Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC Command line: root=/dev/disk/by-id/scsi-1AMCC_0278095931E5540026BE-part2 vga=0x31a resume=/dev/sda1 splash=silent BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000da000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff00000 (usable) BIOS-e820: 000000007ff00000 - 000000007ff11000 (ACPI data) BIOS-e820: 000000007ff11000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000280000000 (usable) Entering add_active_range(0, 0, 154) 0 entries of 3200 used Entering add_active_range(0, 256, 524032) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2621440) 2 entries of 3200 used end_pfn_map = 2621440 DMI present. ACPI: RSDP 000F78C0, 0014 (r0 PTLTD ) ACPI: RSDT 7FF0B188, 0040 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 7FF10A3E, 0074 (r1 NVIDIA CK8S 6040000 PTL_ F4240) ACPI: DSDT 7FF0B1C8, 5876 (r1 NVIDIA CK8 6040000 MSFT 100000E) ACPI: FACS 7FF11FC0, 0040 ACPI: SRAT 7FF10AB2, 0110 (r1 AMD HAMMER 6040000 AMD 1) ACPI: SPCR 7FF10BC2, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: MCFG 7FF10C12, 003C (r1 PTLTD MCFG 6040000 0) ACPI: APIC 7FF10C4E, 009E (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7FF10CEC, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 7FF10D14, 02EC (r1 PTLTD POWERNOW 6040000 LTP 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 154) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 0, 154) 1 entries of 3200 used Entering add_active_range(0, 256, 524032) 1 entries of 3200 used SRAT: Node 0 PXM 0 0-180000000 Entering add_active_range(0, 0, 154) 2 entries of 3200 used Entering add_active_range(0, 256, 524032) 2 entries of 3200 used Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used SRAT: Node 1 PXM 1 180000000-280000000 Entering add_active_range(1, 1572864, 2621440) 3 entries of 3200 used NUMA: Using 31 for the hash shift. Bootmem setup node 0 0000000000000000-0000000180000000 Bootmem setup node 1 0000000180000000-0000000280000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2621440 early_node_map[4] active PFN ranges 0: 0 -> 154 0: 256 -> 524032 0: 1048576 -> 1572864 1: 1572864 -> 2621440 On node 0 totalpages: 1048218 DMA zone: 56 pages used for memmap DMA zone: 1281 pages reserved DMA zone: 2657 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505656 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 On node 1 totalpages: 1048576 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 14336 pages used for memmap Normal zone: 1034240 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xc0000000] gsi_base[24]) IOAPIC[1]: apic_id 5, address 0xc0000000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xc0001000] gsi_base[28]) IOAPIC[2]: apic_id 6, address 0xc0001000, GSI 28-31 ACPI: IOAPIC (id[0x07] address[0xc4000000] gsi_base[32]) IOAPIC[3]: apic_id 7, address 0xc4000000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009a000 - 000000000009b000 swsusp: Registered nosave memory region: 000000000009b000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000da000 swsusp: Registered nosave memory region: 00000000000da000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007ff00000 - 000000007ff11000 swsusp: Registered nosave memory region: 000000007ff11000 - 000000007ff80000 swsusp: Registered nosave memory region: 000000007ff80000 - 0000000080000000 swsusp: Registered nosave memory region: 0000000080000000 - 00000000e0000000 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000fff80000 swsusp: Registered nosave memory region: 00000000fff80000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 50296 bytes of per cpu data Built 2 zonelists. Total pages: 2059673 Kernel command line: root=/dev/disk/by-id/scsi-1AMCC_0278095931E5540026BE-part2 vga=0x31a resume=/dev/sda1 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2009.281 MHz processor. Console: colour dummy device 80x25 Checking aperture... CPU 0: aperture @ 8e000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 8168312k/10485760k available (2050k kernel code, 218864k reserved, 1017k data, 316k init) Calibrating delay using timer specific routine.. 4021.00 BogoMIPS (lpj=8042017) Security Framework v1.0.0 initialized Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 4326k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 757 Objects with 95 Devices 280 Methods 29 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 12 Objects with 0 Devices 0 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. result 12558022 Detected 12.558 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4018.82 BogoMIPS (lpj=8037651) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 270 stepping 02 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 4018.81 BogoMIPS (lpj=8037628) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual Core AMD Opteron(tm) Processor 270 stepping 02 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4018.88 BogoMIPS (lpj=8037760) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual Core AMD Opteron(tm) Processor 270 stepping 02 Brought up 4 CPUs migration_cost=395,472 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e07fffff PCI: No mmconfig possible on device 00:18 PCI: No mmconfig possible on device 00:19 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:......................................................................................... Initialized 29/29 Regions 2/2 Fields 29/29 Buffers 29/41 Packages (778 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 101 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Root Bridge [PCI2] (0000:10) PCI: Probing PCI hardware (bus 10) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:80) PCI: Probing PCI hardware (bus 80) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 48 49 50 51) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 52 53 54 55) *0, disabled. ACPI: PCI Interrupt Link [LSI1] (IRQs 52 53 54 55) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:00: iomem range 0xfefff000-0xfeffffff has been reserved pnp: 00:02: ioport range 0x8000-0x807f has been reserved pnp: 00:02: ioport range 0x8080-0x80ff has been reserved pnp: 00:02: ioport range 0x8400-0x847f has been reserved pnp: 00:02: ioport range 0x8480-0x84ff has been reserved pnp: 00:02: ioport range 0x8800-0x887f has been reserved pnp: 00:02: ioport range 0x8880-0x88ff has been reserved pnp: 00:02: ioport range 0xa000-0xa03f has been reserved pnp: 00:02: ioport range 0xa040-0xa07f has been reserved PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:02:00.0 PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: 91000000-92ffffff PREFETCH window: a0000000-bfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:10:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:0b.0 IO window: 2000-2fff MEM window: c0100000-c01fffff PREFETCH window: c2000000-c3ffffff PCI: Bridge: 0000:80:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:80:0e.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 25165824 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1194881060.740:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:02:00.0 PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:10:0a.0 subordinate bus. PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:10:0b.0 subordinate bus. PCI: Found disabled HT MSI Mapping on 0000:80:0e.0 PCI: Found enabled HT MSI Mapping on 0000:80:00.0 PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie01] Allocate Port Service[0000:00:0e.0:pcie03] PCI: Setting latency timer of device 0000:80:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0e.0:pcie00] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:0e.0:pcie01 failed with error 2 vesafb: framebuffer at 0xa0000000, mapped to 0xffffc20003000000, using 10240k, total 131072k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 98233 bytes bootsplash: ...found (1280x1024, 35219 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 NET: Registered protocol family 1 Freeing unused kernel memory: 316k freed SCSI subsystem initialized 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. ACPI: PCI Interrupt 0000:12:04.0[A] -> GSI 28 (level, low) -> IRQ 28 scsi0 : 3ware 9000 Storage Controller 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xc0100000, IRQ: 28. 3w-9xxx: scsi0: Firmware FE9X 3.04.00.005, BIOS BE9X 3.04.00.002, Ports: 8. scsi 0:0:0:0: Direct-Access AMCC 9550SXU-8L DISK 3.04 PQ: 0 ANSI: 3 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0x90000000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 usb usb1: configuration #1 chosen from 1 choice sd 0:0:0:0: [sda] 624955392 512-byte hardware sectors (319977 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 624955392 512-byte hardware sectors (319977 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0x90001000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd usb usb2: SerialNumber: 0000:00:02.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: new device found, idVendor=046d, idProduct=c03e usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB-PS/2 Optical Mouse usb 1-1: Manufacturer: Logitech usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver swsusp: Marking nosave pages: 000000000009a000 - 0000000000100000 swsusp: Marking nosave pages: 000000007ff00000 - 0000000100000000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] libata version 3.00 loaded. ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ffb00000-0x00000000ffffffff - kernel bug? forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. i2c-adapter i2c-0: nForce2 SMBus adapter at 0xa000 i2c-adapter i2c-1: nForce2 SMBus adapter at 0xa040 pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi1 : pata_amd scsi2 : pata_amd CFI: Found no ck804xrom @ffc00000 device at location zero ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011c00 irq 14 ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011c08 irq 15 JEDEC: Found no ck804xrom @ffc00000 device at location zero CFI: Found no ck804xrom @ffc00000 device at location zero JEDEC: Found no ck804xrom @ffc00000 device at location zero CFI: Found no ck804xrom @ffc00000 device at location zero JEDEC: Found no ck804xrom @ffc00000 device at location zero CFI: Found no ck804xrom @ffc10000 device at location zero JEDEC: Found no ck804xrom @ffc10000 device at location zero CFI: Found no ck804xrom @ffc10000 device at location zero JEDEC: Found no ck804xrom @ffc10000 device at location zero CFI: Found no ck804xrom @ffc10000 device at location zero JEDEC: Found no ck804xrom @ffc10000 device at location zero CFI: Found no ck804xrom @ffc20000 device at location zero JEDEC: Found no ck804xrom @ffc20000 device at location zero CFI: Found no ck804xrom @ffc20000 device at location zero JEDEC: Found no ck804xrom @ffc20000 device at location zero CFI: Found no ck804xrom @ffc20000 device at location zero JEDEC: Found no ck804xrom @ffc20000 device at location zero CFI: Found no ck804xrom @ffc30000 device at location zero JEDEC: Found no ck804xrom @ffc30000 device at location zero CFI: Found no ck804xrom @ffc30000 device at location zero JEDEC: Found no ck804xrom @ffc30000 device at location zero CFI: Found no ck804xrom @ffc30000 device at location zero JEDEC: Found no ck804xrom @ffc30000 device at location zero CFI: Found no ck804xrom @ffc40000 device at location zero JEDEC: Found no ck804xrom @ffc40000 device at location zero CFI: Found no ck804xrom @ffc40000 device at location zero JEDEC: Found no ck804xrom @ffc40000 device at location zero CFI: Found no ck804xrom @ffc40000 device at location zero JEDEC: Found no ck804xrom @ffc40000 device at location zero CFI: Found no ck804xrom @ffc50000 device at location zero JEDEC: Found no ck804xrom @ffc50000 device at location zero CFI: Found no ck804xrom @ffc50000 device at location zero JEDEC: Found no ck804xrom @ffc50000 device at location zero CFI: Found no ck804xrom @ffc50000 device at location zero JEDEC: Found no ck804xrom @ffc50000 device at location zero CFI: Found no ck804xrom @ffc60000 device at location zero JEDEC: Found no ck804xrom @ffc60000 device at location zero CFI: Found no ck804xrom @ffc60000 device at location zero JEDEC: Found no ck804xrom @ffc60000 device at location zero CFI: Found no ck804xrom @ffc60000 device at location zero JEDEC: Found no ck804xrom @ffc60000 device at location zero CFI: Found no ck804xrom @ffc70000 device at location zero JEDEC: Found no ck804xrom @ffc70000 device at location zero CFI: Found no ck804xrom @ffc70000 device at location zero JEDEC: Found no ck804xrom @ffc70000 device at location zero CFI: Found no ck804xrom @ffc70000 device at location zero JEDEC: Found no ck804xrom @ffc70000 device at location zero CFI: Found no ck804xrom @ffc80000 device at location zero JEDEC: Found no ck804xrom @ffc80000 device at location zero CFI: Found no ck804xrom @ffc80000 device at location zero JEDEC: Found no ck804xrom @ffc80000 device at location zero CFI: Found no ck804xrom @ffc80000 device at location zero JEDEC: Found no ck804xrom @ffc80000 device at location zero CFI: Found no ck804xrom @ffc90000 device at location zero JEDEC: Found no ck804xrom @ffc90000 device at location zero CFI: Found no ck804xrom @ffc90000 device at location zero JEDEC: Found no ck804xrom @ffc90000 device at location zero CFI: Found no ck804xrom @ffc90000 device at location zero JEDEC: Found no ck804xrom @ffc90000 device at location zero CFI: Found no ck804xrom @ffca0000 device at location zero JEDEC: Found no ck804xrom @ffca0000 device at location zero CFI: Found no ck804xrom @ffca0000 device at location zero JEDEC: Found no ck804xrom @ffca0000 device at location zero CFI: Found no ck804xrom @ffca0000 device at location zero JEDEC: Found no ck804xrom @ffca0000 device at location zero CFI: Found no ck804xrom @ffcb0000 device at location zero JEDEC: Found no ck804xrom @ffcb0000 device at location zero CFI: Found no ck804xrom @ffcb0000 device at location zero JEDEC: Found no ck804xrom @ffcb0000 device at location zero CFI: Found no ck804xrom @ffcb0000 device at location zero JEDEC: Found no ck804xrom @ffcb0000 device at location zero CFI: Found no ck804xrom @ffcc0000 device at location zero JEDEC: Found no ck804xrom @ffcc0000 device at location zero CFI: Found no ck804xrom @ffcc0000 device at location zero JEDEC: Found no ck804xrom @ffcc0000 device at location zero CFI: Found no ck804xrom @ffcc0000 device at location zero JEDEC: Found no ck804xrom @ffcc0000 device at location zero CFI: Found no ck804xrom @ffcd0000 device at location zero JEDEC: Found no ck804xrom @ffcd0000 device at location zero CFI: Found no ck804xrom @ffcd0000 device at location zero JEDEC: Found no ck804xrom @ffcd0000 device at location zero CFI: Found no ck804xrom @ffcd0000 device at location zero JEDEC: Found no ck804xrom @ffcd0000 device at location zero CFI: Found no ck804xrom @ffce0000 device at location zero JEDEC: Found no ck804xrom @ffce0000 device at location zero CFI: Found no ck804xrom @ffce0000 device at location zero JEDEC: Found no ck804xrom @ffce0000 device at location zero CFI: Found no ck804xrom @ffce0000 device at location zero JEDEC: Found no ck804xrom @ffce0000 device at location zero CFI: Found no ck804xrom @ffcf0000 device at location zero JEDEC: Found no ck804xrom @ffcf0000 device at location zero CFI: Found no ck804xrom @ffcf0000 device at location zero JEDEC: Found no ck804xrom @ffcf0000 device at location zero CFI: Found no ck804xrom @ffcf0000 device at location zero JEDEC: Found no ck804xrom @ffcf0000 device at location zero CFI: Found no ck804xrom @ffd00000 device at location zero JEDEC: Found no ck804xrom @ffd00000 device at location zero CFI: Found no ck804xrom @ffd00000 device at location zero JEDEC: Found no ck804xrom @ffd00000 device at location zero CFI: Found no ck804xrom @ffd00000 device at location zero JEDEC: Found no ck804xrom @ffd00000 device at location zero CFI: Found no ck804xrom @ffd10000 device at location zero JEDEC: Found no ck804xrom @ffd10000 device at location zero CFI: Found no ck804xrom @ffd10000 device at location zero JEDEC: Found no ck804xrom @ffd10000 device at location zero CFI: Found no ck804xrom @ffd10000 device at location zero JEDEC: Found no ck804xrom @ffd10000 device at location zero CFI: Found no ck804xrom @ffd20000 device at location zero JEDEC: Found no ck804xrom @ffd20000 device at location zero CFI: Found no ck804xrom @ffd20000 device at location zero JEDEC: Found no ck804xrom @ffd20000 device at location zero CFI: Found no ck804xrom @ffd20000 device at location zero JEDEC: Found no ck804xrom @ffd20000 device at location zero CFI: Found no ck804xrom @ffd30000 device at location zero JEDEC: Found no ck804xrom @ffd30000 device at location zero CFI: Found no ck804xrom @ffd30000 device at location zero JEDEC: Found no ck804xrom @ffd30000 device at location zero CFI: Found no ck804xrom @ffd30000 device at location zero JEDEC: Found no ck804xrom @ffd30000 device at location zero CFI: Found no ck804xrom @ffd40000 device at location zero JEDEC: Found no ck804xrom @ffd40000 device at location zero CFI: Found no ck804xrom @ffd40000 device at location zero JEDEC: Found no ck804xrom @ffd40000 device at location zero CFI: Found no ck804xrom @ffd40000 device at location zero JEDEC: Found no ck804xrom @ffd40000 device at location zero CFI: Found no ck804xrom @ffd50000 device at location zero JEDEC: Found no ck804xrom @ffd50000 device at location zero CFI: Found no ck804xrom @ffd50000 device at location zero JEDEC: Found no ck804xrom @ffd50000 device at location zero CFI: Found no ck804xrom @ffd50000 device at location zero JEDEC: Found no ck804xrom @ffd50000 device at location zero CFI: Found no ck804xrom @ffd60000 device at location zero JEDEC: Found no ck804xrom @ffd60000 device at location zero CFI: Found no ck804xrom @ffd60000 device at location zero JEDEC: Found no ck804xrom @ffd60000 device at location zero CFI: Found no ck804xrom @ffd60000 device at location zero JEDEC: Found no ck804xrom @ffd60000 device at location zero CFI: Found no ck804xrom @ffd70000 device at location zero JEDEC: Found no ck804xrom @ffd70000 device at location zero CFI: Found no ck804xrom @ffd70000 device at location zero JEDEC: Found no ck804xrom @ffd70000 device at location zero CFI: Found no ck804xrom @ffd70000 device at location zero JEDEC: Found no ck804xrom @ffd70000 device at location zero CFI: Found no ck804xrom @ffd80000 device at location zero JEDEC: Found no ck804xrom @ffd80000 device at location zero CFI: Found no ck804xrom @ffd80000 device at location zero JEDEC: Found no ck804xrom @ffd80000 device at location zero CFI: Found no ck804xrom @ffd80000 device at location zero JEDEC: Found no ck804xrom @ffd80000 device at location zero CFI: Found no ck804xrom @ffd90000 device at location zero JEDEC: Found no ck804xrom @ffd90000 device at location zero CFI: Found no ck804xrom @ffd90000 device at location zero JEDEC: Found no ck804xrom @ffd90000 device at location zero CFI: Found no ck804xrom @ffd90000 device at location zero JEDEC: Found no ck804xrom @ffd90000 device at location zero CFI: Found no ck804xrom @ffda0000 device at location zero JEDEC: Found no ck804xrom @ffda0000 device at location zero CFI: Found no ck804xrom @ffda0000 device at location zero JEDEC: Found no ck804xrom @ffda0000 device at location zero CFI: Found no ck804xrom @ffda0000 device at location zero JEDEC: Found no ck804xrom @ffda0000 device at location zero CFI: Found no ck804xrom @ffdb0000 device at location zero JEDEC: Found no ck804xrom @ffdb0000 device at location zero CFI: Found no ck804xrom @ffdb0000 device at location zero JEDEC: Found no ck804xrom @ffdb0000 device at location zero CFI: Found no ck804xrom @ffdb0000 device at location zero JEDEC: Found no ck804xrom @ffdb0000 device at location zero CFI: Found no ck804xrom @ffdc0000 device at location zero JEDEC: Found no ck804xrom @ffdc0000 device at location zero CFI: Found no ck804xrom @ffdc0000 device at location zero JEDEC: Found no ck804xrom @ffdc0000 device at location zero CFI: Found no ck804xrom @ffdc0000 device at location zero JEDEC: Found no ck804xrom @ffdc0000 device at location zero CFI: Found no ck804xrom @ffdd0000 device at location zero JEDEC: Found no ck804xrom @ffdd0000 device at location zero CFI: Found no ck804xrom @ffdd0000 device at location zero JEDEC: Found no ck804xrom @ffdd0000 device at location zero CFI: Found no ck804xrom @ffdd0000 device at location zero JEDEC: Found no ck804xrom @ffdd0000 device at location zero CFI: Found no ck804xrom @ffde0000 device at location zero JEDEC: Found no ck804xrom @ffde0000 device at location zero CFI: Found no ck804xrom @ffde0000 device at location zero JEDEC: Found no ck804xrom @ffde0000 device at location zero CFI: Found no ck804xrom @ffde0000 device at location zero JEDEC: Found no ck804xrom @ffde0000 device at location zero CFI: Found no ck804xrom @ffdf0000 device at location zero JEDEC: Found no ck804xrom @ffdf0000 device at location zero CFI: Found no ck804xrom @ffdf0000 device at location zero JEDEC: Found no ck804xrom @ffdf0000 device at location zero CFI: Found no ck804xrom @ffdf0000 device at location zero JEDEC: Found no ck804xrom @ffdf0000 device at location zero CFI: Found no ck804xrom @ffe00000 device at location zero JEDEC: Found no ck804xrom @ffe00000 device at location zero CFI: Found no ck804xrom @ffe00000 device at location zero JEDEC: Found no ck804xrom @ffe00000 device at location zero CFI: Found no ck804xrom @ffe00000 device at location zero JEDEC: Found no ck804xrom @ffe00000 device at location zero CFI: Found no ck804xrom @ffe10000 device at location zero JEDEC: Found no ck804xrom @ffe10000 device at location zero CFI: Found no ck804xrom @ffe10000 device at location zero JEDEC: Found no ck804xrom @ffe10000 device at location zero CFI: Found no ck804xrom @ffe10000 device at location zero JEDEC: Found no ck804xrom @ffe10000 device at location zero CFI: Found no ck804xrom @ffe20000 device at location zero JEDEC: Found no ck804xrom @ffe20000 device at location zero CFI: Found no ck804xrom @ffe20000 device at location zero JEDEC: Found no ck804xrom @ffe20000 device at location zero CFI: Found no ck804xrom @ffe20000 device at location zero JEDEC: Found no ck804xrom @ffe20000 device at location zero CFI: Found no ck804xrom @ffe30000 device at location zero JEDEC: Found no ck804xrom @ffe30000 device at location zero CFI: Found no ck804xrom @ffe30000 device at location zero JEDEC: Found no ck804xrom @ffe30000 device at location zero CFI: Found no ck804xrom @ffe30000 device at location zero JEDEC: Found no ck804xrom @ffe30000 device at location zero CFI: Found no ck804xrom @ffe40000 device at location zero JEDEC: Found no ck804xrom @ffe40000 device at location zero CFI: Found no ck804xrom @ffe40000 device at location zero JEDEC: Found no ck804xrom @ffe40000 device at location zero CFI: Found no ck804xrom @ffe40000 device at location zero JEDEC: Found no ck804xrom @ffe40000 device at location zero CFI: Found no ck804xrom @ffe50000 device at location zero JEDEC: Found no ck804xrom @ffe50000 device at location zero CFI: Found no ck804xrom @ffe50000 device at location zero JEDEC: Found no ck804xrom @ffe50000 device at location zero CFI: Found no ck804xrom @ffe50000 device at location zero JEDEC: Found no ck804xrom @ffe50000 device at location zero CFI: Found no ck804xrom @ffe60000 device at location zero JEDEC: Found no ck804xrom @ffe60000 device at location zero CFI: Found no ck804xrom @ffe60000 device at location zero JEDEC: Found no ck804xrom @ffe60000 device at location zero CFI: Found no ck804xrom @ffe60000 device at location zero JEDEC: Found no ck804xrom @ffe60000 device at location zero CFI: Found no ck804xrom @ffe70000 device at location zero JEDEC: Found no ck804xrom @ffe70000 device at location zero CFI: Found no ck804xrom @ffe70000 device at location zero JEDEC: Found no ck804xrom @ffe70000 device at location zero CFI: Found no ck804xrom @ffe70000 device at location zero JEDEC: Found no ck804xrom @ffe70000 device at location zero CFI: Found no ck804xrom @ffe80000 device at location zero JEDEC: Found no ck804xrom @ffe80000 device at location zero CFI: Found no ck804xrom @ffe80000 device at location zero JEDEC: Found no ck804xrom @ffe80000 device at location zero CFI: Found no ck804xrom @ffe80000 device at location zero JEDEC: Found no ck804xrom @ffe80000 device at location zero CFI: Found no ck804xrom @ffe90000 device at location zero JEDEC: Found no ck804xrom @ffe90000 device at location zero CFI: Found no ck804xrom @ffe90000 device at location zero JEDEC: Found no ck804xrom @ffe90000 device at location zero CFI: Found no ck804xrom @ffe90000 device at location zero JEDEC: Found no ck804xrom @ffe90000 device at location zero CFI: Found no ck804xrom @ffea0000 device at location zero JEDEC: Found no ck804xrom @ffea0000 device at location zero CFI: Found no ck804xrom @ffea0000 device at location zero JEDEC: Found no ck804xrom @ffea0000 device at location zero CFI: Found no ck804xrom @ffea0000 device at location zero JEDEC: Found no ck804xrom @ffea0000 device at location zero CFI: Found no ck804xrom @ffeb0000 device at location zero JEDEC: Found no ck804xrom @ffeb0000 device at location zero CFI: Found no ck804xrom @ffeb0000 device at location zero JEDEC: Found no ck804xrom @ffeb0000 device at location zero CFI: Found no ck804xrom @ffeb0000 device at location zero JEDEC: Found no ck804xrom @ffeb0000 device at location zero CFI: Found no ck804xrom @ffec0000 device at location zero JEDEC: Found no ck804xrom @ffec0000 device at location zero CFI: Found no ck804xrom @ffec0000 device at location zero JEDEC: Found no ck804xrom @ffec0000 device at location zero CFI: Found no ck804xrom @ffec0000 device at location zero JEDEC: Found no ck804xrom @ffec0000 device at location zero CFI: Found no ck804xrom @ffed0000 device at location zero JEDEC: Found no ck804xrom @ffed0000 device at location zero CFI: Found no ck804xrom @ffed0000 device at location zero JEDEC: Found no ck804xrom @ffed0000 device at location zero CFI: Found no ck804xrom @ffed0000 device at location zero JEDEC: Found no ck804xrom @ffed0000 device at location zero CFI: Found no ck804xrom @ffee0000 device at location zero JEDEC: Found no ck804xrom @ffee0000 device at location zero CFI: Found no ck804xrom @ffee0000 device at location zero JEDEC: Found no ck804xrom @ffee0000 device at location zero CFI: Found no ck804xrom @ffee0000 device at location zero JEDEC: Found no ck804xrom @ffee0000 device at location zero CFI: Found no ck804xrom @ffef0000 device at location zero JEDEC: Found no ck804xrom @ffef0000 device at location zero CFI: Found no ck804xrom @ffef0000 device at location zero JEDEC: Found no ck804xrom @ffef0000 device at location zero CFI: Found no ck804xrom @ffef0000 device at location zero JEDEC: Found no ck804xrom @ffef0000 device at location zero CFI: Found no ck804xrom @fff00000 device at location zero JEDEC: Found no ck804xrom @fff00000 device at location zero CFI: Found no ck804xrom @fff00000 device at location zero JEDEC: Found no ck804xrom @fff00000 device at location zero CFI: Found no ck804xrom @fff00000 device at location zero Found: SST 49LF080A ck804xrom @fff00000: Found 1 x8 devices at 0x0 in 8-bit bank pci_hotplug: PCI Hot Plug PCI Core version: 0.5 number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:06 failed with error -16 sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:07.0 to 64 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx scsi3 : sata_nv scsi4 : sata_nv ata3: SATA max UDMA/133 cmd 0x0000000000011c40 ctl 0x0000000000011c36 bmdma 0x0000000000011c10 irq 21 ata4: SATA max UDMA/133 cmd 0x0000000000011c38 ctl 0x0000000000011c32 bmdma 0x0000000000011c18 irq 21 ata3: SATA link down (SStatus 0 SControl 310) ata4: SATA link down (SStatus 0 SControl 310) ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi5 : sata_nv scsi6 : sata_nv ata5: SATA max UDMA/133 cmd 0x0000000000011c58 ctl 0x0000000000011c4e bmdma 0x0000000000011c20 irq 20 ata6: SATA max UDMA/133 cmd 0x0000000000011c50 ctl 0x0000000000011c4a bmdma 0x0000000000011c28 irq 20 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata5.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100 ata5.00: configured for UDMA/100 ata6: SATA link down (SStatus 0 SControl 310) scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB00 PQ: 0 ANSI: 5 scsi 5:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 58828 usecs intel8x0: clocking to 47062 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 floppy0: no floppy controllers found eth0: forcedeth.c: subsystem: 010f1:2895 bound to 0000:00:0a.0 shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 55 ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LMAC] -> GSI 55 (level, high) -> IRQ 55 PCI: Setting latency timer of device 0000:80:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 010f1:2895 bound to 0000:80:0a.0 Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1194881072.800:2): type=1505 info="AppArmor initialized" pid=2329 powernow-k8: Found 4 Dual Core AMD Opteron(tm) Processor 270 processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 mtrr: type mismatch for a0000000,8000000 old: write-back new: write-combining ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team audit(1194881083.934:3): audit_pid=3458 old=0 by auid=4294967295