| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BD261180E6D35F4D9D32F3E44FD3D9010AAE886B@EMPBEDEX.empirix.com>
Date: Wed, 14 Nov 2007 15:12:59 -0500
From: "Morrison, Tom" <tmorrison@...irix.com>
To: "Mark Lord" <liml@....ca>
Cc: "Jeff Garzik" <jeff@...zik.org>, <linux-ide@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
OK:
32-bit linux - Large Physical Memory / Large PTE
(CONFIG_PTE_64BIT & CONFIG_PHYS_64BIT)
4 Gig of DDR RAM
Here is the lspci -vv
-bash-2.05b# lspci -vv
00:00.0 Power PC: Unknown device 1957:0012 (rev 20)
!!! Invalid class 0b20 for header type 01
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=11, sec-latency=0
I/O behind bridge: 00000000-00000fff
Memory behind bridge: ea900000-eeffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [4c] #10 [0041]
01:00.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at eefe0000 (32-bit, non-prefetchable)
[size=128K]
Bus: primary=01, secondary=02, subordinate=11, sec-latency=0
I/O behind bridge: 07ffe000-07ffffff
Memory behind bridge: ea900000-eeefffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0051]
02:01.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=03, subordinate=08, sec-latency=0
Memory behind bridge: ec000000-eeefffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:02.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=02, secondary=09, subordinate=09, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:03.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=0a, subordinate=0b, sec-latency=0
Memory behind bridge: eac00000-ebffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:08.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 07fff000-07ffffff
Memory behind bridge: eab00000-eabfffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:09.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=0d, subordinate=0f, sec-latency=0
I/O behind bridge: 07ffe000-07ffefff
Memory behind bridge: ea900000-eaafffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:0a.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=02, secondary=10, subordinate=10, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
02:0b.0 PCI bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=02, secondary=11, subordinate=11, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
03:00.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at eeee0000 (32-bit, non-prefetchable)
[size=128K]
Bus: primary=03, secondary=04, subordinate=08, sec-latency=0
Memory behind bridge: ec000000-eedfffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0051]
04:01.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
04:02.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=04, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: ec000000-eedfffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
04:03.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=04, secondary=07, subordinate=07, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
04:04.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Bus: primary=04, secondary=08, subordinate=08, sec-latency=0
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
06:00.0 Bridge: PLX Technology, Inc.: Unknown device 8532 (rev ba)
Subsystem: PLX Technology, Inc.: Unknown device 8532
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 51
Region 0: Memory at eede0000 (32-bit, non-prefetchable)
[size=128K]
Region 2: Memory at ec000000 (32-bit, non-prefetchable)
[size=32M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0001]
0a:00.0 PCI bridge: PLX Technology, Inc.: Unknown device 8111 (rev 21)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at ebff0000 (64-bit, prefetchable) [size=64K]
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: eac00000-ebefffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] #10 [0071]
0b:00.0 Class ff00: C-PORT Corp: Unknown device 0002 (rev 20)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin A routed to IRQ 51
Region 0: Memory at ebe00000 (32-bit, prefetchable) [size=1M]
Region 1: Memory at ebd00000 (32-bit, prefetchable) [size=1M]
Region 2: Memory at eb800000 (32-bit, prefetchable) [size=4M]
Region 3: Memory at eb400000 (32-bit, prefetchable) [size=4M]
Region 4: Memory at eb000000 (32-bit, prefetchable) [size=4M]
Region 5: Memory at eac00000 (32-bit, prefetchable) [size=4M]
0c:00.0 SCSI storage controller: Galileo Technology Ltd.: Unknown device
7042 (rev 02)
Subsystem: Galileo Technology Ltd.: Unknown device 11ab
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 48
Region 0: Memory at eab00000 (64-bit, non-prefetchable)
[size=1M]
Region 2: I/O ports at 7ffff00 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] #10 [0011]
0d:00.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at eaae0000 (32-bit, non-prefetchable)
[size=128K]
Bus: primary=0d, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 07ffe000-07ffefff
Memory behind bridge: ea900000-ea9fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0051]
0e:01.0 PCI bridge: PLX Technology, Inc.: Unknown device 8508 (rev aa)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: 07ffe000-07ffefff
Memory behind bridge: ea900000-ea9fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] #10 [0161]
0f:00.0 Fibre Channel: QLogic Corp.: Unknown device 2432 (rev 02)
Subsystem: QLogic Corp.: Unknown device 0137
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at 7ffef00 [size=256]
Region 1: Memory at ea9fc000 (64-bit, non-prefetchable)
[size=16K]
Expansion ROM at <unassigned> [disabled] [size=256K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [4c] #10 [0001]
Capabilities: [64] Message Signalled Interrupts: 64bit+
Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [74] Vital Product Data
Capabilities: [7c] #11 [000f]
-bash-2.05b#
-----Original Message-----
From: Mark Lord [mailto:liml@....ca]
Sent: Wednesday, November 14, 2007 1:31 PM
To: Morrison, Tom
Cc: Jeff Garzik; linux-ide@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
Morrison, Tom wrote:
..
> ::: Can you give me exact details of how to set up and reproduce this?
> ::: -- Kernel version
>
> Linux-2.6.23.1
>
> NOTE: I am using ppc (arch/ppc instead of arch/powerpc)
..
Okay. Is that 32-bit or 64-bit? How much RAM ?
My PPC machine is not currently set up for Linux,
and has only PCIX (not PCIe) slots, so I'll try this
first on an x86-32 box with PCIe.
If it works for me there, then I may be able to try
a PCIX card in my PPC-32 box later. The PCIX card
won't have a 7042 of course, so I'll use a 6081 instead.
Those earlier Marvell chips are supposed to be extremely similar.
>
> ::: -- number/config/model of drives
>
> 2x250GIG Western Digital - 3 partitions (largest (/dev/sda3
> ~200Gig - formatted to ext2).
>
> 7042 PEX on a MPC8548 Board
>
> ::: -- exact command line sequence to cause the failure
>
> NFS mount root file system (I am currently rebuild to take away
> the NFS file system dependency) - /dev/sda3 is drive in
> question...
>
> a) mount /dev/sda3 /mnt/src
> b) cp large_500Meg_file /mnt/src/.
>
> ==========================================================
> ==========================================================
> NOTE: this does NOT fail on a 2.6.11 kernel version!!!!
> So I do NOT think it's a hardware problem!
>
> It could be a PEX related problem with arch/ppc - I would
> expect under heavy pounding with smaller files it would
> fail as well - but it does NOT)
> ==========================================================
> ==========================================================
>
> Anything else you need to know?
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide"
in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists