| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1192524207.11166.1.camel@sevens.analog.com>
Date: Tue, 16 Oct 2007 16:43:27 +0800
From: Sonic Zhang <sonic.adi@...il.com>
To: Linux Kernel <linux-kernel@...r.kernel.org>,
Linux IDE <linux-ide@...r.kernel.org>,
Jeff Garzik <jeff@...zik.org>
Cc: bzolnier@...il.com
Subject: [PATCH] Update libata driver for bf548 atapi controller against
the 2.6.24 tree.
Changes:
1. Remove irq_ack() and port_disable() methods
2. Acocomodate for the libata-link patches
3. Change Kconfig ATAPI mode option into a module param.
4. Add supported WMDMA mode.
Signed-off-by: Sonic Zhang <sonic.zhang@...log.com>
---
drivers/ata/Kconfig | 7 ----
drivers/ata/pata_bf54x.c | 77 ++++++++++++++++++++++------------------------
2 files changed, 37 insertions(+), 47 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 33f5eb0..c0ea83d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -641,11 +641,4 @@ config PATA_BF54X
If unsure, say N.
-config PATA_BF54X_DMA
- bool "DMA mode"
- depends on PATA_BF54X
- default y
- help
- Enable DMA mode for Blackfin ATAPI controller.
-
endif # ATA
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 747549e..b5e3842 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1092,14 +1092,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
* Note: Original code is ata_std_softreset().
*/
-static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
+static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
u8 err;
- if (ata_port_offline(ap)) {
+ if (ata_link_offline(link)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
@@ -1122,9 +1123,11 @@ static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(ap, 0, &err);
+ classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(ap, 1, &err);
+ classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ devmask & (1 << 1), &err);
out:
return 0;
@@ -1167,7 +1170,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
- struct ata_port *ap = adev->ap;
+ struct ata_port *ap = adev->link->ap;
unsigned int words = buflen >> 1;
unsigned short *buf16 = (u16 *) buf;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1206,7 +1209,10 @@ static void bfin_irq_clear(struct ata_port *ap)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
pr_debug("in atapi irq clear\n");
- ATAPI_SET_INT_STATUS(base, 0x1FF);
+
+ ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
+ | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
+ | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
}
/**
@@ -1234,33 +1240,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
}
/**
- * bfin_irq_ack - Acknowledge a device interrupt.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_irq_ack().
- */
-
-static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
- unsigned char status;
-
- pr_debug("in atapi irq ack\n");
- status = ata_busy_wait(ap, bits, 1000);
- if (status & bits)
- if (ata_msg_err(ap))
- dev_err(ap->dev, "abnormal status 0x%X\n", status);
-
- /* get controller status; clear intr, err bits */
- ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
- | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
- | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
-
- return bfin_bmdma_status(ap);
-}
-
-/**
* bfin_bmdma_freeze - Freeze DMA controller port
* @ap: port to freeze
*
@@ -1308,8 +1287,9 @@ void bfin_bmdma_thaw(struct ata_port *ap)
* Note: Original code is ata_std_postreset().
*/
-static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes)
+static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
/* re-enable interrupts */
@@ -1395,7 +1375,6 @@ static struct scsi_host_template bfin_sht = {
};
static const struct ata_port_operations bfin_pata_ops = {
- .port_disable = ata_port_disable,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
@@ -1423,7 +1402,6 @@ static const struct ata_port_operations bfin_pata_ops = {
.irq_handler = ata_interrupt,
.irq_clear = bfin_irq_clear,
.irq_on = bfin_irq_on,
- .irq_ack = bfin_irq_ack,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
@@ -1437,11 +1415,7 @@ static struct ata_port_info bfin_port_info[] = {
| ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0,
-#ifdef CONFIG_PATA_BF54X_DMA
- .udma_mask = ATA_UDMA5,
-#else
.udma_mask = 0,
-#endif
.port_ops = &bfin_pata_ops,
},
};
@@ -1607,9 +1581,25 @@ static struct platform_driver bfin_atapi_driver = {
},
};
+#define ATAPI_MODE_SIZE 10
+static char bfin_atapi_mode[ATAPI_MODE_SIZE];
+
static int __init bfin_atapi_init(void)
{
pr_info("register bfin atapi driver\n");
+
+ switch(bfin_atapi_mode[0]) {
+ case 'p':
+ case 'P':
+ break;
+ case 'm':
+ case 'M':
+ bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
+ break;
+ default:
+ bfin_port_info[0].udma_mask = ATA_UDMA5;
+ };
+
return platform_driver_register(&bfin_atapi_driver);
}
@@ -1620,6 +1610,13 @@ static void __exit bfin_atapi_exit(void)
module_init(bfin_atapi_init);
module_exit(bfin_atapi_exit);
+/*
+ * ATAPI mode:
+ * pio/PIO
+ * udma/UDMA (default)
+ * mwdma/MWDMA
+ */
+module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@...log.com>");
MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
--
1.5.1.3
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists