| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071018193654.GB25591@cosmic.amd.com>
Date: Thu, 18 Oct 2007 13:36:54 -0600
From: "Jordan Crouse" <jordan.crouse@....com>
To: "Andres Salomon" <dilinger@...ued.net>
cc: linux-kernel@...r.kernel.org, info-linux@...de.amd.com,
"Thomas Gleixner" <tglx@...utronix.de>
Subject: Re: GEODE: update GPIO API to support setting multiple GPIOs at
once
On 18/10/07 15:27 -0400, Andres Salomon wrote:
> The existing Geode GPIO API only allows for updating one GPIO at once. There
> are instances where users want to update multiple GPIOs at once. With the
> current API, they are given two choices; either ignore the GPIO API:
>
> outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
> outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);
>
> Alternatively, call each GPIO update separately:
>
> geode_gpio_set(14, GPIO_OUTPUT_VAL);
> geode_gpio_set(15, GPIO_OUTPUT_VAL);
> geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
> geode_gpio_set(15, GPIO_OUTPUT_ENABLE);
>
> Neither are desirable. This patch changes the GPIO API to allow for setting
> of multiple GPIOs at once; rather than being passed an integer, we pass
> a bitmask and provide a translation function. The above code would now
> look like this:
>
> geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
> geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);
>
> Since there are no upstream users of the GPIO API yet (afaik), best to
> change this now. This also adds a bit of sanity checking; it is no
> longer possible to use a GPIO above 28.
>
>
> Note the semantics of geode_gpio_isset() have changed:
> geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
> will only return true iff both GPIOs are set.
>
> Signed-off-by: Andres Salomon <dilinger@...ian.org>
Acked-by: Jordan Crouse <jordan.crouse@....com>
> diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
> index f12d8c5..9c7f7d3 100644
> --- a/arch/x86/kernel/geode_32.c
> +++ b/arch/x86/kernel/geode_32.c
> @@ -1,6 +1,7 @@
> /*
> * AMD Geode southbridge support code
> * Copyright (C) 2006, Advanced Micro Devices, Inc.
> + * Copyright (C) 2007, Andres Salomon <dilinger@...ian.org>
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of version 2 of the GNU General Public License
> @@ -51,45 +52,62 @@ EXPORT_SYMBOL_GPL(geode_get_dev_base);
>
> /* === GPIO API === */
>
> -void geode_gpio_set(unsigned int gpio, unsigned int reg)
> +void geode_gpio_set(u32 gpio, unsigned int reg)
> {
> u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
>
> if (!base)
> return;
>
> - if (gpio < 16)
> - outl(1 << gpio, base + reg);
> - else
> - outl(1 << (gpio - 16), base + 0x80 + reg);
> + /* low bank register */
> + if (gpio & 0xFFFF)
> + outl(gpio & 0xFFFF, base + reg);
> + /* high bank register */
> + gpio >>= 16;
> + if (gpio)
> + outl(gpio, base + 0x80 + reg);
> }
> EXPORT_SYMBOL_GPL(geode_gpio_set);
>
> -void geode_gpio_clear(unsigned int gpio, unsigned int reg)
> +void geode_gpio_clear(u32 gpio, unsigned int reg)
> {
> u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
>
> if (!base)
> return;
>
> - if (gpio < 16)
> - outl(1 << (gpio + 16), base + reg);
> - else
> - outl(1 << gpio, base + 0x80 + reg);
> + /* low bank register */
> + if (gpio & 0xFFFF)
> + outl((gpio & 0xFFFF) << 16, base + reg);
> + /* high bank register */
> + gpio &= (0xFFFF << 16);
> + if (gpio)
> + outl(gpio, base + 0x80 + reg);
> }
> EXPORT_SYMBOL_GPL(geode_gpio_clear);
>
> -int geode_gpio_isset(unsigned int gpio, unsigned int reg)
> +int geode_gpio_isset(u32 gpio, unsigned int reg)
> {
> u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
> + u32 val;
>
> if (!base)
> return 0;
>
> - if (gpio < 16)
> - return (inl(base + reg) & (1 << gpio)) ? 1 : 0;
> - else
> - return (inl(base + 0x80 + reg) & (1 << (gpio - 16))) ? 1 : 0;
> + /* low bank register */
> + if (gpio & 0xFFFF) {
> + val = inl(base + reg) & (gpio & 0xFFFF);
> + if ((gpio & 0xFFFF) == val)
> + return 1;
> + }
> + /* high bank register */
> + gpio >>= 16;
> + if (gpio) {
> + val = inl(base + 0x80 + reg) & gpio;
> + if (gpio == val)
> + return 1;
> + }
> + return 0;
> }
> EXPORT_SYMBOL_GPL(geode_gpio_isset);
>
> diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
> index d948988..593d3ec 100644
> --- a/include/asm-x86/geode.h
> +++ b/include/asm-x86/geode.h
> @@ -119,9 +119,15 @@ extern int geode_get_dev_base(unsigned int dev);
> #define GPIO_MAP_Z 0xE8
> #define GPIO_MAP_W 0xEC
>
> -extern void geode_gpio_set(unsigned int, unsigned int);
> -extern void geode_gpio_clear(unsigned int, unsigned int);
> -extern int geode_gpio_isset(unsigned int, unsigned int);
> +static inline u32 geode_gpio(unsigned int nr)
> +{
> + BUG_ON(nr > 28);
> + return 1 << nr;
> +}
> +
> +extern void geode_gpio_set(u32, unsigned int);
> +extern void geode_gpio_clear(u32, unsigned int);
> +extern int geode_gpio_isset(u32, unsigned int);
> extern void geode_gpio_setup_event(unsigned int, int, int);
> extern void geode_gpio_set_irq(unsigned int, unsigned int);
>
>
>
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists