linux-kernel - RE: [PATCH 2/2] NET: Re-add VLAN tag for devices incapable of keeping it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <78C9135A3D2ECE4B8162EBDCE82CAD77027E9D5E@nekter>
Date:	Mon, 5 Nov 2007 21:39:55 -0500
From:	"Ramkrishna Vepa" <Ramkrishna.Vepa@...erion.com>
To:	"Dave Johnson" <djohnson+linux-kernel@...starentnetworks.com>,
	"David Miller" <davem@...emloft.net>, <jes@...ined-monkey.org>,
	<mchan@...adcom.com>, <ram.vepa@...erion.com>,
	<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
	<bguo@...starentnetworks.com>
Subject: RE: [PATCH 2/2] NET: Re-add VLAN tag for devices incapable of keeping it

The Xframe (S2io) adapter can be programmed dynamically to either,
always strip the vlan tag or not. In this case, if the vlan group is
NULL, it can be programmed at run time to NOT strip the vlan tag.

When a packet with a Vlan id is received that is not added to the group,
should it be dropped or indicated up? Either can be handled by the
hardware. The vlan tag in this particular case will be stripped as the
vlan group is not NULL.

Ram

> -----Original Message-----
> From: Dave Johnson
[mailto:djohnson+linux-kernel@...starentnetworks.com]
> Sent: Monday, November 05, 2007 9:47 AM
> To: David Miller; jes@...ined-monkey.org; mchan@...adcom.com;
> ram.vepa@...erion.com; linux-kernel@...r.kernel.org;
> netdev@...r.kernel.org; bguo@...starentnetworks.com
> Subject: [PATCH 2/2] NET: Re-add VLAN tag for devices incapable of
keeping
> it
> 
> 
> This patch changes the following drivers to use vlan_hwaccel_rx()
> and/or vlan_hwaccel_receive_skb() with a NULL vlan group if needed as
> they are not setup to dynamically enable/disable vlan removal in
> their MAC based on the vlan group:
> 
> drivers/net/tg3.c           Tested on BCM5704, looks good
> drivers/net/bnx2.c          Tested on BCM5708, looks good
> drivers/net/acenic.c        Not tested, I don't have one of these
> drivers/net/s2io.c          Not tested, I don't have one of these
> 
> In addition, these drivers might also need changes, but should
> probably be done by the maintainer as it's not clear exactly what
> change is needed:
> 
> drivers/net/amd8111e.c
> drivers/net/cxgb3/*
> 
> Signed-off-by: Dave Johnson <djohnson@...starentnetworks.com>
> 
> ===== drivers/net/acenic.c 1.77 vs edited =====
> --- 1.77/drivers/net/acenic.c	2007-07-24 16:28:41 -04:00
> +++ edited/drivers/net/acenic.c	2007-11-03 12:27:40 -04:00
> @@ -2036,7 +2036,7 @@
> 
>  		/* send it up */
>  #if ACENIC_DO_VLAN
> -		if (ap->vlgrp && (bd_flags & BD_FLG_VLAN_TAG)) {
> +		if (bd_flags & BD_FLG_VLAN_TAG) {
>  			vlan_hwaccel_rx(skb, ap->vlgrp, retdesc->vlan);
>  		} else
>  #endif
> ===== drivers/net/bnx2.c 1.135 vs edited =====
> --- 1.135/drivers/net/bnx2.c	2007-09-20 15:14:21 -04:00
> +++ edited/drivers/net/bnx2.c	2007-11-05 09:34:26 -05:00
> @@ -2493,7 +2493,8 @@
>  		}
> 
>  #ifdef BCM_VLAN
> -		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp
!= 0))
> {
> +		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
> +		    (bp->vlgrp || (bp->flags & ASF_ENABLE_FLAG))) {
>  			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
>  				rx_hdr->l2_fhdr_vlan_tag);
>  		}
> ===== drivers/net/s2io.c 1.124 vs edited =====
> --- 1.124/drivers/net/s2io.c	2007-08-03 18:10:44 -04:00
> +++ edited/drivers/net/s2io.c	2007-11-03 12:29:09 -04:00
> @@ -6834,8 +6834,7 @@
>  	sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
>  	if (!sp->lro) {
>  		skb->protocol = eth_type_trans(skb, dev);
> -		if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
> -			vlan_strip_flag)) {
> +		if (RXD_GET_VLAN_TAG(rxdp->Control_2) &&
vlan_strip_flag) {
>  			/* Queueing the vlan frame to the upper layer */
>  			if (napi)
>  				vlan_hwaccel_receive_skb(skb, sp->vlgrp,
> ===== drivers/net/tg3.c 1.523 vs edited =====
> --- 1.523/drivers/net/tg3.c	2007-09-11 04:28:44 -04:00
> +++ edited/drivers/net/tg3.c	2007-11-05 09:38:33 -05:00
> @@ -3417,7 +3417,7 @@
> 
>  		skb->protocol = eth_type_trans(skb, tp->dev);
>  #if TG3_VLAN_TAG_USED
> -		if (tp->vlgrp != NULL &&
> +		if ((tp->vlgrp || (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
&&
>  		    desc->type_flags & RXD_FLAG_VLAN) {
>  			tg3_vlan_rx(tp, skb,
>  				    desc->err_vlan & RXD_VLAN_MASK);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/