lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <473C0CCE.40407@ce.chalmers.se>
Date:	Thu, 15 Nov 2007 10:09:34 +0100
From:	Patric Karlsson <patric@...chalmers.se>
To:	Grzegorz Kulewski <kangur@...com.net>
CC:	Tejun Heo <htejun@...il.com>, Jeff Garzik <jeff@...zik.org>,
	linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
	Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: libata_uli puts second channel to PIO4 on 2.6.18

Grzegorz Kulewski wrote:
> On Wed, 7 Feb 2007, Tejun Heo wrote:
>> Grzegorz Kulewski wrote:
>>>  It worked very well for half a year but with one disk (IIRC it was even
>>>  plugged into second channel but I wont bet on it). Now I have second 
>>> disk
>>>  (very similar) and it is always put into PIO4 mode:
>>>
>>>  [   17.404451] libata version 2.00 loaded.
>>>  [   17.404916] sata_uli 0000:00:04.0: version 1.0
>>>  [   17.405009] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level, 
>>> low)
>>>  -> IRQ 185
>>>  [   17.405223] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 
>>> 0xB000
>>>  irq 185
>>>  [   17.405385] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma 
>>> 0xB008
>>>  irq 185
>>>  [   17.405519] scsi2 : sata_uli
>>>  [   17.858803] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>>>  [   17.880541] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: 
>>> LBA48 NCQ
>>>  (depth 0/32)
>>>  [   17.880660] ata1.00: ata1: dev 0 multi count 16
>>>  [   17.888858] ata1.00: configured for UDMA/133
>>>  [   17.888941] scsi3 : sata_uli
>>>  [   18.342469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>>>  [   18.343573] ata2.00: ATA-7, max UDMA/133, 488397168 sectors: 
>>> LBA48 NCQ
>>>  (depth 0/32)
>>>  [   18.343691] ata2.00: ata2: dev 0 multi count 16
>>>  [   18.344972] ata2.00: configured for PIO4
>>
>> Some uli controllers have simplex bit stuck high indicating that they
>> can't perform DMA transfers simultaneously on both channels.  In this
>> case, libata configures the second channel as PIO only.  This has been
>> worked around by the following commit.
>>
>> commit b2a8bbe67d73631c71492fd60b757fc50a87f182
>> Author: Tejun Heo <htejun@...il.com>
>> Date:   Thu Jan 25 19:40:05 2007 +0900
>>
>>   libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uli
>>
>>    Some uli controllers have stuck SIMPLEX bit which can't be cleared
>>    with ata_pci_clear_simplex(), but the controller is capable of doing
>>    DMAs on both channels simultaneously.  Implement ATA_FLAG_IGN_SIMPLEX
>>    which makes libata ignore the simplex bit and use it in sata_uli.
>>
>>    Signed-off-by: Tejun Heo <htejun@...il.com>
>>    Signed-off-by: Jeff Garzik <jeff@...zik.org>
>>
>> For quick fix, just comment out lines which set ATA_HOST_SIMPLEX in
>> drivers/scsi/libata-bmdma.c.  e.g.
>>
>>      /*if (inb(bmdma + 2) & 0x80)
>>          probe_ent->host_set_flags |= ATA_HOST_SIMPLEX;*/
> 
> Thanks! After this fix it is working ok. Any chance to see the proper 
> fix in -stable kernels for at least 2.6.18.x and 2.6.19.x?
> 
> 
> Thanks,
> 
> Grzegorz Kulewski
> 

I was wondering the same thing. While I could patch the kernel, and make 
a custom build. I prefer not to, and just upgrade to a newer version.

/Patric
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ