > PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810) > PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007) > PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a) > PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000) > PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000) > PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a) > PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000) > PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006) > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a) > PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000) > PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006) > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > sd 0:0:0:0: [sda] Starting disk > ata2: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > usb usb1: usb resume > ehci_hcd 0000:00:13.2: resume root hub after power loss > hub 1-0:1.0: trying to enable port power on non-switchable hub > usb usb2: usb resume > ohci_hcd 0000:00:13.0: lost power > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.0: restart complete > usb usb2: root hub lost power or was reset > hub 2-0:1.0: trying to enable port power on non-switchable hub > hub 2-0:1.0: logical disconnect on port 2 > usb usb3: usb resume > ohci_hcd 0000:00:13.1: lost power > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #000b > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.1: restart complete > usb usb3: root hub lost power or was reset > hub 3-0:1.0: trying to enable port power on non-switchable hub > hub 3-0:1.0: logical disconnect on port 1 > hub 3-0:1.0: logical disconnect on port 3 > PM: Finishing wakeup. > Restarting tasks ... done. > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > usb 2-2: USB disconnect, address 2 > usb 2-2: unregistering device > usb 2-2: usb_disable_device nuking all URBs > usb 2-2: unregistering interface 2-2:1.0 > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: unregistering interface 2-2:1.1 > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: unregistering interface 2-2:1.2 > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: unregistering interface 2-2:1.3 > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > usb 2-2: uevent > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: new full speed USB device using ohci_hcd and address 3 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > usb 3-1: USB disconnect, address 2 > usb 3-1: unregistering device > usb 3-1: usb_disable_device nuking all URBs > usb 3-1: unregistering interface 3-1:1.0 > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > usb 3-1: uevent > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: new full speed USB device using ohci_hcd and address 4 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: ep0 maxpacket = 8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > usb 3-3: USB disconnect, address 3 > usb 3-3: unregistering device > usb 3-3: usb_disable_device nuking all URBs > usb 3-3: unregistering interface 3-3:1.0 > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: unregistering interface 3-3:1.1 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usb 3-3: uevent > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 5 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input8 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input9 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > bcm43xx: Radio initialized > bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 > bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 > bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 > ACPI: PCI interrupt for device 0000:30:00.0 disabled > swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 > swsusp: Basic memory bitmaps created > Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done. > Shrinking memory... .-.\.done (15072 pages freed) > Freed 60288 kbytes in 0.22 seconds (274.03 MB/s) > Suspending device vcsa8 > Suspending device vcs8 > Suspending device vcsa10 > Suspending device vcs10 > Suspending device usbdev3.5 > Suspending device usbdev3.5_ep82 > Suspending device hiddev0 > Suspending device event3 > Suspending device input9 > Suspending device 3-3:1.1 > Suspending device usbdev3.5_ep81 > Suspending device event2 > Suspending device mouse0 > Suspending device input8 > Suspending device 3-3:1.0 > Suspending device usbdev3.5_ep00 > Suspending device 3-3 > Suspending device usbdev3.4 > Suspending device usbdev3.4_ep02 > Suspending device usbdev3.4_ep81 > Suspending device 3-1:1.0 > Suspending device usbdev3.4_ep00 > Suspending device 3-1 > Suspending device usbdev2.3 > Suspending device 2-2:1.3 > Suspending device usbdev2.3_ep04 > Suspending device usbdev2.3_ep84 > Suspending device 2-2:1.2 > Suspending device usbdev2.3_ep03 > Suspending device usbdev2.3_ep83 > Suspending device 2-2:1.1 > Suspending device usbdev2.3_ep02 > Suspending device usbdev2.3_ep82 > Suspending device usbdev2.3_ep81 > Suspending device hci0 > Suspending device 2-2:1.0 > Suspending device usbdev2.3_ep00 > Suspending device 2-2 > Suspending device vcsa4 > Suspending device vcs4 > Suspending device vcsa2 > Suspending device vcs2 > Suspending device vcsa6 > Suspending device vcs6 > Suspending device vcsa5 > Suspending device vcs5 > Suspending device vcsa3 > Suspending device vcs3 > Suspending device vcsa7 > Suspending device vcs7 > Suspending device audio > Suspending device dsp > Suspending device mixer > Suspending device event7 > Suspending device input7 > Suspending device event6 > Suspending device input6 > Suspending device event5 > Suspending device input5 > Suspending device seq > Suspending device C1BE > Suspending device C1BF > Suspending device C1BD > Suspending device device-mapper > Suspending device serio5 > Suspending device event4 > Suspending device mouse1 > Suspending device input4 > Suspending device bluetooth > Suspending device usbdev3.1 > Suspending device usbdev3.1_ep81 > Suspending device 00023f9929613f0c > Suspending device 00023f9929613f0c > Suspending device 3-0:1.0 > Suspending device usbdev3.1_ep00 > Suspending device usb3 > hub 3-0:1.0: hub_suspend > usb usb3: bus suspend > ohci_hcd 0000:00:13.1: suspend root hub > Suspending device pcmcia_socket0 > Suspending device usbdev2.1 > Suspending device usbdev2.1_ep81 > Suspending device 2-0:1.0 > Suspending device usbdev2.1_ep00 > Suspending device usb2 > hub 2-0:1.0: hub_suspend > usb usb2: bus suspend > ohci_hcd 0000:00:13.0: suspend root hub > Suspending device hwmon0 > Suspending device usbdev1.1 > Suspending device usbdev1.1_ep81 > Suspending device 1-0:1.0 > Suspending device usbdev1.1_ep00 > Suspending device usb1 > Suspending device fw-host0 > Suspending device fw-host0 > Suspending device mmc0 > Suspending device i2c-0 > Suspending device eth0 > Suspending device controlC0 > Suspending device hwC0D0 > Suspending device hwC0D1 > Suspending device pcmC0D0c > Suspending device pcmC0D0p > Suspending device timer > Suspending device vcsa1 > Suspending device vcs1 > Suspending device 0.0 > Suspending device ide0 > Suspending device network_throughput > Suspending device network_latency > Suspending device cpu_dma_latency > Suspending device event1 > Suspending device event0 > Suspending device input1 > Suspending device input0 > Suspending device psaux > Suspending device mice > Suspending device serio4 > Suspending device serio3 > Suspending device serio2 > Suspending device serio1 > Suspending device serio0 > Suspending device i8042 > Suspending device 0:0:0:0 > sd 0:0:0:0: [sda] Synchronizing SCSI cache > Suspending device target0:0:0 > Suspending device host1 > Suspending device host0 > Suspending device ttyS3 > Suspending device ttyS2 > Suspending device ttyS1 > Suspending device ttyS0 > Suspending device serial8250 > Suspending device nvram > Suspending device hpet > Suspending device rtc > Suspending device ttysf > Suspending device ttyse > Suspending device ttysd > Suspending device ttysc > Suspending device ttysb > Suspending device ttysa > Suspending device ttys9 > Suspending device ttys8 > Suspending device ttys7 > Suspending device ttys6 > Suspending device ttys5 > Suspending device ttys4 > Suspending device ttys3 > Suspending device ttys2 > Suspending device ttys1 > Suspending device ttys0 > Suspending device ttyrf > Suspending device ttyre > Suspending device ttyrd > Suspending device ttyrc > Suspending device ttyrb > Suspending device ttyra > Suspending device ttyr9 > Suspending device ttyr8 > Suspending device ttyr7 > Suspending device ttyr6 > Suspending device ttyr5 > Suspending device ttyr4 > Suspending device ttyr3 > Suspending device ttyr2 > Suspending device ttyr1 > Suspending device ttyr0 > Suspending device ttyqf > Suspending device ttyqe > Suspending device ttyqd > Suspending device ttyqc > Suspending device ttyqb > Suspending device ttyqa > Suspending device ttyq9 > Suspending device ttyq8 > Suspending device ttyq7 > Suspending device ttyq6 > Suspending device ttyq5 > Suspending device ttyq4 > Suspending device ttyq3 > Suspending device ttyq2 > Suspending device ttyq1 > Suspending device ttyq0 > Suspending device ttypf > Suspending device ttype > Suspending device ttypd > Suspending device ttypc > Suspending device ttypb > Suspending device ttypa > Suspending device ttyp9 > Suspending device ttyp8 > Suspending device ttyp7 > Suspending device ttyp6 > Suspending device ttyp5 > Suspending device ttyp4 > Suspending device ttyp3 > Suspending device ttyp2 > Suspending device ttyp1 > Suspending device ttyp0 > Suspending device ptysf > Suspending device ptyse > Suspending device ptysd > Suspending device ptysc > Suspending device ptysb > Suspending device ptysa > Suspending device ptys9 > Suspending device ptys8 > Suspending device ptys7 > Suspending device ptys6 > Suspending device ptys5 > Suspending device ptys4 > Suspending device ptys3 > Suspending device ptys2 > Suspending device ptys1 > Suspending device ptys0 > Suspending device ptyrf > Suspending device ptyre > Suspending device ptyrd > Suspending device ptyrc > Suspending device ptyrb > Suspending device ptyra > Suspending device ptyr9 > Suspending device ptyr8 > Suspending device ptyr7 > Suspending device ptyr6 > Suspending device ptyr5 > Suspending device ptyr4 > Suspending device ptyr3 > Suspending device ptyr2 > Suspending device ptyr1 > Suspending device ptyr0 > Suspending device ptyqf > Suspending device ptyqe > Suspending device ptyqd > Suspending device ptyqc > Suspending device ptyqb > Suspending device ptyqa > Suspending device ptyq9 > Suspending device ptyq8 > Suspending device ptyq7 > Suspending device ptyq6 > Suspending device ptyq5 > Suspending device ptyq4 > Suspending device ptyq3 > Suspending device ptyq2 > Suspending device ptyq1 > Suspending device ptyq0 > Suspending device ptypf > Suspending device ptype > Suspending device ptypd > Suspending device ptypc > Suspending device ptypb > Suspending device ptypa > Suspending device ptyp9 > Suspending device ptyp8 > Suspending device ptyp7 > Suspending device ptyp6 > Suspending device ptyp5 > Suspending device ptyp4 > Suspending device ptyp3 > Suspending device ptyp2 > Suspending device ptyp1 > Suspending device ptyp0 > Suspending device tty63 > Suspending device tty62 > Suspending device tty61 > Suspending device tty60 > Suspending device tty59 > Suspending device tty58 > Suspending device tty57 > Suspending device tty56 > Suspending device tty55 > Suspending device tty54 > Suspending device tty53 > Suspending device tty52 > Suspending device tty51 > Suspending device tty50 > Suspending device tty49 > Suspending device tty48 > Suspending device tty47 > Suspending device tty46 > Suspending device tty45 > Suspending device tty44 > Suspending device tty43 > Suspending device tty42 > Suspending device tty41 > Suspending device tty40 > Suspending device tty39 > Suspending device tty38 > Suspending device tty37 > Suspending device tty36 > Suspending device tty35 > Suspending device tty34 > Suspending device tty33 > Suspending device tty32 > Suspending device tty31 > Suspending device tty30 > Suspending device tty29 > Suspending device tty28 > Suspending device tty27 > Suspending device tty26 > Suspending device tty25 > Suspending device tty24 > Suspending device tty23 > Suspending device tty22 > Suspending device tty21 > Suspending device tty20 > Suspending device tty19 > Suspending device tty18 > Suspending device tty17 > Suspending device tty16 > Suspending device tty15 > Suspending device tty14 > Suspending device tty13 > Suspending device tty12 > Suspending device tty11 > Suspending device tty10 > Suspending device tty9 > Suspending device tty8 > Suspending device tty7 > Suspending device tty6 > Suspending device tty5 > Suspending device tty4 > Suspending device tty3 > Suspending device tty2 > Suspending device tty1 > Suspending device vcsa > Suspending device vcs > Suspending device tty0 > Suspending device ptmx > Suspending device console > Suspending device tty > Suspending device vtcon1 > Suspending device fb0 > Suspending device vesafb.0 > Suspending device fbcon > Suspending device 0000:00:06.0:pcie03 > Suspending device 0000:00:06.0:pcie01 > Suspending device 0000:00:06.0:pcie00 > Suspending device 0000:00:05.0:pcie03 > Suspending device 0000:00:05.0:pcie01 > Suspending device 0000:00:05.0:pcie00 > Suspending device 0000:00:04.0:pcie03 > Suspending device 0000:00:04.0:pcie01 > Suspending device 0000:00:04.0:pcie00 > Suspending device snapshot > Suspending device pcspkr > Suspending device mcelog > Suspending device lo > Suspending device kmsg > Suspending device urandom > Suspending device random > Suspending device full > Suspending device zero > Suspending device port > Suspending device null > Suspending device kmem > Suspending device mem > Suspending device 00:0c > ACPI handle has no context! > Suspending device 00:0b > Suspending device 00:0a > Suspending device 00:09 > Suspending device 00:08 > Suspending device 00:07 > Suspending device 00:06 > Suspending device 00:05 > Suspending device 00:04 > Suspending device 00:03 > Suspending device 00:02 > Suspending device 00:01 > Suspending device 00:00 > Suspending device pnp0 > Suspending device 0000:02 > Suspending device 0000:03 > Suspending device 0000:02:04.3 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.3 disabled > ACPI handle has no context! > Suspending device 0000:02:04.2 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.2 disabled > ACPI handle has no context! > Suspending device 0000:02:04.1 > ACPI handle has no context! > Suspending device 0000:02:04.0 > Suspending device 0000:02:01.0 > Suspending device 0000:30 > Suspending device 0000:30:00.0 > Suspending device 0000:20 > Suspending device 0000:10 > Suspending device 0000:01 > Suspending device 0000:01:05.0 > Suspending device 0000:00:18.3 > Suspending device 0000:00:18.2 > Suspending device 0000:00:18.1 > Suspending device 0000:00:18.0 > Suspending device 0000:00:14.4 > Suspending device 0000:00:14.3 > Suspending device 0000:00:14.2 > ACPI: PCI interrupt for device 0000:00:14.2 disabled > Suspending device 0000:00:14.1 > Suspending device 0000:00:14.0 > Suspending device 0000:00:13.2 > ACPI: PCI interrupt for device 0000:00:13.2 disabled > ehci_hcd 0000:00:13.2: --> PCI D3 > Suspending device 0000:00:13.1 > ACPI: PCI interrupt for device 0000:00:13.1 disabled > ohci_hcd 0000:00:13.1: --> PCI D0/legacy > Suspending device 0000:00:13.0 > ACPI: PCI interrupt for device 0000:00:13.0 disabled > ohci_hcd 0000:00:13.0: --> PCI D0/legacy > Suspending device 0000:00:12.0 > ACPI: PCI interrupt for device 0000:00:12.0 disabled > Suspending device 0000:00:06.0 > Suspending device 0000:00:05.0 > Suspending device 0000:00:04.0 > Suspending device 0000:00:01.0 > Suspending device 0000:00:00.0 > Suspending device 0000:00 > Suspending device pci0000:00 > Suspending device LNXTHERM:03 > Suspending device LNXTHERM:02 > Suspending device LNXTHERM:01 > Suspending device PNP0C0B:03 > Suspending device PNP0C0B:02 > ACPI: Transitioning device [C351] to D0 > ACPI: Transitioning device [C351] to D0 > Suspending device PNP0C0B:01 > ACPI: Transitioning device [C350] to D0 > ACPI: Transitioning device [C350] to D0 > Suspending device PNP0C0B:00 > ACPI: Transitioning device [C34F] to D0 > ACPI: Transitioning device [C34F] to D0 > Suspending device LNXPOWER:06 > Suspending device LNXPOWER:05 > Suspending device LNXPOWER:04 > Suspending device LNXPOWER:03 > Suspending device LNXTHERM:00 > Suspending device PNP0C02:02 > Suspending device PNP0C14:00 > Suspending device PNP0C0D:00 > Suspending device PNP0C0E:00 > Suspending device ACPI0003:00 > Suspending device PNP0C0A:01 > Suspending device PNP0C0A:00 > Suspending device HPQ0006:00 > Suspending device PNP0C02:01 > Suspending device device:49 > Suspending device device:48 > Suspending device device:47 > Suspending device device:46 > Suspending device device:45 > Suspending device device:44 > Suspending device device:43 > Suspending device device:42 > Suspending device device:41 > Suspending device device:40 > Suspending device device:3f > Suspending device device:3e > Suspending device device:3d > Suspending device device:3c > Suspending device device:3b > Suspending device device:3a > Suspending device device:39 > Suspending device device:38 > Suspending device device:37 > Suspending device device:36 > Suspending device device:35 > Suspending device device:34 > Suspending device device:33 > Suspending device PNP0C0F:07 > Suspending device PNP0C0F:06 > Suspending device PNP0C0F:05 > Suspending device PNP0C0F:04 > Suspending device PNP0C0F:03 > Suspending device PNP0C0F:02 > Suspending device PNP0C0F:01 > Suspending device PNP0C0F:00 > Suspending device device:32 > Suspending device device:31 > Suspending device device:30 > Suspending device device:2f > Suspending device device:2e > Suspending device device:2d > Suspending device device:2c > Suspending device device:2b > Suspending device device:2a > Suspending device device:29 > Suspending device device:28 > Suspending device device:27 > Suspending device device:26 > Suspending device device:25 > Suspending device device:24 > Suspending device device:23 > Suspending device device:22 > Suspending device device:21 > Suspending device device:20 > Suspending device device:1f > Suspending device device:1e > Suspending device device:1d > Suspending device device:1c > Suspending device device:1b > Suspending device device:1a > Suspending device device:19 > Suspending device device:18 > Suspending device device:17 > Suspending device device:16 > Suspending device device:15 > Suspending device device:14 > Suspending device device:13 > Suspending device device:12 > Suspending device device:11 > Suspending device device:10 > Suspending device PNP0C02:00 > Suspending device PNP0000:00 > Suspending device LNXPOWER:02 > Suspending device SYN0118:00 > Suspending device PNP0303:00 > Suspending device PNP0B00:00 > Suspending device PNP0800:00 > Suspending device PNP0200:00 > Suspending device PNP0100:00 > Suspending device PNP0C04:00 > Suspending device IFX0102:00 > Suspending device LNXPOWER:01 > Suspending device PNP0401:00 > Suspending device PNP0A06:00 > Suspending device PNP0C09:00 > Suspending device device:0f > Suspending device device:0e > Suspending device LNXPOWER:00 > Suspending device device:0d > Suspending device device:0c > Suspending device device:0b > Suspending device device:0a > Suspending device device:09 > Suspending device device:08 > Suspending device device:07 > Suspending device device:06 > Suspending device device:05 > Suspending device device:04 > Suspending device device:03 > Suspending device device:02 > Suspending device LNXVIDEO:00 > Suspending device device:01 > Suspending device PNP0A03:00 > Suspending device PNP0C01:00 > Suspending device device:00 > Suspending device ACPI0007:01 > Suspending device ACPI0007:00 > Suspending device LNXPWRBN:00 > Suspending device LNXSYSTM:00 > Suspending device id > Suspending device vtcon0 > Suspending device platform > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > swsusp: critical section: > swsusp: Need to copy 149622 pages > swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743 > evxfevnt-0079 [00] enable : System is already in ACPI mode > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Clockevents: could not switch to one-shot mode: lapic is not functional. > CPU0 attaching sched-domain: > Could not switch to high resolution mode on CPU 1 > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > CPU1 is up > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161) > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007) > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > ohci_hcd 0000:00:13.0: PCI legacy resume > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > ohci_hcd 0000:00:13.1: PCI legacy resume > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017) > ehci_hcd 0000:00:13.2: lost power, restarting > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) > PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002) > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200) > PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003) > PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a) > PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > sd 0:0:0:0: [sda] Starting disk > ata2: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > usb usb1: usb resume > ehci_hcd 0000:00:13.2: resume root hub after power loss > hub 1-0:1.0: trying to enable port power on non-switchable hub > usb usb2: usb resume > ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008 > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.0: restart complete > usb usb2: root hub lost power or was reset > hub 2-0:1.0: trying to enable port power on non-switchable hub > hub 2-0:1.0: logical disconnect on port 2 > usb usb3: usb resume > ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008 > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #0005 > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.1: restart complete > usb usb3: root hub lost power or was reset > hub 3-0:1.0: trying to enable port power on non-switchable hub > hub 3-0:1.0: logical disconnect on port 1 > hub 3-0:1.0: logical disconnect on port 3 > Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > done. > swsusp: Basic memory bitmaps freed > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > usb 2-2: USB disconnect, address 3 > usb 2-2: unregistering device > usb 2-2: usb_disable_device nuking all URBs > usb 2-2: unregistering interface 2-2:1.0 > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: unregistering interface 2-2:1.1 > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: unregistering interface 2-2:1.2 > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: unregistering interface 2-2:1.3 > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > usb 2-2: uevent > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: new full speed USB device using ohci_hcd and address 4 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > usb 3-1: USB disconnect, address 4 > usb 3-1: unregistering device > usb 3-1: usb_disable_device nuking all URBs > usb 3-1: unregistering interface 3-1:1.0 > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > usb 3-1: uevent > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: new full speed USB device using ohci_hcd and address 6 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: ep0 maxpacket = 8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > usb 3-3: USB disconnect, address 5 > usb 3-3: unregistering device > usb 3-3: usb_disable_device nuking all URBs > usb 3-3: unregistering interface 3-3:1.0 > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: unregistering interface 3-3:1.1 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usb 3-3: uevent > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 7 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input10 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input11 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2 > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists