lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 20 Oct 2007 09:07:03 +0100
From:	Dave Haywood <tla@....selfip.net>
To:	linux-kernel@...r.kernel.org
Subject: PROBLEM: oops, Linus tree: 2.6.23-g4fa4d23f, BUG: unable to handle
 kernel NULL pointer dereference at virtual address 00000004

BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004

Linux s1 2.6.23-g4fa4d23f #4 Fri Oct 19 10:15:50 BST 2007 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux

Gnu C                  4.2.0
Gnu make               3.81
binutils               2.18
util-linux             2.12r
mount                  2.12r
module-init-tools      3.2.2
e2fsprogs              1.40.2
PPP                    2.4.4
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.13
Sh-utils               6.9
udev                   115

Linux version 2.6.23-g4fa4d23f (tla@s1) (gcc version 4.2.0 (Gentoo 4.2.0 p1.4)) #4 Fri Oct 19 10:15:50 BST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fed0000 (usable)
 BIOS-e820: 000000000fed0000 - 000000000fef0000 (ACPI NVS)
 BIOS-e820: 000000000fef0000 - 000000000ff00000 (usable)
 BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000f9bf0
Entering add_active_range(0, 0, 65280) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    65280
  HighMem     65280 ->    65280
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    65280
On node 0 totalpages: 65280
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 478 pages used for memmap
  Normal zone: 60706 pages, LIFO batch:15
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000E0010, 0014 (r0 COMPAQ)
ACPI: RSDT 000E0080, 0054 (r1 COMPAQ CPQ0014  20010612             0)
ACPI: FACP 000E0130, 0074 (r1 COMPAQ SOLANO          1             0)
ACPI: DSDT 000E0204, 0CE6 (r1 COMPAQ     DSDT        1 MSFT  100000D)
ACPI: FACS 000E0040, 0040
ACPI: SSDT 000E0EEA, 0174 (r1 COMPAQ CORE_UTL        1 MSFT  100000D)
ACPI: SSDT 000E105E, 0D3D (r1 COMPAQ VILLTBL1        1 MSFT  100000D)
ACPI: APIC 000E01A4, 0060 (r1 COMPAQ SOLANO          1             0)
ACPI: SSDT 000E2D4F, 0076 (r1 COMPAQ     APIC        1 MSFT  100000D)
ACPI: SSDT 000E1D9B, 06AD (r1 COMPAQ PNP_PRSS        1 MSFT  100000D)
ACPI: SSDT 000E24A6, 01A4 (r1 COMPAQ       S3        1 MSFT  100000D)
ACPI: SSDT 000E264A, 0158 (r1 COMPAQ   PIDETM        1 MSFT  100000D)
ACPI: SSDT 000E28FF, 010B (r1 COMPAQ     GTF0        1 MSFT  100000D)
ACPI: SSDT 000E27A2, 015D (r1 COMPAQ   SIDETM        1 MSFT  100000D)
ACPI: SSDT 000E2B21, 0117 (r1 COMPAQ     GTF2        1 MSFT  100000D)
ACPI: SSDT 000E2EAD, 004E (r1 COMPAQ    FINIS        1 MSFT  100000D)
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0ff00000:eefa0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000000fed0000 - 000000000fef0000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64770
Kernel command line: root=/dev/md4
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 930.368 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252820k/261120k available (3213k kernel code, 7612k reserved, 1274k data, 264k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa7000 - 0xfffff000   ( 352 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
    lowmem  : 0xc0000000 - 0xcff00000   ( 255 MB)
      .init : 0xc0564000 - 0xc05a6000   ( 264 kB)
      .data : 0xc04236bc - 0xc0561f08   (1274 kB)
      .text : 0xc0100000 - 0xc04236bc   (3213 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1862.06 BogoMIPS (lpj=3724128)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 147 Objects with 18 Devices 32 Methods 2 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 100 Objects with 9 Devices 23 Methods 5 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 1 Devices 1 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 21 Objects with 0 Devices 10 Methods 1 Regions
Parsing all Control Methods:
Table [SSDT](id 0006) - 11 Objects with 0 Devices 8 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0007) - 19 Objects with 1 Devices 5 Methods 2 Regions
Parsing all Control Methods:
Table [SSDT](id 0008) - 5 Objects with 1 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0009) - 19 Objects with 1 Devices 5 Methods 2 Regions
Parsing all Control Methods:
Table [SSDT](id 000A) - 5 Objects with 1 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 000B) - 2 Objects with 0 Devices 2 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................
Initialized 8/12 Regions 0/0 Fields 31/31 Buffers 5/12 Packages (345 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 35 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: ioport range 0x400-0x41f has been reserved
system 00:0d: ioport range 0x420-0x43f has been reserved
system 00:0d: ioport range 0x440-0x45f has been reserved
system 00:0d: ioport range 0x460-0x47f has been reserved
system 00:0d: ioport range 0xf800-0xf81f has been reserved
system 00:0d: ioport range 0xf820-0xf83f has been reserved
system 00:0d: ioport range 0xf840-0xf85f has been reserved
system 00:0d: ioport range 0xf860-0xf87f has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xfefffff could not be reserved
system 00:0e: iomem range 0xfff80000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: 40000000-407fffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@...azian.fsnet.co.uk>
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PBTN]
ACPI: Processor [CPU0] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Linux agpgart interface v0.102
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0x44000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xd0816000, 00:05:5d:49:eb:21, IRQ 16
eth0:  Identified 8139 chip type 'RTL-8139C'
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 17
eth1: RealTek RTL8139 at 0xd0818000, 00:10:b5:ac:ea:7d, IRQ 17
eth1:  Identified 8139 chip type 'RTL-8139B'
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 0000:00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
hda: Maxtor 6G160P0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: selected mode 0x44
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6G160P0, ATA DISK drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: selected mode 0x44
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: max request size: 512KiB
hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(66)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 18, io base 0x00002440
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
md: raid1 personality registered for level 1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
md: Autodetecting RAID arrays.
md: Scanned 8 and added 8 devices.
md: autorun ...
md: considering hdc4 ...
md:  adding hdc4 ...
md: hdc3 has different UUID to hdc4
md: hdc2 has different UUID to hdc4
md: hdc1 has different UUID to hdc4
md:  adding hda4 ...
md: hda3 has different UUID to hdc4
md: hda2 has different UUID to hdc4
md: hda1 has different UUID to hdc4
md: created md4
md: bind<hda4>
md: bind<hdc4>
md: running: <hdc4><hda4>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 11/11 pages, set 6 bits
created bitmap (169 pages) for device md4
md: considering hdc3 ...
md:  adding hdc3 ...
md: hdc2 has different UUID to hdc3
md: hdc1 has different UUID to hdc3
md:  adding hda3 ...
md: hda2 has different UUID to hdc3
md: hda1 has different UUID to hdc3
md: created md3
md: bind<hda3>
md: bind<hdc3>
md: running: <hdc3><hda3>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 15/15 pages, set 0 bits
created bitmap (233 pages) for device md3
md: considering hdc2 ...
md:  adding hdc2 ...
md: hdc1 has different UUID to hdc2
md:  adding hda2 ...
md: hda1 has different UUID to hdc2
md: created md2
md: bind<hda2>
md: bind<hdc2>
md: running: <hdc2><hda2>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 8/8 pages, set 0 bits
created bitmap (123 pages) for device md2
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: created md1
md: bind<hda1>
md: bind<hdc1>
md: running: <hdc1><hda1>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 10/10 pages, set 0 bits
created bitmap (153 pages) for device md1
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 264k freed
EXT3 FS on md4, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1999992k swap on /dev/md2.  Priority:-1 extents:1 across:1999992k
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
eth1: no IPv6 routers present
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
printing eip: c0383fa0 *pde = 00000000 
Oops: 0000 [#1] 
CPU:    0
EIP:    0060:[<c0383fa0>]    Not tainted VLI
EFLAGS: 00010282   (2.6.23-g4fa4d23f #4)
EIP is at sk_filter_delayed_uncharge+0x0/0x20
eax: c5dfb600   ebx: 00000000   ecx: 00000000   edx: 00000000
esi: c5dfb600   edi: 00000000   ebp: c170d300   esp: c5dcbef8
ds: 007b   es: 007b   fs: 0000  gs: 0033  ss: 0068
Process dhcpd (pid: 5380, ti=c5dca000 task=c47f0520 task.ti=c5dca000)
Stack: c038410f 00000068 00000058 c5dcbf34 b7fd000b c1b75000 c5dfb600 c0371d19 
       c1b70fd8 c180d300 c1b70f80 00000007 00000001 b7fd000b c170d900 b7fd000b 
       080c9fa0 0000000e 00000000 c5dcbf6c c036dbc2 0000000e c1b75000 00000008 
Call Trace:
 [<c038410f>] sk_attach_filter+0xdf/0x100
 [<c0371d19>] sock_setsockopt+0x509/0x590
 [<c036dbc2>] sockfd_lookup_light+0x32/0x60
 [<c036dd8b>] sys_setsockopt+0x9b/0xb0
 [<c036f705>] sys_socketcall+0xd5/0x280
 [<c010503e>] sysenter_past_esp+0x5f/0x85
 =======================
Code: cb 04 76 c7 83 c1 01 83 ee 01 39 d1 75 8d eb d7 83 7c cb 04 0f 77 b4 83 c1 01 83 ee 01 39 d1 0f 85 76 ff ff ff eb c0 8d 74 26 00 <8b> 4a 04 8d 0c cd 10 00 00 00 29 48 5c 8d 42 08 ba 10 40 38 c0 
EIP: [<c0383fa0>] sk_filter_delayed_uncharge+0x0/0x20 SS:ESP 0068:c5dcbef8



View attachment ".config.oops" of type "text/plain" (36235 bytes)

Powered by blists - more mailing lists