linux-kernel - RE: 2.6.23.1 - sata_mv (7042) hang with large file operations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <BD261180E6D35F4D9D32F3E44FD3D901053E853F@EMPBEDEX.empirix.com>
Date:	Thu, 15 Nov 2007 19:07:56 -0500
From:	"Morrison, Tom" <tmorrison@...irix.com>
To:	"Mark Lord" <liml@....ca>
Cc:	"Jeff Garzik" <jeff@...zik.org>, <linux-ide@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: RE: 2.6.23.1 - sata_mv (7042) hang with large file operations

In the case of PCI (am no big expert on this)- I believe the code
allows you to address 32 bits at a time...you can see the the 
effectve address resource address is some where around 
0xea900000 - but, if you have PHYS_64BIT  & PTE_64BIT - 
you get resource_types of 64bits...that you can manipulate accordingly.
 
In the case of the eDMA - its 64bit dma operations - thus, you 
setup the hi portion (by shifting twice by 16 (you get compiler 
warnings if you try to shiftg the size of the offset - a bug IMHO))
and thus, can play the game I mentioned below and use the power 
of the PEX inbound/outbound translation windows to move your data 
correctly to the appropriate 32 bit location...
 
This game works fine very well for 2.6.11 + kernel  - there are a few 
more tests I need to do (like setting mem=<just below the PEX space> 
and see if it works correctly...and then try again just a little bit above 
PEX memory space (> ~0xea900000) - if it works below & doesn't work
above - it points to a problem with sata_mv doing some type of operation
outside the dma engine that is corrupting memory - 
 
Thats another issue how does memory dribble/scribbling (only side affect 
I can think of if something is going wrong with this translation)?
 
I'll try your 'patch' and see if that has any affect as well (and the
associated side-affects...)
 
t
 
 

________________________________

From: Mark Lord [mailto:liml@....ca]
Sent: Thu 11/15/2007 5:14 PM
To: Morrison, Tom
Cc: Jeff Garzik; linux-ide@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: 2.6.23.1 - sata_mv (7042) hang with large file operations



Morrison, Tom wrote:
> The plot thickens - it looks like it might be some type
> of problem interacting with the setup of my 4Gig DDR memory
> and how I setup some translation windows in my MPC8548E
>
> I realized this morning that I have an inbound/ output PEX window
> Translation Setup for mapping all from/to PEX bus to outside
> the physical 4GIG memory space (i.e.: up at 0xC_xxxx_xxxx). Thus,
> all output operations that translation from 0xC_xxxx_xxxx to
> the pci 32 bit address of xxxx_xxxx) - and vice versa for for
> the inbound. Note: we also have a straight 1:1 translation mapping
> as well for the lower 4Gig - so that's why this worked without
> the below mentioned change...
>
> So, I changed the Request & Response Hi Addresses (which were
> Being shifted by 32 bits down anyways) and 'OR' that with my
> 0xC (so the effective 64bit DMA address is 0xC_xxxx_xxxx (where
> Xxxx_xxxx is the effective address). This was what we did to
> solve the problem with the Marvel Linux driver that we got from
> the Marvel site....
>
> This all works just fine with ONLY 2 gig of memory in the system
> (and still have these inbound/output pex translation windows),
> but fails when I put back the 4 Gig (and the 8Gig) DDR memory.
>
> Unfortunately, this still hasn't solved the problem though -
> so there is something else which I am not seeing?
..

I don't know much about how 32-bit PPC deals with memory addresses
that are more than 32-bits..

But does this patch have any effect:


--- old/drivers/ata/sata_mv.c   2007-10-12 12:43:44.000000000 -0400
+++ linux/drivers/ata/sata_mv.c 2007-11-15 17:12:24.000000000 -0500
@@ -685,7 +685,7 @@
 {
        int rc;

-       if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+       if (0 && !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
                rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
                if (rc) {
                        rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/