| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071110214237.GA17340@havoc.gtf.org>
Date: Sat, 10 Nov 2007 16:42:37 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver fixes
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus
to receive the following updates:
MAINTAINERS | 10 ++-
drivers/net/Kconfig | 2 +-
drivers/net/bonding/bond_main.c | 1 +
drivers/net/bonding/bond_sysfs.c | 4 +-
drivers/net/pasemi_mac.c | 18 ++++-
drivers/net/qla3xxx.c | 42 +++++------
drivers/net/qla3xxx.h | 1 +
drivers/net/r8169.c | 26 ++-----
drivers/net/sky2.c | 116 ++++++++++++++++++------------
drivers/net/sky2.h | 3 +-
drivers/net/smc91x.h | 15 ++++
drivers/net/wireless/Kconfig | 2 +-
drivers/net/wireless/b43/Kconfig | 10 ++-
drivers/net/wireless/b43/debugfs.c | 2 +-
drivers/net/wireless/b43/main.c | 19 +++---
drivers/net/wireless/b43/pcmcia.c | 52 +++++++++-----
drivers/net/wireless/b43/rfkill.c | 115 +++++++++++++----------------
drivers/net/wireless/b43/rfkill.h | 14 +---
drivers/net/wireless/b43legacy/debugfs.c | 2 +-
drivers/net/wireless/b43legacy/main.c | 21 +++---
drivers/net/wireless/hostap/hostap_pci.c | 6 +-
drivers/net/wireless/ipw2100.c | 4 +-
drivers/net/wireless/libertas/cmd.c | 10 ++-
drivers/net/wireless/libertas/if_cs.c | 7 ++-
drivers/net/wireless/libertas/if_sdio.c | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 8 ++
26 files changed, 285 insertions(+), 229 deletions(-)
Ciaran McCreesh (1):
r8169: add PCI ID for the 8168 in the Abit Fatal1ty F-190HD motherboard
Francois Romieu (2):
r8169: do not enable the TBI for the 8168 and the 81x0
r8169: prevent bit sign expansion error in mdio_write
Holger Schurig (1):
libertas: fixes for slow hardware
Ivo van Doorn (1):
rt2x00: Block adhoc & master mode
Jay Vosburgh (2):
bonding: fix rtnl locking merge error
bonding: don't validate address at device open
John W. Linville (1):
hermes: clarify Intel reference in Kconfig help
Magnus Damm (1):
ax88796: add superh to kconfig dependencies
Marcelo Tosatti (1):
libertas: properly account for queue commands
Mark Lord (2):
r8169: revert 7da97ec96a0934319c7fbedd3d38baf533e20640 (partly)
r8169: revert 7da97ec96a0934319c7fbedd3d38baf533e20640 (bis repetita)
Michael Buesch (7):
b43: pcmcia-host initialization bugfixes
b43: Fix rfkill callback deadlock
b43: debugfs SHM read buffer overrun fix
b43: Rewrite and fix rfkill init
b43: properly request pcmcia IRQ
b43legacy: Fix sparse warning
b43: Fix kconfig dependencies for rfkill and leds
Olof Johansson (2):
pasemi_mac: Don't set replace-source-address descriptor bits
pasemi_mac: Fix CRC checks
Pierre Ossman (1):
libertas: make if_sdio align packets
Randy Dunlap (1):
hostap: fix section mismatch warning
Roel Kluin (1):
ipw2100: fix postfix decrement errors
Ron Mercer (2):
qla3xxx: bugfix: Move link state machine into a worker thread
qla3xxx: bugfix: Fix bad logical operation in link state machine.
Stefano Brivio (4):
b43legacy: fix possible buffer overrun in debugfs
b43legacy: add me as maintainer and fix URLs
b43: fix shared IRQ race condition
b43legacy: fix shared IRQ race condition
Stephen Hemminger (9):
sky2: enable PCI config writes
sky2: status ring race fix
sky2: longer PHY delay
sky2: dont change LED after autoneg
sky2: remove unneeded mask update
sky2: handle advanced error recovery config issues
sky2: version 1.20
sky2: netpoll on port 0 only
sky2: new pci id's
eric miao (1):
add support for smc91x ethernet interface on zylonite
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c7c229..6a97027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -787,23 +787,25 @@ B43 WIRELESS DRIVER
P: Michael Buesch
M: mb@...sch.de
P: Stefano Brivio
-M: st3@...eup.net
+M: stefano.brivio@...imi.it
L: linux-wireless@...r.kernel.org
-W: http://bcm43xx.berlios.de/
+W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
B43LEGACY WIRELESS DRIVER
P: Larry Finger
M: Larry.Finger@...inger.net
+P: Stefano Brivio
+M: stefano.brivio@...imi.it
L: linux-wireless@...r.kernel.org
-W: http://bcm43xx.berlios.de/
+W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION)
P: Larry Finger
M: Larry.Finger@...inger.net
P: Stefano Brivio
-M: st3@...eup.net
+M: stefano.brivio@...imi.it
L: linux-wireless@...r.kernel.org
W: http://bcm43xx.berlios.de/
S: Maintained
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb581eb..bf8890e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -235,7 +235,7 @@ source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS
+ depends on ARM || MIPS || SUPERH
select CRC32
select MII
help
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6937ef0..a198404 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4405,6 +4405,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params)
bond_dev->set_multicast_list = bond_set_multicast_list;
bond_dev->change_mtu = bond_change_mtu;
bond_dev->set_mac_address = bond_set_mac_address;
+ bond_dev->validate_addr = NULL;
bond_set_mode_ops(bond, bond->params.mode);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 7a06ade..b29330d 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1193,8 +1193,6 @@ static ssize_t bonding_show_active_slave(struct device *d,
struct bonding *bond = to_bond(d);
int count;
- rtnl_lock();
-
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
@@ -1216,7 +1214,9 @@ static ssize_t bonding_store_active_slave(struct device *d,
struct slave *new_active = NULL;
struct bonding *bond = to_bond(d);
+ rtnl_lock();
write_lock_bh(&bond->lock);
+
if (!USES_PRIMARY(bond->params.mode)) {
printk(KERN_INFO DRV_NAME
": %s: Unable to change active slave; %s is in mode %d\n",
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index ab4d309..09b4fde 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -580,6 +580,16 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit)
len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
+ pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE);
+
+ if (macrx & XCT_MACRX_CRC) {
+ /* CRC error flagged */
+ mac->netdev->stats.rx_errors++;
+ mac->netdev->stats.rx_crc_errors++;
+ dev_kfree_skb_irq(skb);
+ goto next;
+ }
+
if (len < 256) {
struct sk_buff *new_skb;
@@ -595,11 +605,10 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit)
} else
info->skb = NULL;
- pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE);
-
info->dma = 0;
- skb_put(skb, len);
+ /* Don't include CRC */
+ skb_put(skb, len-4);
if (likely((macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK)) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -614,6 +623,7 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit)
skb->protocol = eth_type_trans(skb, mac->netdev);
netif_receive_skb(skb);
+next:
RX_RING(mac, n) = 0;
RX_RING(mac, n+1) = 0;
@@ -1126,7 +1136,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
unsigned long flags;
int i, nfrags;
- dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_SS | XCT_MACTX_CRC_PAD;
+ dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
const unsigned char *nh = skb_network_header(skb);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 30adf72..a579111 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1456,16 +1456,11 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
PHYAddr[qdev->mac_index]);
reg &= ~PHY_GIG_ALL_PARAMS;
- if(portConfiguration &
- PORT_CONFIG_FULL_DUPLEX_ENABLED &
- PORT_CONFIG_1000MB_SPEED) {
- reg |= PHY_GIG_ADV_1000F;
- }
-
- if(portConfiguration &
- PORT_CONFIG_HALF_DUPLEX_ENABLED &
- PORT_CONFIG_1000MB_SPEED) {
- reg |= PHY_GIG_ADV_1000H;
+ if(portConfiguration & PORT_CONFIG_1000MB_SPEED) {
+ if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED)
+ reg |= PHY_GIG_ADV_1000F;
+ else
+ reg |= PHY_GIG_ADV_1000H;
}
ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
@@ -1645,8 +1640,11 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev)
return 0;
}
-static void ql_link_state_machine(struct ql3_adapter *qdev)
+static void ql_link_state_machine_work(struct work_struct *work)
{
+ struct ql3_adapter *qdev =
+ container_of(work, struct ql3_adapter, link_state_work.work);
+
u32 curr_link_state;
unsigned long hw_flags;
@@ -1661,6 +1659,10 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
"state.\n", qdev->ndev->name);
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+ /* Restart timer on 2 second interval. */
+ mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);\
+
return;
}
@@ -1705,6 +1707,9 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
break;
}
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+
+ /* Restart timer on 2 second interval. */
+ mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
}
/*
@@ -3941,19 +3946,7 @@ static void ql_get_board_info(struct ql3_adapter *qdev)
static void ql3xxx_timer(unsigned long ptr)
{
struct ql3_adapter *qdev = (struct ql3_adapter *)ptr;
-
- if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) {
- printk(KERN_DEBUG PFX
- "%s: Reset in progress.\n",
- qdev->ndev->name);
- goto end;
- }
-
- ql_link_state_machine(qdev);
-
- /* Restart timer on 2 second interval. */
-end:
- mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);
+ queue_delayed_work(qdev->workqueue, &qdev->link_state_work, 0);
}
static int __devinit ql3xxx_probe(struct pci_dev *pdev,
@@ -4103,6 +4096,7 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev,
qdev->workqueue = create_singlethread_workqueue(ndev->name);
INIT_DELAYED_WORK(&qdev->reset_work, ql_reset_work);
INIT_DELAYED_WORK(&qdev->tx_timeout_work, ql_tx_timeout_work);
+ INIT_DELAYED_WORK(&qdev->link_state_work, ql_link_state_machine_work);
init_timer(&qdev->adapter_timer);
qdev->adapter_timer.function = ql3xxx_timer;
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index fbcb0b9..d0ffb30 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -1286,6 +1286,7 @@ struct ql3_adapter {
struct workqueue_struct *workqueue;
struct delayed_work reset_work;
struct delayed_work tx_timeout_work;
+ struct delayed_work link_state_work;
u32 max_frame_size;
u32 device_id;
u16 phyType;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b94fa7e..1f647b9 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -171,6 +171,8 @@ static struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 },
{ PCI_VENDOR_ID_LINKSYS, 0x1032,
PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
+ { 0x0001, 0x8168,
+ PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
{0,},
};
@@ -468,7 +470,7 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
int i;
- RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0xFF) << 16 | value);
+ RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff));
for (i = 20; i > 0; i--) {
/*
@@ -485,7 +487,7 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr)
{
int i, value = -1;
- RTL_W32(PHYAR, 0x0 | (reg_addr & 0xFF) << 16);
+ RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16);
for (i = 20; i > 0; i--) {
/*
@@ -493,7 +495,7 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr)
* the specified MII register.
*/
if (RTL_R32(PHYAR) & 0x80000000) {
- value = (int) (RTL_R32(PHYAR) & 0xFFFF);
+ value = RTL_R32(PHYAR) & 0xffff;
break;
}
udelay(25);
@@ -1245,16 +1247,6 @@ static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
-static void rtl8168b_hw_phy_config(void __iomem *ioaddr)
-{
- struct phy_reg phy_reg_init[] = {
- { 0x1f, 0x0000 },
- { 0x10, 0xf41b },
- { 0x1f, 0x0000 }
- };
-
- rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
-}
static void rtl8168cp_hw_phy_config(void __iomem *ioaddr)
{
@@ -1324,11 +1316,6 @@ static void rtl_hw_phy_config(struct net_device *dev)
case RTL_GIGA_MAC_VER_04:
rtl8169sb_hw_phy_config(ioaddr);
break;
- case RTL_GIGA_MAC_VER_11:
- case RTL_GIGA_MAC_VER_12:
- case RTL_GIGA_MAC_VER_17:
- rtl8168b_hw_phy_config(ioaddr);
- break;
case RTL_GIGA_MAC_VER_18:
rtl8168cp_hw_phy_config(ioaddr);
break;
@@ -1739,7 +1726,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
RTL_W8(Cfg9346, Cfg9346_Lock);
- if (RTL_R8(PHYstatus) & TBI_Enable) {
+ if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
+ (RTL_R8(PHYstatus) & TBI_Enable)) {
tp->set_speed = rtl8169_set_speed_tbi;
tp->get_settings = rtl8169_gset_tbi;
tp->phy_reset_enable = rtl8169_tbi_reset_enable;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c27c7d6..a2070db 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -52,7 +52,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.19"
+#define DRV_VERSION "1.20"
#define PFX DRV_NAME " "
/*
@@ -121,6 +121,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
@@ -134,6 +135,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
{ 0 }
};
@@ -156,7 +158,7 @@ static const char *yukon2_name[] = {
static void sky2_set_multicast(struct net_device *dev);
-/* Access to external PHY */
+/* Access to PHY via serial interconnect */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
int i;
@@ -166,13 +168,22 @@ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < PHY_RETRIES; i++) {
- if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (!(ctrl & GM_SMI_CT_BUSY))
return 0;
- udelay(1);
+
+ udelay(10);
}
- printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+ dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
@@ -183,23 +194,29 @@ static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < PHY_RETRIES; i++) {
- if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (ctrl & GM_SMI_CT_RD_VAL) {
*val = gma_read16(hw, port, GM_SMI_DATA);
return 0;
}
- udelay(1);
+ udelay(10);
}
+ dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
-static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
{
u16 v;
-
- if (__gm_phy_read(hw, port, reg, &v) != 0)
- printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+ __gm_phy_read(hw, port, reg, &v);
return v;
}
@@ -273,8 +290,6 @@ static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
/* disable all GMAC IRQ's */
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
- /* disable PHY IRQs */
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
gma_write16(hw, port, GM_MC_ADDR_H2, 0);
@@ -1805,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->flags & SKY2_HW_NEWER_PHY) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
-
- switch(sky2->speed) {
- case SPEED_10:
- led |= PHY_M_LEDC_INIT_CTRL(7);
- break;
-
- case SPEED_100:
- led |= PHY_M_LEDC_STA1_CTRL(7);
- break;
-
- case SPEED_1000:
- led |= PHY_M_LEDC_STA0_CTRL(7);
- break;
- }
-
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- }
-
if (netif_msg_link(sky2))
printk(KERN_INFO PFX
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
@@ -2247,20 +2239,26 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
do {
struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
- unsigned port = le->css & CSS_LINK_BIT;
+ unsigned port;
struct net_device *dev;
struct sk_buff *skb;
u32 status;
u16 length;
+ u8 opcode = le->opcode;
+
+ if (!(opcode & HW_OWNER))
+ break;
hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
+ port = le->css & CSS_LINK_BIT;
dev = hw->dev[port];
sky2 = netdev_priv(dev);
length = le16_to_cpu(le->length);
status = le32_to_cpu(le->status);
- switch (le->opcode & ~HW_OWNER) {
+ le->opcode = 0;
+ switch (opcode & ~HW_OWNER) {
case OP_RXSTAT:
++rx[port];
skb = sky2_receive(dev, length, status);
@@ -2353,7 +2351,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
default:
if (net_ratelimit())
printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", le->opcode);
+ "unknown status opcode 0x%x\n", opcode);
}
} while (hw->st_idx != idx);
@@ -2439,13 +2437,26 @@ static void sky2_hw_intr(struct sky2_hw *hw)
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
- int pos = pci_find_aer_capability(hw->pdev);
+ int aer = pci_find_aer_capability(hw->pdev);
u32 err;
- pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err);
+ if (aer) {
+ pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
+ &err);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ } else {
+ /* Either AER not configured, or not working
+ * because of bad MMCONFIG, so just do recover
+ * manually.
+ */
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
+
if (net_ratelimit())
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
- pci_cleanup_aer_uncorrect_error_status(pdev);
+
}
if (status & Y2_HWE_L1_MASK)
@@ -2791,6 +2802,9 @@ static void sky2_reset(struct sky2_hw *hw)
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
+ /* allow writes to PCI config */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
/* clear PCI errors, if any */
pci_read_config_word(pdev, PCI_STATUS, &status);
status |= PCI_STATUS_ERROR_BITS;
@@ -2800,9 +2814,18 @@ static void sky2_reset(struct sky2_hw *hw)
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap) {
- /* Check for advanced error reporting */
- pci_cleanup_aer_uncorrect_error_status(pdev);
- pci_cleanup_aer_correct_error_status(pdev);
+ if (pci_find_aer_capability(pdev)) {
+ /* Check for advanced error reporting */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ pci_cleanup_aer_correct_error_status(pdev);
+ } else {
+ dev_warn(&pdev->dev,
+ "PCI Express Advanced Error Reporting"
+ " not configured or MMCONFIG problem?\n");
+
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
/* If error bit is stuck on ignore it */
if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
@@ -3974,7 +3997,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
dev->tx_timeout = sky2_tx_timeout;
dev->watchdog_timeo = TX_WATCHDOG;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 49ee264..69525fd 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -247,7 +247,8 @@ enum csr_regs {
B3_PA_CTRL = 0x01f0,
B3_PA_TEST = 0x01f2,
- Y2_CFG_SPC = 0x1c00,
+ Y2_CFG_SPC = 0x1c00, /* PCI config space region */
+ Y2_CFG_AER = 0x1d00, /* PCI Advanced Error Report region */
};
/* B0_CTST 16 bit Control/Status register */
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 729fd28..db34e1e 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -224,6 +224,21 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
}
}
+#elif defined(CONFIG_MACH_ZYLONITE)
+
+#define SMC_CAN_USE_8BIT 1
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_IO_SHIFT 0
+#define SMC_NOWAIT 1
+#define SMC_USE_PXA_DMA 1
+#define SMC_inb(a, r) readb((a) + (r))
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
+#define SMC_outb(v, a, r) writeb(v, (a) + (r))
+#define SMC_outw(v, a, r) writew(v, (a) + (r))
+
#elif defined(CONFIG_ARCH_OMAP)
/* We can only do 16-bit reads and writes in the static memory space. */
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index dae5c8d..2b733c5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -325,7 +325,7 @@ config HERMES
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+ IPW2011, and Symbol Spectrum24 High Rate amongst others.
This option includes the guts of the driver, but in order to
actually use a card you will also need to enable support for PCMCIA
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index e3c573e..fdbc351 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -61,16 +61,18 @@ config B43_PCMCIA
If unsure, say N.
-# LED support
+# This config option automatically enables b43 LEDS support,
+# if it's possible.
config B43_LEDS
bool
- depends on B43 && MAC80211_LEDS
+ depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
default y
-# RFKILL support
+# This config option automatically enables b43 RFKILL support,
+# if it's possible.
config B43_RFKILL
bool
- depends on B43 && RFKILL && RFKILL_INPUT && INPUT_POLLDEV
+ depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43)
default y
config B43_DEBUG
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 734e70e..ef0075d 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -128,7 +128,7 @@ static ssize_t shm_read_file(struct b43_wldev *dev,
__le16 *le16buf = (__le16 *)buf;
for (i = 0; i < 0x1000; i++) {
- if (bufsize <= 0)
+ if (bufsize < sizeof(tmp))
break;
tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i);
le16buf[i] = cpu_to_le16(tmp);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5058e60..2b17c1d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2985,6 +2985,16 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
if (b43_status(dev) < B43_STAT_STARTED)
return;
+
+ /* Disable and sync interrupts. We must do this before than
+ * setting the status to INITIALIZED, as the interrupt handler
+ * won't care about IRQs then. */
+ spin_lock_irqsave(&wl->irq_lock, flags);
+ dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
+ b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ b43_synchronize_irq(dev);
+
b43_set_status(dev, B43_STAT_INITIALIZED);
mutex_unlock(&wl->mutex);
@@ -2995,13 +3005,6 @@ static void b43_wireless_core_stop(struct b43_wldev *dev)
ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy.
- /* Disable and sync interrupts. */
- spin_lock_irqsave(&wl->irq_lock, flags);
- dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
- b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- b43_synchronize_irq(dev);
-
b43_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43dbg(wl, "Wireless interface stopped\n");
@@ -3661,7 +3664,6 @@ static int b43_setup_modes(struct b43_wldev *dev,
static void b43_wireless_core_detach(struct b43_wldev *dev)
{
- b43_rfkill_free(dev);
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43_release_firmware(dev);
@@ -3747,7 +3749,6 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43_chip_reset);
- b43_rfkill_alloc(dev);
b43_radio_turn_off(dev, 1);
b43_switch_analog(dev, 0);
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b242a9a..b79a6bd 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -65,12 +65,12 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
tuple_t tuple;
cisparse_t parse;
int err = -ENOMEM;
- int res;
+ int res = 0;
unsigned char buf[64];
ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
if (!ssb)
- goto out;
+ goto out_error;
err = -ENODEV;
tuple.DesiredTuple = CISTPL_CONFIG;
@@ -96,10 +96,12 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->io.NumPorts2 = 0;
dev->io.Attributes2 = 0;
- win.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+ win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
+ WIN_ENABLE | WIN_DATA_WIDTH_16 |
+ WIN_USE_WAIT;
win.Base = 0;
win.Size = SSB_CORE_SIZE;
- win.AccessSpeed = 1000;
+ win.AccessSpeed = 250;
res = pcmcia_request_window(&dev, &win, &dev->win);
if (res != CS_SUCCESS)
goto err_kfree_ssb;
@@ -108,21 +110,34 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
mem.Page = 0;
res = pcmcia_map_mem_page(dev->win, &mem);
if (res != CS_SUCCESS)
- goto err_kfree_ssb;
+ goto err_disable;
+
+ dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
+ dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+ dev->irq.Handler = NULL; /* The handler is registered later. */
+ dev->irq.Instance = NULL;
+ res = pcmcia_request_irq(dev, &dev->irq);
+ if (res != CS_SUCCESS)
+ goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);
if (res != CS_SUCCESS)
goto err_disable;
err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
+ if (err)
+ goto err_disable;
dev->priv = ssb;
- out:
- return err;
- err_disable:
+ return 0;
+
+err_disable:
pcmcia_disable_device(dev);
- err_kfree_ssb:
+err_kfree_ssb:
kfree(ssb);
+out_error:
+ printk(KERN_ERR "b43-pcmcia: Initialization failed (%d, %d)\n",
+ res, err);
return err;
}
@@ -131,22 +146,21 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev)
struct ssb_bus *ssb = dev->priv;
ssb_bus_unregister(ssb);
- pcmcia_release_window(dev->win);
pcmcia_disable_device(dev);
kfree(ssb);
dev->priv = NULL;
}
static struct pcmcia_driver b43_pcmcia_driver = {
- .owner = THIS_MODULE,
- .drv = {
- .name = "b43-pcmcia",
- },
- .id_table = b43_pcmcia_tbl,
- .probe = b43_pcmcia_probe,
- .remove = b43_pcmcia_remove,
- .suspend = b43_pcmcia_suspend,
- .resume = b43_pcmcia_resume,
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "b43-pcmcia",
+ },
+ .id_table = b43_pcmcia_tbl,
+ .probe = b43_pcmcia_probe,
+ .remove = __devexit_p(b43_pcmcia_remove),
+ .suspend = b43_pcmcia_suspend,
+ .resume = b43_pcmcia_resume,
};
int b43_pcmcia_init(void)
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 800e0a6..9b1f905 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -47,32 +47,35 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
struct b43_wldev *dev = poll_dev->private;
struct b43_wl *wl = dev->wl;
bool enabled;
+ bool report_change = 0;
mutex_lock(&wl->mutex);
B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
enabled = b43_is_hw_radio_enabled(dev);
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
+ report_change = 1;
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
- mutex_unlock(&wl->mutex);
+ }
+ mutex_unlock(&wl->mutex);
+
+ if (unlikely(report_change))
input_report_key(poll_dev->input, KEY_WLAN, enabled);
- } else
- mutex_unlock(&wl->mutex);
}
-/* Called when the RFKILL toggled in software.
- * This is called without locking. */
+/* Called when the RFKILL toggled in software. */
static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
{
struct b43_wldev *dev = data;
struct b43_wl *wl = dev->wl;
int err = 0;
- mutex_lock(&wl->mutex);
- if (b43_status(dev) < B43_STAT_INITIALIZED)
- goto out_unlock;
+ if (!wl->rfkill.registered)
+ return 0;
+ mutex_lock(&wl->mutex);
+ B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED);
switch (state) {
case RFKILL_STATE_ON:
if (!dev->radio_hw_enable) {
@@ -89,7 +92,6 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state)
b43_radio_turn_off(dev, 0);
break;
}
-
out_unlock:
mutex_unlock(&wl->mutex);
@@ -98,11 +100,11 @@ out_unlock:
char * b43_rfkill_led_name(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
+ struct b43_rfkill *rfk = &(dev->wl->rfkill);
- if (!wl->rfkill.rfkill)
+ if (!rfk->registered)
return NULL;
- return rfkill_get_led_name(wl->rfkill.rfkill);
+ return rfkill_get_led_name(rfk->rfkill);
}
void b43_rfkill_init(struct b43_wldev *dev)
@@ -111,53 +113,13 @@ void b43_rfkill_init(struct b43_wldev *dev)
struct b43_rfkill *rfk = &(wl->rfkill);
int err;
- if (rfk->rfkill) {
- err = rfkill_register(rfk->rfkill);
- if (err) {
- b43warn(wl, "Failed to register RF-kill button\n");
- goto err_free_rfk;
- }
- }
- if (rfk->poll_dev) {
- err = input_register_polled_device(rfk->poll_dev);
- if (err) {
- b43warn(wl, "Failed to register RF-kill polldev\n");
- goto err_free_polldev;
- }
- }
-
- return;
-err_free_rfk:
- rfkill_free(rfk->rfkill);
- rfk->rfkill = NULL;
-err_free_polldev:
- input_free_polled_device(rfk->poll_dev);
- rfk->poll_dev = NULL;
-}
-
-void b43_rfkill_exit(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (rfk->poll_dev)
- input_unregister_polled_device(rfk->poll_dev);
- if (rfk->rfkill)
- rfkill_unregister(rfk->rfkill);
-}
-
-void b43_rfkill_alloc(struct b43_wldev *dev)
-{
- struct b43_wl *wl = dev->wl;
- struct b43_rfkill *rfk = &(wl->rfkill);
+ rfk->registered = 0;
+ rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
+ if (!rfk->rfkill)
+ goto out_error;
snprintf(rfk->name, sizeof(rfk->name),
"b43-%s", wiphy_name(wl->hw->wiphy));
-
- rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
- if (!rfk->rfkill) {
- b43warn(wl, "Failed to allocate RF-kill button\n");
- return;
- }
rfk->rfkill->name = rfk->name;
rfk->rfkill->state = RFKILL_STATE_ON;
rfk->rfkill->data = dev;
@@ -165,18 +127,45 @@ void b43_rfkill_alloc(struct b43_wldev *dev)
rfk->rfkill->user_claim_unsupported = 1;
rfk->poll_dev = input_allocate_polled_device();
- if (rfk->poll_dev) {
- rfk->poll_dev->private = dev;
- rfk->poll_dev->poll = b43_rfkill_poll;
- rfk->poll_dev->poll_interval = 1000; /* msecs */
- } else
- b43warn(wl, "Failed to allocate RF-kill polldev\n");
+ if (!rfk->poll_dev)
+ goto err_free_rfk;
+ rfk->poll_dev->private = dev;
+ rfk->poll_dev->poll = b43_rfkill_poll;
+ rfk->poll_dev->poll_interval = 1000; /* msecs */
+
+ err = rfkill_register(rfk->rfkill);
+ if (err)
+ goto err_free_polldev;
+ err = input_register_polled_device(rfk->poll_dev);
+ if (err)
+ goto err_unreg_rfk;
+
+ rfk->registered = 1;
+
+ return;
+err_unreg_rfk:
+ rfkill_unregister(rfk->rfkill);
+err_free_polldev:
+ input_free_polled_device(rfk->poll_dev);
+ rfk->poll_dev = NULL;
+err_free_rfk:
+ rfkill_free(rfk->rfkill);
+ rfk->rfkill = NULL;
+out_error:
+ rfk->registered = 0;
+ b43warn(wl, "RF-kill button init failed\n");
}
-void b43_rfkill_free(struct b43_wldev *dev)
+void b43_rfkill_exit(struct b43_wldev *dev)
{
struct b43_rfkill *rfk = &(dev->wl->rfkill);
+ if (!rfk->registered)
+ return;
+ rfk->registered = 0;
+
+ input_unregister_polled_device(rfk->poll_dev);
+ rfkill_unregister(rfk->rfkill);
input_free_polled_device(rfk->poll_dev);
rfk->poll_dev = NULL;
rfkill_free(rfk->rfkill);
diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h
index 29544e8..adacf93 100644
--- a/drivers/net/wireless/b43/rfkill.h
+++ b/drivers/net/wireless/b43/rfkill.h
@@ -15,14 +15,14 @@ struct b43_rfkill {
struct rfkill *rfkill;
/* The poll device for the RFKILL input button */
struct input_polled_dev *poll_dev;
+ /* Did initialization succeed? Used for freeing. */
+ bool registered;
/* The unique name of this rfkill switch */
- char name[32];
+ char name[sizeof("b43-phy4294967295")];
};
-/* All the init functions return void, because we are not interested
+/* The init function returns void, because we are not interested
* in failing the b43 init process when rfkill init failed. */
-void b43_rfkill_alloc(struct b43_wldev *dev);
-void b43_rfkill_free(struct b43_wldev *dev);
void b43_rfkill_init(struct b43_wldev *dev);
void b43_rfkill_exit(struct b43_wldev *dev);
@@ -36,12 +36,6 @@ struct b43_rfkill {
/* empty */
};
-static inline void b43_rfkill_alloc(struct b43_wldev *dev)
-{
-}
-static inline void b43_rfkill_free(struct b43_wldev *dev)
-{
-}
static inline void b43_rfkill_init(struct b43_wldev *dev)
{
}
diff --git a/drivers/net/wireless/b43legacy/debugfs.c b/drivers/net/wireless/b43legacy/debugfs.c
index eefa6fb..619b453 100644
--- a/drivers/net/wireless/b43legacy/debugfs.c
+++ b/drivers/net/wireless/b43legacy/debugfs.c
@@ -124,7 +124,7 @@ static ssize_t shm_read_file(struct b43legacy_wldev *dev, char *buf, size_t bufs
__le16 *le16buf = (__le16 *)buf;
for (i = 0; i < 0x1000; i++) {
- if (bufsize <= 0)
+ if (bufsize < sizeof(tmp))
break;
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 2 * i);
le16buf[i] = cpu_to_le16(tmp);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index f0e56df..3bde1e9 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2781,6 +2781,17 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
return;
+
+ /* Disable and sync interrupts. We must do this before than
+ * setting the status to INITIALIZED, as the interrupt handler
+ * won't care about IRQs then. */
+ spin_lock_irqsave(&wl->irq_lock, flags);
+ dev->irq_savedstate = b43legacy_interrupt_disable(dev,
+ B43legacy_IRQ_ALL);
+ b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ b43legacy_synchronize_irq(dev);
+
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
mutex_unlock(&wl->mutex);
@@ -2791,14 +2802,6 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
ieee80211_stop_queues(wl->hw); /* FIXME this could cause a deadlock */
- /* Disable and sync interrupts. */
- spin_lock_irqsave(&wl->irq_lock, flags);
- dev->irq_savedstate = b43legacy_interrupt_disable(dev,
- B43legacy_IRQ_ALL);
- b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- b43legacy_synchronize_irq(dev);
-
b43legacy_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43legacydbg(wl, "Wireless interface stopped\n");
@@ -3332,7 +3335,7 @@ out_mutex_unlock:
return err;
}
-void b43legacy_stop(struct ieee80211_hw *hw)
+static void b43legacy_stop(struct ieee80211_hw *hw)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index 7da3664..fc876ba 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -444,7 +444,7 @@ static int prism2_pci_resume(struct pci_dev *pdev)
MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
-static struct pci_driver prism2_pci_drv_id = {
+static struct pci_driver prism2_pci_driver = {
.name = "hostap_pci",
.id_table = prism2_pci_id_table,
.probe = prism2_pci_probe,
@@ -458,13 +458,13 @@ static struct pci_driver prism2_pci_drv_id = {
static int __init init_prism2_pci(void)
{
- return pci_register_driver(&prism2_pci_drv_id);
+ return pci_register_driver(&prism2_pci_driver);
}
static void __exit exit_prism2_pci(void)
{
- pci_unregister_driver(&prism2_pci_drv_id);
+ pci_unregister_driver(&prism2_pci_driver);
}
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 8d53d08..fc6cdd8 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -1267,7 +1267,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
IPW2100_INTA_FATAL_ERROR |
IPW2100_INTA_PARITY_ERROR);
}
- } while (i--);
+ } while (--i);
/* Clear out any pending INTAs since we aren't supposed to have
* interrupts enabled at this point... */
@@ -1339,7 +1339,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
break;
- } while (i--);
+ } while (--i);
priv->status &= ~STATUS_RESET_PENDING;
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 1cbbd96..be5cfd8 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -912,6 +912,10 @@ static int wlan_cmd_set_boot2_ver(wlan_private * priv,
return 0;
}
+/*
+ * Note: NEVER use libertas_queue_cmd() with addtail==0 other than for
+ * the command timer, because it does not account for queued commands.
+ */
void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u8 addtail)
{
unsigned long flags;
@@ -941,10 +945,11 @@ void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u
spin_lock_irqsave(&adapter->driver_lock, flags);
- if (addtail)
+ if (addtail) {
list_add_tail((struct list_head *)cmdnode,
&adapter->cmdpendingq);
- else
+ adapter->nr_cmd_pending++;
+ } else
list_add((struct list_head *)cmdnode, &adapter->cmdpendingq);
spin_unlock_irqrestore(&adapter->driver_lock, flags);
@@ -1412,7 +1417,6 @@ int libertas_prepare_and_send_command(wlan_private * priv,
cmdnode->cmdwaitqwoken = 0;
libertas_queue_cmd(adapter, cmdnode, 1);
- adapter->nr_cmd_pending++;
wake_up_interruptible(&priv->waitq);
if (wait_option & CMD_OPTION_WAITFORRSP) {
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 0360cad..ec89dab 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -148,11 +148,11 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r
{
int i;
- for (i = 0; i < 500; i++) {
+ for (i = 0; i < 1000; i++) {
u8 val = if_cs_read8(card, addr);
if (val == reg)
return i;
- udelay(100);
+ udelay(500);
}
return -ETIME;
}
@@ -878,6 +878,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out3;
}
+ /* Clear any interrupt cause that happend while sending
+ * firmware/initializing card */
+ if_cs_write16(card, IF_CS_C_INT_CAUSE, IF_CS_C_IC_MASK);
if_cs_enable_ints(card);
/* And finally bring the card up */
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a8e1707..b24425f 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -182,12 +182,14 @@ static int if_sdio_handle_data(struct if_sdio_card *card,
goto out;
}
- skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+ skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
if (!skb) {
ret = -ENOMEM;
goto out;
}
+ skb_reserve(skb, NET_IP_ALIGN);
+
data = skb_put(skb, size);
memcpy(data, buffer, size);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 4a6a0bd..85ea8a8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -196,6 +196,14 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
+ /* FIXME: Beaconing is broken in rt2x00. */
+ if (conf->type == IEEE80211_IF_TYPE_IBSS ||
+ conf->type == IEEE80211_IF_TYPE_AP) {
+ ERROR(rt2x00dev,
+ "rt2x00 does not support Adhoc or Master mode");
+ return -EOPNOTSUPP;
+ }
+
/*
* Don't allow interfaces to be added while
* either the device has disappeared or when
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists