linux-kernel - Re: 2.6.24-rc1 freezes on powerbook at first boot stage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20071104032006.GG9695@localdomain>
Date:	Sat, 3 Nov 2007 22:20:06 -0500
From:	Nathan Lynch <ntl@...ox.com>
To:	Elimar Riesebieter <riesebie@...ec.de>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	linuxppc-dev@...abs.org
Subject: Re: 2.6.24-rc1 freezes on powerbook at first boot stage

(cc'ing linuxppc-dev, see
http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg221770.html
for original post and .config)

Elimar Riesebieter wrote:
> On Wed, 24 Oct 2007 the mental interface of
> Elimar Riesebieter told:
> 
> [...]
> > The kernel is loaded from firmware but freezes at the moment to load
> > the radeon framebuffer. I can't get any debug info (don't know
> > how?).
> 
> Screen dump till freeze:
> 
> Using PowerMac machine description
> Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
> Linux version 2.6.24-rc1-aragorn (riesebie@...gorn) (gcc version 4.2.3 20071014 (prelelease) (Debian 4.2.2-3)) #1 Wed Oct 24 12:48:27 CEST 2007
> Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
> Mapped at 0xfdfc0000
> Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
> PowerMac motherboard: PowerBook G4 15"
> console [udbg0] enabled
> setup_arch: bootmem
> Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->1
> Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->1
> via-pmu: Server Mode is disabled
> PMU driver v2 initialized for Core99, firmware: 0c
> nvram: Checking bank 0...
> nvram: gen0=741, gen1=740
> nvram: Active bank is: 0
> nvram: OF partition at 0x410
> nvram: XP partition at 0x1020
> nvram: NR partition at 0x1120
> arch: exit
> Zone PFN ranges:
>   DMA             0 ->   196608
>   Normal     196608 ->   196608
>   HighMem    196608 ->   262144
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
>     0:        0 ->   262144
> Built 1 zonelists in Zone order.  Total pages: 260096
> Kernel command line: root=/pci@...00000/ata-6@...isk@0:5 root=/dev/hda5
> mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
> mpic: ISU size: 64, shift: 6, mask: 3f
> mpic: Initializing for 64 sources
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> GMT Delta read from XPRAM: 0 minutes, DST: off
> clocksource: timebase mult[d9038e4] shift [22] registered
> clockevent: decremeter mult[4b7] shift[16] cpu[0]
> Console: colour dummy device 80x25
> console handover: boot [udbg0] -> real [tty0]

Does 2.6.23 (or any earlier kernel) work?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/