| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4716D415.6010904@rtr.ca>
Date: Wed, 17 Oct 2007 23:33:41 -0400
From: Mark Lord <lkml@....ca>
To: kristen.c.accardi@...el.com
Cc: Linux Kernel <linux-kernel@...r.kernel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Theodore Ts'o <tytso@....edu>, greg@...ah.com,
pcihpd-discuss@...ts.sourceforge.net
Subject: [PATCH 2/3] pciehp: hotplug: split out hardware init from pcie_init()
(repost to conform with akpm's subject line conventions)
One of three patches to fix PCIe Hotplug so that it works with ExpressCard slots
on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1
Split out the hotplug hardware initialization code from pcie_init()
into pcie_init_enable_events(), without changing any functionality.
Signed-off-by: Mark Lord <mlord@...ox.com>
---
--- a/drivers/pci/hotplug/pciehp_hpc.c 2007-10-17 19:06:38.000000000 -0400
+++ b/drivers/pci/hotplug/pciehp_hpc.c 2007-10-17 19:29:42.000000000 -0400
@@ -1067,99 +1067,22 @@
}
#endif
-int pcie_init(struct controller * ctrl, struct pcie_device *dev)
+int pcie_init_hardware(struct controller *ctrl, struct pcie_device *dev)
{
int rc;
u16 temp_word;
- u16 cap_reg;
u16 intr_enable = 0;
u32 slot_cap;
- int cap_base;
- u16 slot_status, slot_ctrl;
+ u16 slot_status;
struct pci_dev *pdev;
pdev = dev->port;
- ctrl->pci_dev = pdev; /* save pci_dev in context */
-
- dbg("%s: hotplug controller vendor id 0x%x device id 0x%x\n",
- __FUNCTION__, pdev->vendor, pdev->device);
-
- if ((cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP)) == 0) {
- dbg("%s: Can't find PCI_CAP_ID_EXP (0x10)\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
-
- ctrl->cap_base = cap_base;
-
- dbg("%s: pcie_cap_base %x\n", __FUNCTION__, cap_base);
-
- rc = pciehp_readw(ctrl, CAPREG, &cap_reg);
- if (rc) {
- err("%s: Cannot read CAPREG register\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
- dbg("%s: CAPREG offset %x cap_reg %x\n",
- __FUNCTION__, ctrl->cap_base + CAPREG, cap_reg);
-
- if (((cap_reg & SLOT_IMPL) == 0) ||
- (((cap_reg & DEV_PORT_TYPE) != 0x0040)
- && ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
- dbg("%s : This is not a root port or the port is not "
- "connected to a slot\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
err("%s: Cannot read SLOTCAP register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOTCAP offset %x slot_cap %x\n",
- __FUNCTION__, ctrl->cap_base + SLOTCAP, slot_cap);
-
- if (!(slot_cap & HP_CAP)) {
- dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
- /* For debugging purpose */
- rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
- if (rc) {
- err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
- dbg("%s: SLOTSTATUS offset %x slot_status %x\n",
- __FUNCTION__, ctrl->cap_base + SLOTSTATUS, slot_status);
-
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- goto abort_free_ctlr;
- }
- dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n",
- __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
-
- for (rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
- if (pci_resource_len(pdev, rc) > 0)
- dbg("pci resource[%d] start=0x%llx(len=0x%llx)\n", rc,
- (unsigned long long)pci_resource_start(pdev, rc),
- (unsigned long long)pci_resource_len(pdev, rc));
-
- info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
- pdev->vendor, pdev->device,
- pdev->subsystem_vendor, pdev->subsystem_device);
-
- mutex_init(&ctrl->crit_sect);
- mutex_init(&ctrl->ctrl_lock);
- spin_lock_init(&ctrl->lock);
-
- /* setup wait queue */
- init_waitqueue_head(&ctrl->queue);
-
- /* return PCI Controller Info */
- ctrl->slot_device_offset = 0;
- ctrl->num_slots = 1;
- ctrl->first_slot = slot_cap >> 19;
- ctrl->ctrlcap = slot_cap & 0x0000007f;
/* Mask Hot-plug Interrupt Enable */
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
@@ -1280,8 +1203,6 @@
goto abort_disable_intr;
}
- ctrl->hpc_ops = &pciehp_hpc_ops;
-
return 0;
/* We end up here for the many possible ways to fail this API. */
@@ -1303,3 +1224,105 @@
abort_free_ctlr:
return -1;
}
+
+int pcie_init(struct controller *ctrl, struct pcie_device *dev)
+{
+ int rc;
+ u16 cap_reg;
+ u32 slot_cap;
+ int cap_base;
+ u16 slot_status, slot_ctrl;
+ struct pci_dev *pdev;
+
+ pdev = dev->port;
+ ctrl->pci_dev = pdev; /* save pci_dev in context */
+
+ dbg("%s: hotplug controller vendor id 0x%x device id 0x%x\n",
+ __FUNCTION__, pdev->vendor, pdev->device);
+
+ cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (cap_base == 0) {
+ dbg("%s: Can't find PCI_CAP_ID_EXP (0x10)\n", __FUNCTION__);
+ goto abort;
+ }
+
+ ctrl->cap_base = cap_base;
+
+ dbg("%s: pcie_cap_base %x\n", __FUNCTION__, cap_base);
+
+ rc = pciehp_readw(ctrl, CAPREG, &cap_reg);
+ if (rc) {
+ err("%s: Cannot read CAPREG register\n", __FUNCTION__);
+ goto abort;
+ }
+ dbg("%s: CAPREG offset %x cap_reg %x\n",
+ __FUNCTION__, ctrl->cap_base + CAPREG, cap_reg);
+
+ if (((cap_reg & SLOT_IMPL) == 0) ||
+ (((cap_reg & DEV_PORT_TYPE) != 0x0040)
+ && ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
+ dbg("%s : This is not a root port or the port is not "
+ "connected to a slot\n", __FUNCTION__);
+ goto abort;
+ }
+
+ rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
+ if (rc) {
+ err("%s: Cannot read SLOTCAP register\n", __FUNCTION__);
+ goto abort;
+ }
+ dbg("%s: SLOTCAP offset %x slot_cap %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCAP, slot_cap);
+
+ if (!(slot_cap & HP_CAP)) {
+ dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__);
+ goto abort;
+ }
+ /* For debugging purpose */
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
+ if (rc) {
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
+ goto abort;
+ }
+ dbg("%s: SLOTSTATUS offset %x slot_status %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTSTATUS, slot_status);
+
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
+ if (rc) {
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
+ goto abort;
+ }
+ dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
+
+ for (rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
+ if (pci_resource_len(pdev, rc) > 0)
+ dbg("pci resource[%d] start=0x%llx(len=0x%llx)\n", rc,
+ (unsigned long long)pci_resource_start(pdev, rc),
+ (unsigned long long)pci_resource_len(pdev, rc));
+
+ info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+ pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device);
+
+ mutex_init(&ctrl->crit_sect);
+ mutex_init(&ctrl->ctrl_lock);
+ spin_lock_init(&ctrl->lock);
+
+ /* setup wait queue */
+ init_waitqueue_head(&ctrl->queue);
+
+ /* return PCI Controller Info */
+ ctrl->slot_device_offset = 0;
+ ctrl->num_slots = 1;
+ ctrl->first_slot = slot_cap >> 19;
+ ctrl->ctrlcap = slot_cap & 0x0000007f;
+
+ rc = pcie_init_hardware(ctrl, dev);
+ if (rc == 0) {
+ ctrl->hpc_ops = &pciehp_hpc_ops;
+ return 0;
+ }
+abort:
+ return -1;
+}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists