lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 14 Nov 2007 13:47:30 +0900
From:	"Joonwoo Park" <joonwpark81@...il.com>
To:	"'Kok, Auke'" <auke-jan.h.kok@...el.com>,
	"'Patrick McHardy'" <kaber@...sh.net>
Cc:	"'Herbert Xu'" <herbert@...dor.apana.org.au>,
	"'David Miller'" <davem@...emloft.net>, <w@....eu>,
	<cfriesen@...tel.com>, <netdev@...r.kernel.org>,
	<djohnson+linux-kernel@...starentnetworks.com>,
	<linux-kernel@...r.kernel.org>, <e1000-devel@...ts.sourceforge.net>
Subject: RE: [PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode

2007/11/14, Kok, Auke <auke-jan.h.kok@...el.com>:
> Patrick McHardy wrote:
> > Kok, Auke wrote:
> >> Patrick McHardy wrote:
> >>
> >>> I already posted a patch for this, not sure what happened to it.
> >>> Auke, any news on merging the secondary unicast address support?
> >>
> >> I dropped the ball on that one. Care to resend it and send me one for
> >> e1000e as well?
> >
> > Patch for e1000 attached.
> >
> > Does e1000e also work with PCI cards if I add the proper IDs?
> > Otherwise I could only send an untested patch.
> 
> 
> Johnwoo,
> 
> your patch unfortunately does not apply after patrick's unicast patch,
> 
> also, ich8lan support is removed from e1000 in the e1000 version in
> jgarzik/netdev-2.6 #upstream as planned (moved over to e1000e!).
> 
> Can you resend your patch so that it applies to jgarzik/netdev-2.6 #upstream with
> Patrick's patch applied? That would help a lot. And possibly do the e1000e patch
> as well :)
> 

This is a patch for the jgarzik/netdev-2.6 #upstream with Patrick's one was applied.
But the ich8lan stuff was not removed at this patch.
I'll work e1000e too :-)

Thanks.
Joonwoo

[E1000]: Disable vlan hw accel when promiscuous mode

Even though netdevice is in the promiscuous mode, we should receive all of ingress packets.
This disable the vlan filtering feature when a vlan hw accel configured e1000 device goes into promiscuous mode.
This make packets visible to sniffers though it's not vlan id of itself.

Signed-off-by: Joonwoo Park <joonwpark81@...il.com>

---
 drivers/net/e1000/e1000_main.c |   23 ++++++++++++++++++-----
 1 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5fd5f51..edf2ced 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2425,7 +2425,7 @@ e1000_set_rx_mode(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	struct dev_addr_list *uc_ptr;
 	struct dev_addr_list *mc_ptr;
-	uint32_t rctl;
+	uint32_t rctl, ctrl;
 	uint32_t hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
 	int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
@@ -2442,13 +2442,23 @@ e1000_set_rx_mode(struct net_device *netdev)
 	/* Check for Promiscuous and All Multicast modes */
 
 	rctl = E1000_READ_REG(hw, RCTL);
+	ctrl = E1000_READ_REG(hw, CTRL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-	} else if (netdev->flags & IFF_ALLMULTI) {
-		rctl |= E1000_RCTL_MPE;
+		if (adapter->hw.mac_type != e1000_ich8lan) {
+			if (ctrl & E1000_CTRL_VME)
+				rctl &= ~E1000_RCTL_VFE;
+		}
 	} else {
-		rctl &= ~E1000_RCTL_MPE;
+		if (adapter->hw.mac_type != e1000_ich8lan) {
+			if (ctrl & E1000_CTRL_VME)
+				rctl |= E1000_RCTL_VFE;
+		} else if (netdev->flags & IFF_ALLMULTI) {
+			rctl |= E1000_RCTL_MPE;
+		} else {
+			rctl &= ~E1000_RCTL_MPE;
+		}
 	}
 
 	uc_ptr = NULL;
@@ -4967,7 +4977,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		if (adapter->hw.mac_type != e1000_ich8lan) {
 			/* enable VLAN receive filtering */
 			rctl = E1000_READ_REG(&adapter->hw, RCTL);
-			rctl |= E1000_RCTL_VFE;
+			if (netdev->flags & IFF_PROMISC)
+				rctl &= ~E1000_RCTL_VFE;
+			else
+				rctl |= E1000_RCTL_VFE;
 			rctl &= ~E1000_RCTL_CFIEN;
 			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
 			e1000_update_mng_vlan(adapter);
---

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists