[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <Pine.GSO.4.58.0711161613070.9346@denali.ccs.neu.edu>
Date: Fri, 16 Nov 2007 16:30:46 -0500 (EST)
From: Jim Faulkner <jfaulkne@....neu.edu>
To: linux-kernel@...r.kernel.org
cc: Jim Faulkner <jfaulkne@....neu.edu>
Subject: sb live (emu10k1) stops working between 2.6.23.1 and 2.6.23.7
Hello,
I have an SB Live Value card which uses the emu10k1 driver. I use digital
output to an external amplifier. This has worked fine for many years, up
to and including kernel 2.6.23.1. Under 2.6.23.7, I have been unable
to get any audio output. I get the following errors when loading my
asound.state under 2.6.23.7 using `alsactl restore`:
alsactl: set_control:991: warning: name mismatch (IEC958 Playback
Mask/IEC958 Playback Default) for control #222
alsactl: set_control:993: warning: index mismatch (3/0) for control #222
alsactl: set_control:993: warning: index mismatch (0/1) for control #223
alsactl: set_control:993: warning: index mismatch (1/2) for control #224
alsactl: set_control:985: warning: iface mismatch (3/2) for control #225
alsactl: set_control:987: warning: device mismatch (2/0) for control #225
alsactl: set_control:989: warning: subdevice mismatch (0/0) for control
#225
alsactl: set_control:991: warning: name mismatch (IEC958 Playback
Default/SB Live Analog/Digital Output Jack) for control #225
alsactl: set_control:993: warning: index mismatch (2/0) for control #225
alsactl: set_control:995: failed to obtain info for control #225
(Operation not permitted)
I receive no errors when I load my asound.state under 2.6.23.1.
Under 2.6.23.7, I get the message "No digital data" on my external
amplifier, which normally I only see when the computer is powered down or
rebooting. I do not get that message under 2.6.23.1, even when no audio
is being played.
I've tried copying down my alsamixer settings under 2.6.23.1, and
re-entering them under 2.6.23.7, however I have still been unable to get
any audio output.
Here is the relevant part of my `lspci -v`:
05:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
Subsystem: Creative Labs CT4780 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 23
I/O ports at dce0 [size=32]
Capabilities: [dc] Power Management version 2
Please let me know if you need any more information, and please CC my
e-mail address on any correspondence, since I am not subscribed to this
list.
thanks,
Jim Faulkner
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists