[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <47168A5B.2020304@tmr.com>
Date: Wed, 17 Oct 2007 18:19:07 -0400
From: Bill Davidsen <davidsen@....com>
To: Michael Stiller <ms@...ale.net>
CC: linux-kernel@...r.kernel.org
Subject: Re: howto boost write(2) performance?
Michael Stiller wrote:
> Hi list,
>
> i'm developing an application (in C) which needs to write about
> 1Gbit/s (125Mb/s) to a disk array attached via U320 SCSI.
> It runs on Dual Core 2 Xeons @2Ghz utilizing kernel 2.6.22.7.
People regularly report speeds higher than that on the RAID list, and I
can get that order of magnitude speed using dd with 1MB buffers to a
software RAID-0 array or cheap SATA drives. Are you using a decent
controller? Many "RAID" controllers have bandwidth limitations, buffer
size issues, etc. I had some chea "SCSI" arrays which were just SCSI
controllers in from of a bunch of cheap, slow, non-SCSI drives.
>
> I buffer the data in (currently 4) 400Mb buffers and use write(2) in a
> dedicated thread to write them to the raw disk (no fs).
I would limit the write size to a MB and see if that helps, regardless
of the buffer size. A circular queue of smaller buffers, like ptbuf, may
perform better.
>
> The write(2) performance is not good enough, the writer threads take to
> much time, and i ask you for ideas, howto to boost the write
> performance.
>
> Maybe mmaping the disk would work?
I don't think it would help, I'd really try limiting the size of the
write() calls first, assuming your hardware is adequate.
--
Bill Davidsen <davidsen@....com>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists