| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1194901236-22820-3-git-send-email-sam@ravnborg.org>
Date: Mon, 12 Nov 2007 22:00:26 +0100
From: Sam Ravnborg <sam@...nborg.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: Sam Ravnborg <sam@...nborg.org>, Adrian Bunk <bunk@...nel.org>,
Brian Gerst <bgerst@...ntduck.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>
Subject: [PATCH] x86: arch/x86/Kconfig.cpu unification
Move all CPU definitions to Kconfig.cpu
Always define X86_MINIMUM_CPU_FAMILY and do the
obvious code cleanup in boot/cpucheck.c
Comments from: Adrian Bunk <bunk@...nel.org> incorporated.
Signed-off-by: Sam Ravnborg <sam@...nborg.org>
Cc: Adrian Bunk <bunk@...nel.org>
Cc: Brian Gerst <bgerst@...ntduck.org>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...hat.com>
Cc: "H. Peter Anvin" <hpa@...or.com>
---
arch/x86/Kconfig | 19 +++++++
arch/x86/Kconfig.cpu | 121 ++++++++++++++++++++++++++++-----------------
arch/x86/Kconfig.x86_64 | 83 +-------------------------------
arch/x86/boot/cpucheck.c | 6 --
4 files changed, 95 insertions(+), 134 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1382c5..e741fc7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1,3 +1,22 @@
+# x86 configuration
+
+### Arch settings
+config RWSEM_GENERIC_SPINLOCK
+ def_bool !X86_XADD
+
+config RWSEM_XCHGADD_ALGORITHM
+ def_bool X86_XADD
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+
menu "Power management options"
depends on !X86_VOYAGER
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 0e2adad..c301622 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -3,11 +3,12 @@ if !X86_ELAN
choice
prompt "Processor family"
- default M686
+ default M686 if X86_32
+ default GENERIC_CPU if X86_64
config M386
bool "386"
- depends on !UML
+ depends on X86_32 && !UML
---help---
This is the processor type of your CPU. This information is used for
optimizing purposes. In order to compile a kernel that can run on
@@ -49,6 +50,7 @@ config M386
config M486
bool "486"
+ depends on X86_32
help
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
@@ -57,6 +59,7 @@ config M486
config M586
bool "586/K5/5x86/6x86/6x86MX"
+ depends on X86_32
help
Select this for an 586 or 686 series processor such as the AMD K5,
the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
@@ -64,18 +67,21 @@ config M586
config M586TSC
bool "Pentium-Classic"
+ depends on X86_32
help
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction for benchmarking.
config M586MMX
bool "Pentium-MMX"
+ depends on X86_32
help
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config M686
bool "Pentium-Pro"
+ depends on X86_32
help
Select this for Intel Pentium Pro chips. This enables the use of
Pentium Pro extended instructions, and disables the init-time guard
@@ -83,6 +89,7 @@ config M686
config MPENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
+ depends on X86_32
help
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core. This option enables an unaligned
@@ -92,6 +99,7 @@ config MPENTIUMII
config MPENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ depends on X86_32
help
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core. This option enables use of some
@@ -100,19 +108,14 @@ config MPENTIUMIII
config MPENTIUMM
bool "Pentium M"
+ depends on X86_32
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
-config MCORE2
- bool "Core 2/newer Xeon"
- help
- Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
- CPUs. You can distinguish newer from older Xeons by the CPU family
- in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
config MPENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+ depends on X86_32
help
Select this for Intel Pentium 4 chips. This includes the
Pentium 4, Pentium D, P4-based Celeron and Xeon, and
@@ -148,6 +151,7 @@ config MPENTIUM4
config MK6
bool "K6/K6-II/K6-III"
+ depends on X86_32
help
Select this for an AMD K6-family processor. Enables use of
some extended instructions, and passes appropriate optimization
@@ -155,6 +159,7 @@ config MK6
config MK7
bool "Athlon/Duron/K7"
+ depends on X86_32
help
Select this for an AMD Athlon K7-family processor. Enables use of
some extended instructions, and passes appropriate optimization
@@ -169,6 +174,7 @@ config MK8
config MCRUSOE
bool "Crusoe"
+ depends on X86_32
help
Select this for a Transmeta Crusoe processor. Treats the processor
like a 586 with TSC, and sets some GCC optimization flags (like a
@@ -176,11 +182,13 @@ config MCRUSOE
config MEFFICEON
bool "Efficeon"
+ depends on X86_32
help
Select this for a Transmeta Efficeon processor.
config MWINCHIPC6
bool "Winchip-C6"
+ depends on X86_32
help
Select this for an IDT Winchip C6 chip. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -188,6 +196,7 @@ config MWINCHIPC6
config MWINCHIP2
bool "Winchip-2"
+ depends on X86_32
help
Select this for an IDT Winchip-2. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -195,6 +204,7 @@ config MWINCHIP2
config MWINCHIP3D
bool "Winchip-2A/Winchip-3"
+ depends on X86_32
help
Select this for an IDT Winchip-2A or 3. Linux and GCC
treat this chip as a 586TSC with some extended instructions
@@ -204,16 +214,19 @@ config MWINCHIP3D
config MGEODEGX1
bool "GeodeGX1"
+ depends on X86_32
help
Select this for a Geode GX1 (Cyrix MediaGX) chip.
config MGEODE_LX
bool "Geode GX/LX"
+ depends on X86_32
help
Select this for AMD Geode GX and LX processors.
config MCYRIXIII
bool "CyrixIII/VIA-C3"
+ depends on X86_32
help
Select this for a Cyrix III or C3 chip. Presently Linux and GCC
treat this chip as a generic 586. Whilst the CPU is 686 class,
@@ -225,6 +238,7 @@ config MCYRIXIII
config MVIAC3_2
bool "VIA C3-2 (Nehemiah)"
+ depends on X86_32
help
Select this for a VIA C3 "Nehemiah". Selecting this enables usage
of SSE and tells gcc to treat the CPU as a 686.
@@ -232,15 +246,42 @@ config MVIAC3_2
config MVIAC7
bool "VIA C7"
+ depends on X86_32
help
Select this for a VIA C7. Selecting this uses the correct cache
shift and tells gcc to treat the CPU as a 686.
+config MPSC
+ bool "Intel P4 / older Netburst based Xeon"
+ depends on X86_64
+ help
+ Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+ Xeon CPUs with Intel 64bit which is compatible with x86-64.
+ Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
+ Netburst core and shouldn't use this option. You can distinguish them
+ using the cpu family field
+ in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+
+config MCORE2
+ bool "Core 2/newer Xeon"
+ help
+ Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+ CPUs. You can distinguish newer from older Xeons by the CPU family
+ in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config GENERIC_CPU
+ bool "Generic-x86-64"
+ depends on X86_64
+ help
+ Generic x86-64 CPU.
+ Run equally well on all x86-64 CPUs.
+
endchoice
config X86_GENERIC
- bool "Generic x86 support"
- help
+ bool "Generic x86 support"
+ depends on X86_32
+ help
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
generic optimizations as well. This will make the kernel
@@ -253,44 +294,31 @@ endif
#
# Define implied options from the CPU selection here
-#
+config X86_L1_CACHE_BYTES
+ int
+ default "128" if GENERIC_CPU || MPSC
+ default "64" if MK8 || MCORE2
+ depends on X86_64
+
+config X86_INTERNODE_CACHE_BYTES
+ int
+ default "4096" if X86_VSMP
+ default X86_L1_CACHE_BYTES if !X86_VSMP
+ depends on X86_64
+
config X86_CMPXCHG
- bool
- depends on !M386
- default y
+ def_bool X86_64 || (X86_32 && !M386)
config X86_L1_CACHE_SHIFT
int
- default "7" if MPENTIUM4 || X86_GENERIC
+ default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
config X86_XADD
bool
- depends on !M386
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- depends on !X86_XADD
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- depends on X86_XADD
- default y
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_CALIBRATE_DELAY
- bool
+ depends on X86_32 && !M386
default y
config X86_PPRO_FENCE
@@ -305,22 +333,22 @@ config X86_F00F_BUG
config X86_WP_WORKS_OK
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_INVLPG
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_BSWAP
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_POPAD_OK
bool
- depends on !M386
+ depends on X86_32 && !M386
default y
config X86_ALIGNMENT_16
@@ -330,7 +358,7 @@ config X86_ALIGNMENT_16
config X86_GOOD_APIC
bool
- depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
default y
config X86_INTEL_USERCOPY
@@ -355,7 +383,7 @@ config X86_OOSTORE
config X86_TSC
bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+ depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
default y
# this should be set for all -march=.. options where the compiler
@@ -367,6 +395,7 @@ config X86_CMOV
config X86_MINIMUM_CPU_FAMILY
int
- default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+ default "64" if X86_64
+ default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
default "3"
diff --git a/arch/x86/Kconfig.x86_64 b/arch/x86/Kconfig.x86_64
index 264623c..cdd1458 100644
--- a/arch/x86/Kconfig.x86_64
+++ b/arch/x86/Kconfig.x86_64
@@ -78,25 +78,10 @@ config ISA
config SBUS
bool
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
config GENERIC_HWEIGHT
bool
default y
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config X86_CMPXCHG
- bool
- default y
-
config GENERIC_ISA_DMA
bool
default y
@@ -125,13 +110,6 @@ config GENERIC_BUG
default y
depends on BUG
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
source "init/Kconfig"
@@ -159,66 +137,7 @@ config X86_VSMP
endchoice
-choice
- prompt "Processor family"
- default GENERIC_CPU
-
-config MK8
- bool "AMD-Opteron/Athlon64"
- help
- Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
-
-config MPSC
- bool "Intel P4 / older Netburst based Xeon"
- help
- Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
- Xeon CPUs with Intel 64bit which is compatible with x86-64.
- Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
- Netburst core and shouldn't use this option. You can distinguish them
- using the cpu family field
- in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
-
-config MCORE2
- bool "Intel Core2 / newer Xeon"
- help
- Optimize for Intel Core2 and newer Xeons (51xx)
- You can distinguish the newer Xeons from the older ones using
- the cpu family field in /proc/cpuinfo. 15 is an older Xeon
- (use CONFIG_MPSC then), 6 is a newer one.
-
-config GENERIC_CPU
- bool "Generic-x86-64"
- help
- Generic x86-64 CPU.
- Run equally well on all x86-64 CPUs.
-
-endchoice
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_L1_CACHE_BYTES
- int
- default "128" if GENERIC_CPU || MPSC
- default "64" if MK8 || MCORE2
-
-config X86_L1_CACHE_SHIFT
- int
- default "7" if GENERIC_CPU || MPSC
- default "6" if MK8 || MCORE2
-
-config X86_INTERNODE_CACHE_BYTES
- int
- default "4096" if X86_VSMP
- default X86_L1_CACHE_BYTES if !X86_VSMP
-
-config X86_TSC
- bool
- default y
-
-config X86_GOOD_APIC
- bool
- default y
+source "arch/x86/Kconfig.cpu"
config MICROCODE
tristate "/dev/cpu/microcode - Intel CPU microcode support"
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index e655a89..769065b 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -42,13 +42,7 @@ static struct cpu_features cpu;
static u32 cpu_vendor[3];
static u32 err_flags[NCAPINTS];
-#ifdef CONFIG_X86_64
-static const int req_level = 64;
-#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
-#else
-static const int req_level = 3;
-#endif
static const u32 req_flags[NCAPINTS] =
{
--
1.5.3.4.1157.g0e74-dirty
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists