| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200710230453.03281.rob@landley.net>
Date: Tue, 23 Oct 2007 04:53:03 -0500
From: Rob Landley <rob@...dley.net>
To: linux-kernel@...r.kernel.org
Cc: akpm@...ux-foundation.org, tglx@...utronix.de
Subject: [PATCH 3/7] Add section IDs to mtdnand.tmpl
From: Rob Landley <rob@...dley.net>
Add section IDs to mtdnand.tmpl
Signed-off-by: Rob Landley <rob@...dley.net>
---
Documentation/DocBook/mtdnand.tmpl | 58 +++++++++++++--------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff -r a868e8217782 Documentation/DocBook/mtdnand.tmpl
--- a/Documentation/DocBook/mtdnand.tmpl Mon Oct 22 19:40:02 2007 -0700
+++ b/Documentation/DocBook/mtdnand.tmpl Tue Oct 23 04:39:50 2007 -0500
@@ -80,7 +80,7 @@
struct member has a short description which is marked with an [XXX] identifier.
The following chapters explain the meaning of those identifiers.
</para>
- <sect1>
+ <sect1 id="Function_identifiers_XXX">
<title>Function identifiers [XXX]</title>
<para>
The functions are marked with [XXX] identifiers in the short
@@ -115,7 +115,7 @@
</para></listitem>
</itemizedlist>
</sect1>
- <sect1>
+ <sect1 id="Struct_member_identifiers_XXX">
<title>Struct member identifiers [XXX]</title>
<para>
The struct members are marked with [XXX] identifiers in the
@@ -159,7 +159,7 @@
basic functions and fill out some really board dependent
members in the nand chip description structure.
</para>
- <sect1>
+ <sect1 id="Basic_defines">
<title>Basic defines</title>
<para>
At least you have to provide a mtd structure and
@@ -185,7 +185,7 @@ static unsigned long baseaddr;
static unsigned long baseaddr;
</programlisting>
</sect1>
- <sect1>
+ <sect1 id="Partition_defines">
<title>Partition defines</title>
<para>
If you want to divide your device into partitions, then
@@ -204,7 +204,7 @@ static struct mtd_partition partition_in
};
</programlisting>
</sect1>
- <sect1>
+ <sect1 id="Hardware_control_functions">
<title>Hardware control function</title>
<para>
The hardware control function provides access to the
@@ -246,7 +246,7 @@ static void board_hwcontrol(struct mtd_i
}
</programlisting>
</sect1>
- <sect1>
+ <sect1 id="Device_ready_function">
<title>Device ready function</title>
<para>
If the hardware interface has the ready busy pin of the NAND chip connected to a
@@ -257,7 +257,7 @@ static void board_hwcontrol(struct mtd_i
the function must not be defined and the function pointer this->dev_ready is set to NULL.
</para>
</sect1>
- <sect1>
+ <sect1 id="Init_function">
<title>Init function</title>
<para>
The init function allocates memory and sets up all the board
@@ -325,7 +325,7 @@ module_init(board_init);
module_init(board_init);
</programlisting>
</sect1>
- <sect1>
+ <sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
@@ -359,7 +359,7 @@ module_exit(board_cleanup);
driver. For a list of functions which can be overridden by the board
driver see the documentation of the nand_chip structure.
</para>
- <sect1>
+ <sect1 id="Multiple_chip_control">
<title>Multiple chip control</title>
<para>
The nand driver can control chip arrays. Therefor the
@@ -419,9 +419,9 @@ static void board_select_chip (struct mt
}
</programlisting>
</sect1>
- <sect1>
+ <sect1 id="Hardware_ECC_support">
<title>Hardware ECC support</title>
- <sect2>
+ <sect2 id="Functions_and_constants">
<title>Functions and constants</title>
<para>
The nand driver supports three different types of
@@ -475,7 +475,7 @@ static void board_select_chip (struct mt
</itemizedlist>
</para>
</sect2>
- <sect2>
+ <sect2 id="Hardware_ECC_with_syndrome_calculation">
<title>Hardware ECC with syndrome calculation</title>
<para>
Many hardware ECC implementations provide Reed-Solomon
@@ -500,7 +500,7 @@ static void board_select_chip (struct mt
</para>
</sect2>
</sect1>
- <sect1>
+ <sect1 id="Bad_Block_table_support">
<title>Bad block table support</title>
<para>
Most NAND chips mark the bad blocks at a defined
@@ -552,7 +552,7 @@ static void board_select_chip (struct mt
allows faster access than always checking the
bad block information on the flash chip itself.
</para>
- <sect2>
+ <sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
@@ -587,7 +587,7 @@ static void board_select_chip (struct mt
</itemizedlist>
</para>
</sect2>
- <sect2>
+ <sect2 id="User_defined_tables">
<title>User defined tables</title>
<para>
User defined tables are created by filling out a
@@ -676,7 +676,7 @@ static void board_select_chip (struct mt
</para>
</sect2>
</sect1>
- <sect1>
+ <sect1 id="Spare_area_placement">
<title>Spare area (auto)placement</title>
<para>
The nand driver implements different possibilities for
@@ -730,7 +730,7 @@ struct nand_oobinfo {
</para></listitem>
</itemizedlist>
</para>
- <sect2>
+ <sect2 id="Placement_defined_by_fs_driver">
<title>Placement defined by fs driver</title>
<para>
The calling function provides a pointer to a nand_oobinfo
@@ -760,7 +760,7 @@ struct nand_oobinfo {
done according to the given scheme in the nand_oobinfo structure.
</para>
</sect2>
- <sect2>
+ <sect2 id="Automatic_placement">
<title>Automatic placement</title>
<para>
Automatic placement uses the built in defaults to place the
@@ -774,7 +774,7 @@ struct nand_oobinfo {
done according to the default builtin scheme.
</para>
</sect2>
- <sect2>
+ <sect2 id="User_space_placement_selection">
<title>User space placement selection</title>
<para>
All non ecc functions like mtd->read and mtd->write use an internal
@@ -789,9 +789,9 @@ struct nand_oobinfo {
</para>
</sect2>
</sect1>
- <sect1>
+ <sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
- <sect2>
+ <sect2 id="pagesize_256">
<title>256 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@@ -843,7 +843,7 @@ pages this byte is reserved</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
- <sect2>
+ <sect2 id="pagesize_512">
<title>512 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@@ -906,7 +906,7 @@ in this page</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
- <sect2>
+ <sect2 id="pagesize_2048">
<title>2048 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@@ -1126,9 +1126,9 @@ in this page</entry>
<para>
This chapter describes the constants which might be relevant for a driver developer.
</para>
- <sect1>
+ <sect1 id="Chip_option_constants">
<title>Chip option constants</title>
- <sect2>
+ <sect2 id="Constants_for_chip_id_table">
<title>Constants for chip id table</title>
<para>
These constants are defined in nand.h. They are ored together to describe
@@ -1153,7 +1153,7 @@ in this page</entry>
</programlisting>
</para>
</sect2>
- <sect2>
+ <sect2 id="Constants_for_runtime_options">
<title>Constants for runtime options</title>
<para>
These constants are defined in nand.h. They are ored together to describe
@@ -1171,7 +1171,7 @@ in this page</entry>
</sect2>
</sect1>
- <sect1>
+ <sect1 id="EEC_selection_constants">
<title>ECC selection constants</title>
<para>
Use these constants to select the ECC algorithm.
@@ -1192,7 +1192,7 @@ in this page</entry>
</para>
</sect1>
- <sect1>
+ <sect1 id="Hardware_control_related_constants">
<title>Hardware control related constants</title>
<para>
These constants describe the requested hardware access function when
@@ -1218,7 +1218,7 @@ in this page</entry>
</para>
</sect1>
- <sect1>
+ <sect1 id="Bad_block_table_constants">
<title>Bad block table related constants</title>
<para>
These constants describe the options used for bad block
--
"One of my most productive days was throwing away 1000 lines of code."
- Ken Thompson.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists