lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 23 Oct 2007 21:39:35 -0600
From:	Grant Likely <grant.likely@...retlab.ca>
To:	Dragos Carp <dragos.carp@...tica.com>,
	linux-kernel@...r.kernel.org, dbrownell@...rs.sourceforge.net,
	domen.puncer@...argo.com, linuxppc-dev@...abs.org
Subject: [PATCH] mpc5200: psc-spi driver must not touch port_config or cdm
	registers

From: Grant Likely <grant.likely@...retlab.ca>

port_config and the cdm are the responsibility of firmware; and if
firmware doesn't set it up correctly, it should be fixed up by
platform code on a per-board basis because it's a property of the
board.

Drivers should never touch these registers.  They are completely
unprotected and the platform may do odd things with them that the
driver must not interfere with.

Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
---

Domen, Dragos; can you please check your usage of this driver.  None of
the in-tree board ports use it as-is, but they are of course just a
device tree change away from being usable on the lite5200b.

Board ports that use it need to be modified to make the cdm/port_config
changes in firmware (prefered) or in arch/powerpc/platforms/52xx/<board>.c

Cheers,
g.

 drivers/spi/mpc52xx_psc_spi.c |   77 +----------------------------------------
 1 files changed, 2 insertions(+), 75 deletions(-)

diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 7051e6c..ec3a618 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -328,78 +328,15 @@ static void mpc52xx_psc_spi_cleanup(struct spi_device *spi)
 	kfree(spi->controller_state);
 }
 
-static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
+static void mpc52xx_psc_spi_config(int psc_id, struct mpc52xx_psc_spi *mps)
 {
-	struct mpc52xx_cdm __iomem *cdm;
-	struct mpc52xx_gpio __iomem *gpio;
 	struct mpc52xx_psc __iomem *psc = mps->psc;
-	u32 ul;
 	u32 mclken_div;
-	int ret = 0;
-
-#if defined(CONFIG_PPC_MERGE)
-	cdm = mpc52xx_find_and_map("mpc5200-cdm");
-	gpio = mpc52xx_find_and_map("mpc5200-gpio");
-#else
-	cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
-#endif
-	if (!cdm || !gpio) {
-		printk(KERN_ERR "Error mapping CDM/GPIO\n");
-		ret = -EFAULT;
-		goto unmap_regs;
-	}
 
 	/* default sysclk is 512MHz */
 	mclken_div = 0x8000 |
 		(((mps->sysclk ? mps->sysclk : 512000000) / MCLK) & 0x1FF);
 
-	switch (psc_id) {
-	case 1:
-		ul = in_be32(&gpio->port_config);
-		ul &= 0xFFFFFFF8;
-		ul |= 0x00000006;
-		out_be32(&gpio->port_config, ul);
-		out_be16(&cdm->mclken_div_psc1, mclken_div);
-		ul = in_be32(&cdm->clk_enables);
-		ul |= 0x00000020;
-		out_be32(&cdm->clk_enables, ul);
-		break;
-	case 2:
-		ul = in_be32(&gpio->port_config);
-		ul &= 0xFFFFFF8F;
-		ul |= 0x00000060;
-		out_be32(&gpio->port_config, ul);
-		out_be16(&cdm->mclken_div_psc2, mclken_div);
-		ul = in_be32(&cdm->clk_enables);
-		ul |= 0x00000040;
-		out_be32(&cdm->clk_enables, ul);
-		break;
-	case 3:
-		ul = in_be32(&gpio->port_config);
-		ul &= 0xFFFFF0FF;
-		ul |= 0x00000600;
-		out_be32(&gpio->port_config, ul);
-		out_be16(&cdm->mclken_div_psc3, mclken_div);
-		ul = in_be32(&cdm->clk_enables);
-		ul |= 0x00000080;
-		out_be32(&cdm->clk_enables, ul);
-		break;
-	case 6:
-		ul = in_be32(&gpio->port_config);
-		ul &= 0xFF8FFFFF;
-		ul |= 0x00700000;
-		out_be32(&gpio->port_config, ul);
-		out_be16(&cdm->mclken_div_psc6, mclken_div);
-		ul = in_be32(&cdm->clk_enables);
-		ul |= 0x00000010;
-		out_be32(&cdm->clk_enables, ul);
-		break;
-	default:
-		ret = -EINVAL;
-		goto unmap_regs;
-	}
-
 	/* Reset the PSC into a known state */
 	out_8(&psc->command, MPC52xx_PSC_RST_RX);
 	out_8(&psc->command, MPC52xx_PSC_RST_TX);
@@ -421,14 +358,6 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
 	out_8(&psc->ctlr, 0x84);
 
 	mps->bits_per_word = 8;
-
-unmap_regs:
-	if (cdm)
-		iounmap(cdm);
-	if (gpio)
-		iounmap(gpio);
-
-	return ret;
 }
 
 static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
@@ -493,9 +422,7 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	if (ret)
 		goto free_master;
 
-	ret = mpc52xx_psc_spi_port_config(master->bus_num, mps);
-	if (ret < 0)
-		goto free_irq;
+	mpc52xx_psc_spi_config(master->bus_num, mps);
 
 	spin_lock_init(&mps->lock);
 	init_completion(&mps->done);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists