linux-kernel - Re: [BUG] Strange 1-second pauses during Resume-from-RAM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20071115181418.GA6603@ucw.cz>
Date:	Thu, 15 Nov 2007 18:14:18 +0000
From:	Pavel Machek <pavel@....cz>
To:	Mark Lord <liml@....ca>
Cc:	Thomas Gleixner <tglx@...utronix.de>, len.brown@...el.com,
	Andrew Morton <akpm@...ux-foundation.org>,
	linux-kernel@...r.kernel.org, linux-pm@...ts.linux-foundation.org,
	rjw@...k.pl
Subject: Re: [BUG] Strange 1-second pauses during Resume-from-RAM

Hi!

> I have been reporting this off and on since 2.6.23 was released.
> This problem was not apparent up to perhaps 2.6.23-rc8,
> but definitely became common in 2.6.23 and 2.6.23.1.
> 
> Most of the time, a resume-from-RAM on my notebook takes about 2.1 seconds
> of kernel time to complete.
> 
> Once in a while, it takes *much* longer, in the 14-20 second range.
> These long events *seem* to be mostly after the notebook has been
> in suspend for a longish time, but there's really nothing consistent here.
> 
> So git-bisect isn't going to work for this one.   I recently rebuilt the 
> kernel
> to include printk timestamps, and then it went 2 days without the issue 
> happening,
> until this morning (after an overnight suspend) finally.
> 
> The machine is a Dell Inspiron 9400, Intel chipset + Core2Duo 2.1GHZ w/3GB 
> DDR2.
> PCIe express chipset, ATI graphics, SATA hard drive.
> 
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
> Express Memory Controller Hub (rev 03)
> 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
> Express PCI Express Root Port (rev 03)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
> Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 1 (rev 01)
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 2 (rev 01)
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 
> 4 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
> (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
> (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
> (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
> (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface 
> Bridge (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial 
> ATA Storage Controller IDE (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
> 01)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility 
> X1400
> 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX 
> (rev 02)
> 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
> 03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 
> SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
> 03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
> 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host 
> Adapter (rev 0a)
> 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
> 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network 
> Connection (rev 02)
> 
> There's also a USB2 hub connected, with the Logitech mouse being the
> only thing plugged into it at present.
> 
> The best clue I have of what is happening, other than that it was first
> seen during the late 2.6.23-rc* series, are the following two sets of
> kernel logs.  The first set is from a "normal" fast wake-up,
> and the second set is from the "slow" wake-up seen this morning.
> 
> Both logs show the same information, in pretty much the same order.
> The BIG difference is a bunch of unexplained pauses of exactly 1-second
> each that occur during the slow wakeup.
> 
> The only other difference is that the SATA disk messages are placed
> differently within the two logs.  I'm thinking on that one but it
> doesn't look significant to me.
> 
> The real question is, why the 1-sec pauses?

Can you try nohz=off highres=off? Strange stuff is happening with
nohz.
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/